Thanks for the really in depth and beginner friendly video. I am just getting into fpv and so many videos assume the viewer already know the basics and I don’t lol. Particularly, I was confused why RX and TX were crossed on the control link. A couple other videos I watched just said “remember to cross these wires” with no explanation as to why which was confusing to me because I didn’t know what the letters meant and wondered why you wouldn’t pair like connections. Your video has really helped to clarify the process of building an fpv drone for me.
Great video! Pls keep making drone builds. And we need link to direct purchase so we dont need to cruise around finding parts. Keep it up brother, fly on!
I recently found the supafly setup with my v3 stack and OH MY! It feels amazing! Makes me want to buy his frame now also. Just load the preset and go! Now you just need the Bubby spoiler mod. 😉
What size capasitor did you solder onto the battery leads? Very easy vid for a beginner to understand. This is the exact build I was planing on building but I will use a DJI controller and goggles.
I'm also using the F405 V4 and ELRS. I did'nt remove the RX Cables from the O3 Unit. Just configurated in betaflight the ELRS RX and I works like a charm.
Good video, what battery do you recommend I use, I have in mind a 1550 6s, my motors are 2207 1860kv 6s. They are 24 v, there is no problem using a 22.2 v one, and it does not affect the ESC or the driver
Hi, I wrote you from Argentine. What tape did you use to mount the dji o3 on the frame and where can I buy the camera spacer for the fpv camera mount? Thanks.
Sorry to ask more questions but i cant find this frame anywhere other than rotoriot and they are charging 100 dollar shipping to australia. Would the DJI camera work in your speedybee build? or can i get this frame cheaper somewhere?
Great video, thanks man. Where do you usually buy all these parts? Ive been looking at Ali and amazon, but can't find any of the names you set. Based in north Europe.
I buy most of my parts from Pyrodrone. They are located in California, USA. But I also order from RaceDayQuads and GetFPV they are both in Florida, USA. Some of the vendors do list on amazon though. Check Banggood.com, they have lots of fpv stuff. Its kinda like Chinese amazon.
Ok bro nice one, will try it on my next build. Also, you’re getting 50mbps, I’m from the uk so done the fcc hack. Not sure if you have to do that where you are but you running on auto low power mode, or off?
@@Jackdronesmedia Im in the U.S and we get 50mbps out of the box but I still do FCC hack to unlock all 3 channels at 50mbps. I run the auto low power on all my O3 quads and haven't had an issue, as soon as I arm it goes full output which you can see in the OSD for mbps.
Hello, how are you?, I'm assembling my first fpv drone if I leave the 6pin cable of DJI 03 connected and put a receiver elrs is there any problem leaving the two connected together?, I use a DJI controller 2
Well if you’re using the DJI controller 2 then you can bind that to the DJI O3 air unit. The controller 2 will only work with the O3 air unit, it won’t work with any other receivers like elrs or crossfire. So if your using the controller 2 just leave all 6 wires hooked up and the O3 air unit will be your receiver. In betaflight on the receiver tab set it to sbus, then use the bind button on the O3 and put the controller 2 into binding mode and they will link. There should be plenty of videos showing how to set that up though. Hope this helps 👍
Out of curiosity I was looking into the integra googles and using the o3 air unit on a build, but do they require remoteID to use them or is it still “optional” on DIY drones
Yeah technically I think everyone is supposed to have remote ID on all their drones wether they are home built or not. That being said probably 90% or more of people who build and fly don't have it and never will. The Government is not gonna come knocking at your door unless you fly somewhere super illegal like an airport and then post the video online. My recommendation is just not to worry about it and fly safely in areas you know aren't illegal or unsafe to fly in, pay attention and use common sense.
