My machine stopped in the middle of a big project with a tight timeline. Naturally I raced right out and bought a duplicate. Finally found the time and your video. Thank you so much! Saved me a trip across town and a repair fee.
Thank you so very much..all other videos that i have watched, tells you to undo the hook gear to adjust the timing, and me being a newby, thinking that I had bought a dodgy one, and after readjusting the timing about twenty times for it to quickly go out of time! My problem was the actual shaft was not tight enough..🤷♂️. Your a great tutor and I wish you and your loved ones the happiest of holidays. Much respect..Rob.
Very nice, thank you for sharing. Some people are cery willing to learn and fix things themselves, for curiosity or for saving money. Sone people will still prefer to take it to a shop instead, and that is good too.
@Cold Blue yes, it was a new machine and after a needle strike the bobbin wouldn't catch, I followed the steps in the video and and it hums perfectly, even sews through 4 layers of suede. Saved me a ton on taking it to get repaired
I did what you said and it fixed it for about 5 minutes and now it’s off of alignment again. I’m sewing through a single layer of fabric and my needle is hitting that metal spinner again. I’m about to trash a sewing machine that’s new and only been used about 5 times. It’s a singer heavy duty model 4452. I’ve never even sewn anything considered heavy duty with this machine.
hi! I have the same exact model of this sewing machine - and all of a sudden it wouldn't go out of S1 mode! Doesn't matter which type I choose (straight/zigzag), it's constantly in the S1 mode. This just happened suddenly when I was using S1 mode one day and tried to turn out of it but it didn't happen. Just wondering if this is the issue of the needle timing too, or is there other issue? and which video would you direct me to look at to have that fixed? Thank you so much!
4:26 Hi! Thanks for the video. I have a question for clarification: did you replicate the same procedure for the needle in the right position as well for the hood/needle location or did you leave the distance as shown in the video greater than the left side? If not, is there a reason when to check left side timing vs right side timing? I remember seeing another helpful video you did but it was specific to check the needle bar height for only that adjustment (without manually also adjusting the hook) on the right side…? Just making sure I’m not misunderstanding or missing when to do both sides or when only left/only right matters? Thanks so much!!
Help! My entire needle went through all the way down to where the bobbin is. I managed to relief the needle, but the top mechanic part, is stuck in the bottom position. How can I fix it?
Hello - I tried to tighten the little screw on the bobbin case to tighten the tension, but unfortunately I went too far. Therefore the little screw fell out causing all the parts to fall out. I tried putting them back together, but somehow I think I lost a piece. I am wondering whether you could do a vid demonstrating how to disassemble a singer Heavy Duty 4411 bobbin case and reassemble it, so I know whether I have all the parts and where each piece goes. Thank you in advance
how to fix still loose stich at the back even the tension is in maximum tight that I can hardly pull the thread as i set the tension. my machine is singer and also top loading bobbin.
Thank you for the marvellous video. Just watched loads, but I still have a problem. My needle is scraping against the metal bobbin holder. How can I fix it please 🙏
I have a Heavy Duty 4423 that just doesn't run. I've looked for a fuse but I can't find one. I know there is electric power up to the end of the power cord where it plugs on the machine but it wont run. Please help!
Necesito tu ayuda me compré mi máquina singer heavy duty hace 3 meses por Amazon y apenas me empezó a fallar pero Amazon no me hace válida la garantía, quisiera saber si es un defecto de fabrica o lo puedo arreglar, los dientes de arrastre se van de lado , es decir que no entran en los orificios correspondientes en la placa metálica y por ende la manija manual se traba no se mueve ni la aguja y el motor se escucha forzado, que hago ... HELP !!! 🙏
My wife's machine is the same model as shown in this video, the 4411. After setting the hook timing and needle height as shown, the zig zag will mostly sew a straight line when using a stitch length of 4 (i.e. it skips the right side of the stitch most but not all of the time) but will correctly sew using a length of 1. When I try a straight stitch it will frequently skip stitches regardless of the length. I am baffled by this. I have the Singer manual and have centered the needle as specified therein. I have of course installed a new needle, cleaned the lint, greased and oiled the gears, etc. What am I missing?
There's a small white +- button on right top hand, try adjusting that using a coin or screw driver. It could be that the settings are changed here. This is usually to adjust the stich depending on the material being used. I'm just guessing but there's no harm in trying. You can read more about it on the user manual.
Question. When the timing is off does the machine make a buzzing noise as well? My machine is making a buzzing noise as if I have my foot on the peddle just enough to start it in gear but not moving the needle. But if I push harder on the peddle its starts to sew fine. What could this be???
I have the Singer Heavy Duty 4452, and I have a question regarding the stitches formed with the needle position in the center. When I put the needle in the center position, I end up with loopy threads on the bottom of the fabric. However, If I change to either the right or the left, it sews perfect stitches. I've adjusted the tension, changed the needle, rethreaded, cleaned the lint, etc, but I can't get the machine to sew a nice seam in its center position. Could you please help me with a direction as to where to go with this? I miss sewing, and I so wish I could figure out how to resolve this issue. Thank you kindly for any help you can provide! :)
Hi , Recently I bought old singer 5050c and it is having thread hook timing problem. The problem is I can not find the service manual anywhere and also which screws to adjust at the bottom of the sewing machine. Appreciate if anyone can help me with this issue. Thanks.
