Hey! I had the door handle gremlin, happened about 3 weeks ago. I watched your video and was much relieved to see the handle was so easy to replace! Found an OEM, new, for a few bucks more than after-market, it arrived today, and...BOOM!!! 15 minute fix! FYI, the convertible has the aligning pin covering the top screw, took a T3(?) Torx to remove, but otherwise the same. Thank you for all the help! Great video!
I have done this several times. A few hints: 1. tape off around door handle opening. This will prevent scratching surrounding paint during installation. 2. Use a piece of rolled thin cardboard around socket to help prevent dropping screws inside of door panel. 3. An extending magnet retrevial tool is handy to manage removal of screws after loosening. 4 Carefully note placement of screws when removing or you may get confused during installation of new handle. Good luck!
Its really the little things that bring us joy haha. Thanks for the tutorial, mine just started doing this too and it’s annoying having to use the inside handle. Thankfully Nissan made it so you can roll the window down with the fob at least lol
This is gonna be my favorite channel just cause you dont see many people doing shit with the 350z and having one makes it nice to see what I can do. Like the hydro e brake
Thanks for this video bro. I just changed out both handles on my wife's 350Z. Without this video, I would have had to take it to the dealership to fix. You just saved me a lot of money. Also, Thanks for dropping that bolt because it made me super paranoid to NOT let that happen, therefore, I was really careful. Again, thanks very much.
This literally just happened to me like 2 days ago, ordered a pair that same day lol. I've only had a Z for about a month now and already having Z problems, oil consumption, grinding gears, hatch struts, HANDLES.😂
Just bought my 350z a week ago and have this problem with the passenger door side. Thank u so much for uploading this video when I replace it ill definitely use this to help!
@@Rich0712 yeah I used to do that with my nissan maxima as well... when cars completely dead tho , youll be screwed i had to go thru driver window n open hood then jumped car
@@shaa_boogZ yea that'll definitely warrant having to go through passenger side. Really like having the volt gauge as well as oil pressure and info cluster. Driver oriented car for sure.
I really enjoy holding the key fob down to lower the windows to open from the inside JUST like he did. I was wondering what the hell myself so thank you very much for explaining the issue.
Dude that's my car at the moment, I have to buy a door handle and I was most likely going to hire someone to install it but you make it so easy. I'm just going to do it myself. Thanks!
Incase you have a metal plate stopping access to the top 10mm nut, use a T35 bit to take them off first. I got the T35 3/4 socket head at home depot for ~$3
Thank You so much for posting this! My 2003 just came up with the same problem, urgh!, How frikkin aggravating! NISSAN Are YOU L I S T E N I N G? This morning I forgot. Stopped on my way to work for Coffee at a McDs. And out of Habit I put the windows Up . Came out and Ooops OS! Doors wouldn't open. No Key option on the Hatch or the Passenger Side either. At first I though I might have to break out the Drivers side Window. Lucky for me I was able to get the Hatch Back open with my KEY FOB and I actually had to climb in through the Back to open the doors from the inside. I'm 62! I sure a lot of people who saw me were laughing I did this too, I'll order a replacement handle and get to work this weekend.Great Video and THANKS again!
Can you believe the Nissan dealership wanted to charge me $600 for replacing both door handles? I ordered a pair thru Amazon for $107 and did it myself after watching this video. Took me less than 15 minutes to do it and saved me $500. Wow
Both driver and pass door handles quit working within a week. The only way I can get in is to hold the key fob unlock button until the windows go down so I can use the indoor handle. Thanks for this video and I will order new ones
Thanks for the great video. How did you get the screw that went to the bottom of the door? My 10mm socket went there. How do I get it back? Any suggestions?
