I came back to your tutorial so many times to refresh myself how to thread the serger again and again! The times I didn’t I definitely paid for it. Thanks again!
Thanks for showing threading up closer. My problem was that blue thread. I been putting the blue thread under the green thread and then after watching you now I put the blue thread thru that needle thingy and over the green thread. That's the part I couldn't see on all the other videos. Hugs and appreciation
I agree. Thank you for zooming in that has helped a great deal!!! I loved your tutorial. I just got my serger 2 days ago and was scared to do anything.
Thank you! Thank you! I just got this serger. I watched 3 other tutorials before watching this one and yours is FANTASTIC. You are the only one who specifically mentioned pulling thread from the back when starting to thread the serger. It looked that way but no one else mentioned it. Your attention to detail is phenomenal and I can’t thank you enough. I bought the serger because I like making holiday pillowcases for children. I am particular about my sewing. I ave a zig zag stitch on my sewing machine but is ok on the seams after to help with raveling. I do French seams on my pillowcases which of course, are time-consuming. The I got the idea of using a serger for my seams. It will be able to make the pillowcases faster! And I owe it all to you!👍
Every time I need to thread my serger I watch this video! He’s the best and his camera focuses on the machine at close up views! While other tutorials are not zoomed in they are more focused on the camera being on them instead of machine which is so hard to see. This video is the BEST!
The BEST instructions for this serger. You included a little step with the lower looper thread that I hadn’t seen before, and it’s really helped. Thanks!
You are like the Bob Ross of sewing.....Thank you so much for putting out these beginner-level tutorials! Your low-key, easy-going way of teaching with the added benefit of your calm, soothing voice takes the anxiety out of learning. I don't even own a serger yet, but here I am...watching your serger video. I am so new to sewing I have not even turned on my machine but I have watched all your videos and plan to start asap. Your tutorial on How to Read a Sewing Pattern is priceless! Patterns were the most intimidating to me due to all the verbiage on them but now it's the least of my worries. One area I would love to see a video on is fabrics: Different types, what you use for projects and why (i.e. jeans, shirts, costumes), and challenges with different fabrics. There are so many options it is overwhelming! Thanks again for the time and energy you put into your videos; they are truly making a difference for us newbies:o)
Thank you so much for such a wonderful comment full of positive compliments and support! I have so many wonderful ideas to share, and it's becoming difficult to decide which videos to do next, but I'll keep popping out videos as often as I'm able. I love the idea of doing a video on fabrics, and I already have that on my list. Hope to have that one out soon :) I appreciate the support, thanks for sharing your positivity with me :)
I know this video is two years old, but I wanted to thank you for this video. I have been afraid to thread my serger for a long time. Today with your help I threaded and used my serger today.
My machine .....same as shown here........has started to not stitch properly. I opened you tube searched for a tutorial on trouble shooting my machine......and chose your tutorial........so glad I did. Your tutorial is very clearly explained and shows your procedure step by step. I followed your steps and have the stitches on the top of my test fabric forming but under neath it’s not quite right. Rethreaded several times........( I don’t know what I’m not doing right ) the thread is not sitting ( quite like yours looked ) in the channel......now it’s not stitching well at all.......I’ll rest it for now and try again. Appreciate the tutorials you have here and will be watching more of them over time. Again thank.........you for your time and expertise.....😊😊😊
I wish I’d found your tutorial about 4 hours ago! You win the prize for most concise directions. The looper threading camera angle is what helped solve my problem. Thank you so much, you’re a great teacher. Have a nice holiday! Donna, in Plymouth, MA
What an expert video! I've looked up so many videos to see what I do with the blue thread, but they never show "explicitly" how to do it. Thank you sooo much!!!
I have had a sergeant for 2 years and changing the threads has always been an adventure because it was not clear to me the route of the thread from lowerlooper (blue) to upperlooper.I watched hundreds of videos, I watched the serger's book, the diagram drawn on the sewing machine... I didn't understand anything about it ... Thank you from my heart for the clarity of your explanation and especially the absolutely detailed images of each phase. My blessings !!!!
Hello, Mr. Tock! I stumbled upon your videos a few days ago, quite by accident really and I watched one just for the hell of it. Then I watched another... Then one after that... Now I seam to be falling for your videos hooks, lining and Singer! You made the subject of sewing not only interesting but facinating! In fact, I just ordered a Singer 44S Heavy Duty Sewing Machine from Amazon! Should arrive by this Saturday. DAMN YOU, SIR! I am an amateur illustrator, I'm 63 years old, male, retired, living in Colorado. Before viewing your videos, I was content just doing my artwork, riding a bike for recreation and hand sewing defects in my old, worn clothes. Now I feel the need to make my very own Inverness Cloak, a'la Barnabas Collins from "Dark Shadows!" (Something I've always wanted.) Again, "DAMN YOU, SIR!" Anyway, thank you for your inspiration (...grumble, grumble, retch!) and I look forward to whatever you have to show in the near future. If you want to see my artwork, look up the video; "Doc Savage, The Land of Terror!" on RUclips. Ah well, if nothing else at least I can hem my pants by myself now...
lol, I know exactly how you feel! When I started sewing, I thought it was such a joke and a ridiculous thing to do... and then I fell in love with it, and here we both are. Hope you enjoy your new machine and are ready to make some wild new things! Just let it consume you and you'll find yourself making things that blow your mind :) Let me know if you have any questions along the way, thanks for the support my friend!
