How to Replace TPMS Sensors 2016 Ford F-150
HTML-код
- Опубликовано: 10 июл 2024
- This video shows how I replaced old TPMS sensors that stopped working on my 2016 Ford F150.
Links to the tools I used:
Slime valve core removal tool:
amzn.to/3tSmOcY
Bead Buster XB-455:
amzn.to/3RWGHYl
iFixit Mako Screwdriver Kit:
amzn.to/3SitnPz
Motorcraft TPMS19 programmer:
amzn.to/421xz9K
00:00 - Intro
00:24 - Remove tire
00:40 - Remove valve stem core
01:13 - Break tire bead
02:20 - TPMS sensors
03:07 - Remove TPMS sensor
03:32 - Install new TPMS sensor
03:45 - Air up the tire and put it back on
04:23 - Second tire, same as first
05:33 - Skimming over the other two tires
06:22 - Programming that didn't work
07:01 - Programming that DID work
07:55 - Finishing up 
Авто/Мото
Training the tyres was like putting in chest codes into computer games from the 90s.
Great tutorial!
lol I think Ford hired the cheat code guy 😂
The easiest way to rebead a tire is a ratchet strap around the tread
so detailed, great video, helped with my explorer!
Great video. What a pain to program the new sensors.
Thanks! Yeah it was an ordeal.
@@thefiXfiles Can you replace the tpms with a regular valve stem? I have newer wheels on an older car.
Nicely done.
Super helpful. Thank you.
Nice video. I have one tire sensor on my 2015 F-150 that has failed. Probably a dead battery. So it’s time to replace them all.
Good luck! I don’t do much car stuff so it was harder work than I’m used to. Still worth it to save the money though.
Awesome video! Thank you
Great vid definitely learned a thing or two
Awesome 👌 👍 very helpful 🤜💥🤛
Nice video good job!
Thanks! Hope it helps if you’re doing the same job
Good job! And you’ve answered my question which I’ve been having trouble with which was “can I just replace the electronics without changing the valve stem ? “
Next time you’re trying to seal a bead, take a piece of rope or something, and go around the center of the treads of the tire, then twist it with something like a tourniquet. This will push the center of the tire in and make the bead come in contact with the rim better.
Now I have a new question… Did you buy your clone with all the money you saved by not going to the dealership? Great job American man. 🇺🇸
i like your tourniquet idea - i realize it's prob not your idea, but thanks either way
Can you replace the tpms with a regular valve stem?
No, I don’t think so. These valve stems have threads on the inside also to accept that screw holding the electronics. Regular valve stems don’t.
Im going to try this method since I tried the other methods and even bought the ford TPMS sensor and it didnt work as I was told to do it in your 2nd attempt. Hope the 3rd method works.
Did it work?
I tried checking to see if I could wake up the current sensors since they are only about 30k miles old. 1 worked, others wouldnt respond. So now I need to replace them anyway then Ill try this method after I replace them.
why are replaced all of them?
You could have done it on the the truck. It is usually faster to fill with the valve core removed..