Garden hose rubber washers may also work. Don't put too many in, otherwise it may cause a small dent on the top of the hatch when you slam the hatch down too hard.
I’ve had my ‘05 Z for 15 years. You are definitely on point with those 5 replacements. Only one I haven’t had issues with has been the gauges. The one thing that has been an issue for YEARS and I’ve ignored has been the trunk release. Thanks for that tip as I will definitely take care of that nagging area. My wife 2nd biggest complaint next to being too low. Thanks Bro
You only need to replace the OEM popper with z1 version. That fixes the issue right away under 5 minutes and only half cost of the OEM ones which will stop working after few years
Currently, my 350z engine is blown, so that means it is build time! Newer videos are being edited and dropping soon. Thanks everyone for helping me get to 2,000+ subscribers!
You forgot the door handles will wear out too ! The mechanisms over time will break inside. A good hack remedy for the 350 Z is to insert the ignition key and, turn it to the left to lower the windows then, to the right to bring them back up.
Nicolas Keeton The trunk door fell down on mine and hit me in the head!! pissed me off!!😂not to mention the oil gauge pressure is stuck!😥 LMAO!! mine has the same dent as yours but on the passenger side!!
There's a window reset button for that issue. Motor obviously isn't broken or going out, just needs reset. Speedometer cluster is easy to remove, check the pigtail connector on the back to make sure it isn't loose.
Jesse M I'm pretty sure it does not eve require removing anything big. I was at work when my brother and dad decided to fix mine (I have a 2003 model) my brother described it as a sticker he peeled back and found the button to hold for the reset. I would have done it myself but again I was at work, I would suggest searching it, shouldn't be too hard to find PS the window acts like this when the car's battery dies or is disconnected, or when the motor really is starting to go bad
ruclips.net/video/71YInJ7WQFs/видео.html .I follow this steps and fix my pas. window. It did not work first time, but after several attempts it finally fixed. Don't need new motor and it' FREE
3 out of the 5 have gone bad on mine haha. The trunk springs, the hatch supports, and the splash guard underneath. So far I've never had a window motor, gauge, door handle, or camshaft position sensor go out on me. Currently 183k miles on my 03 350z; it still runs smooth and strong.
Engine blew up, so I'm currently building a electric 350z that also will be most technology advanced 350z with crazy torque. Check out my other videos.
this has gotta be one of the best vidoes ive seen on youtube in a long time haha. I cant pick out specifically why but the video was just great and fun to watch. Usually vidoes with a subject like this make me want to fall asllep.
Be careful what you replace the trunk struts with if they fail and cause the lid to drop. A lot of aftermarket trunk struts do not fit properly and when you close that rear deck, it won't sit down properly. It will close, but the front part will sit up about 1/4" higher then it should. I also put an Aluminum under tray on both my 350Z and my Infiniti Q60S. The one I put on has a great 12" x 12" port that drops so I can change the oil and filter without having to remove anymore then two screws. As for the engine, the water pump should be changed around 100K and there is a good chance if you live in a warm place like Florida, your AC pump will start becoming noisy at about 125K miles. Also the timing chain tensioner will start to wear causing an increase in that start up timing chain rattle. A short rattle is normal. But a loud slapping sound for several seconds spells impending failure. Another issue I see are the cooling fans at the radiator getting slow. This usually shows up first as an issue with the AC. The AC will stop blowing cool air when you are idling and stopped. When things get real bad, the engine will start to over heat when you are stopped and idling. Last, at around 100 - 120K you will need a clutch. Maybe sooner if you are a boy racer and ride the clutch a lot. Put the car into 6th at around 40 mph then give it full throttle. If the clutch slips you need to replace it.
Accurate....I had everything thing you listed break on mine except mine was the fuel guage. And the storage compartment above the radio broke on mine too lol
hey bro nice vid. I had the same problem with my window. once it was all the way up would roll down by itself or roll down when you closed the door. The regulator is operated by resistance so when you unplug the battery the windows lose the programing. what you do is take the door panel off and theres a rubber button that you have to press as you follow a sequence with the window switches. I fixed mine and didnt pay a dime on new motors.
