Cricut Keychains: Ultimate Guide to Vinyl Acrylic Keychains

Поделиться
HTML-код
  • Опубликовано: 24 ноя 2024

Комментарии • 88

  • @jenselle2933
    @jenselle2933 2 года назад +3

    I’m gonna have to start a business so I can write off all these supplies from your videos! 🤣🤣🤣. You are totally inspiring me! Thank you!

  • @LisaVornhagen
    @LisaVornhagen 2 года назад +2

    Those all look really great! Adding the UV resin is a good idea. They'll last a lot longer that way.

  • @dwinters2022
    @dwinters2022 7 месяцев назад +3

    Another great video, as always! Thank you!

  • @eamoroso56
    @eamoroso56 2 года назад +1

    Thanks, just started getting into sublimating keychains but these look fun too.

  • @smiley5818
    @smiley5818 2 года назад +2

    Love, love, love! So afraid of trying anything resin-thanks for alleviating my fears by making it look easy! 💕

  • @nancygallegos68
    @nancygallegos68 6 месяцев назад +2

    thank this so helpful

  • @karengroh8287
    @karengroh8287 2 года назад +1

    Thank you for sharing Angie. Your tutorials are great. I am definitely going to try making key chains.

  • @tenishawashington9923
    @tenishawashington9923 2 года назад +1

    New to the cricut world. Thanks for making this so simple!

  • @carlatownsend9647
    @carlatownsend9647 2 года назад +1

    Brilliant video, I've been a bit scared of using resin but seeing this with one bottle, I might just give it a shot. Thanks :)

  • @zullo3529
    @zullo3529 2 года назад

    I love this tutorial. That UV resin is so easy to use! I hand never seen it before! Thanks Angie

  • @trish2826
    @trish2826 2 года назад

    I'm literally making keychains this week and thought about adding a sealer. I thought it was much harder to do, thank you for the tutorial! I cant wait to try it!

  • @michellebushnell7012
    @michellebushnell7012 2 года назад +1

    Amazing video. I make these to sell and I also paint 2 or 3 layers of Acrylic paint to the back then UV resin over the paint.

  • @raquelrivera33
    @raquelrivera33 2 года назад +1

    I'm in love with ur videos u have helped me so much.

  • @cowgirlhorse18
    @cowgirlhorse18 2 года назад

    Thank you for sharing the advise for the head gun to het rid of the Bubbels is amazing. And I never new there was a white uv.

  • @vjstroup
    @vjstroup 2 года назад +1

    I have made a few keychains before. I did try using resin to seal but it was an epic fail for me lol. I'm looking forward to trying again! Thank you for sharing your skills!

    • @AngieHolden
      @AngieHolden  2 года назад +1

      You can do it!

    • @vjstroup
      @vjstroup 2 года назад

      @@AngieHolden Thank you Angie!

  • @147ILoveVintage
    @147ILoveVintage 2 года назад +1

    I am going to make this😊 thank you

  • @thejoyfullilyandco9537
    @thejoyfullilyandco9537 2 года назад +1

    Oh this looks so fun! Thanks for the tutorial! Off to order the UV light now. 🤣

  • @Lena-cq1nz
    @Lena-cq1nz 11 месяцев назад +1

    That helped a lotttt ..thank you so much

  • @susanruppel434
    @susanruppel434 2 года назад +1

    Hi! Have I told you I LOVE learning from you,!

  • @LorraineCastellon-Rowe
    @LorraineCastellon-Rowe 2 года назад +1

    Great video Angie!! I love all those designs!! They're all so cute!! Thank you for all of the instructions!!
    I hope you and your family have a fun and safe 4th of July!!
    🇺🇸❤️🤍💙🇺🇸❤️🤍💙🇺🇸

  • @judyracher4713
    @judyracher4713 7 месяцев назад +1

    Great Video, Cool ideas Thank you

  • @yvonnetucker1416
    @yvonnetucker1416 2 года назад +1

    love it

  • @susanolmo4516
    @susanolmo4516 2 года назад +1

    AWESOME!

  • @faithwilliams1528
    @faithwilliams1528 2 года назад

    Thanks for sharing!!! I learned something new.

  • @runaroundsueaccessibletrav6357
    @runaroundsueaccessibletrav6357 2 года назад

    I have been doing
    This for while it's Interesting

  • @MyNailsandMorebyJohna
    @MyNailsandMorebyJohna 2 года назад

    great video loved it

  • @lisahughes3012
    @lisahughes3012 2 года назад +1

    i like your video

  • @BrendaFaye
    @BrendaFaye 2 года назад +1

    Hey Angie, thanks for the tutorial. Like always you have done a great job! I wanted to find out more about the acrylic blanks.
    Can you cut the blanks out in Cricut for different sizes, shapes and different uses? Like bookmarks. Then adding flowers to them and sealing with resin? Thanks for the help. Brenda

    • @AngieHolden
      @AngieHolden  2 года назад

      The Cricut can cut REALLY thin plastic but nothing that would be sturdy enough for a project like this one.

  • @Muskette04
    @Muskette04 2 года назад +1

    I like the one you made with sun rising how did you make that? Do you have a tutorial for that one?

    • @AngieHolden
      @AngieHolden  2 года назад

      It is just vinyl placed on the keychain similar to the others I demonstrated.

