Flywoo X30: Testing With Dji O3, Dji Vista, And 2 AIOs - Insane Results!
HTML-код
- Опубликовано: 5 окт 2024
- Long video on applying and testing the Flywoo X30 solution on an O3, a Vista, and two AIOs. I tested everything from data and power transferring to video link when and after submerged.
www.quadsensei...
amzn.to/3LGQdfv
My field power amzn.to/3X0EzBw
My charger amzn.to/3T33jHW
My lipo discharger amzn.to/3T453AO
For Inquires:
Dax Neal licensed part 107 pilot in Arkansas
Dax.Neal@gmail.com
www.FlowMotionAerial.com
www.QuadSensei.com
Patreon:patreon.com/Da...
Follow me:
/ quadsenseidesigns
/ flowmotionaerial
/ daxtasyfpv
/ dax.neal
#fpv #flywoo #drone
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
I definitely appreciate the thorough test on this stuff though. Best video I've seen on it yet
@@ThedonnyLlama thank you!
So crazy I literally posted in B2FPV about someone making an honest review then testing it in real life situation
Great. I ordered the X30 several weeks ago. I'm satisfied. I used it in all PCBA products to protect all expensive electronic products.
great stuff! ive been coating all my boards with it since I got it. great vid and great demonstration of its capabilities
OK First let me say that I am brand new to your channel and today you have won a fan. I am a subscriber to sooo many channels it has lost meaning to me... But I will be checking out your existing catalog and will be looking forward to any new content from you.
That said, the video was very long, a bit too much... there was a lot of stuff that was not necessary to tell the story, but who am i, i am known for being extremely wordy... and have been in trouble at work because of it which has made me feel shitty and self conscious so take what I say as you like it....
Anyway, this product looks great, I almost bought some a week or so ago... did not know if it was any good so this is super good to know! Cheers
You’re right and I agree. I’m aware of it but I’m not ready to change the style because I’m not going into it to be a profession, if you will. I know I could grow faster by taking prep steps and planning, but then it wouldn’t be fun for me. I enjoy making videos as part of my FPV ride but I don’t have a goal to be a YT creator per se. I basically record for me and take others along for the ride. I get curious and like to try things but don’t like to script things and reshoot etc.
Probably should but if it’s not easy or stress free, I’m not doing it. For now I like to be raw and when I get some positive response back, I’m good.
Thanks for the advice and kind words brother! I do appreciate it.
@@DaxNealFPV Hey, thanks for the reply. This was one of the first times I think i ever posted anything slightly negative (video was too long...) I am super glad you are having fun with this and FPV, that is very fortunate.
I did really enjoy the presentation, the details you included, etc. I do not think that just anyone can do what you are doing, it is a skill. Yea lots of people do but infinitely more fail at it or could never get it going so keep it up for sure! Cheers
Stoked on this spray
As far as not transmitting while submerged, I’m an RF network analyst for a living. Radio frequency signals just don’t travel through water very well, so even a couple of inches of water is enough to block radio signals (like how the car radio fades out in a rain storm) except for extremely low frequencies (which could never be used for FPV). I’m sure they’re still transmitting, it just isn’t going anywhere except into the water.
You are a legend bro !!! Much respect from uk , you showed me the way through naked vista tiny whoops & I appreciate your attention to detail through this !
I’ve gone down the worry free fpv rabbit hole & frustrated drydrone not available anymore , your extensive water test give me clarity ! Cheers boss man
😎🤜🔥🤛
Your videos are amazing brotha 👍. Very well done,definitely going to check this product out!
I appreciate it!
27:13 short. It will run fine in a freezer. Heat dissipation will be better in water than air anyway
Mads tech did a review on this and it does in fact rub off so just spray it back on of you rub it off. The dip method in genius but the spray will work good out in the field just in case you have some river or wet grass to contend to. Amazing stuff I'll be getting me some here soon. Thank you bro very quality VIDEO
Great video Dax! Thanks for putting it together!
@@somedroneguydotcom thank you brother!
Hey men great suff you got going thank you for the review of the x30 . I got me a bottle as soon i heard of it .
very nice video. you covered all. let's see now if we can order it in eu without customs problems .
I wonder if it rubs off really easily though. Like maybe try testing after rubbing your finger on it or something
IV always used Clear coat spray can.
Ok what about a cased o3? I want to do this to my Pavo20 that has a cased o3. Just dunk whole box and shake it out?
I’d just dunk the whole thing. With the casing, durability should not be an issue as it’s protected from scrapes.
I think the vtx and o3 failed because the braided cables for the camera is not water tight, it’s just fabric over the wire
Possibly but the amount of that cable that was submerged should be covered too. I’ll try dipping the cable and retry.
I take it the current shake and bake dry drone isn’t the same as what it used to be? I see some for $40 on dry drone Shopify
@@Roflgator7 same stuff + tax + shipping
What is the coating's durability? Will it hold up well enough for FPV? Is not it going to disappear as we crash all the time?
Id say 99% of my crashed do not touch my stacks. If it did, squirt, squirt or a dunk should do the trick.
@@DaxNealFPV Does the X30 function well with ESCs as well? roughly 35 amps or more?
@@prathmeshdk yes. Seems to do a good job on anything.
You could also cover exposed areas with conformal for extra durability of exposed surfaces.
I really dont think the 03 will be water proof like the vista as the way you dismantled the vista and not with the 03
is it possible that the short you get when submerged is caused by the soldering you are doing on the power wires switching between the vista and 03? Maybe rubbed it off? Solder heat?
@@MrFadjule most likely not as I had done the tests more than what was shown. I’m stumped honestly.
What’s that hex system on your wall?
Hello sr. You think that i could use that product on a go pro bones? Thanks!
@@gonzarb93 I haven’t tested that but I do not see why not
I have tried. Yes, X30 can be used for all PCBA.
Uhhh this stuff is a joke obviously. If you use a similar method of conformal coating you get much better results. Except you have to actually consider the electrical connections. If electricity can flow through the protection then its not protection. The air units are shorting out almost certainly. The product wears of quickly and is much more expensive. This may be better for lazy builders but MG 422C properly applied is still the way.
PS I can't find the clip of the submerged O3. Video was way too long.
If save is essential then I wouldn’t do a cable. Only pcb
That’s just my opinion. I have next to no knowledge
Also I think the board haven’t conected straight due to layer of protection 😊
hand blurs ur face alot fyi
Yeah that’s annoying. I’ll have to turn off the AF and loose the bokeh.