Freedom Performance Exhaust 2018 Fatboy
HTML-код
- Опубликовано: 3 окт 2019
- #FreedomPerformanceExhaust #TraskPerformance #HarleyDavidson
Changed out my Bassani Road Rage for the new Freedom Performance 2 into 1 side dump exhaust. I love how much deeper it sounds! HD00808 Part Number. This Bike does have an S&S 475 cam.
After Dyno this made 113hp 121trq on a 107ci motor 
Авто/Мото
Looks phenomenal and sounds even better - Great video!!!
Sha-Weeeet! That look forward from the rear is the 💣. You are spot on, the aggressive side-dump matched with that megaphone, Dude. 2020 Fat Boy 114.
Now that's what a Harley supposed to sound like especially in an idle
Perfect!! Those pipes have it all!! Beautiful sound great! Good ground clearance! Luv them!! BAD ASS⚡⚡
I love your simple setup, great job...
THIS video sold me. I'm ordering mine today. Thank you!!!
Sounds great! Amazing looking bike.
Love that sound .Hey freedom this guy just sold a set for you . Ordering mine now!
Awesome sound! Congrats!
Mate, thanks for sharing that. That looks and sounds great. I have the TBR and would swap it for that in a heart beat. Cheers. :)
Wow, that sounds AWESOME!!
That’s bad ass bike, exactly what I’m looking for, thanx for the video!
Your welcome bro and thanks!
Yeah buddy that sounds great and looks perrrfect
nice and deep ... looks great too.
Sounds great and looks Awesome
Nice looking bike!
Absolutely beautiful thank you for the share ❤️💜❤️
I have the Anniversary edition. Plan on doing the same. Thanks for the video.
Saw your post. Are you satisfied with the Freedom exhaust?
Nice! Unique Harley.
Beautiful bike
Great looking pipe sound great
Awesome bro!
grazie!!! lo monterò alla mia 114 al posto degli shortshots. Bellissimo ferro! Saluti dall'Italia.
Sounds and looks great. I think I just found my new exhaust for my Breakout 114.
Beautiful.
I love the looks of it also...
Nice sounds pure
That pipe looks killer and it's different. Quick detach bags should work well with it too as they run short and aim out the side.
Ya man definitely like this combo pipe and air better...
Sounds good
cool sound
Thanks Bro I like it a lot now
Sounds awesome bud! Anything done to motor? And is it 107 or 114?
Great favorite H-D! Please tell me what filter do you have on it? Looks amazing
Bike looks and sounds amazing. Did you have to convert the floorboards to foot pegs to get the exhaust to fit? Everything I read states these will not fit my ‘19 Fatboy. Any insight would be great. Thanks.
Bro if I am correct I have seen a video with the kerker bootlegger and freedom pipe?
Do you like the freedom better?
Do you still have bootlegger?
What size motor does this bike have?
Could you possibly do a ride by video so we can hear the range of the exhaust sound?
Hey that's a great sounding pipe. Did you have to use a tuner on it? Thanks
Love the sound, especially it comes in black.... Your opinion if you had a shoei helmet and a sena connected could you hear your music, a phone call or directions from maps?
Thank you
That bike sounds pissed off. Nasty
Sounds awesome, like you added a cam?
I'm wondering is it over excessively loud or at least enjoyable right down the road
And did they give you the option on different size O2 sensors
Just got the same part number for my softail. Did you have any issues with the flange, seems to be a different taper than the stock headpipe
Love those pipes!" Killer choice sounds great 👊💨
Thanks I love it
Did you get an install manual with yours? I have the exact same bike and am getting ready for install but cant find an online manual.
Perfect
What kind of intake is that? Love that clear look
Any advice on installing the rear passenger peg kit... no directions from Freedom?
Is that an aftermarket brake light on the rear fender? Mine is just a reflector (2021). I'd love to have an additional brake light for safety if you can point me in the right direction. thanks.
How’s it going nice sounds .. curious do u get decel pop ?
What style seat for rear? Looks alot thicker then stock?
can you still mount the original passenger pegs? thanks. love the exhaust sound
On the SportGlide out looks like it. Not sure about this bike.
What tuner did you use, can I use the hd pro street tuner on this?
Did you do a complete cam kit? Pn#’s or parts list?
Do the passenger pegs still fit now that you've went to the freedom pipe
I have a full Bassani 2-1, if i change how would i be able to get that tail end piece ?
Bro bike looks and sounds amazing. First time seeing that style of exhaust. What crash. Are are those and what brand you install for rear leds? Mahalo in advance bro. Great video. 🤙🏾🔥
Apologies. Meant to say crash bars.
Yeah watched the video several times and been looking for a seat. Can you please let me know which seat exactly that it is.
I love your exhaust. I just ordered mine from freedom. Have you had any problems with the chrome peeling? Thanks
Saw your post. Are you satisfied with the Freedom exhaust?
Hey man, love the sound! I’m curious... is it loud at cruising speeds or does it mellow out?
