This is like on the edge of: Im an experienced pilot, im in the cinematographie buisness, Cinewhoop isnt agile enough but quality of the o3 is also not good enough. A lot of work but the buil turned out awesome
Great video. A few questions: 1) How thick is the bottom plate? 2) Can this quad take a slight beating or will warp the gopro electronics if you try too many stunts? I geddit its a cinewhoop 3) Based on your experience with the quad do you think its a feasible option to use on set? I have both the frames. On the fence to build it.
Amazing video! I have an XDrei frame from them, and I didn’t have time to complete the build yet. I was planning to scrape my old Cinelog25 (I have some good overpowered RCinpower motors there, and swap the props between 2.5” and 3” when needed. This would let me use also the scraped prop guards from the Cinelog25 (which are 4 independent pieces). Another mod I would like to try, is to make an adapter for the top plate to use it on a 4” mini long range which would really benefit from this kind of aerodynamic, instead of having this big huge sail in the front.
J'adore ! Super vidéo, super explications, J'étais parti pour survoler ta vidéos mais je me suis laissé entrainé! et c génial c'est un vrai partage d'expérience! bravo à toi et merci pour ce que tu nous transmet! je vais surement faire le même build du coup! ✌
agree, but there's a true feeling of love when its complete. like its your own blood rather than adopted . haha . and i added up the total for parts. pushing $800. expensive lil fella
@@ronniefay_ It's mainly decasing the GoPro that is most concerning to me, but not having a flat and forward facing plate to catch all that wind does sound like a solid improvement. On that note, what filters would fit the bare GoPro lens?
If only you could just use a second O3 Camera Unit and DJI made an Air unit that takes dual camera input (one for Tx to the pilot, one for recording). This idea is where FPV drones need to go for the future, but there's just so many tiny parts exposed to impact damage in this execution :/ Cool to see working though 👍
@@ronniefay_ it's marginal tbf. Both have a very action cam look. But with the new O4 camera and just the weight saving for this class of quad, it would be huge.
This is like on the edge of: Im an experienced pilot, im in the cinematographie buisness, Cinewhoop isnt agile enough but quality of the o3 is also not good enough. A lot of work but the buil turned out awesome
Nailed it 🔥😂. Thanks
The DJI O4 system is staged to bring us a lot more bandwidth so we might actually see a better camera unit in the near future to make use of that :)
Thanks for the video. That is a wild naked GoPro solution. Wow!
Great video. A few questions:
1) How thick is the bottom plate?
2) Can this quad take a slight beating or will warp the gopro electronics if you try too many stunts? I geddit its a cinewhoop
3) Based on your experience with the quad do you think its a feasible option to use on set? I have both the frames. On the fence to build it.
Is it possible to make some modular system that allows for the gopro unit to be swapped fast to multiple quads? Maybe if all Redkyte frames? hmm.
Keren kawan drone teringan sedunia + Action cam
Great video! Background music is a little too loud.
thank you. noted, appreciate the feedback
Amazing video!
I have an XDrei frame from them, and I didn’t have time to complete the build yet. I was planning to scrape my old Cinelog25 (I have some good overpowered RCinpower motors there, and swap the props between 2.5” and 3” when needed. This would let me use also the scraped prop guards from the Cinelog25 (which are 4 independent pieces).
Another mod I would like to try, is to make an adapter for the top plate to use it on a 4” mini long range which would really benefit from this kind of aerodynamic, instead of having this big huge sail in the front.
Awesome . Yea this too plate is one of a kind. Would be nice to have additional frames to support it .
Love this content. Please consider non music versions for future edits.
thanks ! and yes I agree the audio levels got a little outta hand. editing through the night and it shows. haha 😵💫😅.
Going to +1 this comment. Just remove it. Or use it only on b roll
wow no wonder its less than 250. awesome job
appreciate it! yea super unique design.
Hi, Great video. I was wondering if there is enough space for full size VISTA at the back?
J'adore ! Super vidéo, super explications, J'étais parti pour survoler ta vidéos mais je me suis laissé entrainé! et c génial c'est un vrai partage d'expérience! bravo à toi et merci pour ce que tu nous transmet! je vais surement faire le même build du coup! ✌
Advanced build, well done
Thanks bro
Thank you for the video man. Looking forward to building my own. Do you know maybe how much the frame weights by itself? Cheers
Carbon and hardware I am not sure . That may be info you can find on redkyte drone info page . Usually they have frame weight. Thanks !
@@ronniefay_ Surprisingly I did not find it, but I will ask! thanks!
ive done the same mistake with multiple drone... reversing black and red power wire XD and btw ive an finger skate on my computer dash too :D
does this work on gopro 12? not sure if the flex cables etc are all thge same number of pins, etc. Great and awesome video by the way!
I believe it will work with gp12. But you should confirm with redkyte.
I use the freewell Mavic 2 zoom nd kit.
Thanks !
Great video. If I could buy this as a BNF, it might be just the ticket.
agree, but there's a true feeling of love when its complete. like its your own blood rather than adopted . haha . and i added up the total for parts. pushing $800. expensive lil fella
@@ronniefay_ It's mainly decasing the GoPro that is most concerning to me, but not having a flat and forward facing plate to catch all that wind does sound like a solid improvement. On that note, what filters would fit the bare GoPro lens?
@@Tphive maybe find a cheap broken GoPro and tear it apart to get comfortable doing it. If your really thinking about doing the build
If only you could just use a second O3 Camera Unit and DJI made an Air unit that takes dual camera input (one for Tx to the pilot, one for recording). This idea is where FPV drones need to go for the future, but there's just so many tiny parts exposed to impact damage in this execution :/ Cool to see working though 👍
the whole point is to use the gopro which offers better quality
@@ronniefay_ it's marginal tbf. Both have a very action cam look. But with the new O4 camera and just the weight saving for this class of quad, it would be huge.
Have you tried different batteries and what flight time you got with it in flowy cinematic fly?
Only use the 650, 5- 6 minutes
Where is the link to the radio control and equipment named in the video?
How easy is it to replace the prop guards in case they break on filming location?
Pretty easy , no harder than most other drones
awesome build im gonna try it! what Pairs do you trade?
Awesome! And I’m not sure what you mean by pairs I trade ?
Stocks ? Usually SPY and blue chip stock options ( Amd, SMCI , nvda, Tsla, appl,etc) :)
the cool man I trade forex Indices, but I want to learn more about futures & options trading @@ronniefay_
Sold Out..
🔥
🤠🤙🏼
Good image ❤😊
I'm glad you like it
Any idea where to buy this? Sold out on the official website
Unfortunately I had same issue and waited until it was back in stock.
Is this a 3in right? Would still be suitable for indoor like real estate?
This is a 2.5” . With the right rates a great indoor flyer .
sick! bro!
🔥🔥
edit go hard
Gotta keep it interesting 😉
What aio is that?
Speedybee f745 35a as seen in video