17:29 If you can't get the tie rod castle nut to tighten because it just keeps spinning, you can use a pry bar and pry up on it to add tension to it. Pry between the lower balljoin and tie rod. That will allow you to tighten the nut.
I don't even own a 4runner and I watched the entire video because you are so thorough and very good at explaining what's important. Excellent editing also.
@@mikechalette886 if you just jack up the front end and jerk the tire around side to side, and up and down, you will notice if the ball joints are worn out.
Dude, you are helping me incredibly with my two 4runners. But I'm not gonna lie, you crack me up wearing no shoes working on trucks! Keep up the great vids. You're a fabulous teacher.
This kit saved me more then $30... the canadian dealership was quoting EACH lower ball joint at $250 (before tax), luckily I saw this video and gave the kit Part number and it cost $200 (before tax) for the kit. Thank you!
This was an amazing video. Thorough, detailed, great video angles. No idea why someone gave a thumbs down. I’d love to see what kind of video is acceptable for them. Thanks so much for taking the time and the energy to film and share this. I just worked on my car today, and I know filming it would just have drug out the process, and that’s not even ensuring I had great camera angles, adjusting the camera, explaining stuff, and then editing the video on top of all that. Thanks again - a lot!
This is a great tutorial. I like how you are pragmatic about what the manual says, and what most people actually do. With the right tools (23mm and 33mm ball joint press, breaker bar, cotter pin puller) the job takes about an hour per side and is no more complicated than changing brake pads and discs.
I’m an old lady and could care less about car repairs. But…buying a used 2000 for a son so I started to watch your channel. And my other son is a mechanic. You are amazing how you present these problems and repairs. Very interesting! Well, I’m hooked now. Crazy!
Coincidentally; this was one of the first updates I made on my 99 4Runner. Besides changing the oil, I also replaced the manual and transfer case oil with Redline's MT-90, because it's GL-4 rating, making it safe for the brass rings in the 5 speed. I also did the rear diff with Lucas full synthetic 75w-90 because of better cooling properties. I changed all the drain plugs with GoldPlugs; made in U.S.A. mainly for the stronger magnet! I did order the lower ball joints from McGeorge Toyota in Virginia. Great prices from a dealership! I had no idea there was a recall kit! The main reason for going with genuine Toyota ball joints was that mine were the original at 328,000 original miles! This is why the factory parts may hands down be the safest bet, if you want to be as safe as possible. Thank you for this important information! I also ordered the 8 flange bolts and used the blue Locktite as a standard! Take good care brother! ❤🌄
@@PhoRunner Went and looked at my 2004 Sequoia owners manual. It says "Rear Differential 75w140 synthetic" Don't feel crazy now. The front it lists as 75w90...but I don't wave 4wd so that doesn't matter to me.
Thank you for this video! Doing my surf soon! Anyone wondering if these are the same part numbers for a 3rd gen Toyota Surf (KZN185)…the answer is yes. 😊
2002 4wd LTD. 322,xxx miles, second owner since January 2013 and 144,xxx miles. Everything looks original under there now. Replacing upper and lower control arms, and sway bar bushings along with ball joints next week. Great vid, great editing. Keep up the PhoRunner content!
Yup.. this is the very first thing I replaced on mine after getting the car, and of course they were replaced with OEM Toyota ones. You can save a good 15-20% off if you buy OEM parts online. Way worth it!
@@PhoRunner Great video by the way, an A MUST service to avoid catastrophic failure. I read in the forums if the car is post ‘00, there’s actually a service bulletin where the Toyota dealer will do it for free.
@@PhoRunner Yes you did 👍🏻 I missed that part, sorry about that. Fantastic work covering this repair completely. This is off topic, but I was wondering if your Climate Control Module (CCU) has ever failed. Mine is acting all crazy. I cannot turn off the A/C and only a couple of buttons on it work/do most of the functions. Maybe you could do a video on this? 😁
Excellent video! I plan on doing this job for my 4Runner. I paid $429 in parts out the door from Toyota. Using the recall kit, crown boots, and 8 bolts(recommended ones). I was going to buy the Toyota sway links but they were ridiculously expensive. Maybe another time. Thanks again!
got my ball joints replaced at 90k. and I will do it inline with water pump/ radiator replacements. doing everything together makes the car feel much newer.
I'm getting ready to do this and a bunch of other front end work including replacing the control arms. I just want to clarify, I don't need a ball joint press? This video is incredibly informative, thank you so much for making it!
Had this happen twice while driving. Thank God I was going slow both times! Once the ball joint breaks its game over , you're stranded cause the freaking tire comes off the car! Good video. Thanks for torque specs
I was never aware of this issue until it happened to me in my 97 Tacoma. Just turned into a parking lot and Thump. I also have a 97 4Runner and my wife drives a 2000 4Runner. I guess I’m going to do this repair on two more vehicles.