@@AdarshChandruofficial yes you can use any remote as long as the receiver will connect to it. you can use the dji remote 2 and connect directly to the air unit. or I recommend using ELRS like I am in the video and most people do. the receivers are cheap and easy to buy anywhere. And a wide variety of remotes to choose from. any controller that has ELRS built into it will connect to any drone with an ELRS receiver. doesn't matter what video system your using. the remote and receiver are separate from the O3, unless you are using the dji remote 2. you could use the O3 with ELRS or TBS Crossfire or ghost. you are buying the remote based on what control link you want not based on the O3, again unless you are going to use the O3 as your receiver with the dji remote 2. hope this makes sense.
I’m new in this, does the o3 module just transmit video or does it also control the drone, I’m confused because it’s says that the fpv controller 2 is compatible with the o3 module so this means that the o3 controls the drone?
As long as your radio has elrs and the drone receiver is elrs they will bind and work fine. Just make sure the receiver is 2.4ghz. There is elrs 900mhz but it’s not very common for freestyle quads. A 1400 6s would be fine. Make sure you get 6s motors this build I did was 4s.
@@capbabyface I didn't put links to the parts. I have the parts list in the description. I buy almost all my parts from pyrodrone. You should be able to find them there if not race day quads or getfpv will have the parts. And this particular frame was from rotorriot.
@@andrewmedia3568 you a legend mate, earnt a subscriber. Thank you so much for taking the time to reply to my questions so quickly Great build. What exact batteries do you use BTW
@@RaunMurphy I buy the most from pyrodrone. Mainly because they are closest to me so shipping times are fast. But getfpv and racedayquads are the other 2 main places. They are in Florida. And rotorroit has some stuff to but id say pyrodrone and raceday are the ones I order the most from.
@@andrewmedia3568 I spent so long learning how to print on enders, but I just press print and get better results with this. 1kg of tpu is 20$ and you can print all you need from online models.
Technically about 6 miles. Ive seen people fly them further, but the main limiting factor is how big of a battery you can strap on and still fly. This is a 5" quad made for general flying and freestyle. Once you get into the 7" class you can support larger batteries and fly longer/further.
Thanks! no video showed or explained all that goes with the wires of the dji 03 unit. Hard to make sense of this on bardwells videos since he dosn't like to use the dji controller. understandable...
Thanks for the really in depth and beginner friendly video. I am just getting into fpv and so many videos assume the viewer already know the basics and I don’t lol. Particularly, I was confused why RX and TX were crossed on the control link. A couple other videos I watched just said “remember to cross these wires” with no explanation as to why which was confusing to me because I didn’t know what the letters meant and wondered why you wouldn’t pair like connections. Your video has really helped to clarify the process of building an fpv drone for me.
Glad I could help!
Blue jay is a level up for sure.
good informative vid bro, i just picked up goggles 2 aswell just waiting on parts to build my first quad
Nice good luck with your build 🤘
Great video! Pls keep making drone builds. And we need link to direct purchase so we dont need to cruise around finding parts. Keep it up brother, fly on!
Thanks!
Sick build, nice flying. Copying. Thanks
thanks for taking the time to explain so thoroughly 👍
Glad it was helpful!
tkx for this build. i will soon make my fyrst
🤘no problem, you got this!
Yo bro idk if you remember me, but I've been with all you're vids sense 100 subs. Great job bro!
the power is really good
man i just did your speedy bee build. Time to build another one!!
I recently found the supafly setup with my v3 stack and OH MY! It feels amazing! Makes me want to buy his frame now also. Just load the preset and go!
Now you just need the Bubby spoiler mod. 😉
Congratulations!
Beautiful build, great vid, so damn cool!
Thank you I appreciate it. 😁
Awesome video dude
Thanks! I appreciate it.
What size capasitor did you solder onto the battery leads? Very easy vid for a beginner to understand. This is the exact build I was planing on building but I will use a DJI controller and goggles.
I usually stick with 1000uF. But if your flight stack comes with a capacitor I would just use the one they give you.
I'm also using the F405 V4 and ELRS. I did'nt remove the RX Cables from the O3 Unit.
Just configurated in betaflight the ELRS RX and I works like a charm.