If window rolls up all the way then drops back down- reset switch. If motor struggles to raise window or won't at all replace motor followed by reset switch.
LOL how i just finding this video.. the 5 things went out on my Z in the exact order you showed too.. except the window motors went out twice before the springs and struts for the trunk
Windows not going fully up can indicate the weatherstripping is out of place and not allowing the window to go where it’s supposed to so it goes back down.
That's funny, my 350z has all the exact same things broken (2003 Touring Edition). I also have a faulty Camshaft Sensor which turned my Z off when I was shifting gears and exiting the freeway. Could have been really bad!
hatch went before the driver window at 170,000 motor, shield went at 125,000, cause when they change the oil at Nissan they take of and the bolts broke. you are right things will go. I have owned a 280z 1979, 1986 300z, 1991 300z and the 350z. these are great cars and the 350 has held up the best thanks to technology
Oscar Avila I originally bought some online but after 2 weeks the trunk wouldn’t stay up in the cold. Then about 1 week after that the mount on the end of the strut broke. So this time I went to z1 motorsports and haven’t had issues since then related to it.
On convertables the 5th motor bow will go out but getting better quality & longer lasting ones will fix it to oem ones dont last very long but on my roadster i had both outside door handles break & passenger side needs to be still replaced & undershroud is broken but that z1 aluminum undershroud looks like a good buy
I see a lot of people say door handles.. I currently have 88k on my 03 and have yet to have a single issue with my door handles. my time must be coming soon? I've replaced the window motor driver side, and have a sticky oil pressure gauge, but that's not a big deal to me. I had the dreaded 3rd n 5th gear grind at 60k miles, installed a cd009 trans and it's been perfect since.
1) Window motors do go bad often on the 350z but when the window goes back down half way like that, the regulator just needs to be reset. Last week I replaced the passenger side window motor in my car and had to reset the regulator on the driver's side. My windows work great (for now). 2) The plastic sun visor clips/holders are super weak and will break constantly. I inherited my 350z and I have broken 3 clips so far just using the visor infrequently. Nissan knows that the plastic is defective but refuses to fix the problem. 3) The camshaft/crankshaft sensors will go out without warning. 4) If you have a convertible, then you know about the issues with the motors that open and close the ragtop. Consider yourself lucky if you don't have a convertible. The thing that I really like about the 350z is that it's a lot easier to work on than I thought it would be. So far, I haven't had to take the car to a mechanic. I was able to fix everything myself without too much difficulty. So far, I have replaced a window motor, all four brakes/rotors, an ignition coil pack, camshaft and crankshaft sensors, and the radiator cooling fan assembly. I also replaced the convertible top but that took me over 7 hours in the blistering sun so it was definitely a chore to complete. My car is a 2004, so it's getting old, but it only has 59K miles on it.
03 Z Owner here and I absolutely love mines despite the issues lol. Reading the comments I am now aware of the oil pressure sensor. She's down now due to mods. Right now my main issue is getting her to turn over.
My trunk struts were no good when I got the car they wouldn't even lift the boot you had to keep it held up the entire time. I just got mine regassed and the guy said the seal was great on them it's just because the car is over 10yrs old it had slowly lost gas over the years of use and the regas has kept them going strong since :)
Yeah, you'll still be able to drive, but it's best to get everything in advance just in case. Since most places charge a premium for parts unless you buy online
Great video! Love my Z. I have had two Z's and they are great sport cars for the money and lots of fun to drive. I now have a 2007 convertible. The driver's door latch broke (common issue) and the straps that pull the top down got weak and had to be replaced. Other than that, a great ride. 🙂
Everything but the undertray and guages are currently broken on my dads 03. Has both trunk problems and we had to replace the window motor on both sides. Also the clutch switch is sketchy and u might have to press in the clutch extra hard for the car to start
Since I bought my 2006 Roadster I've had the Radiator Fan go out, replaced with an aftermarket high performance one, Both door handles broke, Trunk open button stopped working, Seat belt airbag sensor went bad, and last but not least the Top wouldn't go all the way down- Replaced straps and fixed it, next thing I knew the back window was starting to separate from top.