I did these a few months back on my 97 4runner and fixed everything, didn’t think I could tackled before the video but it was easy! I need to do the same thing on my 98 Tacoma, LBJs look identical so I was thinking of just ordering from McGeorge again…if they don’t work I’ll just have a spare set for the runner lol but I’m 99% sure they’re identical
If I recall correctly, the Tacoma has a different part number! The tie rods won’t fit if you order 4runner parts. Outside that, should be similar repair.
Awesome video as usual! Just swapped mine out over the weekend but then discovered my outer tie rod boots were torn. New project and waiting for parts….
Best video I've seen in a while. Love it when you tell us what size sockets and wrench to bring before we get down on the ground. Gotta say that hand in the pinch point at 14:57 had me on edge......Mine is a 2001 Extracab TRD Tacoma, bought new, 255,000 miles. No rust, original alternator (did change the brushs but they were still long). I was looking how to check the ball joints, thx.
I probably could have secured that better lol. I try to lay out the tools since I hate not having everything I need before starting a job. Fun tidbit: I usually shoot that scene after the job is done. :)
I have a 02 Tacoma with 300k miles I’m the 3rd owner and don’t know the history of the truck. It drives great but for no more than that it costs I think I’ll replace the lbjs just because. I’ve changed all the oils and other maintenance so I’ll be happy to do this job.
great job on this video…own a 2006 4runner… this video is what i was looking for instructions with good video to follow… your tips along the way explaining good and bad options … are clear for owners to choose their presence👍🏻👍🏻👍🏻
Thanks for this thorough how-to. After watching another video about the OEM bolts (both the original "green" and updated "red" were included in the testing) I went with ARP 35mm bolts (673-1004).
Just had a passenger side fail 2000 SR5 4Runner 248,000+miles. Think they were the original. Bought Mooge replacements. 4 bolts 1 Castle nut 1 pin for castle nut And red locktight. Some scuff marks on inside of wheel. Pulled forward about 4-5ft and loud noise. Got out and seen my wheel turned slightly Fun lol
Moog isn't what they were three decades ago. All made in china with questionable quality. You should redo it soon with OEM. Not worth your life and limb trying to save a few dollars.
@@Nessal83 Already installed. Usually I would get oem parts but I needed it fixed then not days later. Probably going to get the oem lowers and uppers when I order the oem rear passenger seatbelt as it is not retracting all the time. You are correct though, cheap parts are exelent for on the fly fixes but not long term solutions. Don't get me wrong I'm not against cheap parts just the ones that I don't have to risk my life with lol
@@frankdelucey2137 yeah totally agree. Certain parts like this where quality is all over the place and for such a critical part, I only go OEM. But if it's rotors and pads or stuff like that, I go with a good aftermarket brand. Wish you the best.
I had just done the passenger side of my 99 Tacoma and pretty much did it the same way, I was hoping that you were going to give the torque specs. They looked like the exact parts but didn't verify, I had heard the 1st gen Tacomas had a lower ball joint recall also. I have 140k miles and very slight play on the passenger side but of coarse I'm going to change the driver side also. Didn't know they had a kit so had bought them separately. Thanks for the specs. and thought it was a great video.
The moog 555 greasable lower ball joints work extremely well been using 1 set on each if my rigs for 5 plus years now I grease then after every oil change
Check that the Moog LBJs you get have the 555 mark and look like the set in this video. Moog also ships non-555 LBJs but the castings look like crap and have a domed cover on the bottom side (the one shown in this video have a flat cover).
same here - gonna get this done on my 2004 Taco now. Notice on your Taco (if it's like mine), there is a squarish rubber boot cover over the LBJ. I was comparing with my 4Runner and thought that was interesting that aren't on those for some reason.
Thank you for this video. I don’t have the tools for the job, but I got the recall kit part number I didn’t know about! Saved a few bucks. Those 30 something dollars is alot for me at the moment. And the part numbers you gave saved me some time. Thank you for the video and detailed description!!!
The pictures to scare us into getting our priorities straight on our 4runner is so right dude haha. Pay the 200 bucks now to avoid several thousands in damage, and the price for OEMs we can get for far less than the dealership would sell them. When the shop gets done putting on my UCAs, I'm going to order my LBJs
Hey, thank you for the video. I was wondering if that recall kit works on the prado 90 series and did that kit settle the problem of ball joint total failure causing wheel to collapsing
Im getting a "click" from both front wheels when I go over speed bumps in my 97 SR5 5 speed (for over 2 years). Checked the suspension and everything looked good. Except there was a little bit of movement in the LBJ on both sides. Parts ordered from McGeorge. Going to install soon for a trip up to Trinity. Thanks for the great Video!