Nice, thanks for the info I appreciate the input 🤘
Good video, what battery do you recommend I use, I have in mind a 1550 6s, my motors are 2207 1860kv 6s. They are 24 v, there is no problem using a 22.2 v one, and it does not affect the ESC or the driver
That 1550 6s would work perfectly. 👍
Where can i find those wires you used for the reciever?
Maybe Amazon. For sure on any of the vendor sites like get fpv, pyrodrone and racedayquads.
Hi, great build btw. How long is the flight time of this drone?
Hi, I wrote you from Argentine. What tape did you use to mount the dji o3 on the frame and where can I buy the camera spacer for the fpv camera mount? Thanks.
Sorry to ask more questions but i cant find this frame anywhere other than rotoriot and they are charging 100 dollar shipping to australia. Would the DJI camera work in your speedybee build? or can i get this frame cheaper somewhere?
I ask the Lord to let me grow in fear, wonder, and joy.
What props should I buy?
Thanks for the great vid btw
@CuBeR-bj7eb idk any 5” props will do. I use HQ J37 props.
What battery are you using ?
Ovonic 1550 Mah 4s
is that a stock tune ?
No betaflight presest tune. It’s the supafly 5” freestyle tune. I only use his pids, I set my own rates. I use this tune on literally all my quads.
Great video, thanks man. Where do you usually buy all these parts? Ive been looking at Ali and amazon, but can't find any of the names you set. Based in north Europe.
I buy most of my parts from Pyrodrone. They are located in California, USA. But I also order from RaceDayQuads and GetFPV they are both in Florida, USA. Some of the vendors do list on amazon though. Check Banggood.com, they have lots of fpv stuff. Its kinda like Chinese amazon.
Thank you very much!!
Bro does that RX not Intefere with your fc or gyro?
Not that I can tell, I have 2 or 3 quads that have the RX taped to the top of the FC and I've never had an issue. 🤷♂️
Ok bro nice one, will try it on my next build. Also, you’re getting 50mbps, I’m from the uk so done the fcc hack. Not sure if you have to do that where you are but you running on auto low power mode, or off?
@@Jackdronesmedia Im in the U.S and we get 50mbps out of the box but I still do FCC hack to unlock all 3 channels at 50mbps. I run the auto low power on all my O3 quads and haven't had an issue, as soon as I arm it goes full output which you can see in the OSD for mbps.
Ah strange. For some reason I only get it if it’s off 🤔
Hello, how are you?, I'm assembling my first fpv drone if I leave the 6pin cable of DJI 03 connected and put a receiver elrs is there any problem leaving the two connected together?, I use a DJI controller 2
Well if you’re using the DJI controller 2 then you can bind that to the DJI O3 air unit. The controller 2 will only work with the O3 air unit, it won’t work with any other receivers like elrs or crossfire. So if your using the controller 2 just leave all 6 wires hooked up and the O3 air unit will be your receiver. In betaflight on the receiver tab set it to sbus, then use the bind button on the O3 and put the controller 2 into binding mode and they will link. There should be plenty of videos showing how to set that up though. Hope this helps 👍
im sorta of new to all this FPV stuff but do I need the Happymodel 2.4G ELRS EP1 Dual TCXO True diversity if im using a DJI remote?
@@ABYSSSP7FN No, if your using the DJI remote you will link that with the o3 air unit. You don’t need the elrs receiver.
Out of curiosity I was looking into the integra googles and using the o3 air unit on a build, but do they require remoteID to use them or is it still “optional” on DIY drones
Yeah technically I think everyone is supposed to have remote ID on all their drones wether they are home built or not. That being said probably 90% or more of people who build and fly don't have it and never will. The Government is not gonna come knocking at your door unless you fly somewhere super illegal like an airport and then post the video online. My recommendation is just not to worry about it and fly safely in areas you know aren't illegal or unsafe to fly in, pay attention and use common sense.
@@andrewmedia3568 100% agree, I was more worried about dji locking down their headset video because it’s not connected to remoteID
What remote controller you use for the O3 unit ? DJI or something else ? You did not explain about that ? Can you suggest?
Yeah sorry.. My controller is the RadioMaster Boxer.
