Could get some info on the build specs assuming 5:13-5:38 rears gearing ? Type of lockers used in the 8lug? Dana 60s-70? Type of spring/ shock King coilovers? Size of turbos?pics of underhood/undercarriage?? Pics of building custom frame stretch and the rear cab stretch and axle suspension stretch relocation ? Fitting the Cummins 6bt and what kind of trans jeep 6spd ?bell housing stock or novac adapters ? Custom driveshafts or? exhaust? 4"-5"? Brand of Mufflers? Night pics of lighting ✨️ and rock lights lite up,.. interior lighting, stereo used ...we want to know what gets used when there is no limits on a project 🤔 love the sound of the deisel and seems to function well...how long before they become affordable/available ...to the average person
Hello President, can you tell me or show a video how the axle and the wheel joints like no other, it helps ground clearance for the mid section of the body! Please tell
Three things... 1. It’s not really a “Jeep” anymore at that point 2. Love seeing the tire lift off the ground on Hell’s Gate 3. Love the Cummins and even better to see a POWERSTROKE pulling both rigs there at the end!!!
i would love to know just out of curiosity how much it would cost someone to build one from scratch.. anyone got any ideas? not because i want to by any means just wonder what it would take. i bet its atleast a 100k plus i would imagine.
Hey I have a 91 ramcharger, Just got it. I have a cummins turbo dropping in it. Got all the new wiring harnesses, new transfers and transmission. 44 hawgs on 16 in bart wheels. Trying to get exhaust run out hood. Can yall help?
Murph_Derf Not everyone can handle 8 cylinders.. :) Lol, in all seriousness usually the the powerstroke is far too large to fit in most these projects, especially for rattletrap, most of internationals (PS) designs are made for a fullsize truck and to take up as much room as necissary.
Thats what im wondering too,a yota?hahaha..well that thing is not a jeep anymore with all those modifications,maybe the steering wheel is from a toyotw,lol..
This thing is a good example of when a jeep is no longer a jeep after too much modification they should start calling them poop because thats what they have a big pile of it
+bmxforlife TJ Bed is probably too short, but I'm sure it would have plenty of power to do so. The 6bt in it is pushing 500 horse and it's sitting on Dana 60s.
What kind of hubs are those? I love how the axels are closer to the top of the wheel to add ground clearance. This jeep is a bad bitch! Probably gets pretty decent fuel mileage too.
Always has been my favorite Diesel engine.
I'm proud to say I live in the same district as there factory and have seen so many of there amazing builds
Great job Martin, that thing is SICK!!!!
never saw a 4x4 managing so well in the Tub
congrats
going Slow , having Low Rev Torque and a Smooth Torque Line can make "Wonders"
i would love to build something just like this. This jeep is unreal!
Sickest jeep ever built
It's like it was made for the Moab dementions are perfect especially weight transfer beautiful.
Wicked!!! Great job MBRP!!!!!
Could get some info on the build specs assuming 5:13-5:38 rears gearing ? Type of lockers used in the 8lug? Dana 60s-70? Type of spring/ shock King coilovers? Size of turbos?pics of underhood/undercarriage?? Pics of building custom frame stretch and the rear cab stretch and axle suspension stretch relocation ? Fitting the Cummins 6bt and what kind of trans jeep 6spd ?bell housing stock or novac adapters ? Custom driveshafts or? exhaust? 4"-5"? Brand of Mufflers? Night pics of lighting ✨️ and rock lights lite up,.. interior lighting, stereo used ...we want to know what gets used when there is no limits on a project 🤔 love the sound of the deisel and seems to function well...how long before they become affordable/available ...to the average person
It’s a TWIN TURBO 12V 5.9 Cummins.
Hello President, can you tell me or show a video how the axle and the wheel joints like no other, it helps ground clearance for the mid section of the body! Please tell
That is one bad ass rig.
yup, they run on a motor from an electric shaving machine and a 9volt battery
Three things...
1. It’s not really a “Jeep” anymore at that point
2. Love seeing the tire lift off the ground on Hell’s Gate
3. Love the Cummins and even better to see a POWERSTROKE pulling both rigs there at the end!!!
If I win the lottery I'm contacting these guys first.
That jeep is so badass!
The massivle long wheel bas ,which has to be longer than 120 , and the suspensin/lockers ...are what are doing the job not the motor .
Definitely the coolest jeep in the entire world!!!!
They actually made a V6 and a V8 to use in the Dodge 1500s.
that is exactly the route i want to go!!
Is this a one-off or a orderable/customizable vehicle?
Full custom
Love the video and love the products!
i would love to know just out of curiosity how much it would cost someone to build one from scratch.. anyone got any ideas? not because i want to by any means just wonder what it would take. i bet its atleast a 100k plus i would imagine.
ual... esse é um verdadeiro sonho esse Jeep
... show
wish they built jeeps with that frame. i would buy one in a heartbeat
Toyota steering wheel at 0:51
Ikr
+Nolan C. good spot! haha
+Nolan C. lol xD
+Nolan C. to bad they were not in the jeep at the time no toyota wheel at 3:14
Hey I have a 91 ramcharger, Just got it. I have a cummins turbo dropping in it. Got all the new wiring harnesses, new transfers and transmission. 44 hawgs on 16 in bart wheels. Trying to get exhaust run out hood. Can yall help?
