It's very common but not normal. System is very dependent on clean and proper oil. If I run into the problem, I always check oil level and milage since last service .
Awesome video. Thank you! Did you share the link to the scanner and I miss it? Is it true you can disconnect the negative terminal to clear codes as well?
Same thing going on here and I just got it back from the dealer service center today and thought they may have screwed something up. Thanks for making this bud! 👍🏼
Hopefully, you didn't spend too much time trying to fix the remote start. Wonder what Fords reasoning was behind that? Thanks for watching and commenting.
Hello, thank you for the video. I bought my car, a Ford S Max, and it only has one key. I wanted to add another key. I bought a second used key, but the same number. I took it to the key programmer, and after attempts and difficulty, he programmed the key for me, but it only works when you put it inside the key place, and it does not work remotely and does not shut down. The doors would not open. He told me that if I did as you did with the video, the key would work and be programmed. I tried several times, but the method did not work for me. Do you have any advice to offer me based on your great experience in this field? Thank you.
Might Have to get one from the dealer. Programming them can be quite difficult. Who knows, maybe the used one had issues before. Let me know how it works out for you. Thanks for watching and commenting.
I have a problem with remote on my Mustang. I do lock the car, everything is shut from hood to trunk. To try remote start I press the buttons on the remote, I see the remote flashing red light. But I can't see any response from the car no light or horn. I have changed the car battery as well as the remote battery and there is no check engine light I seek help!🥲 I dunno if it could the reason but I can't see the P of Parking in illuminated in red as the others if I shift to R,N,D,S. I can see them illuminated except the P.
I can understand disabling the remote start If you have a bad misfire or other engine damaging issue but a hvac code? That's crazy. Thanks for watching.
No Engine Light. Remote start still won't work. What I did notice is when I lock my truck it honks 2x indicating a door is open but all the doors are closed including the hood and no door ajar light is on...
Thank you so helpful 100 💯 glad I found your channel I will subscribe for this information you put out hard going all over the RUclips looking for the specific information. Thank you.
Hmm, maybe try clearing codes anyway. I'm not sure what codes Ford engineers use as cut off. Might have a not pcm code? Let me know how it works out for you. Thanks for watching
My F150 had a dead battery. I changed it out. hooked up the red and neutral and now remote start wont start. no check engine light. doors are shut... and hood sensor is making contact.
bought a 2013 Expedition..... remote start worked fine for a while then stopped.... the engine will fire up, and then stop.. took it to a local dealer then they started trying to milk me for as many hours as they could....... after 3 hours they said they still have no idea what was wrong BUT they could go deeper and get MyKey involved if i wanted for a few more hours, which they could not specify .... I told them NO and left, for all that money I could buy a different one installed..... Nobody can help me
Are there any trouble codes when it shuts off? Do you lose all electrical or just motor shuts down.? Let me know how it works out for you. Very interesting problem.
I definitely learn something I didn't know. Thanx Shaners!
You're very welcome. Thanks for watching and commenting.
So the cam shafts and the timing chain on eco boost is normal? I have that problem right now as we speak.
It's very common but not normal. System is very dependent on clean and proper oil. If I run into the problem, I always check oil level and milage since last service .
Thanks for posting this video, the same exact thing happened to my 2015 Ford Mustang, now I know why the remote start is not working
I like seeing comments about my videos helping people. I'm glad this one was able to help you. Thanks for watching and commenting.
Awesome video. Thank you! Did you share the link to the scanner and I miss it? Is it true you can disconnect the negative terminal to clear codes as well?
Yes, link is in the description. Glad you liked the video. Thanks for the positive feedback. I appreciate it.
Same thing going on here and I just got it back from the dealer service center today and thought they may have screwed something up. Thanks for making this bud! 👍🏼
Glad my video was able to help. Thanks for the great feedback.
‘14 escape same thing. “Wife states remote start not working “
Found faulty evap purge valve.
Hopefully, you didn't spend too much time trying to fix the remote start. Wonder what Fords reasoning was behind that? Thanks for watching and commenting.