I agree with everyone above that this is the best threading video for the Brother 1034D serger. In addition to that I really appreciate your great close-ups.
BEST threading explanation --- clear, zoomed in views, slow clear spoken narration. GREAT JOB!! Thank you so much! I always come back to this video when I have a problem threading my machine.
oh my goodness, a year later, here I am! I broke the left needle, changed it out, rethreaded it and it's fine!! Thank you for the refresher course! I did it again! THANK YOU! Jeanie
I've been hesitant to use my serger mainly bc it looked so intimidating. Thanks to your very detailed and clear tutorial, I successfully threaded the serger, and am now excited to start using it. Thank you so much for this!
I just got my 1034DX Serger and started checking out videos as a beginner. I have been a sewer for many years buy never had a serger. I just wanted to say that I have checked out a lot of beginners videos. Let me say I was nervous about getting a serger, but as you say garments look polished, so here I am. You are the best instructor and I do hope you stay with us? I don't feel as intimidated as I was just opening the box. Keep up the good work. Thank you.
I used to sneak in to the homework teachers class after I bought a cast iron Singer sewing machine in grade 11 to learn how to sew. I've done award-winning quilt designs, theater costume making, all sorts of things, but I've always wanted to master working with stretch fabrics and to work with a more polished look. So, I just bought the brother 1034d and am modeling my way through. Your video was exceptionally helpful and I thank you a lot
The best serger tut out there. Very much appreciated. I can now pull out the serger that I’ve had in the basement for 5 years and get it up and running!
I was about to return this gift from my husband as I was certain I could not follow the manual!!!! I could feel the anxiety rising!! Then I found you!Thanx Now to learn how to use it!
Thank you again for doing this video. I needed to thread my serger again, and forgot and you brought it all back. Someone told me once that I would NEVER be able to thread it, but with your help, I did it! And again, thank you!
This is the most helpful tutorial EVER. I have this bookmarked and reference it every time I need to rethread my machine; I've never had any issues thanks to you!
BEST TUTORIAL! I went through three others before I found this one. SUPER COMPREHENSIVE and detailed. It's my very first time threading my serger and this video explained it all! THANK YOU!
Thanks to you I got my life back. I can’t tell you how much time I wasted trying to do this with the lame manual that came with the serger. I not only learned how to thread my serger but I memorized it. Your video is awesome. I especially appreciate that you didn’t talk too fast and that you showed the hardest steps more than once. Today threading, tomorrow different stitches. You rock!
I have this same serger. I had a Juki serger, but my frustration level got so high with it that I had to give it away. The last time I had to thread it, it took 50 minutes. I gave it away and got this Brother. I LOVE it! So easy to thread and does a beautiful job. I dreaded using the Juki and now I look forward to using the Brother.
Thank you !Thank you ! Great video I have had a surger for about four years and I have taken classes and watched several you tube videos and I gave up until I watched your video .
Thank you soooo much. The manual was not specific on having the "blue" thread go OVER the "green" and also that it needed to go in the area between things and out the back. I was threading it wrong when I got to that point and it wasn't working. You are my hero. I was given this used machine by a friend that designs and sews professionally, because she had upgraded to a professional machine. I love the sergers!
This has been the MOST helpful video for me in learning how to thread my serger. I was almost ready to return it with all the trouble I was having. I couldn't get it to sew. Finally, in the very last step you instruct about the threads being pulled under the foot and catching under. This is what was making me fail. Such a minor detail after going through all the steps. Thank you also for getting to the point throughout the video; extremely helpful.
You are the best. You literally wiped my tears. As a beginner, I couldn’t find any tutorials that is as explicit as this. I just subscribed to your channel. Thank you so much and God bless you.
Just wanted to say that I got my first serger for Christmas and it was this same model! Suffice it to say that this video has come in handy! Your channel helped me get into sewing last year and I picked out my serger based on what I have seen on here. I have finished three or four projects already with my serger and I couldn’t be happier with how they came out! Thank you for creating such helpful content!
THANK YOU SO MUCH for doing this in small, close up steps. I've been so frustrated and haven't touched my serger in a week because I couldn't thread it properly
Thank you so much for this tutorial. This is by far the best one I've watched. I've had my Serger for 3 years and never understood the threading part. Thank you again.
HELP! I love your videos. By far the best sewing tutorials I've found including this one on how to thread the 1034D. I've had my Brother 1034D serger for 3 months and I've already taken the machine apart once and reset the timing so the upper and lower looper stopped jamming. It's now making a clicking sound, similar to before it jammed last time, which was less than a week ago. There may not be a huge audience out there for it, but it would be AMAZING to have an in depth video on how to reset the timing of your serger and troubleshoot related issues. All of the other videos I've watched have commented that the Brother 1034D serger is trash, made of cheap parts and Brother will not service for this issue, recommending that you to take it to a local repair person. I don't have $100+ to drop every time my machine malfunctions, which according to other RUclipsrs is often. I'm considering calling it a loss and buying something of better quality, but I'd love if you could convince me otherwise?! Have you had similar issues with your serger? Any thoughts, help, tutorials would be much appreciated!
Best ever. I came back after two years and it still is the best tutorial on how to tread the surger ever. Some of them are good but not so complete as where to put end treads! Thank you Appreciate!