That first example is not a broken window motor. Those motor have an anti pinch feature in them so if someone were to stick their arm out the window the window would shoot down. Thats why its called anti pinch. How you fix that is take the door apart, take the motor off the regulator and reconnect the switch to the motor. Hold the window switch up for 10 seconds and let go of the switch. Put the window back together and its fixed. Thats how i fixed mine.
Thanks for the video, I am looking to buy a 350z. What year would you recomend me in looking at? I am a bit confused what is in the second hand market. Thanks in advance
Guess I'm a little late, but if no one else can be bothered I might as well for whoever scrolls by. Purely intuitively I'd say go with whatever speaks to your heart the most, but if you don't care about that stuff or can't make up your mind you probably want the more recent ones starting from 2005 onwards as the most recalls have been made in 2003/04. I've had some inconclusive research on whether the '05 versions already had the improved engine components or just the 35th anniversary edition, the latest I found was '06 so if you want "more" (more is a very strong word for a 7.5% change in hp (280 to 301, although some argue about the measurements back then)) responsiveness and power go with that, additionally you get some fancy premium comfort stuff (especially with the actual premium edition). Things like heated side-view-mirrors to give you the basic gist of it. In '07 the 350z got another performance upgrade, similar in scale to the '05/06 upgrade, resulting in more hp and a wider power band (despite a minor peak torque drop). So if stock power is what you want go with that.
Ever get that digital display in? I'm curious to see what that would look like, I kinda want to do that to my z but I wanna see how it looks before I go spending money.
This list can also include door latches, interior paint, 1qt. of oil every 1k miles on 06', evap. emission vapor vent tube, etc. On the positive note Carlos Ghosn CEO of Nissan/Renault did earn $100 million with these cost cuts.
aye bro im looking to buy a 2005 350z enthusiast with 109k miles on it I was wondering what to expect other than the things stated here. Itll be used off the lot. Im just seeing if thisll be practical as a daily for a working college student. Thanks Big G
Nice vid boss, have had my 350z (2004) for about 2 months now and the only thing I’ve noticed is the service engine light comes on every few weeks. I just take it to a local autopart store and get code checked out and it’s nothing so I have them clear it. Wondering if you have heard of this occurring
Unfortunately if you have the convertible there are these bands that help the top fold correctly that will stretch over time and need replaced. Not an easy fix and I had Nissan do them. I had other issues as well but the tune to fix my top was 1500 dollars with labor included. They did warranty for 2 years which I thought was good. Hey.....it’s a convertible and it needs to work or why bother. I love my Z.
You forgot the door handles the damn door handles on the outside and inside will break i found around 100k miles they all just snap the plastic parts on the inside of them. Cost about 150 to replace the exterior ones and i fixed the inside ones for free on my last z with some plastic weld. Worked perfect looked stock
Hey Nicholas, I am planning to get one of this beauty soon. Mind if I ask if the engine is still working good considering it has been quite an old age car?
I loved your video. You seems like a very funny guy!. The window motor is a problem but you dont have to replaced the whole motor there is a small micro switch in the motor. Replaced that switch and all good. Cost me R50 in dollors its about 3.50 .
cool video bro its funny cause i just got a 04 z and in the same order these things are needing to be replaced!! keep up the content maybe some driving vids!!
"If one of my gauges mess up I just hit it" lmfao same here. My oil pressure gauge always goes to 0 and I have a mini heart attack. One of these days Ima hit it and it's just gonna stay there.
Kylen Collins if it does stay at zero dont let anyone tell you its your sensor. It is most likely your oil gallery gasket under the timing cover. The originals are made out of gd paper. I'll be replacing mine this week.
Worlds First electric 350z: ruclips.net/video/nOdChrZ1KlU/видео.html
I lost it when he slapped the gauge
Great solution to most of my 350z problems!
same haha
😂😂😂
That's what the technician did at Chernobyl, right before the reactor blew up.