When buying remote controllers for DJI O3? What should one consider? Can I use any controller ?
@@AdarshChandruofficial yes you can use any remote as long as the receiver will connect to it. you can use the dji remote 2 and connect directly to the air unit. or I recommend using ELRS like I am in the video and most people do. the receivers are cheap and easy to buy anywhere. And a wide variety of remotes to choose from. any controller that has ELRS built into it will connect to any drone with an ELRS receiver. doesn't matter what video system your using. the remote and receiver are separate from the O3, unless you are using the dji remote 2. you could use the O3 with ELRS or TBS Crossfire or ghost. you are buying the remote based on what control link you want not based on the O3, again unless you are going to use the O3 as your receiver with the dji remote 2. hope this makes sense.
I’m new in this, does the o3 module just transmit video or does it also control the drone, I’m confused because it’s says that the fpv controller 2 is compatible with the o3 module so this means that the o3 controls the drone?
@@alexisduarte3917 yes the o3 unit does transmit video but can also be used as your radio link to control the drone. Or you can use elrs or crossfire.
@@andrewmedia3568thank you very much for the answer, could you tell me what is the capacitor for?
@@alexisduarte3917 Its to soak up electrical noise during flight and prevent voltage spikes and sparks when first plugging in your battery.
Thanks
I got raidomaster zorro elrs I think. Will that work for this build. How big of a battery can I go with? I want to go with a 1400 6s battery
As long as your radio has elrs and the drone receiver is elrs they will bind and work fine. Just make sure the receiver is 2.4ghz. There is elrs 900mhz but it’s not very common for freestyle quads. A 1400 6s would be fine. Make sure you get 6s motors this build I did was 4s.
Thank you for responding back and for the great video
@@capbabyface no problem happy to help. 👍
Do you have links to the parts?
@@capbabyface I didn't put links to the parts. I have the parts list in the description. I buy almost all my parts from pyrodrone. You should be able to find them there if not race day quads or getfpv will have the parts. And this particular frame was from rotorriot.
Could I run this on 4s?
@CuBeR-bj7eb yes im running 4s on it in the video. 👍
@@andrewmedia3568 you a legend mate, earnt a subscriber. Thank you so much for taking the time to reply to my questions so quickly Great build. What exact batteries do you use BTW
Do you have a name of a shop I can purchase the things you use in your build
@@RaunMurphy I buy the most from pyrodrone. Mainly because they are closest to me so shipping times are fast. But getfpv and racedayquads are the other 2 main places. They are in Florida. And rotorroit has some stuff to but id say pyrodrone and raceday are the ones I order the most from.
Do you have a 3d printer? A1 mini is 200$ and prints tpu parts like this like a champ!
I don't have a printer. thats seems like a good price for one though. Ill check it out.
@@andrewmedia3568 I spent so long learning how to print on enders, but I just press print and get better results with this. 1kg of tpu is 20$ and you can print all you need from online models.
What’s the range on this?
Technically about 6 miles. Ive seen people fly them further, but the main limiting factor is how big of a battery you can strap on and still fly. This is a 5" quad made for general flying and freestyle. Once you get into the 7" class you can support larger batteries and fly longer/further.
6:26 thats what she said
Nice 😂
@@andrewmedia3568I mean u said it 3 times in a row 😂
Gotta have that nice BIG TIP!
Nice video, may I collaborate with you?
Thanks. Sure that sounds great. 😁👍
@@andrewmedia3568 How can I contact you?
@@rubychan-22 I’ll send you a message on instagram.
No gps?
Not on this build. This one is strictly a freestyle basher.
Thanks! no video showed or explained all that goes with the wires of the dji 03 unit. Hard to make sense of this on bardwells videos since he dosn't like to use the dji controller. understandable...
You should delete this comment.... lol
Yellow sbus wire has to be connected if using DJI controller. If not, then unpin
V3 is better IMO!
Ugliest frame i have ever seen. Too wide.
🤣 ok thanks
The frame is looks sick i my opinion.