Troubleshooting like this is stuff we learned as kids, in shop class and Vo-Tech in high school. Sadly, many people have no troubleshooting skills at all nowadays. See it every day at work, hard to find people that can do basic troubleshooting.
i know you commented on this a long time ago but idk how old you are, im 33 and by the time i got to middle school and high school they had done away with all that shop class stuff so i never got the chance to learn this kind of stuff, and unfortunately i went to vo-tech for welding. i can troubleshoot small things just from learning myself through trial and error like a mower and atv's but not a truck to much new tech packed into all these new vehicles! LOL
@@chopsfisher1622 Most school systems have done away with classes that teach trades and mechanical skills. It’s a shame. The people running things think everyone will go to college or the military instead of working with their hands.
Thank You for Sharing, Very much Appreciated as I'm having same issue. It would be nice IF Only the Animal Attractant was left out of the wiring insulation mix, maybe add a bitter root blend to repel them critters.
Successful mission again JC. Somebody will be interested in that camper, looks like it's got a lot of life left in it. Glad you didn't have to bite the bullet and replace the TIPM! Have a fun and safe 4th with your family and friends!
I know you're selling it but towing a RV with a regular Fifth Wheel (Semi Type) is not a great idea as you lose to side to side pivot. This can cause extra torque on the Fifth Wheel's Pin Box. If you're only towing a short distance, you should be fine but you "might" do some damage on a longer tow. Now, I know years ago this is how ALL Fifth Wheel Hitches were made but we all know that over the years they have been making the frames on those trailers as cheap as possible. Great video on troubleshooting, thanks for showing it from beginning to end. It takes patience to troubleshoot, which most don't have. Thanks for all of the great videos and please keep the coming!
Iv run into a few of these with pin fitment issues (hotdog down hallway). I have also repaired a few TIPM that had corroded pins. Just run wire where pin goes inside TIPM
Crap! Mice! I literally just found a mouse nest in my glove box last week. No joke. I drive the truck every day. They collected the insulation on the firewall and made a nest. Little bastards were in the hvac too. Put a glue trap in and caught one. My biggest worry was them eating wiring in the dash. Seriously concerned with that. Reference my previous comment about canbus. Imagine mice in the dash eating up wires. Ugh
Son of a gun. Isn't that just the way it goes. But you did well backing up and start from the beginning again. That could have been a real head scratcher.
Some times it sux to do and i dont like to but some times u just gotta run you a new wire ...i have got lucky and found wire broke inside the insulated part it just pulled apart but its a pain some times..specially on a school bus with multiplex
My 03 dodge fried a tipm after booking up a friends trailer. I lost the passenger side turns and tails on the truck only. Never did get it fixed because apparently you have t9 go to the dealer to ave them reprogram a new one after install. And I hate dealers. On my 2013 ram, I swapped the 68rfe trans for a g56 6 speed. You wanna talk about crazy wiring. The can bus system in these trucks are crazy. Mine is a Laramie so it has the fancy touch screen stereo. Took a lot of doing to get my backup camera to work again.
03-04 didn't have tipm supposedly. I have an early 04. It has a fcm and a fuse box. It's supposed to be not as sensitive as the tipm. I think they started the tipm in 05 or 06. I haven't had any trouble yet with the trailers I've pulled but we'll see.
Is that JAYCO made in Australia? Factory is near us in 1 Jayco Drive Dandenong Victoria Australia. Jayco caravans, (read trailers in USA), are a very common choice Down Under.
Beautiful truck! (at least what I could see. The dually is all I'm missing on my 2011. 4x4 6.7 Cummins. quad cab leveled, a damn nice truck but just not a duall Where is the connector to check the lights? You didn't mention that. i've got the left/driver side giving me problem
hey jc johthan out of Baltimore how do u feel about the new international cv light to mudiem duty trucks they look like dura max but its the same thing sterling did with dodge please reply thanks
I had the same issue. A mouse problem. My turn signals, headlights and 4x4 were all effected.
Troubleshooting like this is stuff we learned as kids, in shop class and Vo-Tech in high school. Sadly, many people have no troubleshooting skills at all nowadays. See it every day at work, hard to find people that can do basic troubleshooting.
i know you commented on this a long time ago but idk how old you are, im 33 and by the time i got to middle school and high school they had done away with all that shop class stuff so i never got the chance to learn this kind of stuff, and unfortunately i went to vo-tech for welding. i can troubleshoot small things just from learning myself through trial and error like a mower and atv's but not a truck to much new tech packed into all these new vehicles! LOL
@@chopsfisher1622 Most school systems have done away with classes that teach trades and mechanical skills. It’s a shame. The people running things think everyone will go to college or the military instead of working with their hands.