Cummins actually did make a v8 they used them in heavy equipment. They dont produce them anymore
that would be fun.....how much do you think is total cost?
This thing is sick...is there any place it can't go??
May as well of just built a tank... You took the obstacle out of the obstacle.
Pretty sweet nice build
that driveshaft is in way kinda, couldn't that be joint further to rear axle?
+tallll70 The swing arms hang lower than the driveshafts.
The swing arms are able to be slid on if need be.
I WANT THIS JEEP!!!
Cummins... because you don't hear people say so I swapped a power choke into my... hehe
Well technically Cummins is owned by Ford so....
mrfrmguy Maybe get your facts straight. Here you go www.dieselhub.com/news/ford-owns-cummins.html
Murph_Derf Not everyone can handle 8 cylinders.. :) Lol, in all seriousness usually the the powerstroke is far too large to fit in most these projects, especially for rattletrap, most of internationals (PS) designs are made for a fullsize truck and to take up as much room as necissary.
This beast is V8 !!! and more then 5000 CC
wow, that is a nice rig.
yeah, buddy!
do you guys not let your tires down? It's doesn't look like they were?
Didn't look like he needed to...
how much work was it to put the diesel motor in it
I was wondering if you guys did off-road four wheelers
Yes it is a toyota because the genius who edited the video shows when one of the builders is driving an FJ, not the jeep.
What wheels are you guys running? Love this build! Was bummed I never got to see it this year over EJS
what did that jeep cost to build ?
0:51 whats with the toyota steering wheel?
at 0:51, pretty sure that's a toyota steering wheel
***** in the credits it show the tow rig as a F250
Definitely an FJ Cruiser based on the handle, gauges, and vent. Good eye!!
Thats what im wondering too,a yota?hahaha..well that thing is not a jeep anymore with all those modifications,maybe the steering wheel is from a toyotw,lol..
why the toyota steering wheel at 0:51??
This thing is a good example of when a jeep is no longer a jeep after too much modification they should start calling them poop because thats what they have a big pile of it
what is the power and torque?
How much is the total cost of the build?very bad ass truck..can go anywhere.
Sold to someone in the Domincan Republic for $175k. I believe it's mentioned in another RattleTrap overview video on here.
Very nice jeep! What kind of schooling would you have to go through to make this project?
hey could u get the name and or inch of that lift?
You think if they took all of the stuff out of the back and put a fifth wheel hitch they could tow a fifth wheel?
+bmxforlife TJ Bed is probably too short, but I'm sure it would have plenty of power to do so. The 6bt in it is pushing 500 horse and it's sitting on Dana 60s.
whats the deal with the Toyota steering wheel at 00:50?
Why a smoke stack?
Cool RC car. Where you get the figures around and the land model ? :-P
What years?
Did you guys made that jeeps hard top?
they have a Diesel version in Europe. even the Wrangler
Is this a 6bt? I cant tell cause of the music
they do..
Mountain Rated 90' approach, 45' break over, 85' departure, .......FKN Sick...........roll over 15'
That turbo whine tho
They are portal axles. Have a google. Super interesting
damn whats up with all that black smoke
nice, i want one
They were totally in an FJ Cruiser at 0:51 !!! LOVE FJ's
how to get one of that......
Is this the 5.9L?
That thing does awesome, I guess it better for the money and time it cost.
They aren't in america though
at 3:00 is it in 2wd or what??
is that a 5.9?
what size lift does it have
4inch
3:00 now that's just showing off!
Why leave tire burnout marks? Do that on a track, leave nature as you found it. I guess Tread Lightly is a foreign concept to you guys.
Do you actually wheel your battery operated smart car or do you just park hard at the mall ?
There are tire marks all throughout Moab.
S. dem y don't u just go out and hug a f ing tree! Or maybe u should just go hug hillary
"Fuck nature.... Murica". Wow you are a class act. Might as well go shoot those eagles out of the sky and pour oil on their nests with your mentality.
relax no rocks were hurt in the making of this commercial
Very cool canadian made jeep
bad ass, i'd shit my pants if i seen it in person, please do a vlog while driving it through the city. grab sum gopro's
Ultimate off road machine! 😁
The weight of that engine is the reason why its got so much grip! Go diesel power!
best jeep ever
How Much? I got 2 dollars here... and a 94 jeep wrangler
emagine a Prius owner next to this beast
Cesar Gonzalez. imagine if you could spell
What kind of hubs are those? I love how the axels are closer to the top of the wheel to add ground clearance. This jeep is a bad bitch! Probably gets pretty decent fuel mileage too.
44s AND portals? jesus, how much ground clearance do you need? haha
is it easy to swap engine
Go Uncle E!
this must be illegal because is very very contaminant
finally the jk has a real engine
You know Cummins doesnt make a V8 right?
Where can i get this sweet hardtop!
At sweet sixteen store.
on second 51 are you driving a prius or did you put a prius steering wheel on your JK? haha
+Brian Casey It's an FJ
A VGT set up probably would have worked out better for this type of off roading.
wow you just made every other jeep look dumb. things amazing
mai lyfe needs moar rattle trap
actually cummins has made a V8 the 903
Anyone see he was driving an FJ at 0:50 haha!
+Mill Hollow Ya its sick!
Climbed out in just idle :O
It's called exhaust fumes rookie
So much torque…..what ever happened to this Jeep?