Very nice as always man. I learn something in this one. Never knew they had a special tool to separate the ball-joint. I always use the sledge hammer 🔨. Great job my Friend.
Top notch info. Thank you for your effort in putting this all together. I have a 2000 4x4 most likely on the originals. Any idea why mine would not be on the recall list as well?
@@PhoRunner swapping out a front axle....just like this vid....but out on the trail....bush mechanic style. I've only seen a couple videos....but they not good like yours
Great video(s) brother. I have a 2001 4runner that I picked up and have been watching a lot of your videos on getting it in top shape. Appreciate it! Keep it up.
I cannot believe none of these Toyota sites will let me look up a lower ball joint assembly for a 2007 4Runner. All I can get is the ball joint attachment without a ball joint! It's CRAZY!! Going to my local Toyota dealer tomorrow and blow his mind, because I have already been on their site as well.
@@PhoRunner Got a question for ya. Ever seen a front axle that binds up and causes vibration, and it's not the cv axle? Seems like it's coming from the transfer case. All my tie rods and ball joints check good, and replaced the axles and hub bearings about a year ago. Not looking good for me so far.
@@PhoRunner It was the CV axle. as soon as I removed it from the hub and bearing assy, it popped, and spun freely. I'm replacing it with an OEM axle, much beefier than the other one I had in from a few years ago, also installing diff and sway bar spacers and upper A arm to offset the bind the lift puts the front end into. The upper A arms will make for a better alignment also. Thanks for your time!
It happened to me (974R 2.7 3rz 2wd Manual Tran 450k miles). I had taken it to Sears for a battery test/warranty, when the tech pulled out of the garage and turned down a bank/steep driveway the drivers side ball joint came apart. Luckily he was going slow and only my fender got very slightly bent upward. I tried to get Seats to compensate but they didn’t of course. Replaced it but can’t remember if I did the other side too. I dig your videos.
Is this process the same with a 96 tacoma 4x4? Got all OEM upper and lower ball joints and some inner and outer tie rods with the sway bar links and struts. Whole shabang and learning on the spot haha. This gives me the boost of confidence I need.
03 Tacoma PreRunner..Just replaced my lower ball joints with OEM , I used the 10933 bolts at 37 pounds , but I’m kinda thinking of switching them to the 10066 flange bolts, would y’all recommend that ? And does it matter if I have the ball joint protector/cover that some tacomas have
I'm not sure how address teh cabin noise or dashboard noise. Perhaps some old clips?? I used to have this crazy squeak in my 4runner too but it seems to have disappeared lol. Maybe all the bushing replacements soften up the ride :)
It's not that the balljoint is designed horribly. It is the design of the suspension that keeps the balljoint in constant tension and it's being pulled apart. You can see that the following gen fixed the design issue.
I just wanted to throw this out there to help someone out. I kept the castle nut on there, and when I separated the ball joint from the tie rod it hit the castle nut so hard it ended up mangling both the nut and threading. I think it was because I didn't screw it on enough. Just be sure to screw it in some if you decide to keep it on.
i have a 02 4runner, would it be better to go with the flanged bolt instead of the one with the washer because the flanged bolt has a higher torque spec?
I plan on following this video to swap out my LBJs, but I was wondering if there was any other maintenance you recommend me taking care of while I'm doing this
Id just do these and save up for the rest or do it all at once since it will require an alignment. You can get away with this one without an alignment as it doesn’t touch alignment adjustments.
THanks for the video. Planing on replacing the upper and lower ball joints. Is there a preference ont he order. Lower first or upper first. Does it matter? Thanks
Quick question for you, do you think the recall kit would be fine on other year 3rd gens? Mine is a 97 and although the recall was just for the 2000s, all my research on OEM LBJ for the 96-02 shows they are identical. If I'm not mistaking, the recall kit would be the same exact LBJ as previous years...would it not? I need to replace mine asap, 243k on stock everything and they are creeking terribly. Afraid tie rod ends are needed as well, being in the salt did her no favors for the 2 years she was exposed.
17:29 If you can't get the tie rod castle nut to tighten because it just keeps spinning, you can use a pry bar and pry up on it to add tension to it. Pry between the lower balljoin and tie rod. That will allow you to tighten the nut.
you are a lifesaver, I was about to go buy new tie rod ends
I don't even own a 4runner and I watched the entire video because you are so thorough and very good at explaining what's important. Excellent editing also.
Thanks Bruce
@@PhoRunner are there any tell tale signs to know before it's to late?
