MATHEWS V3X 29 BOW BUILD
HTML-код
- Опубликовано: 12 сен 2024
- www.mathewsinc.com
BEEREAL MERCH - beerealmerch.com
ULTRAVIEW - ultraviewarche...
MY LAS ARCHERY EQUIPMENT - www.lancastera....
Check out my PODCAST - apple.co/3vyQ6JP
INSTAGRAM - / chrisbeereal
SAVE 20% ON HUNTWISE - huntwise.com/c...
My CAMERA Gear
My MAIN Camera - rb.gy/nzanez
My Favorite Mic - rb.gy/vbl1vn
My VLOG Lens - rb.gy/5pk6eg
Best DO-IT All Lens - rb.gy/klx2x5
Best Hunting Lens - rb.gy/wvwxan
Audio Recorder - rb.gy/5pklm2
Other Gear
Editing Laptop - rb.gy/jps8mn
Editing Software - rb.gy/pwwuo9
Best Action Cam - rb.gy/w302ih
Camera Case - rb.gy/ie3n8l
Best Beginner Camera to Film Hunts - rb.gy/j902od - Спорт
55:30 "K we're in the target"
Me every shot from 30
Can finally show it off!! 🤘29 is a SHOOTER
That's cool seeing y'all over here too!👍🏼
Ha Ha Ha watched yours then came over here, Life is Good!
I recently got my first bow, I have been practicing a lot and have gotten my group at 20 yds to around the size of a subway napkin folded up, your content has inspired me to get a bow and enter the sport of archery
Get some instruction next. Easier to build good technique now than to fix bad technique later.
Awesome, best of luck to you.
Let the addiction begin
😂
@@silvermediastudio
100%
I am going to start using "folded subway napkin" as a standard of measurement. Thank you. Lol
Kimmikka okok mais ko😊ok0o0o9ko😊k😊o😊k009k
Would love to see an arrow build. Great vid tho!
Love Chris’ bow build videos.
I shot the V3-31 last year and loved it.
I ordered the V3X-29 last month.
Can’t wait to set it up.
Went with the Hamskea Epsilon rest.
And I ordered a set of GAS Ghost string.
I’m not a fan of stock Zebra strings. Never shoot them.
But I do set them up and tune and Paper clip them together as a back up set when I go on my Midwest hunts.
They should add a machined guide for the degree down stabs on the front. Get an etch at the 12 o'clock of the washer and a line on the QD so that when you tighten you can line them up and you don't have to eye ball it.
Thanks for the carbon bar cut tip Chris! Was "literally" just asking my dealer this exact question regarding my current Landslyde because I didn't ant it sticking out the back of the riser simply for the aesthetics. Also, awesome the Landslyde and the multiple drillings to adjust the entire gang.
That’s a beautiful looking bow and I love the integrated sight mounts! Way to go Mathews!
Ive had this bow since last December and it has been the best shooting bow I have owned. 7 Deer with it so far. Love it.
From my experience in other applications, yes, allowing paracord and other synthetic cordage to burn makes it become brittle when it hardens. Better to kiss it with the flame and bring it to melt together gently.
I'm impressed with how quiet that bow sounds. Really want to try the 33
He seemed happier when you received the Hoyt RX-3. )))))
Today I handled one of these bows. The one thing I noticed right away was how much heavier it was as compared to my Mathews Ultra Max. For a hunting bow I am still partial to the older Mathews bows simply due to their overall smaller size and less weight. At 70 lbs. my bow will shoot relatively heavy (470 grains) at around 285. There is some hand shock, but I don't mind. I'm sure these newer bows will shoot, and draw more smoothly without any hand shock.
Killer as always man! Absolutely love the Mathews community as a whole and hope to be a part of that team one day 🙏🏻🙏🏻
Chris just rips into the unpacking of the bow, new bows I get in I’m scared to even remove the bow from the packaging lol.
Side note- been working with carbon fiber for years… don’t breath that dust .. the nastiest stuff ever.
Great video man very informative. I've been shooting bows for several years and I travel all over the country for work and I've never seen a bow shop that will go through all this. They pull them out of the box slap some parts on them and hang them on the rack. Ultimately it's up to you to sight it in and get it where your comfortable, most shops around oklahoma and arkansas won't even paper tune one with you. I've been looking at a new rx5 for sometime but I know what a hassle it is trying to get one setup.
I just got into bow hunting, didnt want to get too deep money wise so my local bowshop had an old Hoyt Rampage new in the box I picked up. Setup everything out the door was 350 (drop away rest, sight ect.) So far Love just target shooting with it so may have found a new hobby.
