Yamaha MT-09 2024 Prototype Accessories! - Belly Pan, Seat Cowl & Infill Panels!

Поделиться
HTML-код
  • Опубликовано: 25 ноя 2024

Комментарии • 67

  • @corujariousa
    @corujariousa Месяц назад

    iDEAS FOR YOU: 1) For the seat cowl: Create one that is an actual storage space with the key security; 2) For the Windscreen: Make a bigger/taller version with the same design. Having a transparent version in Lexan/Polycarbonate/etc would be great. Note: I hope the bellypan will be more elongated and cover more of the exhaust.

  • @austinbraden6529
    @austinbraden6529 3 месяца назад +3

    Make sure to add a compression limiter for that front panel since you will be bolting it into the engine joint. If not, you’ll crack the plastic if torquing to full spec, especially with ABS. Or you’ll induce creep and the joint will eventually fail and be a safety hazard.

  • @tommoso55
    @tommoso55 2 месяца назад

    Brilliant, well done chaps

  • @damacknificent151
    @damacknificent151 3 месяца назад +3

    Maybe extend the bellypan closed to the front tire, to give a bit more room for aftermarket full exhaust. More of a wedge shaped

  • @fgmgm5685
    @fgmgm5685 Месяц назад

    Love the seat cowl ❤

  • @michaelbroughton2207
    @michaelbroughton2207 3 месяца назад +1

    I like those infill panels and I’m excited to see the belly pan

  • @gingerpunk2
    @gingerpunk2 3 месяца назад

    You folks rock! love the work you do, and you're simply awesome to deal with too.

  • @xtina818
    @xtina818 2 месяца назад

    Fly screen is really nice and looking forward to the belly pan

  • @raffaelloariu324
    @raffaelloariu324 3 месяца назад +9

    To be honest, the seat cowl is REALY ugly, you guys should invent one that is complete and can fit right in without the original backseat.

    • @xtina818
      @xtina818 2 месяца назад +1

      It would probably cost too much

    • @raffaelloariu324
      @raffaelloariu324 2 месяца назад

      ​@@xtina818 jup it would be a higher price, but there are always people ready to throw that amount of money 😂

  • @soulrebelno1
    @soulrebelno1 3 месяца назад

    Make the hand guards with replaceable bar end protection pieces, so if ends get scratched, or bashed up because the bike was dropped, then they can be simply swapped out.

  • @zzzap4778
    @zzzap4778 3 месяца назад +3

    great work guys, seems like you have a really fun job honestly

  • @shubsodhi5986
    @shubsodhi5986 3 месяца назад

    For the belly pan, please make sure it looks good with the sc project s1 exhaust because that is pretty much the best exhaust available for this bike.

    • @raffaelloariu324
      @raffaelloariu324 3 месяца назад

      HAHAHAHAHA SC THE BEST HAHAHAHAHAHA 😂😂😂😂 you got some sense of humor 😝

  • @rodrigo122727
    @rodrigo122727 2 месяца назад

    The fly screen looks good. Will it be full black, or will you a dark smoke or smoked option?

    • @pyramidmoto86
      @pyramidmoto86  2 месяца назад +1

      The Fly Screen will be available in Matte Black (available now!) and coming later will be painted options. We won't have any transparent versions unfortunately.

  • @carlosberrios241
    @carlosberrios241 3 месяца назад +1

    Do you have any windscreen installation videos for the 2024 mt09 available? Nowhere has anything.

  • @serfraiz
    @serfraiz 2 месяца назад

    Do you know on what date the seat cover will be on sale? I can't wait to buy it

  • @raffaelloariu324
    @raffaelloariu324 3 месяца назад

    Mak some brackets to put the frontlight 2 cm down, it will look more aggresive and be in line with the rest of the bike

  • @Bugside
    @Bugside 3 месяца назад +9

    What about a version of the front side infill with winglets?

    • @23shipoopi23
      @23shipoopi23 3 месяца назад +3

      Thank you finally someone says it

    • @pyramidmoto86
      @pyramidmoto86  3 месяца назад +1

      Like the idea for sure - we will check it out.

    • @yoog
      @yoog 3 месяца назад +2

      Why it's literally the most pointless thing to be added to a bike ever.

    • @Bugside
      @Bugside 3 месяца назад +1

      @@yoog for looks, you either like it or not. We all know it makes no difference in these bikes

  • @VSRDWN
    @VSRDWN 3 месяца назад +2

    Do you guys ship to the U.S?

  • @DannyFisher-bo8qk
    @DannyFisher-bo8qk 11 дней назад

    do you think the infill panels would fit an XSR900 2022+?

  • @otlndsh
    @otlndsh 3 месяца назад +2

    obviously no cover for the SP since of the Ohlins suspension?

  • @michaellb1880
    @michaellb1880 3 месяца назад

    Im coming for that seat cover, im thinking of that since byke came out…..

  • @LOM_U
    @LOM_U 3 месяца назад +1

    can i have it ? haha keep going bro

  • @blackfish-xn8zo
    @blackfish-xn8zo 2 месяца назад

    Will the final product be injection molded or 3D printed ABS?

  • @TheJabbo27
    @TheJabbo27 2 месяца назад

    Do you happen to know the torque settings for the two bolts under the seat that are used to install the infill panels?