I don’t know any lol
@@mikechalette886 if you just jack up the front end and jerk the tire around side to side, and up and down, you will notice if the ball joints are worn out.
Do you now want a 4Runner?
Hard to express through words just how grateful I am to you for making this video. You gave me the confidence to tackle this job on my own!
Anytime!! Glad it was helpful
Dude, you are helping me incredibly with my two 4runners. But I'm not gonna lie, you crack me up wearing no shoes working on trucks! Keep up the great vids. You're a fabulous teacher.
Thx for tuning in and glad I could help. Lol it was a hot day and barefoot wrenching was kinda nice
"Its an Asian thing" according to my homeboy 😂
Glad I found the video as I wait for a tow truck since my ball joint decided today was the day
This kit saved me more then $30... the canadian dealership was quoting EACH lower ball joint at $250 (before tax), luckily I saw this video and gave the kit Part number and it cost $200 (before tax) for the kit. Thank you!
Nice!!
Where did you get the kit in Canada? I'm in the same boat
@@tylerd281 From my local Toyota dealership (unless you saw this video, they won't mention the kit)
This was an amazing video.
Thorough, detailed, great video angles.
No idea why someone gave a thumbs down.
I’d love to see what kind of video is acceptable for them.
Thanks so much for taking the time and the energy to film and share this.
I just worked on my car today, and I know filming it would just have drug out the process, and that’s not even ensuring I had great camera angles, adjusting the camera, explaining stuff, and then editing the video on top of all that.
Thanks again - a lot!
No problem bud!! Just helping out the community. ThAnks for tuning in!
this gentleman is legitimate. thanks for the guidance and professionalism
You’re welcome!!
This is a great tutorial. I like how you are pragmatic about what the manual says, and what most people actually do.
With the right tools (23mm and 33mm ball joint press, breaker bar, cotter pin puller) the job takes about an hour per side and is no more complicated than changing brake pads and discs.
I try to research the topic and find common or easy ways to accomplish the task for y’all.
I’m an old lady and could care less about car repairs. But…buying a used 2000 for a son so I started to watch your channel. And my other son is a mechanic. You are amazing how you present these problems and repairs. Very interesting! Well, I’m hooked now. Crazy!
I’m happy you are here!!
Coincidentally; this was one of the first updates I made on my 99 4Runner. Besides changing the oil, I also replaced the manual and transfer case oil with Redline's MT-90, because it's GL-4 rating, making it safe for the brass rings in the 5 speed. I also did the rear diff with Lucas full synthetic 75w-90 because of better cooling properties. I changed all the drain plugs with GoldPlugs; made in U.S.A. mainly for the stronger magnet! I did order the lower ball joints from McGeorge Toyota in Virginia. Great prices from a dealership! I had no idea there was a recall kit! The main reason for going with genuine Toyota ball joints was that mine were the original at 328,000 original miles! This is why the factory parts may hands down be the safest bet, if you want to be as safe as possible. Thank you for this important information! I also ordered the 8 flange bolts and used the blue Locktite as a standard! Take good care brother! ❤🌄
Very nice!! I used 75w-90 Lucas in all my diffs and transfer case and have had no issues. I take mine all over so I want to be safe!!
I was thinking the Sequoia rear which I don't see why it would be different than the 4runner called for 140w in the rear?
Interesting. Maybe heavier vehicle??
@@PhoRunner you have me wondering now if I am remembering correctly. I am going to go look at the owners manual or service manual.
@@PhoRunner Went and looked at my 2004 Sequoia owners manual. It says "Rear Differential 75w140 synthetic"
Don't feel crazy now. The front it lists as 75w90...but I don't wave 4wd so that doesn't matter to me.
Dudeeee! you deserve all the praise, this is high quality and you make it look easy enough to tell your mechanic to get it right :D
Lol have them watch the video before they do your lbjs hahaha I’m kidding.
Thank you for this video! Doing my surf soon!
Anyone wondering if these are the same part numbers for a 3rd gen Toyota Surf (KZN185)…the answer is yes. 😊
Nice!
2002 4wd LTD. 322,xxx miles, second owner since January 2013 and 144,xxx miles. Everything looks original under there now.
Replacing upper and lower control arms, and sway bar bushings along with ball joints next week.
Great vid, great editing. Keep up the PhoRunner content!
Thanks bud! Those lowers can be rebuilt with white line bushings. Uppers, maybe go spc/jba
@@PhoRunner ordered JBA. Arrive 28 June. Awesome customer service. Thx!
This guy rules
You guys rule!! Glad I could help!
Yup.. this is the very first thing I replaced on mine after getting the car, and of course they were replaced with OEM Toyota ones. You can save a good 15-20% off if you buy OEM parts online. Way worth it!