I am getting one of my coworkers into archery...I haven't shot in a year but I am excited that he is excited to learn!
G5 blu glue works great for those outserts.. I shoot the same arrows but only downfall is once they’re glued on they on 😳
Just picked up my V3X 29 today absolutely like the feel of the bow in the hand, it’s super quiet and incredibly fun to shoot.
Could make a game of “how many times Chris says, “literally.” Lol
Take a shot every time he says literally 🥴🥴🥴
@@jackbuendgen389 would be hammered half way through.
@@dr1822 shit I'd be done in at the 5 min mark 🤣
@@jackbuendgen389 I’m trying to give myself credit. Lol
I was Literally about to comment the same thing
Million allen wrenches and you'll still never have the right size when you need it.
Thank you for these vids, it's like a meditation sat watching you setup your bows.
Love to see you do a vid on the adjustment of the windage and balance and where the scope need to be to fix the extreme left issue of the integrate mount. The camera man had a difficult time capturing that part
Dude I want this bow so badly for three reasons!
1. It has an X
2. 29ATA is my favorite ATA
3. Bow pressing string.
Awesome video! In an upcoming video could you show a side by side comparison of a V3 with a quiver on and a V3X with the new quiver? It would be great to see how much closer to the riser it is. Also, you touched on the sound of the new bow in the video so what about a comparison between the two. Again thanks for all of the great content!
The hamskea epsilon works great. That's what I shoot on my v3x 29.
Awesome bow technology right there! Mathews & PSE have really stepped their game up this year. Their designs, quality & looks are the best in the business right now! Keep Killin' It
Check out the new prime many people are leaving Matthew's behind because of how well it shoots
@@thereaper3575 Yeah I've heard good things about it & all the reviews on it everyone seems to love it.
@@C-24-Brandan I'm picking mine up tomorrow hopefully 🤪I'm shooting the nexus 2 rn and don't really want to upgrade but the inline looks to good not to 😂😂
@@thereaper3575 nice nice that'll be a fun day of shooting ect, congrats on the new bow!
@@C-24-Brandan thanks bro have a nice day and good luck with the rest of deer season.
Hey Chris, I'm a michigander myself and i love the content ur creating. I have a question about something you said in the video. If i buy a bow off the Mathews website, is there no up charge on the attachments i choose to customize my bow with? Thanks and good luck to you for the rest of your season
Is that the uv3 or the uv3xl on your V3x video build?
I got a mathews vxr, after the first month of shooting it the limbs started creeking the first time I would pull it back. I brought it into my dealer he thought it was fixed, it wasn't. Took it back to him and he had to send it in to mathews this time. It wasn't doing it after that, but after a month it was creaking again! At this point it was almost the rut and I wasn't going to miss that waiting for my bow I spent 1400 on. At what point do they stop trying to fix a problem and realize you can only put so many different limbs on a bow b4 you realize that's not the problem
For top hats always move the cam in the direction of the tear for left/right. “Shootin left, move it left”. That’s how I seem to remember
Yep i am one of those that lived under a rock but moved and a buddy is helping me get into bow hunting. Also, everyone must do a shot of booze every time “Literally” is mentioned 🥸
I can’t be the only one who saw Chris kill a massive elk on the Mathew’s proving ground preview... when’s that vid coming out👀
Was at school today and checked the Mathews website I saw a new bow and here’s the vid 😁 thanks Chris
Nothing better than coming home from a long day and seeing Chris posted. Keep up the great work.
I just picked it up. Have no idea how to adjust the M. Sight. Maybe you should do a full video on the sight original new mathues groove sight..I adjusted a little bit..but wasn't sure what did what. 🤔 I seen the pin after loosing it that rotate moves independently each pin u want to move so what way is up what way is down to rotate to get your arrow on target. Left and right seam close. Otherwise sick build awesome shop. And I'm happy with it..just need help figuring it out..I got all m. Parts like you. And bolt on quiver. Is awesome I didn't know they had the pop off. Like yours. But it doesn't bug me on off.
Honest question. Isn't the dove tail most useful to align the sight housing with your peep at full draw? If that's true why do you just cut it off mid way?
Dont cut your sight. Unless you have sponsors that send you them for free. You will not be able to sell it on the used market.
also good point bigghinz
@@ViewIndepth I wasn't so much worried that he cut his sight bar, you can do whatever you want with your own stuff haha. But he it seemed like he just stuck it in somewhere in the middle and called it good instead of using the adjustment for his peep. He is a way better shooter than I will ever be so I am genuinely curious.
Hey Chris! Don't check timing when seting up a new bow?? Breaking it first?!?