Ditto 1 slap last for months to a year b4 you gotta slap it again lol
Damn I love this guys enthusiasm. Very enjoyable to watch lol
ruclips.net/video/sluNuVp2_TE/видео.html
Mechanic: it’s gonna be $120 to fix those trunk springs
This guy: 3 cents take it or leave it
I like to spend my money wisely with this car. haha
Garden hose rubber washers may also work.
Don't put too many in, otherwise it may cause a small dent on the top of the hatch when you slam the hatch down too hard.
“When the gauge stops working, I just hit it” 😂😭 good vid brotha!!!
Bruh😂😂😂😂😫
Smoky I’ve been using a pretty similar technique no problem
Same here in my maxima😭
I just subscribe because of that 🤣
I do this to my oil pressure gauge 😂
I dont know why but this dude needs to do more of these videos, he got the voice for it
More videos are coming!
My 2003 has had all of these things happen. I love my Z and I wont let go of it.
I’ve had my ‘05 Z for 15 years. You are definitely on point with those 5 replacements. Only one I haven’t had issues with has been the gauges. The one thing that has been an issue for YEARS and I’ve ignored has been the trunk release. Thanks for that tip as I will definitely take care of that nagging area. My wife 2nd biggest complaint next to being too low. Thanks Bro
You only need to replace the OEM popper with z1 version. That fixes the issue right away under 5 minutes and only half cost of the OEM ones which will stop working after few years
Currently, my 350z engine is blown, so that means it is build time! Newer videos are being edited and dropping soon. Thanks everyone for helping me get to 2,000+ subscribers!
Why did the engine blow?
@@THEADZBRADZ Not sure, I think it was from hole in driver side valve cover. Which led to oil starvation.
You forgot the door handles will wear out too ! The mechanisms over time will break inside.
A good hack remedy for the 350 Z is to insert the ignition key and, turn it to the left to lower the windows then, to the right to bring them back up.
Hit that subscribe button and help me reach 1,000 subscribers!
Dude, your video presence is amazing. Your a natural for film. Great Job man!!
Oil pressure and temperature gauge are pretty vital
almost 2000
Nicolas Keeton The trunk door fell down on mine and hit me in the head!! pissed me off!!😂not to mention the oil gauge pressure is stuck!😥 LMAO!! mine has the same dent as yours but on the passenger side!!
@@blackdaan 2k!!!!!
There's a window reset button for that issue. Motor obviously isn't broken or going out, just needs reset.
Speedometer cluster is easy to remove, check the pigtail connector on the back to make sure it isn't loose.
KaosTheory360 how do you reset it?
I reset my motor numerous times until the motor failed. Happened to me in my 2005 350z and 2003 350z(current)
Kaos is correct
Jesse M I'm pretty sure it does not eve require removing anything big. I was at work when my brother and dad decided to fix mine (I have a 2003 model) my brother described it as a sticker he peeled back and found the button to hold for the reset. I would have done it myself but again I was at work, I would suggest searching it, shouldn't be too hard to find
PS the window acts like this when the car's battery dies or is disconnected, or when the motor really is starting to go bad
ruclips.net/video/71YInJ7WQFs/видео.html
.I follow this steps and fix my pas. window. It did not work first time, but after several attempts it finally fixed. Don't need new motor and it' FREE
Don't stop making vids bro love your charisma
What
3 out of the 5 have gone bad on mine haha. The trunk springs, the hatch supports, and the splash guard underneath. So far I've never had a window motor, gauge, door handle, or camshaft position sensor go out on me. Currently 183k miles on my 03 350z; it still runs smooth and strong.
What oil do you use?
One more thing: the paint on the interior plastics
heard that
Amen to that one... The center part of the console especially that door
above the radio.
Don't forget about the paint around the window button. The worst.
I think thats a 2006+ issue
@@DansGlowing is it?
Engine blew up, so I'm currently building a electric 350z that also will be most technology advanced 350z with crazy torque. Check out my other videos.
Electric 350z is running! Few little things to fix and add them it’s time to hit the road!!
@@NicolasKeeton idk why but i love this lmaoo
should've put crank shaft sensor and cam shaft sensor.