Yes sir!! Good call
@@PhoRunner Great video by the way, an A MUST service to avoid catastrophic failure. I read in the forums if the car is post ‘00, there’s actually a service bulletin where the Toyota dealer will do it for free.
Yup I mention it in the video. The recall link is in my description to check if it qualifies! :)
@@PhoRunner Yes you did 👍🏻
I missed that part, sorry about that. Fantastic work covering this repair completely.
This is off topic, but I was wondering if your Climate Control Module (CCU) has ever failed. Mine is acting all crazy. I cannot turn off the A/C and only a couple of buttons on it work/do most of the functions. Maybe you could do a video on this? 😁
Is yours electronic? Mines all manual / analog haha
Excellent video! I plan on doing this job for my 4Runner. I paid $429 in parts out the door from Toyota. Using the recall kit, crown boots, and 8 bolts(recommended ones). I was going to buy the Toyota sway links but they were ridiculously expensive. Maybe another time. Thanks again!
That’s too expensive! Return it immediately and use my video description to get oem parts for under $250!
got my ball joints replaced at 90k. and I will do it inline with water pump/ radiator replacements. doing everything together makes the car feel much newer.
Yeah! Nice
Extra points for doing the entire repair barefoot!!!
Lol just some of it. I noticed the noise was coming into the Audio from my slippers so I took them off
Awesome vids tho man, very informative. Much thanks
No problem :)
I'm getting ready to do this and a bunch of other front end work including replacing the control arms. I just want to clarify, I don't need a ball joint press?
This video is incredibly informative, thank you so much for making it!
You only need a balljoint press for the upper balljoint.
Had this happen twice while driving. Thank God I was going slow both times! Once the ball joint breaks its game over , you're stranded cause the freaking tire comes off the car! Good video. Thanks for torque specs
Yikes! Sometimes you can strap it back together if it’s not too bad of a catastrophe
Great Video on how to! I've been running Moog ball joints for awhile with no issues!
I was never aware of this issue until it happened to me in my 97 Tacoma. Just turned into a parking lot and Thump. I also have a 97 4Runner and my wife drives a 2000 4Runner. I guess I’m going to do this repair on two more vehicles.
Very nice video! Our 3rd generation has 400,000 on it. Great point about quality control!
Yeah who knows! Toyota cut cost like everyone else I’m sure
I did these a few months back on my 97 4runner and fixed everything, didn’t think I could tackled before the video but it was easy! I need to do the same thing on my 98 Tacoma, LBJs look identical so I was thinking of just ordering from McGeorge again…if they don’t work I’ll just have a spare set for the runner lol but I’m 99% sure they’re identical
If I recall correctly, the Tacoma has a different part number!
The tie rods won’t fit if you order 4runner parts. Outside that, should be similar repair.
Awesome video as usual! Just swapped mine out over the weekend but then discovered my outer tie rod boots were torn. New project and waiting for parts….
All good. Baby steps. Moog is fine for this hehe
I just picked up a 3rd gen today, definitely using this vid to inspect my control arms. 🤙🏼🤙🏼
Nice!
You're a savage doing this in your sandals. Makes me think I can do this repair on my 2000 4runner.
I do most of my videos in sandals lol >_
Best video I've seen in a while. Love it when you tell us what size sockets and wrench to bring before we get down on the ground. Gotta say that hand in the pinch point at 14:57 had me on edge......Mine is a 2001 Extracab TRD Tacoma, bought new, 255,000 miles. No rust, original alternator (did change the brushs but they were still long). I was looking how to check the ball joints, thx.
I probably could have secured that better lol.
I try to lay out the tools since I hate not having everything I need before starting a job.
Fun tidbit: I usually shoot that scene after the job is done. :)
I have a 02 Tacoma with 300k miles I’m the 3rd owner and don’t know the history of the truck. It drives great but for no more than that it costs I think I’ll replace the lbjs just because. I’ve changed all the oils and other maintenance so I’ll be happy to do this job.
Good to have peace of mind
Thanks for the very detailed and clear instruction, my guess is you've done this job more than once before. Well done, man!
Most definitely! I have done it many times tearing apart my suspension :)
great job on this video…own a 2006 4runner… this video is what i was looking for instructions with good video to follow… your tips along the way explaining good and bad options … are clear for owners to choose their presence👍🏻👍🏻👍🏻
Glad it helped
Thank you PhoRunner for the Peace of Mind, now no more fear of the front dive boogie 😁
Anytime!!
Very simple, very solid, and very specific on the detailing! Thank you for the helpful content!
Any time!!!