  • @beckyhinojosa4012
    @beckyhinojosa4012 2 года назад +1

    My first time trying this exact method today except that when i used the heat gun my little keychain started flying away! How do we keep that from happening, use an old cutting mat? Thanks, love all your work!!

    • @AngieHolden
      @AngieHolden  2 года назад

      My heat gun does not blow that hard. If you are having issues, I would use tape or an old cutting mat.

  • @TePau100
    @TePau100 2 года назад +1

    Great video, Angie. I presume that if you are using the UV resin it woulde be ok to use removeable vinyl?

  • @sweetpotato..
    @sweetpotato.. 2 года назад

    Aww could you do more UV resin videos please

    • @AngieHolden
      @AngieHolden  2 года назад

      I might actually! It is really awesome!

  • @susanruppel434
    @susanruppel434 2 года назад +1

    How do you get the bubbles out? Ooops you answered in the video!

  • @MileyonDisney
    @MileyonDisney 2 года назад +3

    Does Cricut have any plans to fix their Print and Cut? EVERYBODY complains that the cut is always off the print and never cuts right. No, calibrating doesn't fix it. They need to work on it and get it right.

  • @yolandabranner6200
    @yolandabranner6200 Год назад +1

    Hi Angie I was watching your video on vinyl on acrylic and resin. I was wondering if you can help me out? Is it possible to put resin on faux leather also how can I add faux leather on acrylic?

    • @AngieHolden
      @AngieHolden  Год назад

      I guess you could put resin on faux leather. It may need a seal coat which I do not cover here. And you could add faux leather to acrylic but you would need an adhesive.

    • @yolandabranner6200
      @yolandabranner6200 Год назад

      @@AngieHolden thank you

  • @vickylimta
    @vickylimta Год назад +1

    Does the surface even out as you're pushing the resin around?

  • @Krissy92
    @Krissy92 Год назад +1

    Hello. Where did you get the key chains.

    • @AngieHolden
      @AngieHolden  Год назад

      I have linked everything I used in the description below this video. On computer, scroll down and click show more. On mobile, swipe up on the video or click the arrow to expand the description.

  • @oaktownchick
    @oaktownchick 2 года назад +1

    Can we use gel nail polish instead of resin? Trying to find a low budget option.

  • @papichula27
    @papichula27 Год назад +1

    is the shimmer vinyl shimmery on both sides?

  • @jenselle2933
    @jenselle2933 2 года назад +1

    If our resin got a little on the back side is there a good way to get it off? Unfortunately it’s dried

    • @AngieHolden
      @AngieHolden  2 года назад

      There is not.

    • @jenselle2933
      @jenselle2933 2 года назад +1

      @@AngieHolden bummer. Although maybe we just add some to the back too 😀

  • @deborarichesmorrison2134
    @deborarichesmorrison2134 2 года назад

    These look great. Can you add colour to the UV resin?

    • @AngieHolden
      @AngieHolden  2 года назад

      I have not tried adding color myself!

  • @barbwalker2934
    @barbwalker2934 2 года назад +1

    When you use the Monogram do you need to mirror it?

    • @AngieHolden
      @AngieHolden  2 года назад +1

      If you put on the front, no reason to mirror. If you put on the back, then you would mirror.

    • @barbwalker2934
      @barbwalker2934 2 года назад

      Thanks so much love watching your uTubs!

  • @carolwarren-avonind.repsal754
    @carolwarren-avonind.repsal754 2 года назад

    Thank you. I used your code to get the resin in clear and white and the machine. I think this is a game changer. Will it work with engraving too?

    • @AngieHolden
      @AngieHolden  2 года назад

      Sure! You should be able to add the resin to other projects as well!

  • @kzoogal69
    @kzoogal69 Год назад +1

    my small letters always seem to not stay on the mat, if that makes sense, or the design gets all messed up. Any suggestions??

    • @AngieHolden
      @AngieHolden  Год назад

      Try this: ruclips.net/video/7dbQIQp0CGo/видео.html

  • @hersheyqueenlisa
    @hersheyqueenlisa 2 года назад

    Do you have a link for the sealer? Thanks for a really great video!

    • @AngieHolden
      @AngieHolden  2 года назад +1

      Added to the description below the video.

  • @theresahawk9404
    @theresahawk9404 2 года назад

    Could you add mica or fine glitter to the us resin?

  • @micnitram2006
    @micnitram2006 2 года назад

    Can you add glitter to UV resin? What about mics powders? I would imagine if it blocks the light it wouldn’t work…but….🤔

    • @AngieHolden
      @AngieHolden  2 года назад

      I haven't tried yet actually!

  • @conniedingman6978
    @conniedingman6978 2 года назад

    Can I get the links where you bought the supplies

    • @AngieHolden
      @AngieHolden  2 года назад

      I always add links to the supplies I use in the description below the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video.

  • @sweetpotato..
    @sweetpotato.. 2 года назад

    How would you do it if you want to put a photo of someone?

    • @AngieHolden
      @AngieHolden  2 года назад

      The easiest way would be to use a sublimation printer with sublimation ink and a sublimation coated keychain. Otherwise, you would use printable vinyl with a clear vinyl over it then UV resin over that.