Wars 909 dont forget the valve cover leak
Wars 909 what problems does that cause
RANDOM LIVESTREAMS it causes hesitation and trouble starting. So bad the car might stall while driving. Mine did
Wars 909 Only if your dumb enough to wash your engine bay with a garden hose 🤔
Eric F not even close..😂 it will cause a very slight oil leak so small u wouldnt even notice.. idk wth ur talking about bro
The Zspeed tray is a great part.
Spot On!!! I am a former 350Z owner and 4 of the 5 went out on me (everything except the gauges)! I miss my car. Might get another.
You forgot door handles 🤣🤣
I'm going to keep an eye out for my door handles
Damn .Z jyjùg...
.
cartrucktrunl.
n . ..
.......?..!$ñmmmvcg
fgffhfgyf6t lf vbnt5t223456uo9tut4uuthbgjghghfcfcgdgufn
ggggguggugjghjvjhjgjghhghjhjkjbhjhgggg
gffgguguhggdğfb yfhnjnhjthfhvjg gjfgjjgghvgcgjgfudyftdutugfuigfyhgufuhgufufuf7f7jgkhbgnhgyfguujgiiguffufjfuugyyyfuuufufgtjfjfuhgjjhbvjhbvcggchf
yhggujufhutkh
uhgbngkiugii fuyrufvjj..ik kehenatkaltuhgggjgc7ikhjv
Nicolas Keeton 🤙🏼
Yup, came here to say door handles.
My Z has the window issue, strut issue, and spring issue . He's not lying lol
this has gotta be one of the best vidoes ive seen on youtube in a long time haha. I cant pick out specifically why but the video was just great and fun to watch. Usually vidoes with a subject like this make me want to fall asllep.
Glad you enjoyed it!
Valve cover gaskets and spark plug tube seals will go out before 150k as well as the clutch and flywheel typically as well.
You’re so charismatic bro I hope you keep grinding RUclips
Hahaha, thanks!
5:07 im dying🤣🤣🤣
oh man, the percussive maintenance had me crackin up! don't forget all the parts that hold oil in your engine.
Be careful what you replace the trunk struts with if they fail and
cause the lid to drop. A lot of aftermarket trunk struts do not fit properly and
when you close that rear deck, it won't sit down properly. It will close,
but the front part will sit up about 1/4" higher then it should.
I also put an Aluminum under tray on both my 350Z and my
Infiniti Q60S. The one I put on has a great 12" x 12" port that drops
so I can change the oil and filter without having to remove anymore then two screws.
As for the engine, the water pump should be changed around 100K and
there is a good chance if you live in a warm place like Florida, your
AC pump will start becoming noisy at about 125K miles.
Also the timing chain tensioner will start to wear causing an increase in that
start up timing chain rattle. A short rattle is normal. But a loud slapping sound
for several seconds spells impending failure.
Another issue I see are the cooling fans at the radiator getting slow.
This usually shows up first as an issue with the AC. The AC will stop blowing cool
air when you are idling and stopped. When things get real bad, the engine
will start to over heat when you are stopped and idling.
Last, at around 100 - 120K you will need a clutch. Maybe sooner
if you are a boy racer and ride the clutch a lot. Put the car into 6th
at around 40 mph then give it full throttle. If the clutch slips you
need to replace it.
I recommend Z1, the pirce is higher but it's worth it
Accurate....I had everything thing you listed break on mine except mine was the fuel guage. And the storage compartment above the radio broke on mine too lol
There’s also the infamous buzz/rattle from cracked heat shields or exhaust components that drives you nuts
Is that what that rattle is? Im struggling trying to find it.
This is the most accurate video ever lmfao
hey bro nice vid. I had the same problem with my window. once it was all the way up would roll down by itself or roll down when you closed the door. The regulator is operated by resistance so when you unplug the battery the windows lose the programing. what you do is take the door panel off and theres a rubber button that you have to press as you follow a sequence with the window switches. I fixed mine and didnt pay a dime on new motors.