Mine went out a few weeks ago so I've been holding the lock button down to roll the windows down so I can open it from the inside lol now I know how to fix it
At 4:35 when you started playing with the door.. How pissed would you of been if the handle broke again because you started playing with it? I'm asking because that happened to me with my s13 I installed a new handle and the I started playing with it like you were, it broke again.. I was fucking pissed lmfao😅🔫
+Wu- Tang Kinda why I started messing with it in the first place... Didn't want to fix it and then have it fall apart 20min later after putting everything away! haha Trust me, I was skeptical! But it made for some subtle humor in the end!
Happened to me but my passenger door handle, When i Tried to remove it the bottom bolt of the door handle just keeps spinning and will not break loose... Any suggestions on how to remove this bolt? I have the new door handle I just cant get the damn bolt to loosen. Just keeps spinning. Any help would be greatly appreciated!
i found a guy selling a Z and he said the passenger door doesn’t open from the outside. do you think i could do this to fix it? or would it depend? and also where did you get the extra handle from?
Any chance anyone knows how to open the door if neither handle is working? The only thing I can find out is to cut up the door panel lol and I really don't want to do that. I replaced both handles as both exterior handles were broken, and the passenger works fine, but the driver door is stuck locked. I think the locking rod slid out of the cylinder when I was reinstalling the door handle. PLEASE HELP LOL
I miss big Sean! One man can definitely change the world bro! You changed mine with this great video. I’m a software engineer, but getting into working on cars for fun. I bought a old 350z haha it’s low key a great car to learn on !! But having some issues with the car. Have you ever had some random coolant drip? No leak, because it’s so slow and random. I just smell the coolant super rarely, but honestly annoying haha any clue? Thanks
Coolant is leaking somewhere. Get a coolant pressure tester and pressurize the system to find the leak with the car off so it’s safe to look around. Most of the time coolant will vaporize off from the hot engine before you see it on the ground. I’d start with the heater core bleeder, any OEM plastic coolant pipes and the throttle body coolant lines. All of these seem to give issues eventually. Overheating is one of the few ways to kill a VQ.
I paid $350 to have mine replaced on one side only. And it just broke again, now both sides are broken. Just ordered me both handles frm amazon, hopefully I can change them myself
How much was the new handle? Mine just recently broke and Im thinking of getting a carbon fiber one. I was just wondering how much you got yours for?(i know yours isnt the carbon fiber one)
hey man just wanted to say i really like your videos i subscribed and liked a few i hope your channel takes off cuz it seems like you like doing this stuff and it aint easy (Beside the car fixing, video editing and etc.) but i was just wondering what paint are you using? is it plasti-dip? also, how do you like the 350z as a daily? Thanks for posting these videos bro imma be using them in the very near future!
+Kristopher Barwick Thank you! Doing everything myself can be a challenge, but I try to have fun! I think the 350Z is one of the most reliable 2 seaters for daily driving. Has a good level of creature comforts.
1:34 to avoid losing those bolts I used to use a piece of paper, at least shape it into a C or completely wrap your socket. As the bolt gets screwed out, you catch it with the paper. (Like a funnel) And it makes it an easy install of the new bolts. You should've titled this video "replacing 350z door handle" I was under the impression you somehow replaced the little plastic in the door handle. Lol this didn't fix the problem, I went through 3 outside door handles in my 3 years of owning a Z.
Hey! I had the door handle gremlin, happened about 3 weeks ago. I watched your video and was much relieved to see the handle was so easy to replace! Found an OEM, new, for a few bucks more than after-market, it arrived today, and...BOOM!!! 15 minute fix! FYI, the convertible has the aligning pin covering the top screw, took a T3(?) Torx to remove, but otherwise the same. Thank you for all the help! Great video!
Thanks for the tip homie, helped me out two years later lol
Thanks for the tip on convertible, bc mine just came up w. handle issue this week.
I don't own a Z but always stoked to see these how-to's. Maybe one day I'll have enough room in the garage for a Z
Thanks for this, out of pure laziness I’ve been opening my window to get in my Z for the past 2 months 😂
what im currently doing. 😂 Glad i wasnt alone.