Great build up video as usual, keep up the great work!!!
Ever heard the Mathews no cam? Forgot how quiet bows used to be before the hatchet cam craze. The old camless Hoyts all you heard was the nock coming off the string
Saw a comment on doing a video on arrow builds and I would also like to see that. What arrow setup you use for whitetail hunting would be awesome.
Can you please give us the details on your arrow setup? I shoot the Victory VAP TKO as well and would love to achieve the 450gr mark. TIA. LOVE YOUR CHANNEL
I would love to see an arrow build. Got my bow set up but not sure what arrows to run this year.
I had to go way right with my landslyde in my 33 to get it shooting dead on. I just used my click micro adjust. Now I still have about 1/4 of micro bar on the right an 3/4 on left.
Cut that dovetail with a cut off wheel on a grinder then you can just hit the outside edges real quick to bevel it and make it look like it was always meant to be.
Very similar to an arrow cutter wheel.
That top-hat washer on the V-bar goes against the riser Chris... Not under the cap head bolt. Look at the directions.
If you were 18 and short on money... would you buy the v3x for the extra features or buy the v3 at a cheaper price point since it’s a year old? Basically what I’m asking is if the features are worth the money.
Hey there Chris its Chris here i have a personal choice question and it is " i have purchased an Elite ritual 30 which i absolutely love but im not bias to other companies or other models but im curious to know why there isnt more big name shooters using more Elite's? " thanks in advance love your channel keep up the good work.
What size binos are those?
I just bought the 29 a few days ago. I love it. What advantages does 4 fletch have over 3?
Stabilizes fixed blade broadheads better.
I built a mission riot by Mathew’s and it’s one of the best bows I’ve used
You forgot to show how the quiver has got room to fit the limb at full draw dew to it been so to the riser, it's going to be near impossible to go past a Mathews bow now.
Hey Chris what size is your uv3? XL or standard?
The bow looks nice I’ll have to stick with the traverse for draw length limits of the new bow. Side note…I had the same issues with the vap arrows/outserts. tried multiple glues and methods.. in the end the arrow flight was great and I did take one whitetail with them.. it just wasn’t worth losing inserts in targets and constantly having to maintain the issue as I love to shoot often. I’v since settled on Easton axis 5mm with the iron will ss collar and Easton brass insert. The iron will collars are bomb proof
Had the same issues with Black Eagles. The outserts would pull out. I ended up going with the Ethics inserts with sleeves and haven’t had an issue.
Excited to see your 33x build. Just shot the 31 today which I loved, just need a little more draw length.
how did u shoot a 31 i thought they only released 29 and 33
Just picked up this one a couple weeks ago, really happy with it. This video really sealed the deal for me
New Mathews Bow + Chris Bee = instant like.🤝🐝
Hi.
Very nice video and I must say that these V3 bows are really interesting. And after having seen this video I'd say that the V3X is perhaps even more interesting. Did you make a similar bow build on the V3 27". I probably would like the 27", because my drawlength is only 25,5". And as far as I understand you say that the best would be a ata close to around your drawlenght. Now I am shooting a Hoyt Defiant 30 - nice bow as well. So a V3x in 27" version could perhaps be very interesting for me.
But there is one thing I realize now on Mathews website under specs: These bows starts at 60# and I don't want it to be more than 42-45#. I am not hunting, I would use it for 3D and target. So that is unfortunately a showstopper.
But anyways - there is a few things I's like to comment on in your bow build:
- When you make your arrow horizontal, I don't understand why you move the bow press. I would think there is a too high risk that the arrow moves on the string - even just a little. I would let the bow be in vertical position, line in the arrow, so it's totally horizontal and then I would at least start to tie the nock points are at least the upper one. And first then, I would move the bow in horizontal position, to continue making the D-loop.
- A 2nd notice is that you didn't do the 1, 2nd and 3rd axis adjustments - at least not very detailed. Ok maybe you would not do that in every video, but I assume you would do that at some point, right?
Thank you for adding the part where your v bar is set at.
Ordered a 29 murdered out V3X today! Can't wait!!
Have you thought of doing an arrow build video with the VAP TKOs, I'm sure you get this question allot there what I shoot and I'd love to see how a pro sets them up!
Best on RUclips right now ! HANDS DOWN !
My wife’s not going to be happy with you. This is a great advertisement for a new bow!
Chris, not sure if you'll have the answer to this, but is there a specific axcel single pin that'll fit in the new dovetail slot on the V3X 33"? The two they market to sell with the box are both multi-pins.