Anytime I try to move my hook the needle moves with it so it can not line up and it just doesn’t change???!!!! Also I loosened the Alan key screws on the bottom so much to the point one fell out bc I couldn’t get it to work so I figured I should try to loosen them more and after an hour I’ve given up and now idk what to do. Can anyone help??
![[DRAGON BALL LEGENDS REVEALS ＆ STUFF] LEGENDS FESTIVAL 2024 Special Edition Part 1](http://i.ytimg.com/vi/mV5bGIswTtQ/mqdefault.jpg)
Great video. Our local sewing machine repair shop quoted $190 for this adjustment. It took me 10 minutes after watching this video!
What a scam… that’s
Literally the price of the machine lol
Wow they really charge the price of the machine to repair it!?
Thank you for the close-ups and the detail you give in this adjustment. Much appreciated!
My machine stopped in the middle of a big project with a tight timeline. Naturally I raced right out and bought a duplicate. Finally found the time and your video. Thank you so much! Saved me a trip across town and a repair fee.
Thank you so much bro, I've learned so much and repaired my machine on my own!!! You saved me loads of money!!!
This video saved us a lot of headache and helped us repair our machine. Thank you very much
Thank you, because of you I am off sewing happily. My timing was sooo off a good tutorial.
Thanks for the video. I live in the North of Norway, without this video i would have to drive at least 7-8 hours to the closer workshop. Thanks!!!
Thank you so very much..all other videos that i have watched, tells you to undo the hook gear to adjust the timing, and me being a newby, thinking that I had bought a dodgy one, and after readjusting the timing about twenty times for it to quickly go out of time! My problem was the actual shaft was not tight enough..🤷♂️.
Your a great tutor and I wish you and your loved ones the happiest of holidays. Much respect..Rob.
Nice.
Very nice, thank you for sharing.
Some people are cery willing to learn and fix things themselves, for curiosity or for saving money.
Sone people will still prefer to take it to a shop instead, and that is good too.
Thank u so much brother I just followed your instructions you're a good teacher
Thank you, so much for this video. My machine is in perfect working order again and I don't have to buy a new one!
Thank you for teaching. Easy fix for mom's sewing machine.
This was exactly the repair my machine needed yesterday
@Cold Blue yes, it was a new machine and after a needle strike the bobbin wouldn't catch, I followed the steps in the video and and it hums perfectly, even sews through 4 layers of suede. Saved me a ton on taking it to get repaired
thank you very much, I was able to fix my mom's sewing machine
Great.
Awesome tutorial! Thanks for sharing your knowledge!! 👏🏼👏🏼👏🏼
Do you have a video on why the bobbing case pops out and how to fix it?, I have a singer 4432. thx
Love watching these videos. I learn so much!
Great video, close up really helped!
This is awesome, thank you!! 🙏
I did what you said and it fixed it for about 5 minutes and now it’s off of alignment again. I’m sewing through a single layer of fabric and my needle is hitting that metal spinner again. I’m about to trash a sewing machine that’s new and only been used about 5 times. It’s a singer heavy duty model 4452. I’ve never even sewn anything considered heavy duty with this machine.
Thanks!!
New sub.
New at sewing.
Really good video. Great work!!
Thanks so much great vid, saved me a bunch of time!!!!!
hi! I have the same exact model of this sewing machine - and all of a sudden it wouldn't go out of S1 mode! Doesn't matter which type I choose (straight/zigzag), it's constantly in the S1 mode. This just happened suddenly when I was using S1 mode one day and tried to turn out of it but it didn't happen. Just wondering if this is the issue of the needle timing too, or is there other issue? and which video would you direct me to look at to have that fixed? Thank you so much!
Can you do a video on how to replace the clamp? It’s broken on mine
Should needle touch that hook? Mine is
Best video on the topic! thank you
thank you So much !!! Save my life !
Thank you very much I am working on the same model today!
4:26 Hi! Thanks for the video. I have a question for clarification: did you replicate the same procedure for the needle in the right position as well for the hood/needle location or did you leave the distance as shown in the video greater than the left side? If not, is there a reason when to check left side timing vs right side timing? I remember seeing another helpful video you did but it was specific to check the needle bar height for only that adjustment (without manually also adjusting the hook) on the right side…? Just making sure I’m not misunderstanding or missing when to do both sides or when only left/only right matters? Thanks so much!!
Same.
Please help me make a tutorial on how to repair a Singer Heavy Duty sewing machine when the reverse button doesn't work.
So helpful! Thank you so much!!!!
i have a problem, when i’m loosing the shaft like what you did at 2:50, it’s not moving at all. do you have any tips on making it looser
Question: You only loosened that back gear? Not the gear under the hook?
Saved my day 🎉❤ Grazie 🙏🏼
Nice - concise with great details! Thank you!!