Dude Same here
Same😭😂
yall need to get ur priorities straight.. how u that lazy?
Mine is on the passenger side, I just don’t drive anyone around. 😜
I have done this several times. A few hints: 1. tape off around door handle opening. This will prevent scratching surrounding paint during installation. 2. Use a piece of rolled thin cardboard around socket to help prevent dropping screws inside of door panel. 3. An extending magnet retrevial tool is handy to manage removal of screws after loosening. 4 Carefully note placement of screws when removing or you may get confused during installation of new handle. Good luck!
Its really the little things that bring us joy haha. Thanks for the tutorial, mine just started doing this too and it’s annoying having to use the inside handle. Thankfully Nissan made it so you can roll the window down with the fob at least lol
This is gonna be my favorite channel just cause you dont see many people doing shit with the 350z and having one makes it nice to see what I can do. Like the hydro e brake
"Metal piece rubbing against plastic peace equals Broken."😂
Thanks for this video bro. I just changed out both handles on my wife's 350Z. Without this video, I would have had to take it to the dealership to fix. You just saved me a lot of money. Also, Thanks for dropping that bolt because it made me super paranoid to NOT let that happen, therefore, I was really careful. Again, thanks very much.
You upload quality stuff. Your channel has a lot of potential!
I did the same thing when I fixed my door handle. open close open close I couldn't believe it. Good vid man
This literally just happened to me like 2 days ago, ordered a pair that same day lol. I've only had a Z for about a month now and already having Z problems, oil consumption, grinding gears, hatch struts, HANDLES.😂
Just bought my 350z a week ago and have this problem with the passenger door side. Thank u so much for uploading this video when I replace it ill definitely use this to help!
People look at me crazy when a 6'2 man has to go through the passenger side haha thanks for the vid
Sha B00gz seriously
Very tall here as well. Hold the unlock on the fob. Windows roll down for ya. Reach in and open. Gotta fix mine too. Lol
@@Rich0712 yeah I used to do that with my nissan maxima as well... when cars completely dead tho , youll be screwed i had to go thru driver window n open hood then jumped car
@@shaa_boogZ yea that'll definitely warrant having to go through passenger side. Really like having the volt gauge as well as oil pressure and info cluster. Driver oriented car for sure.
making up for loss door opening time
You need to upload more! I feel like This channel can grow so much
I really enjoy holding the key fob down to lower the windows to open from the inside JUST like he did. I was wondering what the hell myself so thank you very much for explaining the issue.
Dude that's my car at the moment, I have to buy a door handle and I was most likely going to hire someone to install it but you make it so easy. I'm just going to do it myself. Thanks!
Incase you have a metal plate stopping access to the top 10mm nut, use a T35 bit to take them off first. I got the T35 3/4 socket head at home depot for ~$3
Thank You so much for posting this! My 2003 just came up with the same problem, urgh!, How frikkin aggravating! NISSAN Are YOU L I S T E N I N G? This morning I forgot. Stopped on my way to work for Coffee at a McDs. And out of Habit I put the windows Up . Came out and Ooops OS! Doors wouldn't open. No Key option on the Hatch or the Passenger Side either. At first I though I might have to break out the Drivers side Window. Lucky for me I was able to get the Hatch Back open with my KEY FOB and I actually had to climb in through the Back to open the doors from the inside. I'm 62! I sure a lot of people who saw me were laughing I did this too, I'll order a replacement handle and get to work this weekend.Great Video and THANKS again!
Can you believe the Nissan dealership wanted to charge me $600 for replacing both door handles? I ordered a pair thru Amazon for $107 and did it myself after watching this video. Took me less than 15 minutes to do it and saved me $500. Wow
Both driver and pass door handles quit working within a week. The only way I can get in is to hold the key fob unlock button until the windows go down so I can use the indoor handle. Thanks for this video and I will order new ones
This song always makes me think of your videos, keep them coming!
