How To Replace Rear Coil Springs Toyota 4Runner 1998

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 45

  • @shonuffisthemaster
    @shonuffisthemaster 3 года назад +8

    the instruction was good, but your mannerisms are what really made me love the video lol!

  • @echosierraenroute
    @echosierraenroute  2 года назад +9

    UPDATE 11/16/2021
    THESE SPRINGS WERE GREAT FOR LESS THAN A YEAR AND MAYBE 8000 MILES BUT THEY ARE ALREADY VERY SAGGED AND HAVE VERY LITTLE LIFE AND REBOUND. SUPER UPSETTING.

    • @Danomega1
      @Danomega1 2 года назад

      Were these Moog 81043? My shit did the same thing.

    • @echosierraenroute
      @echosierraenroute  2 года назад +4

      @@Danomega1 yeah man, total shit metal sadly. i replaced them with these OME ones which i really like so far after 2000miles.
      great height and repsponse. they seem rly good.
      www.amazon.com/gp/product/B00SQFXVSO/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

    • @Danomega1
      @Danomega1 2 года назад

      @@echosierraenroute I just got a pair OME 891 ready to install, so we'll see!

    • @echosierraenroute
      @echosierraenroute  2 года назад

      @@Danomega1 good luck

    • @chofyam3466
      @chofyam3466 2 года назад +2

      I got OEM for that reason. Many amazon reviews said that.

  • @asablack1364
    @asablack1364 3 года назад +4

    Great video. I was going to have the local tire shop do it, but not anymore. Thanks

  • @patrickmcmurray9446
    @patrickmcmurray9446 3 года назад +3

    "Schock" on springs! Humor and common sense included. Thanks Evan

  • @liamalexanderlll
    @liamalexanderlll 3 месяца назад +1

    Thank you very much, this video helped me a lot.

  • @dauntewimbush1939
    @dauntewimbush1939 3 месяца назад +1

    Thanks for the video dude

  • @dkemp1337
    @dkemp1337 3 года назад +1

    I just put new front struts on my wife’s 4Runner (96 2wd) and it looks like it has the Carolina squat and so now I’m here lmao

    • @echosierraenroute
      @echosierraenroute  3 года назад

      Nice. Struts up front (with coils pre installed) is a nice easy job . This has a few extra steps but not bad.
      Don’t forget torque specs

  • @richardjohnson9275
    @richardjohnson9275 Год назад +1

    Hey thanks man this is a great video!

  • @louietabullo208
    @louietabullo208 3 года назад +2

    Good info, you're views will be going up soon

  • @bo007duke4
    @bo007duke4 3 года назад +1

    Nice bro! Super good vid! Thanks heaps 🤙🏼

  • @chanceruberg1321
    @chanceruberg1321 3 года назад +3

    "Put your fucking ass on here "lol

  • @mr.bruceknight9126
    @mr.bruceknight9126 Год назад +1

    Did you replace the Moog Coils? If so, which ones did you replace with? What do you recommend for a 1996 4runner 2wd 3rd gen? thank you!

    • @echosierraenroute
      @echosierraenroute  Год назад

      i did, they were quite bad after less than a year. i went with the OME 906. great height, about 2" higher than stock, they are a bit stiff however.

  • @Dubnot
    @Dubnot 3 года назад +1

    That's it..just super chill 😂

  • @rykerhayward8606
    @rykerhayward8606 3 года назад +2

    Just an observation. Couldn’t you use a spring compressor to make coil installation a little easier?

    • @echosierraenroute
      @echosierraenroute  3 года назад +3

      Yea but be a man.
      But actually these barely need compressing to make it in, they are free standing springs where springs on a loaded strut tower need extreme compression to fit in, and that is dangerous work doing that.

  • @crossroadsheavener7599
    @crossroadsheavener7599 3 года назад +1

    Are these Moog 81041, for 15" or 16" rims, or does it matter? Great video, thanks

    • @echosierraenroute
      @echosierraenroute  3 года назад

      I wouldn’t think there is a difference between the two wheel sizes, this 4runner has 16” wheels
      Good luck

  • @borp6912
    @borp6912 3 года назад +2

    How are the Moogs treating you so far?

    • @echosierraenroute
      @echosierraenroute  3 года назад +3

      i actually really like them, after about 8000 miles im still sitting where i was when they were new. They have a great ride height look and feel. amazingly they were $50 on amazon.

    • @echosierraenroute
      @echosierraenroute  2 года назад +5

      UPDATE THEY ARE TRASH AFTER 16 MONTHS, SAGGED LOW AND NO LIFE

  • @krym861
    @krym861 2 года назад

    Didn't disconnect the tracbar? Wouldn't that put more tension on the other side doing that w the bottle jack? But it is rough to have to do all that other work around w the trackbar so I get it 😂

    • @echosierraenroute
      @echosierraenroute  2 года назад

      Trackbar? Do you mean sway bar? I removed that.
      Not sure what you mean.

  • @brizzx32
    @brizzx32 Год назад +2

    What? Where is the final walk around?

  • @jasonmack7098
    @jasonmack7098 3 года назад +2

    Idk if I’m just missing something but wouldn’t it have been easier to use spring compressors instead of undoing all that stuff? Not that the way you did it looked hard was just wondering if there is a reason you didn’t use a spring compressor and just compress the spring and pull it out 🤷🏻‍♂️

    • @anthonygonzalez9422
      @anthonygonzalez9422 2 года назад +1

      I've never seen this done on any car. Getting the compressors in that space, properly seated and secured, and then getting your impact gun/ratchet in there to activate them is damn near impossible. Just not enough space. Putting weight on the axle is the easiest way.