OK... YOU DA MASTAH. LOVED this excellently videoed tutorial on threading the Brother 1034D that I received as a gift but was too afraid to take out of the box. Your voice is like velvet... I know I will watch all of your other videos. I wish I could give a higher grade than A++++++!!! THANK YOU SOOOOOO MUCH!!
Thank you so much for watching! I'm very happy this was so helpful and that you enjoyed everything else :) Hope you're excited to make some great new projects this winter!
I was struggling for hours with #4 and I watched your video and answered all my questions and I rethreaded my machine in literal minutes. BLESS YOU SIR
THANK YOU YOU GLORIOUS HUMAN I have been sewing for well over a decade and have never threaded a serger, I KNOW, but I always relied in and prayed on the tried and true method of "just tie the thread ends and put a new cone on." The shop I used to work always told my NEVER thread a serger if you can help if. Well last week the day came where I guess I cut the threads too close and thought "good lord the day has come. It's here. I have to rethread it. Heaven help me." This video was beautiful it saved me and my serger. Thank you.
Was looking thru different videos, scrolled down quite a way and saw this, said "i can trust this guy" Sure enough! Good tutorial, well spoken no bs. Thanks! We'll see if i can successfully use mine
One of the BEST tutorials for the 1034D serger! Bought this machine two years ago and became so frustrated that I stopped trying to sew with it! You’ve inspired me to try again! Thank you! Please do more tutorials on this machine!
I can’t thank you enough for this amazing tutorial!!!!!! I just got my serger and I’ve watched a few and was thrown off and wanted to run away😭. I didn’t even want to touch my serger until I watched your tutorial and it’s like the sun came out and the storm clouds went away and all was right in the world. You are AMAZING 🤩 THANK YOU!!!!!!!!!!
You are an awesome instructor!!!!! I was afraid to start sewing with my new serger ( a year old !) but I followed your instructions to the tee and it worked perfectly!!!! Thank you !!!!!
I'm pretty new to sewing. I've done a lot of masks and a quilt and am ready to try tackling garments. I was not planning on buying a serger because I was so intimidated by the look of it. I figured it would drive me crazy trying to thread it. But this video has given me the confidence to give it a try. Thanks so much for putting out such thoughtful, detailed videos!
It's exciting that you're interested in doing so many different types of projects! Having a serger is a great way to make normal projects look extremely professional, hope you end up enjoying everything you're working on 😊
I want to thank you for this video, I bought mom a new one for Christmas, and the blue thread broke. Trust me, nerves was frayed trying to figure out how to thread it, but this video saved the day!!!!
Your video is THE best! I just completed a pair of pajama shorts with my new 1034D. Had it not been for this, I wouldn't have been able to thread the thing! While I do have a lot to learn, threading it was my biggest concern, and having accomplished that - and actually learning it - wiped out my fear and hesitation to get started. Thanks so much!
I would have never understood the instructions in the manual the way they were written. Thank you, thank you, thank you for this instruction video. You have a new subscriber!
I'm a new serger user, so I was so afraid to thread it from scratch, thinking I could never do it properly. I've been tying the threads and pulling them through when I needed to change colors, etc. Well, I went to do that today and was horrified when I screwed something up so had no choice but to completely rethread it. :) Your video made it very easy, and I successfully rethreaded it. Thank you for the great video!
You have saved my sanity! At last I understand threading the thing. I've had a love/hate relationship with it since I purchased it - mainly hate! Thank you so much.
Just want to say thank you for showing me how to thread my Brother Lock 1034 D. I looked at 2 other videos that are out there and could not tell how to do the blue looper. I am now subscribing to see all your videos!
Thanks you so much. I'm planing to by a serger and I have look at at least 10 videos. I want to tell you Ser you ore the best. I wss able to understand and to see precisely how to do this. Thanks again. God bless.
I have had this machine for about a year. Your video cleared up an issue about the thread and the thread protector. None of the other videos I have watched addressed this. I have piles of fabric, lot's of stretchy materials I have caught on clearance that I am itching to create with and will try the serger again today. With Covid, sewing has fallen to the side. I am an RN and performing venues, etc have taken the "need" for new costumes, etc fall to the side. Thanks again!!
I'm very happy this video was so helpful, let me know if you have any other questions along the way. Otherwise, have some fun getting back into making some great new projects :) Thanks for the positive comment my friend!
You saved me!!!! I haven’t used my serger in a few years because I needed to thread it. I tried and got sooo discouraged and frustrated I just put it back in the closet. I came across your video today and followed your instructions to successfully rethread my machine! Your instructions are clear, simple and easy to follow. A world of thanks & I’ve subscribed to your channel to learn more sewing tips from you. A million thanks! 😊
ah this is the best ever tutorial!!! I watched every single one out there and you were the only one that mentioned the thread going over the top of the other one!!! So I finally I had no snapping thread!! Thankyou sooooo much and so clear and so precise too!! Perfectly done, well done you!
Thank you so much for doing this video. I have my instruction manual but it’s not as intricate as you are in the threading of my brother lock 1034D. I really appreciate that you show us exactly where each thread lays on the inside of the Serger. I watched other video’s but none of them compare to your instruction video at all! Thank you again!!!
I bought my serger 2 years ago and watched this tutorial 5-6 times over the years and I finally gave it a shot. I want my two years back, it was easier than it looked 💀💀🥲
Thankyou soooooooo much. I’ve heard so many bad things about threading a serger. This is explained perfectly , my first time with a serger and you made the experience Easy as it could be .Best video ever! So appreciated. 👍👍👍👍👍👍👍👍👍👍
Hands Down the easies tutorial to follow, and I didn’t have to pause at all but could follow along nicely - thank you! Could you talk a bit about the dials on the left side of the machine, the differentials I think?