Mine kept losing the adjustment then the motor failed. Happened on both doors.
If window rolls up all the way then drops back down- reset switch. If motor struggles to raise window or won't at all replace motor followed by reset switch.
I can tell your a real humble gentleman just by the way you Grandma. Great video! Informative and FUNNY!!!
Preaching the Truth!!!👍🏼
Side Note - Links to New Part Purchases is always helpful.
Reverend G thanks I never got around to it. I’ll do it soon
LOL how i just finding this video.. the 5 things went out on my Z in the exact order you showed too.. except the window motors went out twice before the springs and struts for the trunk
This is the best video I’ve ever seen
Thank you for the video. For myself, these minor issues won't stop me from buying a 07/08 350Z.
Thank you for diagnosing my trunk not always opening
No problem, don’t forget to subscribe!
Windows not going fully up can indicate the weatherstripping is out of place and not allowing the window to go where it’s supposed to so it goes back down.
Hands Down a great informative video owned my 350Z since new 03 and had these issues ..
besides the gauges ...banging is not suggested ....
Just got a Z, and everything you said was spot on 🤣
That's funny, my 350z has all the exact same things broken (2003 Touring Edition). I also have a faulty Camshaft Sensor which turned my Z off when I was shifting gears and exiting the freeway. Could have been really bad!
Rob K My G35 had the same problem but at an intersection it was pretty bad aha
my 03 also had that. it was a recall
You are the man! You have a charisma for these type of videos!
hatch went before the driver window at 170,000 motor, shield went at 125,000, cause when they change the oil at Nissan they take of and the bolts broke. you are right things will go. I have owned a 280z 1979, 1986 300z, 1991 300z and the 350z. these are great cars and the 350 has held up the best thanks to technology
Lookin at an 06 tomorrow. Thanks so much for the tips!
Did you buy it? How is it?
Yep, pretty accurate. The first 4 went out on mine around 50k miles. Now the transmission synchros are starting to go at only 60k...
i like your fix for the trunk lift lol. Thats brilliant 👌 6 pennies vs 120 bucks. Well played!
Trunk struts I bought on Amazon for 20ish dollars and they work awesome
Oscar Avila I originally bought some online but after 2 weeks the trunk wouldn’t stay up in the cold. Then about 1 week after that the mount on the end of the strut broke. So this time I went to z1 motorsports and haven’t had issues since then related to it.
Nicolas Keeton I was afraid of that too but I had mine for 2 months and still no issues
rear hatch spring hack works great,just did mine
As a Z owner I agree with you 95% haven't had any gauge issues so far on my 03 though, also camshaft position and knock sensors are common
Cam sensor will be added to the list
Replacing my window motor this weekend! Sick of hitting my door panel for it to work 😂
Comment how it goes!
On convertables the 5th motor bow will go out but getting better quality & longer lasting ones will fix it to oem ones dont last very long but on my roadster i had both outside door handles break & passenger side needs to be still replaced & undershroud is broken but that z1 aluminum undershroud looks like a good buy
added to my "Possible Future Help" playlist
Dont own a car yet but 350z prob gonna be my first car
Try to get one while you can, because prices are going up
I see a lot of people say door handles.. I currently have 88k on my 03 and have yet to have a single issue with my door handles. my time must be coming soon? I've replaced the window motor driver side, and have a sticky oil pressure gauge, but that's not a big deal to me. I had the dreaded 3rd n 5th gear grind at 60k miles, installed a cd009 trans and it's been perfect since.
1) Window motors do go bad often on the 350z but when the window goes back down half way like that, the regulator just needs to be reset. Last week I replaced the passenger side window motor in my car and had to reset the regulator on the driver's side. My windows work great (for now).
2) The plastic sun visor clips/holders are super weak and will break constantly. I inherited my 350z and I have broken 3 clips so far just using the visor infrequently. Nissan knows that the plastic is defective but refuses to fix the problem.
3) The camshaft/crankshaft sensors will go out without warning.
4) If you have a convertible, then you know about the issues with the motors that open and close the ragtop. Consider yourself lucky if you don't have a convertible.