Very helpful thank you I'll be doing my son's 96 before he leaves for college.
Safety first!!
I liked your video so much I almost bought the parts on the link and then realized I have a 2005 Sequoia.
Lol!
This video just helped me change my lower ball joint in no time! Thank you for making this
You are welcome
That's a good idea to do lower ball joint when you do your timing belt.
It’s a good time to refresh all components that can cause severe injury/damage/safety concerns
Thanks for this thorough how-to. After watching another video about the OEM bolts (both the original "green" and updated "red" were included in the testing) I went with ARP 35mm bolts (673-1004).
Nice choice
This is the ideal moment to do the tundra brakes upgrade too !! Nice video
Thanks!! Tundra brake upgrade is a nice upgrade!!
Hell yea my favorite 4runner chanel finally putting some video out . Glad to see you back my dude
Thanks man. Been busy hehe. Thanks for the support
@@PhoRunner we here waiting for your uploads brotha keep em coming . Great video bro
About to upgrade my 4Runner and all your videos have been an immense help. Thank you so much!
Awesome!
Proud owner of a 97 4Runner. Your videos are informative and easy to follow. Liked and subscribed!!
Thanks 👍
Perfect timing, was gonna do this weekend, and this and Tims video are perfect
Welcome!! Thanks for having us in your home!! Hehe
this video alone made me subscribe.
welcome sir!
Just had a passenger side fail 2000 SR5 4Runner 248,000+miles.
Think they were the original.
Bought Mooge replacements.
4 bolts 1 Castle nut 1 pin for castle nut
And red locktight.
Some scuff marks on inside of wheel.
Pulled forward about 4-5ft and loud noise. Got out and seen my wheel turned slightly Fun lol
Lol wow
Moog isn't what they were three decades ago. All made in china with questionable quality. You should redo it soon with OEM. Not worth your life and limb trying to save a few dollars.
@@Nessal83 Already installed.
Usually I would get oem parts but I needed it fixed then not days later.
Probably going to get the oem lowers and uppers when I order the oem rear passenger seatbelt as it is not retracting all the time. You are correct though, cheap parts are exelent for on the fly fixes but not long term solutions.
Don't get me wrong I'm not against cheap parts just the ones that I don't have to risk my life with lol
@@frankdelucey2137 yeah totally agree. Certain parts like this where quality is all over the place and for such a critical part, I only go OEM. But if it's rotors and pads or stuff like that, I go with a good aftermarket brand. Wish you the best.
Yeah. I’d be ok with aftermarket brakes but my aftermarket ones squeaked so much in reverse lmao. I had to go oem for those pads too
Nice video. You are very explainy. I love the channel name. I'm gettin Pho tonight because of you. Cheers.
Lol I talked even more but I cut some out lmao. I realized my video didn’t start until 7 mins or whatever it was hahaha. Sorry all lol
I had just done the passenger side of my 99 Tacoma and pretty much did it the same way, I was hoping that you were going to give the torque specs. They looked like the exact parts but didn't verify, I had heard the 1st gen Tacomas had a lower ball joint recall also. I have 140k miles and very slight play on the passenger side but of coarse I'm going to change the driver side also. Didn't know they had a kit so had bought them separately. Thanks for the specs. and thought it was a great video.
The torque specs are all in the description and overlayed in the video when torquing down
Excellent video bro. Very very informative and again all the specs is a plus. Stay safe dude. Aloha from Kansas
Thanks!!
Thanks from Argentina! Great material.
They are called SW4 here and run on a 3.0 diesel (1KZTE engine)
Looking forward for the UBJ video!
welcome!
The moog 555 greasable lower ball joints work extremely well been using 1 set on each if my rigs for 5 plus years now I grease then after every oil change
Good to know
@@chuckerchuckerton7046 the ones I was talking about are still made by moog
Check that the Moog LBJs you get have the 555 mark and look like the set in this video. Moog also ships non-555 LBJs but the castings look like crap and have a domed cover on the bottom side (the one shown in this video have a flat cover).
You make the best DIY videos. I’m totally inspired to tackle my 98’ 4R projects this summer. Thank you!
thanks bud! I got a big project coming up for overlanding so stay tuned hehe
Appreciate the time you took to make this video! I guess I better check my 1st Gen taco with 268k miles. I don’t think they have ever been done.
No problem at all!
same here - gonna get this done on my 2004 Taco now. Notice on your Taco (if it's like mine), there is a squarish rubber boot cover over the LBJ. I was comparing with my 4Runner and thought that was interesting that aren't on those for some reason.
Keep old ones for Emergencies no matter what part you change is good practice
Especially the ones that commonly fail!