Haha singing that song while listening to this and writing notes ! Thanks so much bro! Don’t this during the weekend
Ordered and installed. With a little fumbling it took about 45 minutes. Thanks!
Mine just broke, will be trying this soon! 04 roadster...off to look for a relacement thanks
Thanks for the great video. How did you get the screw that went to the bottom of the door? My 10mm socket went there. How do I get it back? Any suggestions?
Mine went out a few weeks ago so I've been holding the lock button down to roll the windows down so I can open it from the inside lol now I know how to fix it
It's so ridiculous that manufacturers uses little plastic pieces in high stress mechanical areas like door handles.
can you show me how to fix the cup holder on the passenger side
3:45 Well that's not helpful LMAO 🤣
At 4:35 when you started playing with the door.. How pissed would you of been if the handle broke again because you started playing with it? I'm asking because that happened to me with my s13 I installed a new handle and the I started playing with it like you were, it broke again.. I was fucking pissed lmfao😅🔫
+Wu- Tang Kinda why I started messing with it in the first place... Didn't want to fix it and then have it fall apart 20min later after putting everything away! haha Trust me, I was skeptical! But it made for some subtle humor in the end!
+PNWGarage lol
Thanks for the video, replaced both my handles on my 08 350Z works perfect!
Do you have a tutorial how to replace the two cables inside the door for the interior latch?
Is there anyway to open doors when battery is totally dead..
Mine doesn't open from the inside or outside... Always happens during cold weather
Hey bro, how much was the new door handle for the 350Z?
You probably could have used a magnet to get the bolt out
I did this and it still doesn’t open any suggestions
Mine locks when I happen to press the fob at same time, this fixed that issue?
Finally a decent video on this. Thanks man
Happened to me but my passenger door handle, When i Tried to remove it the bottom bolt of the door handle just keeps spinning and will not break loose... Any suggestions on how to remove this bolt? I have the new door handle I just cant get the damn bolt to loosen. Just keeps spinning. Any help would be greatly appreciated!
So is the door lock actuator included with the door handle?
Thanks for the video. I had to change the same handle on my Z today.
Can you do it with the window up though
Hey I see the bolt also has the shape to fit a Phillip screw driver in, can I use that instead?
I did the same but inside still won’t open.. only from the outside 👎🏼 lol
where can i buy a couple spare of those two 10mm bolts that u first took out of the door?
WormE any hardware store ever??? Even Walmart has them...
i found a guy selling a Z and he said the passenger door doesn’t open from the outside. do you think i could do this to fix it? or would it depend? and also where did you get the extra handle from?
Any chance anyone knows how to open the door if neither handle is working? The only thing I can find out is to cut up the door panel lol and I really don't want to do that. I replaced both handles as both exterior handles were broken, and the passenger works fine, but the driver door is stuck locked. I think the locking rod slid out of the cylinder when I was reinstalling the door handle. PLEASE HELP LOL
That happen to me but I didn't use my car for a month and the battery died and now I can't open the car?! Please help me !
I miss big Sean! One man can definitely change the world bro! You changed mine with this great video. I’m a software engineer, but getting into working on cars for fun. I bought a old 350z haha it’s low key a great car to learn on !! But having some issues with the car.
Have you ever had some random coolant drip? No leak, because it’s so slow and random. I just smell the coolant super rarely, but honestly annoying haha any clue? Thanks
Coolant is leaking somewhere. Get a coolant pressure tester and pressurize the system to find the leak with the car off so it’s safe to look around. Most of the time coolant will vaporize off from the hot engine before you see it on the ground. I’d start with the heater core bleeder, any OEM plastic coolant pipes and the throttle body coolant lines. All of these seem to give issues eventually. Overheating is one of the few ways to kill a VQ.
Where did you find the instrumental version I can't find it
So if my door handle doesn't work is this always the problem? Will I need to replace it for sure?
thanks, hope you're doing okay
I paid $350 to have mine replaced on one side only. And it just broke again, now both sides are broken. Just ordered me both handles frm amazon, hopefully I can change them myself
It's really easy! 15 minutes on the driver's side!