The thing that I really like about the 350z is that it's a lot easier to work on than I thought it would be. So far, I haven't had to take the car to a mechanic. I was able to fix everything myself without too much difficulty. So far, I have replaced a window motor, all four brakes/rotors, an ignition coil pack, camshaft and crankshaft sensors, and the radiator cooling fan assembly. I also replaced the convertible top but that took me over 7 hours in the blistering sun so it was definitely a chore to complete. My car is a 2004, so it's getting old, but it only has 59K miles on it.
Most Helpful and to the point video on this website !!
dude you are a fucking genius I love that trunk spring fix
03 Z Owner here and I absolutely love mines despite the issues lol. Reading the comments I am now aware of the oil pressure sensor. She's down now due to mods. Right now my main issue is getting her to turn over.
Kedrian Cooper if gauge is sitting at 0 its your oil gallery gaskets. If its holding at 120 its the sensor
@@derekbarnes1472 yeah, it's time for a good motor build. Head gaskets coming soon.
bro i have all these issues except for the last one so far lol and i got 28k miles on a 2003 350z. ur one funny dude good stuff!
Bro literally the first 3 things are currently broken on my daily Z lmfaoo, so true
My trunk struts were no good when I got the car they wouldn't even lift the boot you had to keep it held up the entire time. I just got mine regassed and the guy said the seal was great on them it's just because the car is over 10yrs old it had slowly lost gas over the years of use and the regas has kept them going strong since :)
Great video. If I may add also the tire pressure sensors
It’s not a broken window motor. It’s just a limit switch that needs adjustment. There is a you tube video on how to do that....and it works!
Mojo DeCat not all have the reset switch.
I was scared to watch this video. pleased to hear the common problem areas won't affect my ability to drive the car. thanks for the video.
Yeah, you'll still be able to drive, but it's best to get everything in advance just in case. Since most places charge a premium for parts unless you buy online
Steering wheel wrap is nice
SO true,LOL, my 2008 350z replaced the trunk struts after it came down on my head lol, oil guage is out, passenger door handle stuck.
Great video! Love my Z. I have had two Z's and they are great sport cars for the money and lots of fun to drive. I now have a 2007 convertible. The driver's door latch broke (common issue) and the straps that pull the top down got weak and had to be replaced. Other than that, a great ride. 🙂
Everything but the undertray and guages are currently broken on my dads 03. Has both trunk problems and we had to replace the window motor on both sides. Also the clutch switch is sketchy and u might have to press in the clutch extra hard for the car to start
Since I bought my 2006 Roadster I've had the Radiator Fan go out, replaced with an aftermarket high performance one, Both door handles broke, Trunk open button stopped working, Seat belt airbag sensor went bad, and last but not least the Top wouldn't go all the way down- Replaced straps and fixed it, next thing I knew the back window was starting to separate from top.
preciate u bruh , i’m looking to cop a 350 z rn , thanks for the tips
no problem!
Ive replaced all the things you talked about.... i appreciate the trunk H@cK .il try the three penny.
That first example is not a broken window motor. Those motor have an anti pinch feature in them so if someone were to stick their arm out the window the window would shoot down. Thats why its called anti pinch. How you fix that is take the door apart, take the motor off the regulator and reconnect the switch to the motor. Hold the window switch up for 10 seconds and let go of the switch. Put the window back together and its fixed. Thats how i fixed mine.
Nice video!
Thanks!!!!
Thanks for the video, I am looking to buy a 350z. What year would you recomend me in looking at? I am a bit confused what is in the second hand market.
Thanks in advance
Guess I'm a little late, but if no one else can be bothered I might as well for whoever scrolls by.
Purely intuitively I'd say go with whatever speaks to your heart the most, but if you don't care about that stuff or can't make up your mind you probably want the more recent ones starting from 2005 onwards as the most recalls have been made in 2003/04.
I've had some inconclusive research on whether the '05 versions already had the improved engine components or just the 35th anniversary edition, the latest I found was '06 so if you want "more" (more is a very strong word for a 7.5% change in hp (280 to 301, although some argue about the measurements back then)) responsiveness and power go with that, additionally you get some fancy premium comfort stuff (especially with the actual premium edition). Things like heated side-view-mirrors to give you the basic gist of it.