Thank You for Sharing, Very much Appreciated as I'm having same issue.
It would be nice IF Only the Animal Attractant was left out of the wiring insulation mix, maybe add a bitter root blend to repel them critters.
Successful mission again JC. Somebody will be interested in that camper, looks like it's got a lot of life left in it.
Glad you didn't have to bite the bullet and replace the TIPM!
Have a fun and safe 4th with your family and friends!
I know you're selling it but towing a RV with a regular Fifth Wheel (Semi Type) is not a great idea as you lose to side to side pivot. This can cause extra torque on the Fifth Wheel's Pin Box. If you're only towing a short distance, you should be fine but you "might" do some damage on a longer tow. Now, I know years ago this is how ALL Fifth Wheel Hitches were made but we all know that over the years they have been making the frames on those trailers as cheap as possible. Great video on troubleshooting, thanks for showing it from beginning to end. It takes patience to troubleshoot, which most don't have. Thanks for all of the great videos and please keep the coming!
i am using this truck to move this camper down the road to another property i own. i understand what your saying....but it wont affect this move.
Iv run into a few of these with pin fitment issues (hotdog down hallway). I have also repaired a few TIPM that had corroded pins. Just run wire where pin goes inside TIPM
Crap! Mice!
I literally just found a mouse nest in my glove box last week. No joke. I drive the truck every day. They collected the insulation on the firewall and made a nest. Little bastards were in the hvac too. Put a glue trap in and caught one. My biggest worry was them eating wiring in the dash. Seriously concerned with that. Reference my previous comment about canbus. Imagine mice in the dash eating up wires. Ugh
Would Love to see some more off that International Loadstar that thing is Excitingly Cool !
Which wire? I wished you would have shown more on the tipm plug
Sweet deal man! Glad I could be of some assistance!
Mind sending me the pin location?
Son of a gun. Isn't that just the way it goes. But you did well backing up and start from the beginning again. That could have been a real head scratcher.
Some times it sux to do and i dont like to but some times u just gotta run you a new wire ...i have got lucky and found wire broke inside the insulated part it just pulled apart but its a pain some times..specially on a school bus with multiplex
My 03 dodge fried a tipm after booking up a friends trailer. I lost the passenger side turns and tails on the truck only. Never did get it fixed because apparently you have t9 go to the dealer to ave them reprogram a new one after install. And I hate dealers. On my 2013 ram, I swapped the 68rfe trans for a g56 6 speed. You wanna talk about crazy wiring. The can bus system in these trucks are crazy. Mine is a Laramie so it has the fancy touch screen stereo. Took a lot of doing to get my backup camera to work again.
03-04 didn't have tipm supposedly. I have an early 04. It has a fcm and a fuse box. It's supposed to be not as sensitive as the tipm. I think they started the tipm in 05 or 06. I haven't had any trouble yet with the trailers I've pulled but we'll see.
Awesome man I have the same issues I will check my harness !!
Wow at the wire behind the tipm
Nice hot shot road tractor you have there.
You sound like Jeff Daniels
Man nice video any chance you share the schematic. I have similar issue
Anyway could tell me the color code on those wires. I’m having the same issue
That's strange there is no power coming out of the connector for the flash
The dreaded mouse nest
Great video JC
Is that JAYCO made in Australia? Factory is near us in 1 Jayco Drive Dandenong Victoria Australia. Jayco caravans, (read trailers in USA), are a very common choice Down Under.
no they are made in indiana
Beautiful truck! (at least what I could see. The dually is all I'm missing on my 2011. 4x4 6.7 Cummins. quad cab leveled, a damn nice truck but just not a duall Where is the connector to check the lights? You didn't mention that. i've got the left/driver side giving me problem
Good repair
hey jc johthan out of Baltimore how do u feel about the new international cv light to mudiem duty trucks they look like dura max but its the same thing sterling did with dodge please reply thanks
Every time I plug in a crap trailer harness I blow the fuse for the trailer lights. It's annoying and expensive for a fuse
replace the fuse with a circuit breaker.
Nice job, need more videos lol
Good catch
Waal-There's your problem lady - Sorry-wrong channel !
excellent reference to my buddy eric!
Hey J.C. how does one contact you regarding truck sales? Thanks, George
I got the same question? Might as well give my money to somebody get a decent honourable person.
Trailer defenitly pitched up quite a bit
I had a 2012 ram, tipm went out twice got rid of it
Could have been worse had that mouse chewed more.....
cant add comments
RATS I hate RATS