Where can I get the handle from ?
Northern Lights Auto Supply, on Ebay.
Dookies Daysofff just google it
For some reason the set up is different on the convertible and I can’t find anything 😡
Did you find anything? Mine is convertible.
nice videos man keep em coming !
did you disconnect the battery for that??
Nooooooooo........
I enjoyed your video, thank you, and explained very well. Had to subscribe.
What year is your z and would you recommend a z with just the regular vq35de rather than the rev up version? or should i go looking for the rev up?
If you can afford it go for the hr but if not go for the regular de and save some money for mods
+zephyr1237 I suggest the rev up/HR model. Its just better to have 20+ hp right off the bat, and it IS a noticeable difference.
+PNWGarage yea that is true I wish I could of gotten an hr instead
Had the same problem on the miata
My friend u just earn a subscriber quality video straight to the problem :) ty
I can't wait to fix my door handle!
How much was the new handle? Mine just recently broke and Im thinking of getting a carbon fiber one. I was just wondering how much you got yours for?(i know yours isnt the carbon fiber one)
+RaWrItzAlan Not sure where to get carbon fiber door handles, but Z1motorsports sells OEM doorhandles for around $80 shipped to you.
Okay, thank you.
hey man just wanted to say i really like your videos i subscribed and liked a few i hope your channel takes off cuz it seems like you like doing this stuff and it aint easy (Beside the car fixing, video editing and etc.) but i was just wondering what paint are you using? is it plasti-dip? also, how do you like the 350z as a daily? Thanks for posting these videos bro imma be using them in the very near future!
+Kristopher Barwick Thank you! Doing everything myself can be a challenge, but I try to have fun! I think the 350Z is one of the most reliable 2 seaters for daily driving. Has a good level of creature comforts.
thanks for the video! helped a ton!
DO NOT DROP THE BOLTS!!! Yes, ur pulling the whole panel off. It's not bad to pull it but it's a extra hour just to retrieve them from the bottom!
1:34 to avoid losing those bolts I used to use a piece of paper, at least shape it into a C or completely wrap your socket.
As the bolt gets screwed out, you catch it with the paper. (Like a funnel) And it makes it an easy install of the new bolts.
You should've titled this video "replacing 350z door handle"
I was under the impression you somehow replaced the little plastic in the door handle. Lol this didn't fix the problem, I went through 3 outside door handles in my 3 years of owning a Z.
Thanks for saving my ass (and a ton of cash) with this video!!!
Thank God for this video.
7,792 subscriber. Just keeping this comment here before you become HUGE. Great content
CNG (109) 😆 I'll put this in an interview when I'm HUGE! Thank you mang!
Stupid door handle broke 3 days ago lmaooo cars throwing u1000 code now to I love life 😅
Is the car wrapped? Why’s it white under there lmao
Bro no one shows how to get the pin back in, been trying to get this mf back on for an hour now
Nice video brotha
Sell me your 5th wheel if you ever feel the urge to let go of it
My shit did the same thing hahaI just left my shit and go through the window (convertible) haha
Had the same problem on my 350 same side and same broken piece.
Gracias amigo!!!!
Hahaha good video man!
Thank you !
dont break it allready !!!! hahaha
that bulbous protruberance that Nissan passed off as a door handle completely ruins the lines of the car.
I think it looks fine.
Youre the only one that thinks this
So, install new door handle... Didn't really need RUclips to figure that out 🙄
opening and closing the door like that made me hate this vid
LMAO
Do your self a favour and get a set of plastic spudger tools!!
Are you married? I'm in love with Z's. Fell in love when I was 18. I'm 50 now. 😬????????????
The hatchback will pop open by itself when the battery is low. Fyi
Security system issue
Potato
can you show me how to fix the cup holder on the passenger side