Its mellow cruising but will brap with you twist the handle.
What airfilter is that looks nice
Which seat are you rocking?
What passengers seat is that?
Does the exhaust scrape the ground on turns?
Hey there I have a 2022 fatboy I’m wanting a new seat what seat do you have and how is it on a ride my tailbone starts to hurt about 45 minutes into a ride thanks
What are those rider footpegs?
Hey Rican!
Thanks for the video. I am getting the union or this turnout on my sportglide. I suppose you have the ThorCatalyst in the pipe? I thought it would sound more dampened but yours sounds quite significant. Since I installed my stage 2 cam using V&H proPipe the sound became too much. 😅.
Hoping that freedom performance will bring it down, if there is a quiet baffle and a catalyst, that should dampen a lot.
I don't believe there is a cat at all in this pipe. Its loud but it is a tasteful throaty loud not raspy like my Bassani was.
@@RicanBagger219 Oh, I thought catalyst were standard.. Maybe only for Europe versions then.
I'm sold
I’ve been looking at the TAB Performance bam stick with a zombie baffle but this Freedom Performance 2 in 1 looks and sounds even better! Very deep tones and looks fitting for a fat boy steam roller. Does it have a baffle and where can I find one?
Dino Smoke I had the Tab Zombie in the beginning and they are perfect if you want to keep the stock look. This exhaust system I absolutely love. Nice and deep and doesn’t look too bad at all. Look at the description of my video I listed the part number.
Did you have to take rear pegs off to fit
Can you put the rear passenger peg back on?
anybody that knows about engines thoroughly I have question!! when he starts the bike and the engine just pop pop pop then it eventually plap plap plap's are those initial pops just that the bike only fires one cylinder? or is it a lean firing cylinder causing it to just pop.
Cool evn!!
shop.traskperformance.com/collections/fuel-air/products/trask-assault-charge-high-flow-air-cleaner-kit-for-throttle-by-wire
Thanks for the link I think I will be getting one soon!
How's the cornering clearance?
Might be a great exhaust if your warranty is up or you don’t care about your warranty. I bought this exhaust only to be told by my dealer that my warranty will be voided and it could cause engine damage. I don’t know if it’s true but I wanted my warranty so I have to now return it
Does this still have the baffles?
Grandma pipes!
This sounds awesome. I have a 2018 Slim. Could you share some info on the forward controls? Thank you!!
They are from a 2018 Sport Glide they bolt right up.
I didn’t see that tip end on their site
Sounds and looks awesome, are the baffles in or out? if they are out, are they easily removable?
That is straight our of the box onto the bike so Baffles are in and I haven't looked to see if they are removable because it sounds perfect and loud.
Que Pasa Bori. How's that Freedom Turnout holding up ? it's been 2 years since this video. Just purchased one for my Harely.
What did you do for passenger pegs?
Is thst a stage 2 ???
Can anyone please shoot the link or the name of model on that exhaust highly appreciated
Hello bro, Can you give me the link to order? Tks
moto super like bro
I love the sound of this exhaust but my only concern is - Will this exhaust VOID factory warranty ?
No.
Looks like the exhaust blocks the rear passenger pegs
looks like its gonna scrape A LOT, sounds pretty bass tho
Are you still happy with the freedom exhaust? Did you lose torque?
No gained both HP and Torque
Yep sounds great, you going to dyno it? be good to see how it compares
40indyuk Yup! Retune and Dyno Happening Oct 11th
40indyuk 117hp 124trq
Any dead spots in performance? Iv heard freedom pipes are hard to tune?
No issues on this one like I had on my other Exhaust setups. No Dips very smooth
🔥🔥🔥🔥🔥 Can you still install passenger foot pegs?
Yes
What air cleaner is that? Really Nice!!!
Roberto Fuentes Trask Performance Intake
Can you tell me where you purchased that air cleaner please. Its so school I want one
Trask 500$
West end motorsports sells them and they also have the payment method of Affrim.
I have used Affrim twice already and thought it was very up front and the fees where resonable.
OBTW, isn’t it nice to have a tier to show off with the pipes? Mean 😤
Hey mate, does the rear footpegs still fit with this pipe?
Yes they do I just hadn’t installed them yet when I made this video.
@@RicanBagger219 thanks!
Can you tell me how you got foot pegs for that model year?
Those are from the 2018 Sport Glide front peg, brake, and shifter setup. Very expensive if you buy the parts but I found a guy that had a sport glide that wanted floor boards so we traded setups. Very lucky because it was almost $700 when i priced the parts.
Using a tuner? If so which one
Power vision tune
Great Sound, whats the price on these ???, Looking at these for my FXDR
Around 1k is what I paid
Rican219_Biker
Cool, I have an FXDR that this pipe would look nice 👍, Thanks Papa
@@elithegreat6463 No Problem bro good luck
Do these require you to remove passenger pegs?
Yes but they make a relocation adaptor if you want to reinstall them which I did a couple of days later.