Hey Chris does the quiver, arrow rest and things come for the $1199 thanks
29 axle axle would be very nice, Im tall and my VXR is 28, I love how compact and the shorter it is the better it is in wind, but one inch would prolly make a nice difference
What is your draw length
@@jeyana2543 30
Love the bow! Enjoyed the build but ready to see you in a tree slingin arrows at some bucks.
2 bows 1 inch longer ?I will give the sight mounting 100%, quivers 75% great video personally I don’t like the hump in cam system but Mathews makes a good bow
When he said “slop on the nock” 👀👀 😂
Did you have to buy a bracket for your axcel sight to make up for the windage to the right when mounting in the center?
Do you think it is worth upgrade from a V3 or a VXR
Could you use the low profile quiver with like a Spot Hogg Grinder?
I'm guessing the plug with the qad was sarcasm? But oddly enough when I bought my v3x and qad together the bow shop threw it on for me (didn't ask) and they didn't give me a bag of Allen wrenches or install a plug 😢
Awesome setup. That thing is SILENT!
Is a mathews vertix compound bow as good as a Hoyt Maxxis bow?
What diameter peep do you use?
what peep size you shoot ? As always - Great Stuff 👌🏼 Keep going
Where can I get a scope rod like the one you're using. It seems on my accutouch no matter how tight the screw and nut are there is still some sight movemeant in my scope. Im just using the rod that came with my sight. Im running the UV3XL. Thanks
Keep the bow builds coming please!
I would freaking love for Chris to set me up a bow 😂
Is there a budget bow build? I need a new bow and i have a very tight budget. My previous bow had a crack in the limb. So time for a new one
i will have a 3-40 chance of winning one of these tomorrow at my local bow shop!!!! hoping i get all the luck i could possibly have! if so ill only have 75$ in the bare bow!!!! my bow i have now is junk its a diamond... would easily take down a deer. but its not grouping the way i want it to... looked it up and apparently its a problem for this diamond bow.. bow shop made me shoot a v3 and i instantly fell in love!!!! my question is do you have a shop where you sell stuff for this bow? if i get it and im gunna order stuff for it i would like it to be from you. since you inspired me to look at em!!!!
Let’s go buy one of these
Not even going to lie….I’m pretty shocked you weren’t bare shaft tuning right out of the gate.
Also, wish the cameraman would have been standing slightly behind you for a few more shots so we could watch the arrow flight while you were shooting outside. Overall great video!
Not the same exact boat just a month ago have 28 inch drawl links but I’m having problems with my nose not touching the string. Wondering if you had the same issue if so, what did you do to remedy it?
First video I came too! Pumped for it!!!
They should be degrees marks on the Quick disconnects and on the riser where it mounts.
LETSSSSSSS GOOOOOOOO. Mathews on top this year! Keep up the hard work Chris!
With the same bow as last year? Ok
are you still able to use the traditional sight mount instead of the dovetail sight?
Yes you can.
@@brucequinn4240 thank you!
Hey can you tell me whether or not the new v3x can be turned down to like 45 pounds for some of us shooters out there that don’t shoot 50 plus pounds. Why would Mathews stop making 50 lb limbs . My bow shop telling me no bueno to turning bow back the limbs that far. I shot prima and not impressed preferr my triax . But really wanted to try the new v3x .wish Mathews would do what Hoyt’s still doing make bows for everyone . Or am i missing something? Can you do a vid on switch weight and how it related to lower pound shooter like 40 lbs and up thanks
What's your draw length Chris I must of missed it. Also for lean you follow the tare... Tail left add lean, tail right follow and stand cam up straighter. Any reason you went to Victory from Eastons?
Sweet looking bow and awesome video!! Ordering mine tomorrow. -Jeremy
Can you tell me what the grip helps with? I find with the stock grip my v3 31 is really sensitive to torque it. I loved the wooden grip the best.
That is one slick bow. I wonder how many bow builds this is for you? It's a few, you could probably do some bow giveaways and still have plenty of bows to build a man cave out of lol. Just messing. It's a great video, great review and very informative. Keep up with the great content, just keep doing what your doing, BeeReal.
30:30
Me: *just buys the shorter bar*
I don´t have the time to set it up myself. Do you think bow fitters at stores are as meticulous as you are? Or am I doomed to be a step below perfecttion?
What would be the best bow for hunting
Will the Hamskea Trinity work on this bow with the low pro removable quiver? Also will Black gold pro with dovetail mount work on this bow? Want to transition my old accessories to new bow.
how did you get that landslyde to work with the bridgelock without the windage bracket?
Great bow build! What bow vice are you using? My old Last Chance Archery bow vice won't hold my Mathews V3 31.