Its finally running again! Enjoy the install process! Lots of long nights getting her put back together. #hemi #cammed #mopar #SRT @EastCoastJeepSRT @RTLife
A excellent veiw. Appreciated watching it come back to Alive. It's a nicely done build with spec perfect part's that are of premium choice, Bud I like it alot! It sure sounded amazing with the open headers...Epic content my friend. Cheers
Well done. Hopefully you will do a complete run down on what you done to it. I'm keen to learn. What's the oil you put in it...run in oil? I see it wasn't the srt penzoil. Again congratulations.
Hi man! Hope you’re doing good… Any updates with this setup? I’m building my forged 392 that’s is going with Ripp (Vortech) Supercharger JT-H Trim upgrade. Looking for any advise. 🙏🏽
Great video Josh. I own a 2015 Grand Cherokee SRT, Red Vapor Edition. Absolutely love it, plan on keeping it forever. I need some advice... I just dealt with engine codes P219A & P0303. It ended being a seized lifter on cylinder 3. Cam was damaged... I ended having a shop rebuild the top half of my motor, from the cam up. The cam showed other wear as well, I am at 176K miles. I've spent $7,800 on that work, to learn I have metal in my oil pan. That's what they found after test driving for 10 miles, low oil pressure light comes on and my engine stalls. I'm kicking myself in the ass for not buying a new motor. Do I spend more money on a new block and try to salvage the money I already spent? Or do I just say screw it and get a new engine for $7,600 + labor? They say if they pull the crankshaft to confirm where the metal is coming from, it could be to rebuild the crankshaft and worst case machine the block and rebuild it. I could get a new block for around $4,800, but then there's all the labor behind it. What would you do...? Just looking for some advice. I'm going on week 3 without my SRT. I'm not a mechanic... I'm torn with eating what I've spent and getting a new motor installed. Thoughts?
except i have a 2012 SRT8 392 Challenger 60k miles. Was having misfires in cylinder 5, ended up being cam and lifters got the top end rebuilt and 8 miles from me picking it up the bottom end takes a shit. Getting bottom rebuilt now
@@srtbubbz I ended buying a new motor. Got a brand new one for $6,000, after install it was around $7,600. They helped me out after what I went through. So far, so good.
I’d have to ask the tuner. Did the first oil change after 30 minutes of running after the install. Will run this oil for a hundred miles or so then switch to something better. I’ll keep you posted
IT LIVES!! Good work!
Thanks!
I've been waiting for this moment! Sounds strong! Well done!
Thanks for watching!
Looking forward to the next videos.
Thanks! It’s getting tuned on Wednesday so we’ll be able to go for a drive 👍🏼
Stoked for you, man! Can’t wait to see it out and about.
Appreciate it! Gets tuned tomorrow!
A excellent veiw. Appreciated watching it come back to Alive. It's a nicely done build with spec perfect part's that are of premium choice, Bud I like it alot! It sure sounded amazing with the open headers...Epic content my friend. Cheers
Appreciate it thank you!
Nice. Love watching the updates.
Thanks!
Keep up the good work.. I love my Jeep TOO!!!!!
Fire content bro amazing format
Hard work and dedication.
Thanks!
Thank you for video, it was interesting and usefull
You’re welcome!
Very Good Job !!!
Thanks!
Good work man, keep up
Thanks!
Finally 😍
Yes!
Welcome back
Thanks! 👍🏼
good job buddy
Thanks!
Well done. Hopefully you will do a complete run down on what you done to it. I'm keen to learn. What's the oil you put in it...run in oil? I see it wasn't the srt penzoil. Again congratulations.
More videos to come! I used break in oil that I got from my tuner. He has it in bulk so I just brought some random containers and he filled them 👍🏼
Waiting for the next video
Soon 👍🏼
Now I wanna do my jeep
It’s an experience that’s for sure!
Hi man! Hope you’re doing good… Any updates with this setup? I’m building my forged 392 that’s is going with Ripp (Vortech) Supercharger JT-H Trim upgrade. Looking for any advise. 🙏🏽
How long did it take you to pull the motor
4:00 Man, I feel claustrophobic!
Gotta do what ya gotta do!
Also this was around midnight when Meagan got home from work. This is how she found me lol
@@JoshShare when Your partner is a car enthusiast, you know where to find him ;)
@@Piki279 in the garage, if you don’t see them, check UNDER the car 🤣😂
Great video Josh. I own a 2015 Grand Cherokee SRT, Red Vapor Edition. Absolutely love it, plan on keeping it forever. I need some advice... I just dealt with engine codes P219A & P0303. It ended being a seized lifter on cylinder 3. Cam was damaged... I ended having a shop rebuild the top half of my motor, from the cam up. The cam showed other wear as well, I am at 176K miles. I've spent $7,800 on that work, to learn I have metal in my oil pan. That's what they found after test driving for 10 miles, low oil pressure light comes on and my engine stalls. I'm kicking myself in the ass for not buying a new motor. Do I spend more money on a new block and try to salvage the money I already spent? Or do I just say screw it and get a new engine for $7,600 + labor? They say if they pull the crankshaft to confirm where the metal is coming from, it could be to rebuild the crankshaft and worst case machine the block and rebuild it. I could get a new block for around $4,800, but then there's all the labor behind it. What would you do...? Just looking for some advice. I'm going on week 3 without my SRT. I'm not a mechanic... I'm torn with eating what I've spent and getting a new motor installed. Thoughts?
I’m literally in the same boat word for word
except i have a 2012 SRT8 392 Challenger 60k miles. Was having misfires in cylinder 5, ended up being cam and lifters got the top end rebuilt and 8 miles from me picking it up the bottom end takes a shit. Getting bottom rebuilt now
@@srtbubbz I ended buying a new motor. Got a brand new one for $6,000, after install it was around $7,600. They helped me out after what I went through. So far, so good.
Where did you learn how to do this?
I have 6.4 hemi engine was on charger scatpack 2017 can i install this engine on grand Cherokee srt 2014 ?
did you remove ac condenser?
What oil are You using ? Regular srt one or something better for forced induction?
I’d have to ask the tuner. Did the first oil change after 30 minutes of running after the install. Will run this oil for a hundred miles or so then switch to something better. I’ll keep you posted
Could I swap a 3.6 for a 5.7 in a grand Cherokee ?
I got a 2011 jeep cherokee 3.6 I wanna put a new motor in it, appreciate the content
So if I had a 3.6 I could get a 5.7 engine and swap em ?
@@uchihasfinest1506yes
I have a 2014 grand Cherokee limited u think I can put a SRT or trackhawk engine in it
You can ..
But finding the right person to do the job is the hard part .