That's a great complement! The dials on the left are for doing gathering, ruffles, or flares, which is great for a lot of feminine garments, but I don't use those features very often (unless I'm doing renaissance clothing). Have some fun doing tests and seeing what you like! Thanks for watching 😊
Your tutorials are always topnotch. You should have a fashion school. I have seen many server threading tutorials but none as detailed with every step taken clearly seen as yours. After watching this, I can thread a brother 1034D like a dream, no jokes. Thanks buddy.
Thank you for your Step by Step Tutorial . I have the same Serger but unfortunately I don't have the book that it came with. Your Tutorial is the Best one I've seen, and I've watched a few before seeing yours. I will have more confidence now when I change my threads . You Take the Award for the BEST Tutorial !!!YAY!!!!!
I'm happy that your Grandmother's machine will continue to get some love! Happy to help out with the basics of this machine, enjoy all of your projects :)
❤ Thank you for the instructions for threading. In my frustration I attempted to rethread one channel. However after removing all threads, I was able to successfully thread Brother Lock 1034D. 😅👍🏾
Thank you so much!!! I only use my Serger a few times a year. And I’ve used your video a few times now, because I usually forget a part of the blue/green threading process. Please never remove this video/link I’ll need it in the future. I’d like to check out if you have other video’s for stitch modification. That would be awesome!
Wow. Thank you so much for this video. I have had my serger in the box unopened since November 2019. Shameful, I know. My regular sewing machine just broke, and while I wait to choose another, I thought it was about time I get that serger out and try it. I will be watching more of your videos for sure!
Thank you for the great video. I would add to the instructions that sometimes you have to turn the wheel on the right to get the mechanisms inside the serger accessible and to a place where you can thread them.
Thank you so much, the lower looper thread placement is CRUCIAL for the machine to work properly. I have had to revert to this video a few times . Love your videos!,
Seriously best tutorial available on this topic. I don’t even own a sewing machine. I purchased a server for a special purpose. I watched video first time for an overview; second time I used to setup my serger and voila..!...I started my project in ~30min. Thank you for such a helpful, clear and concise tutorial...really fabulous job..!
I have to say, yes this is the BEST video on serger threading. The close up shots and your patience in explaining was awsome for me as a beginner. I have tried several times with my new serger and the thread keeps breaking. I just about gave up, but now I am ready to try again! Thanks
Serger newbie here; I’ve only threaded my serger twice now since getting it but I will watch this video every time I have to in the future because I’ve never once had it not work. Such an easy tutorial to follow with great instructions and amazing results. Thank you so much for making this video!!
I just bought one of these, your video is going to be very helpful while I learn how to use it. This is my first Serger. I look forward to using it. Your very detailed and easy to understand. Thank you for making this tutorial.
I cannot tell you how perfect and on-point this video is!! I was scared to even buy a Serger because I thought I would never learn how to thread it!!! OMG I LOVE this demo... I'm a pro now!!!!!😉🥰, Thank you sooo Much!!
I came back to your tutorial so many times to refresh myself how to thread the serger again and again! The times I didn’t I definitely paid for it. Thanks again!
Thanks for showing threading up closer. My problem was that blue thread. I been putting the blue thread under the green thread and then after watching you now I put the blue thread thru that needle thingy and over the green thread. That's the part I couldn't see on all the other videos. Hugs and appreciation
This is hands down the best serger threading video EVER!! Thank you so much for this tutorial! ❤️
This is a huge compliment!! Thank you very much - I appreciate the support :)
I agree. Thank you for zooming in that has helped a great deal!!! I loved your tutorial. I just got my serger 2 days ago and was scared to do anything.
I Agree!!!! I need Tock to narrate all my life questions in this manner!!
@@TockCustom : What a wonderful video, I found your video before I thought I would return the machine...cant thank enough! This is the best video!
I agree!
best serger tutorial! no rambling, no unnecessary clips, no nail polish in the way lol. Thanks!
Hahahaha, I love the nail polish part of this comment. Thanks for watching 😀
Not the nail polish 💀💀
I just watched 3 threading videos for the Brother, yours is the best. I make 100's of dresses for charity. They go around the world.
Thank you! Thank you! I just got this serger. I watched 3 other tutorials before watching this one and yours is FANTASTIC. You are the only one who specifically mentioned pulling thread from the back when starting to thread the serger. It looked that way but no one else mentioned it. Your attention to detail is phenomenal and I can’t thank you enough. I bought the serger because I like making holiday pillowcases for children. I am particular about my sewing. I ave a zig zag stitch on my sewing machine but
is ok on the seams after to help with raveling. I do French seams on my pillowcases which of course, are time-consuming. The I got the idea of using a serger for my seams. It will be able to make the pillowcases faster! And I owe it all to you!👍
Every time I need to thread my serger I watch this video! He’s the best and his camera focuses on the machine at close up views! While other tutorials are not zoomed in they are more focused on the camera being on them instead of machine which is so hard to see. This video is the BEST!
Yay! Thanks so much for watching, hope you're having fun with all of your projects this year :D
The BEST instructions for this serger. You included a little step with the lower looper thread that I hadn’t seen before, and it’s really helped. Thanks!