@@PhoRunner yep and you never know when a old part will save your but in the middle of no where
thank you for speak good and understand engrish language. u understand all.
No problem!
yes very easy follow your explain. and not speak very fast. thank you. very nice 4runner you own. my 4runner is 1991 4runner.
Thank you for this video. I don’t have the tools for the job, but I got the recall kit part number I didn’t know about! Saved a few bucks. Those 30 something dollars is alot for me at the moment. And the part numbers you gave saved me some time. Thank you for the video and detailed description!!!
Anytime!!! Sometimes finding the parts and info is the hardest part!!
The pictures to scare us into getting our priorities straight on our 4runner is so right dude haha. Pay the 200 bucks now to avoid several thousands in damage, and the price for OEMs we can get for far less than the dealership would sell them.
When the shop gets done putting on my UCAs, I'm going to order my LBJs
Hey, thank you for the video. I was wondering if that recall kit works on the prado 90 series and did that kit settle the problem of ball joint total failure causing wheel to collapsing
...very good DIY video PhoRunner....thanks for posting... :)
You are most welcome sir!!
Im getting a "click" from both front wheels when I go over speed bumps in my 97 SR5 5 speed (for over 2 years). Checked the suspension and everything looked good. Except there was a little bit of movement in the LBJ on both sides. Parts ordered from McGeorge. Going to install soon for a trip up to Trinity. Thanks for the great Video!
Cool. It could be something else but nevertheless, good maintenance item to do
Give this guy a medal l. Quality videos
Thankssss! Glad you enjoy
Thank you for the clear explanation and part numbers! Excellent videos!!
Anytime
Very nice as always man. I learn something in this one. Never knew they had a special tool to separate the ball-joint. I always use the sledge hammer 🔨. Great job my Friend.
Hehe nice. Yes sledge is the universal tool :)
Great Video...off subject I did the extra ground hack for the fuel Guage. Works PERFECTLY..💪💯💪💯👍👍👍👍👍👍👍👍👍👍👍
Nice!!! Now you really see how bad your mpg is!!! Haha
Thanks bro you helped me do mine! Just finished mine up!
Thanks for the video, I really appreciate you making it easy to follow. God bless.
Glad I could help
This is a fantastic video! One of the best DIY Car repair videos I have ever seen!
Thankssss
Another great video. Hard to imagine this is just a hobby for you, but that's how it seems.
Just a hobby hehe. I actually do computer programming for a living
Top notch info. Thank you for your effort in putting this all together. I have a 2000 4x4 most likely on the originals. Any idea why mine would not be on the recall list as well?
New subscriber and hands down the absolute best video on the replacement of the lower ball joint(s). Keep up the great work.
Good info, thanks. Do you thinks it’s worthwhile to do the upper ball joints at the same time? I have a first gen Tundra with 230k
Definitely. It’s a harder job though.l abs not so critical. If it’s not leaking grease/ moist and has no play, I’d run it.
Great vid! Now you need to do a bush mech CV swapout tutorial.
A what now haha.
@@PhoRunner swapping out a front axle....just like this vid....but out on the trail....bush mechanic style. I've only seen a couple videos....but they not good like yours
oh yeah... maybe one day hahaa guess I put my hi lift to use lol
Great vid! Nice and straightforward!
Thanks!
goodness you have the best description and content
Thanks
Straight to the point, thanks for the video bro
thanks for tuning in
Great video(s) brother. I have a 2001 4runner that I picked up and have been watching a lot of your videos on getting it in top shape. Appreciate it! Keep it up.
Awesome!! Don’t forget to check out Timmy! He’s the legend!
@@PhoRunner haha Who is Timmy?
Timmy the Toolman!!! He has way more videos than I do on the 3rd gen 4runner. He also does way more engine work than I do lol
@@PhoRunner Thanks. I'll check it out. It better be as good as quality as yours!! ;-)
Definitely more info! He’s the man!
I cannot believe none of these Toyota sites will let me look up a lower ball joint assembly for a 2007 4Runner. All I can get is the ball joint attachment without a ball joint! It's CRAZY!! Going to my local Toyota dealer tomorrow and blow his mind, because I have already been on their site as well.
Hmm interesting lol. It’s not a high failure point on the 4th gens though!
@@PhoRunner Got a question for ya. Ever seen a front axle that binds up and causes vibration, and it's not the cv axle? Seems like it's coming from the transfer case. All my tie rods and ball joints check good, and replaced the axles and hub bearings about a year ago. Not looking good for me so far.
Is it the front driveshaft maybe?
@@PhoRunner It was the CV axle. as soon as I removed it from the hub and bearing assy, it popped, and spun freely. I'm replacing it with an OEM axle, much beefier than the other one I had in from a few years ago, also installing diff and sway bar spacers and upper A arm to offset the bind the lift puts the front end into. The upper A arms will make for a better alignment also. Thanks for your time!