In '07 the 350z got another performance upgrade, similar in scale to the '05/06 upgrade, resulting in more hp and a wider power band (despite a minor peak torque drop). So if stock power is what you want go with that.
Ever get that digital display in? I'm curious to see what that would look like, I kinda want to do that to my z but I wanna see how it looks before I go spending money.
This list can also include door latches, interior paint, 1qt. of oil every 1k miles on 06', evap. emission vapor vent tube, etc. On the positive note Carlos Ghosn CEO of Nissan/Renault did earn $100 million with these cost cuts.
Forgot to mention the Cam shaft sensor, door handles and brake switch light! Good video though
Also the Front lower control arm bushings
aye bro im looking to buy a 2005 350z enthusiast with 109k miles on it I was wondering what to expect other than the things stated here. Itll be used off the lot. Im just seeing if thisll be practical as a daily for a working college student. Thanks Big G
Nice vid boss, have had my 350z (2004) for about 2 months now and the only thing I’ve noticed is the service engine light comes on every few weeks. I just take it to a local autopart store and get code checked out and it’s nothing so I have them clear it. Wondering if you have heard of this occurring
“And outta nowhere, *CHA*, knocked out by the trunk”
Buying one soon an definitely putting a 12inch sub in side
"Trunk just knocked you out" lol
I was set up to buy one at a dealership then my country went on lockdown I cant wait till this pandemic blows over.
Buy one second hand. I've seen some good deals. Like $3-4k, clean title
Unfortunately if you have the convertible there are these bands that help the top fold correctly that will stretch over time and need replaced. Not an easy fix and I had Nissan do them. I had other issues as well but the tune to fix my top was 1500 dollars with labor included. They did warranty for 2 years which I thought was good. Hey.....it’s a convertible and it needs to work or why bother. I love my Z.
Dude you hit everything perfect!
You forgot the door handles the damn door handles on the outside and inside will break i found around 100k miles they all just snap the plastic parts on the inside of them. Cost about 150 to replace the exterior ones and i fixed the inside ones for free on my last z with some plastic weld. Worked perfect looked stock
Hey Nicholas, I am planning to get one of this beauty soon. Mind if I ask if the engine is still working good considering it has been quite an old age car?
Stonny my engine died at 193k miles and I abused the car a lot. So I thinks it’s a pretty good car.
1:33 that sound. It's hurt me 😭😂
There is a button under the door lining on the window motor. You need to reset the window with that button its under a sticker .
Smacking electronics always fix things 😂
Thanks alot man. Im about to buy one so this is really helpful. Like!
Everything here. So. True. Sweet vid man!
Thanks!
Too funny and spot on! Might want to add that dumbass cup holder (03 350z) and the fuel level sensors going to empty at 300 miles...
I loved your video. You seems like a very funny guy!. The window motor is a problem but you dont have to replaced the whole motor there is a small micro switch in the motor. Replaced that switch and all good. Cost me R50 in dollors its about 3.50 .
nice video! however, you forgot the door handles. Those break a lot
cool video bro its funny cause i just got a 04 z and in the same order these things are needing to be replaced!! keep up the content maybe some driving vids!!
This video made me subscribe bro, good vibes and funny bro😂😂 i lost it on that slap
Is the aluminum cover heavier or lighter than the original plastic one?
I think slightly heavier, but it's definitely worth it!
What is the name of the odometer side switches because I need a replacement
"If one of my gauges mess up I just hit it" lmfao same here. My oil pressure gauge always goes to 0 and I have a mini heart attack. One of these days Ima hit it and it's just gonna stay there.
Kylen Collins if it does stay at zero dont let anyone tell you its your sensor. It is most likely your oil gallery gasket under the timing cover. The originals are made out of gd paper. I'll be replacing mine this week.
This video is so accurate! Relatable on so many levels.
This was one of the most entertaining videos I’ve ever seen. Lol