You are like the Bob Ross of sewing.....Thank you so much for putting out these beginner-level tutorials! Your low-key, easy-going way of teaching with the added benefit of your calm, soothing voice takes the anxiety out of learning. I don't even own a serger yet, but here I am...watching your serger video. I am so new to sewing I have not even turned on my machine but I have watched all your videos and plan to start asap. Your tutorial on How to Read a Sewing Pattern is priceless! Patterns were the most intimidating to me due to all the verbiage on them but now it's the least of my worries. One area I would love to see a video on is fabrics: Different types, what you use for projects and why (i.e. jeans, shirts, costumes), and challenges with different fabrics. There are so many options it is overwhelming! Thanks again for the time and energy you put into your videos; they are truly making a difference for us newbies:o)
Thank you so much for such a wonderful comment full of positive compliments and support! I have so many wonderful ideas to share, and it's becoming difficult to decide which videos to do next, but I'll keep popping out videos as often as I'm able. I love the idea of doing a video on fabrics, and I already have that on my list. Hope to have that one out soon :)
I appreciate the support, thanks for sharing your positivity with me :)
I know this video is two years old, but I wanted to thank you for this video. I have been afraid to thread my serger for a long time. Today with your help I threaded and used my serger today.
Oh that's terrific! Very happy to help, thanks so much for the kind words :)
My machine .....same as shown here........has started to not stitch properly. I opened you tube searched for a tutorial on trouble shooting my machine......and chose your tutorial........so glad I did. Your tutorial is very clearly explained and shows your procedure step by step. I followed your steps and have the stitches on the top of my test fabric forming but under neath it’s not quite right.
Rethreaded several times........( I don’t know what I’m not doing right ) the thread is not sitting ( quite like yours looked ) in the channel......now it’s not stitching well at all.......I’ll rest it for now and try again.
Appreciate the tutorials you have here and will be watching more of them over time.
Again thank.........you for your time and expertise.....😊😊😊
I wish I’d found your tutorial about 4 hours ago! You win the prize for most concise directions. The looper threading camera angle is what helped solve my problem. Thank you so much, you’re a great teacher. Have a nice holiday!
Donna, in Plymouth, MA
What an expert video! I've looked up so many videos to see what I do with the blue thread, but they never show "explicitly" how to do it. Thank you sooo much!!!
I have had a sergeant for 2 years and changing the threads has always been an adventure because it was not clear to me the route of the thread from lowerlooper (blue) to upperlooper.I watched hundreds of videos, I watched the serger's book, the diagram drawn on the sewing machine... I didn't understand anything about it ... Thank you from my heart for the clarity of your explanation and especially the absolutely detailed images of each phase. My blessings !!!!
Hello, Mr. Tock! I stumbled upon your videos a few days ago, quite by accident really and I watched one just for the hell of it.
Then I watched another... Then one after that... Now I seam to be falling for your videos hooks, lining and Singer!
You made the subject of sewing not only interesting but facinating!
In fact, I just ordered a Singer 44S Heavy Duty Sewing Machine from Amazon! Should arrive by this Saturday.
DAMN YOU, SIR!
I am an amateur illustrator, I'm 63 years old, male, retired, living in Colorado.
Before viewing your videos, I was content just doing my artwork, riding a bike for recreation and hand sewing defects in my old, worn clothes. Now I feel the need to make my very own Inverness Cloak, a'la Barnabas Collins from "Dark Shadows!" (Something I've always wanted.)
Again, "DAMN YOU, SIR!"
Anyway, thank you for your inspiration (...grumble, grumble, retch!) and I look forward to whatever you have to show in the near future.
If you want to see my artwork, look up the video; "Doc Savage, The Land of Terror!" on RUclips.
Ah well, if nothing else at least I can hem my pants by myself now...
lol, I know exactly how you feel! When I started sewing, I thought it was such a joke and a ridiculous thing to do... and then I fell in love with it, and here we both are.
Hope you enjoy your new machine and are ready to make some wild new things! Just let it consume you and you'll find yourself making things that blow your mind :)
Let me know if you have any questions along the way, thanks for the support my friend!
I agree with everyone above that this is the best threading video for the Brother 1034D serger. In addition to that I really appreciate your great close-ups.
I come back to this exact video each time I re-thread my serger. Clear, simple, and easy to follow instructions.
Thank you for this great help.
Super happy this has been helpful! Thx for watching 🤗
BEST threading explanation --- clear, zoomed in views, slow clear spoken narration. GREAT JOB!! Thank you so much! I always come back to this video when I have a problem threading my machine.
oh my goodness, a year later, here I am! I broke the left needle, changed it out, rethreaded it and it's fine!! Thank you for the refresher course! I did it again! THANK YOU! Jeanie
I've been hesitant to use my serger mainly bc it looked so intimidating. Thanks to your very detailed and clear tutorial, I successfully threaded the serger, and am now excited to start using it. Thank you so much for this!
I just got my 1034DX Serger and started checking out videos as a beginner. I have been a sewer for many years buy never had a serger. I just wanted to say that I have checked out a lot of beginners videos. Let me say I was nervous about getting a serger, but as you say garments look polished, so here I am. You are the best instructor and I do hope you stay with us? I don't feel as intimidated as I was just opening the box. Keep up the good work. Thank you.
This is the best clear threading tutorial ever!!! Amazing job, thank you for taking the time to do this!!!