My stitch dial isn’t working it will only do a straight stitch. Is there anyway to fix this??
I need my Singer 241-11 serviced where are you in NY? I would like to hire you to tune up my machine
Help!
My entire needle went through all the way down to where the bobbin is. I managed to relief the needle, but the top mechanic part, is stuck in the bottom position. How can I fix it?
Just fixed mine! Thanks!!
❤ thank you… you’re the best
Thank you so much for this video
Thank you so much!
Where do I buy the 15 inch niddle from
My needle shifted to the left how can i fix it to get my quarter inch back ihave a model 44S
Hello - I tried to tighten the little screw on the bobbin case to tighten the tension, but unfortunately I went too far. Therefore the little screw fell out causing all the parts to fall out.
I tried putting them back together, but somehow I think I lost a piece.
I am wondering whether you could do a vid demonstrating how to disassemble a singer Heavy Duty 4411 bobbin case and reassemble it, so I know whether I have all the parts and where each piece goes.
Thank you in advance
Sorry
Very nice video sir
how to fix still loose stich at the back even the tension is in maximum tight that I can hardly pull the thread as i set the tension. my machine is singer and also top loading bobbin.
I have kinda trouble in my needle position, it doesnt work, would you like to help me
Hi, how to repair the needle position when the wheel does not move, in the singer heavy duty 4423?
I have a video
Thank you for the marvellous video.
Just watched loads, but I still have a problem. My needle is scraping against the metal bobbin holder. How can I fix it please 🙏
I have a video for this
I can't find the video, a link please?@@citysewing
Love it!!
I have a Heavy Duty 4423 that just doesn't run. I've looked for a fuse but I can't find one. I know there is electric power up to the end of the power cord where it plugs on the machine but it wont run. Please help!
Kak minta tolong dong buatkan tutorial cara memperbaiki mesin jahit singet heavy duti ktika kunci jhitnx gk berfungsi
Necesito tu ayuda me compré mi máquina singer heavy duty hace 3 meses por Amazon y apenas me empezó a fallar pero Amazon no me hace válida la garantía, quisiera saber si es un defecto de fabrica o lo puedo arreglar, los dientes de arrastre se van de lado , es decir que no entran en los orificios correspondientes en la placa metálica y por ende la manija manual se traba no se mueve ni la aguja y el motor se escucha forzado, que hago ... HELP !!! 🙏
Where can I get a cam feed for a HD110 C singer machine 🙏
Thank you!! ❤
My wife's machine is the same model as shown in this video, the 4411. After setting the hook timing and needle height as shown, the zig zag will mostly sew a straight line when using a stitch length of 4 (i.e. it skips the right side of the stitch most but not all of the time) but will correctly sew using a length of 1. When I try a straight stitch it will frequently skip stitches regardless of the length. I am baffled by this. I have the Singer manual and have centered the needle as specified therein. I have of course installed a new needle, cleaned the lint, greased and oiled the gears, etc. What am I missing?
There's a small white +- button on right top hand, try adjusting that using a coin or screw driver. It could be that the settings are changed here. This is usually to adjust the stich depending on the material being used. I'm just guessing but there's no harm in trying. You can read more about it on the user manual.
Use the left side to time the hook . Should be fine after.
Question. When the timing is off does the machine make a buzzing noise as well? My machine is making a buzzing noise as if I have my foot on the peddle just enough to start it in gear but not moving the needle. But if I push harder on the peddle its starts to sew fine. What could this be???
Oil
Thank you
I have the Singer Heavy Duty 4452, and I have a question regarding the stitches formed with the needle position in the center. When I put the needle in the center position, I end up with loopy threads on the bottom of the fabric. However, If I change to either the right or the left, it sews perfect stitches.
I've adjusted the tension, changed the needle, rethreaded, cleaned the lint, etc, but I can't get the machine to sew a nice seam in its center position. Could you please help me with a direction as to where to go with this?
I miss sewing, and I so wish I could figure out how to resolve this issue.
Thank you kindly for any help you can provide! :)
Provide picture
Somebody could help me pls? I want to know the name of the part that is above of the hook or bobbin on the right side
Hi ,
Recently I bought old singer 5050c and it is having thread hook timing problem. The problem is I can not find the service manual anywhere and also which screws to adjust at the bottom of the sewing machine.
Appreciate if anyone can help me with this issue.
Thanks.
Anytime I try to move my hook the needle moves with it so it can not line up and it just doesn’t change???!!!! Also I loosened the Alan key screws on the bottom so much to the point one fell out bc I couldn’t get it to work so I figured I should try to loosen them more and after an hour I’ve given up and now idk what to do. Can anyone help??
That was the fix!
Awesome!
You are the boss!
Hey mister, my handwheel blocked and I cannot find the reason why
My machine says EL and won’t work
Please give me information Hindi or urdu lenguage
PLS add in title exactly model name like SINGER 4423 or 4432
Ok
Is this a popular machine or do you see all lot of then coming in for repair because they're poor quality and break a lot?
Ayuda
A camera does dot belong on your. You can not view bouncy image with comfort.
Have a question, have a part dont know where it goes?