@@shanersmechaniclife3164 i work on heavy equipment and Mack and cat always do stuff like this so as soon as I saw that light I knew where to start 🤙
Hello, thank you for the video. I bought my car, a Ford S Max, and it only has one key. I wanted to add another key. I bought a second used key, but the same number. I took it to the key programmer, and after attempts and difficulty, he programmed the key for me, but it only works when you put it inside the key place, and it does not work remotely and does not shut down. The doors would not open. He told me that if I did as you did with the video, the key would work and be programmed. I tried several times, but the method did not work for me. Do you have any advice to offer me based on your great experience in this field? Thank you.
Might Have to get one from the dealer. Programming them can be quite difficult. Who knows, maybe the used one had issues before. Let me know how it works out for you. Thanks for watching and commenting.
Mine stopped working since the throttle body was damaged, I already ordered the new throttle body I hope it works again
I hope it does too. Let me know how it works out for you. Thanks for watching and commenting.
I have a problem with remote on my Mustang.
I do lock the car, everything is shut from hood to trunk. To try remote start
I press the buttons on the remote, I see the remote flashing red light. But I can't see any response from the car no light or horn.
I have changed the car battery as well as the remote battery and there is no check engine light
I seek help!🥲
I dunno if it could the reason but I can't see the P of Parking in illuminated in red as the others if I shift to R,N,D,S. I can see them illuminated except the P.
Man thanks for posting this video. I was wondering why it wouldn’t work on my truck but now I have my answer 😅
Man you know what are the most common problems when this happens ?
Like I have to worried for this or not ?
Thank you for your videos men👍🏻
Could be any number of things. I don't think it happens very often. Thanks for watching and commenting.
Thanks bro.
No problem. Thanks for watching and commenting.
The best !
Thanks for the great feedback and for watching.
That's it! Thanks man.
You're welcome. Never thought that would affect the remote start, but it does.
Great video. Had the exact thing with 2014 F-350. Already use the Blue Driver OBD2 tool and love it. Cleared the code and it worked. Thank You!
Thanks for the great comment. Blue Driver is a great little code reader and can't beat the price.
Exact same problem after a HVAC MIL came on. A damper servo code. WTF Ford.
I can understand disabling the remote start If you have a bad misfire or other engine damaging issue but a hvac code? That's crazy. Thanks for watching.
No Engine Light. Remote start still won't work. What I did notice is when I lock my truck it honks 2x indicating a door is open but all the doors are closed including the hood and no door ajar light is on...
Thank you so much for posting this!
No worries! Glad you enjoyed it thanks for watching and commenting.
Great video! New subscriber here. Thanks!
Thanks for watching, commenting, and subscribing. I really appreciate your positive feedback.
thank you so much for this video
You are very welcome. I was surprised when I came across this. Thanks for watching and commenting.
Thank you so helpful 100 💯 glad I found your channel I will subscribe for this information you put out hard going all over the RUclips looking for the specific information. Thank you.
Omg you’re the best
Thanks for watching and the great comment.
What if engine light isn't on?
Hmm, maybe try clearing codes anyway. I'm not sure what codes Ford engineers use as cut off. Might have a not pcm code? Let me know how it works out for you. Thanks for watching
Really great presentation of effective troubleshooting steps
Bless your soul
Thanks for watching and the great comment. I appreciate it.
My F150 had a dead battery. I changed it out. hooked up the red and neutral and now remote start wont start. no check engine light. doors are shut... and hood sensor is making contact.
Same thing is happening to me. Did you ever get it fixed?
Big Help
Glad you found my video helpful. Thanks for watching and commenting.
bought a 2013 Expedition..... remote start worked fine for a while then stopped.... the engine will fire up, and then stop.. took it to a local dealer then they started trying to milk me for as many hours as they could....... after 3 hours they said they still have no idea what was wrong BUT they could go deeper and get MyKey involved if i wanted for a few more hours, which they could not specify .... I told them NO and left, for all that money I could buy a different one installed..... Nobody can help me
Are there any trouble codes when it shuts off? Do you lose all electrical or just motor shuts down.? Let me know how it works out for you. Very interesting problem.
Thanks a million!
Great to hear about my video helping you. Kind of stumbled across this one night. Had to share with everyone.
Good stuff
Thanks for the positive feedback.