I used to sneak in to the homework teachers class after I bought a cast iron Singer sewing machine in grade 11 to learn how to sew. I've done award-winning quilt designs, theater costume making, all sorts of things, but I've always wanted to master working with stretch fabrics and to work with a more polished look. So, I just bought the brother 1034d and am modeling my way through. Your video was exceptionally helpful and I thank you a lot
The best serger tut out there. Very much appreciated. I can now pull out the serger that I’ve had in the basement for 5 years and get it up and running!
I was about to return this gift from my husband as I was certain I could not follow the manual!!!! I could feel the anxiety rising!! Then I found you!Thanx Now to learn how to use it!
Thank you again for doing this video. I needed to thread my serger again, and forgot and you brought it all back. Someone told me once that I would NEVER be able to thread it, but with your help, I did it! And again, thank you!
Happy this was helpful! Also, who the hell are you hanging out with that tells you you'd never be able to thread a serger?! Sounds like a jerk
@@TockCustom lol! That person is no longer in my life! Funny how that works! Love my serger! And I can thread it thanks to your help!
This is the most helpful tutorial EVER. I have this bookmarked and reference it every time I need to rethread my machine; I've never had any issues thanks to you!
BEST TUTORIAL! I went through three others before I found this one. SUPER COMPREHENSIVE and detailed. It's my very first time threading my serger and this video explained it all! THANK YOU!
Thanks so much for making it possible for this visually challenged 80 year old grandma to fix and clean her serger.
Thanks to you I got my life back. I can’t tell you how much time I wasted trying to do this with the lame manual that came with the serger. I not only learned how to thread my serger but I memorized it. Your video is awesome. I especially appreciate that you didn’t talk too fast and that you showed the hardest steps more than once. Today threading, tomorrow different stitches. You rock!
I have this same serger. I had a Juki serger, but my frustration level got so high with it that I had to give it away. The last time I had to thread it, it took 50 minutes. I gave it away and got this Brother. I LOVE it! So easy to thread and does a beautiful job. I dreaded using the Juki and now I look forward to using the Brother.
Thank you !Thank you !
Great video I have had a surger for about four years and I have taken classes and watched several you tube videos and I gave up until I watched your video .
Thank you soooo much. The manual was not specific on having the "blue" thread go OVER the "green" and also that it needed to go in the area between things and out the back. I was threading it wrong when I got to that point and it wasn't working. You are my hero. I was given this used machine by a friend that designs and sews professionally, because she had upgraded to a professional machine. I love the sergers!
This has been the MOST helpful video for me in learning how to thread my serger. I was almost ready to return it with all the trouble I was having. I couldn't get it to sew. Finally, in the very last step you instruct about the threads being pulled under the foot and catching under. This is what was making me fail. Such a minor detail after going through all the steps. Thank you also for getting to the point throughout the video; extremely helpful.
You are the best. You literally wiped my tears. As a beginner, I couldn’t find any tutorials that is as explicit as this. I just subscribed to your channel. Thank you so much and God bless you.
Just wanted to say that I got my first serger for Christmas and it was this same model! Suffice it to say that this video has come in handy! Your channel helped me get into sewing last year and I picked out my serger based on what I have seen on here. I have finished three or four projects already with my serger and I couldn’t be happier with how they came out! Thank you for creating such helpful content!
Thank you! I have a hand me down 1034D and have never ever used a serger. You just talked me through the first steps!
You are a great teacher! Thank you for giving me the confidence to finally use my serger I've had for two years 😮
THANK YOU SO MUCH for doing this in small, close up steps. I've been so frustrated and haven't touched my serger in a week because I couldn't thread it properly
Thank you so much for this tutorial. This is by far the best one I've watched. I've had my Serger for 3 years and never understood the threading part. Thank you again.
HELP! I love your videos. By far the best sewing tutorials I've found including this one on how to thread the 1034D. I've had my Brother 1034D serger for 3 months and I've already taken the machine apart once and reset the timing so the upper and lower looper stopped jamming. It's now making a clicking sound, similar to before it jammed last time, which was less than a week ago. There may not be a huge audience out there for it, but it would be AMAZING to have an in depth video on how to reset the timing of your serger and troubleshoot related issues. All of the other videos I've watched have commented that the Brother 1034D serger is trash, made of cheap parts and Brother will not service for this issue, recommending that you to take it to a local repair person. I don't have $100+ to drop every time my machine malfunctions, which according to other RUclipsrs is often. I'm considering calling it a loss and buying something of better quality, but I'd love if you could convince me otherwise?! Have you had similar issues with your serger? Any thoughts, help, tutorials would be much appreciated!
Best ever. I came back after two years and it still is the best tutorial on how to tread the surger ever. Some of them are good but not so complete as where to put end treads! Thank you Appreciate!
Thank you so much! I’ve had my serger for months but have been way too intimidated to try it! This video saved me! Thank you
OK... YOU DA MASTAH. LOVED this excellently videoed tutorial on threading the Brother 1034D that I received as a gift but was too afraid to take out of the box. Your voice is like velvet... I know I will watch all of your other videos. I wish I could give a higher grade than A++++++!!! THANK YOU SOOOOOO MUCH!!
Thank you so much for watching! I'm very happy this was so helpful and that you enjoyed everything else :) Hope you're excited to make some great new projects this winter!
I was struggling for hours with #4 and I watched your video and answered all my questions and I rethreaded my machine in literal minutes. BLESS YOU SIR
By far the best how to video for threading a serger. Thank you so so so much!!!
