Thank you, Al! This is the first time I have ever built one of their kits. They don’t have many planes though. They mostly make 1/72 armor (which is right up your alley!) and small ships. Not sure if Andy’s HHQ ships over there. He has a lot of Flyhawk kits. andyshhq.com/collections/flyhawk
@@DrewsModelsas with most countries it depends where you are. Here in Wellington, it’s generally pretty mild, the winter temp rarely falls below 5 degrees C, further south it’s likely to be 1-3 degrees C. Of course it drops below freezing in the high country of both islands. Rain? Oh yes, it’s quite a wet place, and Wellington has a well-earned reputation for being very windy! Take care out there.
Turned out beautiful. I do have a question though . How do you keep the tape from pulling off the paint. I’ve had zero luck with Vallejo paint not being pulled up with the tape
Thank you! Use a good primer, either rattle can or Badger Stynlrez. Stynlrez is the best acrylic primer hands-down. It’s also bottled as Mig One Shot primer and UMP bottles it for their primer as well. I’ve never had an issue with Vallejo paint lifting when I use this primer! Never put water-based acrylic paint on bare plastic. Always use a primer. Take care! Drew
This is a great little kit. Great build Drew . The only thing I m o this kit lacks is a flight crew. I used the crew from the Airfix Helldiver to remedy this shot coming on my build. As for the tiny delicate pieces yes they are using a good quality spree cutter is a must along with a sharp # .11 blade
Oh @Drew'sModels there's this video game you might like it's called Sky on fire:1940 it's about the battle of Britain and it has different types of short missions you can do, and also has like a Short Mission called Combat Above Dover is were you can choose your own plane and how swaudmates you want and the start altitude and the difficulty (0-100) but it usually puts you at 40 for a start but you can change it. It was a little video game suggestion for you.
Nice build Drew, I enjoyed the video!
Thank you, Brett!
Great result Drew. I have never built a model from this company so may have to some day.👏👏👏👏
Thank you, Al! This is the first time I have ever built one of their kits. They don’t have many planes though. They mostly make 1/72 armor (which is right up your alley!) and small ships. Not sure if Andy’s HHQ ships over there. He has a lot of Flyhawk kits. andyshhq.com/collections/flyhawk
flyhawk is a quality and detailed brand I think, amazing build, Drew. ❤😍
@@ArdeconHobby Thank you!
Nice result Drew. Sadly Flyhawk isn’t a brand we see much of in NZ.
Thank you, Don. Maybe an online hobby shop has Flyhawk models? Take care! Just curious…what are winters like in NZ?
@@DrewsModelsas with most countries it depends where you are. Here in Wellington, it’s generally pretty mild, the winter temp rarely falls below 5 degrees C, further south it’s likely to be 1-3 degrees C. Of course it drops below freezing in the high country of both islands. Rain? Oh yes, it’s quite a wet place, and Wellington has a well-earned reputation for being very windy! Take care out there.
@dongorski4822 I would love to visit NZ! Take care, Don.
@@DrewsModelswelcome any time!
And I got like 667 views in last 28 days and I've reached to 3,023k views
@@KansasCityChiefsFan82 That’s cool! 😎
@@DrewsModels and also I'm learning how to speak in Japanese to
Turned out beautiful. I do have a question though . How do you keep the tape from pulling off the paint. I’ve had zero luck with Vallejo paint not being pulled up with the tape
Thank you! Use a good primer, either rattle can or Badger Stynlrez. Stynlrez is the best acrylic primer hands-down. It’s also bottled as Mig One Shot primer and UMP bottles it for their primer as well. I’ve never had an issue with Vallejo paint lifting when I use this primer! Never put water-based acrylic paint on bare plastic. Always use a primer. Take care! Drew
This is a great little kit. Great build Drew . The only thing I m o this kit lacks is a flight crew. I used the crew from the Airfix Helldiver to remedy this shot coming on my build. As for the tiny delicate pieces yes they are using a good quality spree cutter is a must along with a sharp # .11 blade
Thank you! There are resin figure sets on eBay that have both the pilot and rear gunner. I should have got a set.
And how are you doing
@@KansasCityChiefsFan82 Hi Caleb! Doing well.
@@DrewsModels I just woke up and saw your replys and sorry if I didn't see them an hour ago because I was a sleep
Oh @Drew'sModels there's this video game you might like it's called Sky on fire:1940 it's about the battle of Britain and it has different types of short missions you can do, and also has like a Short Mission called Combat Above Dover is were you can choose your own plane and how swaudmates you want and the
start altitude and the difficulty (0-100) but it usually puts you at 40 for a start but you can change it. It was a little video game suggestion for you.
One more thing @Drew'sModel um I won't be at school on August 7 because I got fair and the goat show you can come and see the 4-H fair of you like?
@Drew'sModel I got my first conquest Victory on European war 4 Napoleon for the 1775 America Conquest as Great Britain
What color would I use if I were to use spray paint for the fuselage instead of an airbrush
Tamiya AS-19
www.tamiyausa.com/shop/spray-aircraft/as-19-intermediate-blue-usn/100ml-spray-can/
@@DrewsModels thank you
Nice job!!
Thank you, Pam! It’s been a minute! Rediscovered a childhood hobby. Take care!