Incision S8E 80mm/90mm Shocks Step-by-Step Instructions - Vanquish Products
HTML-код
- Опубликовано: 23 ноя 2021
- The Incision S8E shocks are included on Vanquish Products Phoenix Portal as well as sold in pairs. This video outlines how to assemble these shocks as well as how to rebuild them.
Snap Ring Pliers: amzn.to/3FNds2m
Buy on Vanquish Products: bit.ly/3G72tCe
Buy on Amain: bit.ly/3b0cFhb
Follow My Social Media!
HarleyDesignsInc
Facebook.com/HarleyDesignsInc
Harley's Thingiverse: bit.ly/2YKOhes
My Camera/Production Gear:
Sony A6400 Camera: amzn.to/2K0ixt1
Sigma 16mm F1.4 Lens: amzn.to/2Y9TQj2
Audio-Technica AT875R Microphone: amzn.to/2YcVqR7
GoPro Vlogging Rig: • GoPro Hero 7 Vlogging ...
Zhiyun Crane V2: amzn.to/2Eo3Zjc
MacBook Pro 15in 512gb: amzn.to/2DGgBRQ
Samsung T5 500gb Hard Drive: amzn.to/2CxRcN4
DJI Mavic Drone: amzn.to/2EGw2un 
Авто/Мото
Great video Josh, love the fact that first e-clip flew like 90% of the times and became part of that other dimension.
Yep, I saw that E-Clip go flying! Nice one...
Beat me to it!
That was simply a video edit so I could get it seated properly :) Dang things are slippery!
I use a similar technique when assembling my shocks. As well, I use a small dowel, cut to size, that I insert in the shock and then install the cap - this keeps the shaft from moving up and down during assembly and only takes a few extra seconds. 👍
I always try to do c-clips and things like that inside a pillowcase cover, saves hours looking for them on the floor, .... granted wouldn't be ideal for filming
I like snap rings too but they definitely aren't as user friendly to the general consumers since they require special tools. Thats why these shocks come with the lower cartridge pre-assembled.
I had a heck of a time getting collar to thread on properly. It would go straight then want to skip.
I got so frustrated with that, I just went to LHS and picked up a different set of shocks.
@@jaylite2826 Thank you I thinking I was only one
No SNU! 😢 All good! But definitely look forward to those on Tuesdays 🤣
Josh, could you please point me towards any aluminum, adjustable spring collar, that will fit the stock SC8E shocks on the VS4-10 portal shocks?
Another informative video. Thx. Any news when the straight axled Phoenix is going to drop?
No straight axle Phoenix is announced. The Phoenix Portal is brand new, so there will not be another release any time soon.
Is it just me or is Josh using dental picks? Lol creative
You can get a pack of 6-8 different styles on Amazon for just a few bucks. They are larger than dental tools, and can be very handy for RC.
Is 30 weight a good weight for these shocks/ rig? I just got this kit and haven't built the shocks yet. Love the channel, man!
30 is great if you like to drive slow and technical. If you drive with more speed, I like to go up to 60-80.
Any word on a restock of the Phoenix?
Ideally, all manufacturers should be using small screws to hold the piston on the shaft, then no need for e-clips! And, c-clips, just use a threaded cap and no need for them, either! 👍
Threaded lower cartridges take up more space is all, so this style is used for maximum shock stroke and consistent compression on the lower seals. Lots of different schools of thought in shock design for sure.
Oops! I put the shock pistons in up-side-down. But, they were still working very well. Will need to fix that. Did I do that on my Pro build too? Dang!
It’s not critical at all, just moves the support as far up as possible. Not worth pulling the shaft thru the seals to fix.
Where are the rubber o-rings in the kit? I didn’t see that part in the instructions either. Mine leak like crazy and now I know why . Thought this kit was perfect but see they’re are things missing. You’d think if you spend that much $$ everything would be included
Are these shocks available for purchase on the vanquish site? I did some searching and looks like only the older version is available on the site. its hard to find shocks with a bleed hole in cap.
Complete sets aren’t available yet but will be.
Man.... No ShockGate incident... Been so long since you tasted some shock fluid.
You uhh... You find that e clip??
Mine leak so bad right out of the box, tried rebuilding and they still are wet after every run. Not sure what the issue is since people rave about these shocks but I had to take them off my Phoenix because of how bad they leaked.
They all leak and have since the beginning yet they still keep selling them with no acknowledgement.
What shock oil is included in the kit?
30wt.
Which knipex do you like?
I added a link in the description.
@@HarleyDesignsInc thank you, always nice to have another quality tool
I purchased snap ring pliers through link did not work I had to buy this one works alot better .
KNIPEX 44 11 J0 Internal Snap Ring Pliers-Forged Tips
Hey Harely, how about helping a long time fan out ???? I'm disabled and can't afford to buy a new crawler,do you think you could help out ??? And no this is NOT a joke.
I purchased the snap ring pliers through the link after trying to remove the snap ring they did not work The tips were too big and square the pins that going to the snap rings were too short for me to get in the shock body there is a much better set you can order This is the part number I'd recommend getting this instead of the one that you have posted ..
KNIPEX 44 11 J0 Internal Snap Ring Pliers-Forged Tips
That's super odd, thats the exact same part number that the link takes me to and that I use. Are you sure they didn't send you the incorrect version?
@@HarleyDesignsInc The one you have linked is the
KNIPEX - 48 11 J0 Tools -
The better set is
Kinpex 44 11 J0 Forged tips they're a lot more round just a couple numbers off 44 to 48 but they work really good buddy A lot more round at the tips and a lot longer pins they fit really well in the shock body