THANK YOU YOU GLORIOUS HUMAN
I have been sewing for well over a decade and have never threaded a serger, I KNOW, but I always relied in and prayed on the tried and true method of "just tie the thread ends and put a new cone on." The shop I used to work always told my NEVER thread a serger if you can help if.
Well last week the day came where I guess I cut the threads too close and thought "good lord the day has come. It's here. I have to rethread it. Heaven help me."
This video was beautiful it saved me and my serger. Thank you.
Was looking thru different videos, scrolled down quite a way and saw this, said "i can trust this guy"
Sure enough! Good tutorial, well spoken no bs. Thanks! We'll see if i can successfully use mine
Thank you for this video! I can now thread my serger!!
One of the BEST tutorials for the 1034D serger! Bought this machine two years ago and became so frustrated that I stopped trying to sew with it!
You’ve inspired me to try again! Thank you! Please do more tutorials on this machine!
Glad I could help! I hope to get back to making some more videos soon, life is busy but I miss making tutorials. Have a wonderful week!
Have a great year! Can’t wait to see more videos!
You are awesome. I just threaded my serger for the very first time. Thank you :)
You're very welcome! Glad you got it working :D
I can’t thank you enough for this amazing tutorial!!!!!! I just got my serger and I’ve watched a few and was thrown off and wanted to run away😭. I didn’t even want to touch my serger until I watched your tutorial and it’s like the sun came out and the storm clouds went away and all was right in the world. You are AMAZING 🤩 THANK YOU!!!!!!!!!!
Thanks so much for your videos, very helpful now I can take my 1034D out of the box that's been sitting for months.
I’m in the same boat!
Excellent! This is a super easy machine to work with and use. I hope you have a good time getting familiar with it :)
Awesome! Hope this helps you too :D
You are an awesome instructor!!!!! I was afraid to start sewing with my new serger ( a year old !) but I followed your instructions to the tee and it worked perfectly!!!! Thank you !!!!!
Thank you so much! This was simple, you didn’t get in the way of the camera, I could follow the directions easily.
I'm pretty new to sewing. I've done a lot of masks and a quilt and am ready to try tackling garments. I was not planning on buying a serger because I was so intimidated by the look of it. I figured it would drive me crazy trying to thread it. But this video has given me the confidence to give it a try. Thanks so much for putting out such thoughtful, detailed videos!
It's exciting that you're interested in doing so many different types of projects! Having a serger is a great way to make normal projects look extremely professional, hope you end up enjoying everything you're working on 😊
I want to thank you for this video, I bought mom a new one for Christmas, and the blue thread broke. Trust me, nerves was frayed trying to figure out how to thread it, but this video saved the day!!!!
Your video is THE best! I just completed a pair of pajama shorts with my new 1034D. Had it not been for this, I wouldn't have been able to thread the thing! While I do have a lot to learn, threading it was my biggest concern, and having accomplished that - and actually learning it - wiped out my fear and hesitation to get started. Thanks so much!
I would have never understood the instructions in the manual the way they were written. Thank you, thank you, thank you for this instruction video. You have a new subscriber!
BEST EVER! THANK YOU FOR ALL MY SEWING STUDENTS
I'm a new serger user, so I was so afraid to thread it from scratch, thinking I could never do it properly. I've been tying the threads and pulling them through when I needed to change colors, etc. Well, I went to do that today and was horrified when I screwed something up so had no choice but to completely rethread it. :) Your video made it very easy, and I successfully rethreaded it. Thank you for the great video!
You have saved my sanity! At last I understand threading the thing. I've had a love/hate relationship with it since I purchased it - mainly hate! Thank you so much.
Thank you so much tock!! After watching numerous videos... This prevented me from pulling my hair out, so thank u!!! ❤❤
Just want to say thank you for showing me how to thread my Brother Lock 1034 D. I looked at 2 other videos that are out there and could not tell how to do the blue looper. I am now subscribing to see all your videos!
Thanks you so much.
I'm planing to by a serger and I have look at at least 10 videos. I want to tell you Ser you ore the best. I wss able to understand and to see precisely how to do this. Thanks again. God bless.
You are so welcome, thank you very much for watching! Happy to be helpful :)
I couldn't thread my 1034D BROTHER serger without this video. THE BEST!
Thank you so much Lynn!! Hope you're having a great week 😊
I have had this machine for about a year. Your video cleared up an issue about the thread and the thread protector. None of the other videos I have watched addressed this. I have piles of fabric, lot's of stretchy materials I have caught on clearance that I am itching to create with and will try the serger again today. With Covid, sewing has fallen to the side. I am an RN and performing venues, etc have taken the "need" for new costumes, etc fall to the side. Thanks again!!
I'm very happy this video was so helpful, let me know if you have any other questions along the way. Otherwise, have some fun getting back into making some great new projects :) Thanks for the positive comment my friend!
You saved me!!!! I haven’t used my serger in a few years because I needed to thread it. I tried and got sooo discouraged and frustrated I just put it back in the closet. I came across your video today and followed your instructions to successfully rethread my machine! Your instructions are clear, simple and easy to follow. A world of thanks & I’ve subscribed to your channel to learn more sewing tips from you. A million thanks! 😊
This is my first surger Thank you so much......
You're very welcome, thank you for watching!
When ever I have to re-thread my serger I go to this video. The best tutorial. Thanks
❤
Gracias Gracias Gracias thanks to you I finally threaded this machine. Your video is clear to follow. You are the best!