Nice glad you got it figured out!
Quality control was better back in 96 to 02 compared to now days that is for sure
The acceptance levels are probably a lot lower now than before.
@@PhoRunner yep
Love your video. well done !! Would like to see how to replace the timing belt .. thanks 🙏
I’ll probably do that video later this year when it’s cooler lol
Thank you! Just tackled this repair and your video was extremely helpful 😊
Thanks bud really specific on this job
It’s an important one!! Thanks bud
Good video. Can you put the year model of the car in the tiltle ?
Thanks .
It happened to me (974R 2.7 3rz 2wd Manual Tran 450k miles). I had taken it to Sears for a battery test/warranty, when the tech pulled out of the garage and turned down a bank/steep driveway the drivers side ball joint came apart. Luckily he was going slow and only my fender got very slightly bent upward. I tried to get Seats to compensate but they didn’t of course. Replaced it but can’t remember if I did the other side too.
I dig your videos.
Totally lame Sears didn’t take care of it haha! Glad they took the hit and not you
Just changed mine out yesterday
Very nice
Is this process the same with a 96 tacoma 4x4? Got all OEM upper and lower ball joints and some inner and outer tie rods with the sway bar links and struts. Whole shabang and learning on the spot haha. This gives me the boost of confidence I need.
Same procedure but the parts will be a little different
Thank you for your great video. This makes life easier.
Anytime bud
03 Tacoma PreRunner..Just replaced my lower ball joints with OEM , I used the 10933 bolts at 37 pounds , but I’m kinda thinking of switching them to the 10066 flange bolts, would y’all recommend that ? And does it matter if I have the ball joint protector/cover that some tacomas have
Yeah. The lower torque is probably to not destroy that dust cover
I personally would use the stronger bolt but I wouldn’t sweat it if your threads look clean and you used lock tight
What brand tire/style are those tires? They look sweet, also would they clear a stock height 4runner?
Those are bfg ko2 265/75/16. This 4runner is stock and hasn’t had any issues :)
@@PhoRunner awesome thank you!
Such a informative video sir ....... sir how to control cabin noise dashboard noise how to fix it sir
I'm not sure how address teh cabin noise or dashboard noise. Perhaps some old clips?? I used to have this crazy squeak in my 4runner too but it seems to have disappeared lol. Maybe all the bushing replacements soften up the ride :)
Good thorough video Brother nice work
Thx
Ball joints are a major safety part with any ifs veichle
This one specifically though! No warning signs :(
@@PhoRunner ik why im replacing my lower ball joints which have never been replaced
Great no nonsense video. Thanks!
You are welcome!
It's not that the balljoint is designed horribly. It is the design of the suspension that keeps the balljoint in constant tension and it's being pulled apart. You can see that the following gen fixed the design issue.
Yeah you know what I mean ha. The new suspensions are a painnn to repair though but I guess you don’t have to do it until it’s truly bad
I just wanted to throw this out there to help someone out. I kept the castle nut on there, and when I separated the ball joint from the tie rod it hit the castle nut so hard it ended up mangling both the nut and threading. I think it was because I didn't screw it on enough. Just be sure to screw it in some if you decide to keep it on.
A few threads for extra strength for sure. Fortunately you should be replacing all those parts so it should be ok.
i have a 02 4runner, would it be better to go with the flanged bolt instead of the one with the washer because the flanged bolt has a higher torque spec?
Flange always
I plan on following this video to swap out my LBJs, but I was wondering if there was any other maintenance you recommend me taking care of while I'm doing this
Id just do these and save up for the rest or do it all at once since it will require an alignment. You can get away with this one without an alignment as it doesn’t touch alignment adjustments.
Great video! Can you recommend other suspension system in order to eliminate the ball joints? I want to lift mine more than 3 inches.
There isn’t much stuff out to eliminate the balljoint unfortunately. A lot of experimental things people have made.
THanks for the video. Planing on replacing the upper and lower ball joints. Is there a preference ont he order. Lower first or upper first. Does it matter? Thanks
Lower is more critical
very important information! thank you!
Quick question for you, do you think the recall kit would be fine on other year 3rd gens? Mine is a 97 and although the recall was just for the 2000s, all my research on OEM LBJ for the 96-02 shows they are identical. If I'm not mistaking, the recall kit would be the same exact LBJ as previous years...would it not? I need to replace mine asap, 243k on stock everything and they are creeking terribly. Afraid tie rod ends are needed as well, being in the salt did her no favors for the 2 years she was exposed.
Works for all 96-02 years