  • @mm9991_
    @mm9991_ 3 месяца назад

    try to do a seat cover like the rs660 that possible cover would look sick

  • @AndyBowser-y8k
    @AndyBowser-y8k 3 месяца назад

    Let's go!!

  • @boywonderrr71
    @boywonderrr71 3 месяца назад

    I would buy R9 set of full fairings for my 24 MT09SP! Do you plan on making copycat for us?
    I love full or half fairing bikes just cant do the racing seat position anymore. Had 2 600 Bandits and their fairing helped so much with the wind. All the fly screens for MT09SP are just for looks with minimal functionality.

  • @kforeal6809
    @kforeal6809 Месяц назад

    Any plans for some sort of infill panel for the sides of the 22+ XSR?

    • @pyramidmoto86
      @pyramidmoto86  Месяц назад

      Possibly! Our Infill Panels for the MT-09 should also fit the XSR900. Same with the Belly Pan too. The question is if it'll suit the style of the XSR as it's a bit different to the MT-09!

    • @kforeal6809
      @kforeal6809 Месяц назад

      @@pyramidmoto86 yeah the style as well as the paint schemes differ from the MT. Also a lot of people run the EVO frame sliders, which would be blocked by the panels, unfortunately 😕.

  • @mikefocusRS
    @mikefocusRS 3 месяца назад +1

    Hoping for carbon fibre body panels.

    • @pyramidmoto86
      @pyramidmoto86  3 месяца назад

      We will definitely be considering that Mike!

  • @cinaciccio1
    @cinaciccio1 3 месяца назад

    When the fly screen will be available on your website? I am interested to buy it. Thanks

    • @pyramidmoto86
      @pyramidmoto86  3 месяца назад

      It won't be long Francesco! We are hoping to have matte black fly screens on the website in no more than 4 weeks. Colour matched options will be a few more weeks after that.

  • @peterpan7176
    @peterpan7176 3 месяца назад +1

    I like sp version

  • @Pseudo_Placebo
    @Pseudo_Placebo 2 месяца назад

    Wenn ich ein verkleidetes Motorrad haben will kaufe ich mir eine Supersportler
    ein Naked Bike kaufe ich mir doch bewusst oder hat man dann am falschen Ende gespart

  • @alexiulian1834
    @alexiulian1834 3 месяца назад +2

    I don't know if anyone interested as I am but it would be really nice some passenger hand bar or something to hold to....I personale really need one cause these model does not have anyrhing for the passenger to hold to

    • @contacthigh8571
      @contacthigh8571 3 месяца назад

      What do you think the strap on the back seat is for?

    • @kforeal6809
      @kforeal6809 Месяц назад

      @@alexiulian1834 check out T-rex racing. I know they have options for the xsr, so they might have something for the MT🤷‍♂️

  • @jimmylau6388
    @jimmylau6388 3 месяца назад

    What about the spray guard for the Gen 4 MT 09?

  • @512460
    @512460 8 часов назад

    Soo the cowl is a seat cover?
    However what I don't understand is why do people want all these infill panels and belly pans at this point just buy the r9

  • @Cengiz-kr6gz
    @Cengiz-kr6gz Месяц назад

    Does the bellypan fits on a 2022 XSR 900?

    • @pyramidmoto86
      @pyramidmoto86  Месяц назад

      It does! Check out one of our newer videos, we include some images of the belly pan fitted to the XSR900.

  • @texastruth9752
    @texastruth9752 Месяц назад

    Have 2022 Suited up with all the add on parts and painted Wolf gray......Nobody knows what it is.

  • @diegomarteen
    @diegomarteen 17 дней назад

    is mt09 2021-2023 belly pan compatible with 2024 model?

    • @pyramidmoto86
      @pyramidmoto86  13 дней назад

      Hi Diego, yes it will. The engine is unchanged from 21-23 so any belly pans for that bike should fit the 24 model just fine.

  • @ivanlesina5642
    @ivanlesina5642 3 месяца назад

    Please make belly pan as symetrical as posible.

  • @raptorgamer8878
    @raptorgamer8878 3 месяца назад

    Don't forget to patent your products when you're done making them

  • @3rdRockRider
    @3rdRockRider 3 месяца назад +1

    Nope

  • @alesnetopilik2837
    @alesnetopilik2837 3 месяца назад

    Don't buy naked bikes if you think they are hideous.

    • @arnaudkoopstra
      @arnaudkoopstra 3 месяца назад

      Why should you buy a naked bike when you think they are hideous?

    • @pyramidmoto86
      @pyramidmoto86  3 месяца назад

      👮‍♂

  • @arnaudkoopstra
    @arnaudkoopstra 3 месяца назад +2

    All the stuff looks very cheap and no upgrade at all voor my mt09, sorry fooks

    • @TheSd1cko
      @TheSd1cko 3 месяца назад

      It all looks like cheap crap doesn't it. Like Ali Express junk

    • @pyramidmoto86
      @pyramidmoto86  3 месяца назад

      🤕

  • @Babaindahaus
    @Babaindahaus 3 месяца назад

    Im sorry but in my opi ion the new mt looks so ugly. I dont know why but rn43 and 29 are the nicest. my opi ion :-)