Excellent! Very happy this was so helpful ☺️
ah this is the best ever tutorial!!! I watched every single one out there and you were the only one that mentioned the thread going over the top of the other one!!! So I finally I had no snapping thread!! Thankyou sooooo much and so clear and so precise too!! Perfectly done, well done you!
Thank you so much for doing this video. I have my instruction manual but it’s not as intricate as you are in the threading of my brother lock 1034D.
I really appreciate that you show us exactly where each thread lays on the inside of the Serger.
I watched other video’s but none of them compare to your instruction video at all!
Thank you again!!!
I bought my serger 2 years ago and watched this tutorial 5-6 times over the years and I finally gave it a shot.
I want my two years back, it was easier than it looked 💀💀🥲
This is the best video after several that I have watched , my machine is working again, thank you very much .
Your explanations are so clear and precise that I understand perfectly. Thank you truly ⚘
Thank you so much, very happy you got your machine working :D
Thankyou soooooooo much. I’ve heard so many bad things about threading a serger.
This is explained perfectly , my first time with a serger and you made the experience
Easy as it could be .Best video ever! So appreciated.
👍👍👍👍👍👍👍👍👍👍
Hands Down the easies tutorial to follow, and I didn’t have to pause at all but could follow along nicely - thank you!
Could you talk a bit about the dials on the left side of the machine, the differentials I think?
That's a great complement! The dials on the left are for doing gathering, ruffles, or flares, which is great for a lot of feminine garments, but I don't use those features very often (unless I'm doing renaissance clothing). Have some fun doing tests and seeing what you like! Thanks for watching 😊
Yesss. Thank you! I was able to follow your instructions perfectly and successfully got my machine threaded.
Your tutorials are always topnotch. You should have a fashion school. I have seen many server threading tutorials but none as detailed with every step taken clearly seen as yours. After watching this, I can thread a brother 1034D like a dream, no jokes. Thanks buddy.
Thank you for your Step by Step Tutorial . I have the same Serger but unfortunately I don't have the book that it came with. Your Tutorial is the Best one I've seen, and I've watched a few before seeing yours. I will have more confidence now when I change my threads . You Take the Award for the BEST Tutorial !!!YAY!!!!!
Definitely the best and thank you for adding the part that explains why you sew with both machines! Totally clarified it for me!!!
I'm glad to see more serger videos. When I got mine I couldn't find any information on RUclips on how to use it. Thank you!
You're very welcome! Hope you got your working right away :)
Thanks for watching, have a wonderful week!
I inherited my Grandma's serger when she could no longer see well enough to sew and this video is extremely helpful, thank you!
I'm happy that your Grandmother's machine will continue to get some love! Happy to help out with the basics of this machine, enjoy all of your projects :)
This video is so very helpful and I still refer to it when I get stuck. Thanks so much.
❤ Thank you for the instructions for threading. In my frustration I attempted to rethread one channel. However after removing all threads, I was able to successfully thread Brother Lock 1034D. 😅👍🏾
Thank you so much!!! I only use my Serger a few times a year. And I’ve used your video a few times now, because I usually forget a part of the blue/green threading process. Please never remove this video/link I’ll need it in the future. I’d like to check out if you have other video’s for stitch modification. That would be awesome!
Wow. Thank you so much for this video. I have had my serger in the box unopened since November 2019. Shameful, I know. My regular sewing machine just broke, and while I wait to choose another, I thought it was about time I get that serger out and try it. I will be watching more of your videos for sure!
Thank you for the great video. I would add to the instructions that sometimes you have to turn the wheel on the right to get the mechanisms inside the serger accessible and to a place where you can thread them.
Best video ever. I have never touched one before, but now I feel confident to go try it!
Thank you so much, the lower looper thread placement is CRUCIAL for the machine to work properly. I have had to revert to this video a few times . Love your videos!,
Seriously best tutorial available on this topic. I don’t even own a sewing machine. I purchased a server for a special purpose. I watched video first time for an overview; second time I used to setup my serger and voila..!...I started my project in ~30min. Thank you for such a helpful, clear and concise tutorial...really fabulous job..!
I have to say, yes this is the BEST video on serger threading. The close up shots and your patience in explaining was awsome for me as a beginner. I have tried several times with my new serger and the thread keeps breaking. I just about gave up, but now I am ready to try again! Thanks
Serger newbie here; I’ve only threaded my serger twice now since getting it but I will watch this video every time I have to in the future because I’ve never once had it not work. Such an easy tutorial to follow with great instructions and amazing results. Thank you so much for making this video!!
Glad it was helpful! Very happy to have your support, thanks for watching 😊
Thanks to you, I no longer fear rethreading my serger!
Bravo! Well demonstrated!!! I love your demos
Thank you so much for watching! Hope you have a terrific weekend
Thank you sooooo much! I watched several before this one with no success, yours was the best!!
great tutorial, very detailed,clear , and no wasted time. Very well prepared
Thank you very much! I try to get right to business
I just bought one of these, your video is going to be very helpful while I learn how to use it. This is my first Serger. I look forward to using it. Your very detailed and easy to understand. Thank you for making this tutorial.
I cannot tell you how perfect and on-point this video is!! I was scared to even buy a Serger because I thought I would never learn how to thread it!!! OMG I LOVE this demo... I'm a pro now!!!!!😉🥰, Thank you sooo Much!!