did you take both resonaters off but keep stock cats and muffler? I would really like to know becuase I am trying to get a resonater delete on my 2008 mazda 3 2.3L.
To each his own I wouldn’t do it to an auto but since my Mazda 3 is manual it sounds good lol I paid like $52 for res delete while I was getting my hangers welded on cuz they were all rotted or missing I didn’t have to do it myself and was cheap still lol and the car sounds nice
Way more fun with the 6 speed though =D I got a 2010 Mazda 3 GT Hatchback, love that car! I might consider doing this... I mean, even the stock exhaust sounds pretty decent, but a little more bark never hurt anyone! you find any change in performance?
hey! I have the 5 speed but ive never driven the 6. Im sure it would be fun. And honestly it could just be a placebo effect but i honestly believe it adds some gains or atleast allows for a more efficient engine because its got 160k miles yet its faster than some of these scions trs, hondas, toyotas (under 200hp cars). Its so torquie and my brother drives a $60k benz and says the mazda is def not as fast but its a lot more responsive on the pedal and its fun! but definately wont beat a FRS or a SUBI, atleast not stock.
also! if u remove any, id say remove most restrictive first (if u want loud) and leave resonator on. I removed muf and res but cat is still on and i want more UMPH. But then ill probably be getting police attention
so was the piece that you got from the muffler shop also a 2inch? did you slide it over to original pipe or did you just sit it up flush with the cut if that makes sense
hey ya the one i got from the shop was 2 inch and it sit flush with the old one. The 2.25 didnt allow it to seal properly. I would say if ur gonna do it make sure u have a perfect fit the first time so u know u made it worth while!
Awesome! I removed my resonator too! And put in a straight pipe! One question though where did you get your rear muffler tails from? Trying to find good custom rear end muffler tailpipe.
Hey I got them from a local muffler shop they were like 20 bucks each haha alittle overpriced but they're bigger than the old ones and look way better haha
@@Richy.R6 hahaha It sounds really aggressive men! If it's not too much trouble bro, will you have a photo of the way you put the tubes when you made the muffler delete? I would like to see the shape you made to the tubes to take it to my muffler workshop and show them the picture if they can do exactly the same way as yours, I really liked how it sounds haha, greetings from mexico bro 🇲🇽
@@Richy.R6 I don’t know if you’ll see this but could you show me what your muffler delete looks like bc I want to do this but I just knew it wasn’t only the resonator that you took off. Or show me how you did the muffler delete and install.
good question. Ive read somewhere that mine had two has well but when i get under there i dont see a second one, just the muffler i cut off, the resonator i cut off and the CAT. Unless im mistaking the CAT for Resonator #2. if you have a firestone in your area, take ur car for a $10 vehicle inspection (which is good to do anyways) and when they have the car lifted, ask them where ur resonators are. they should be more than happy to help.
@@Richy.R6, yeah idk the first time i looked at it i was SO confused, cause i saw a cat in the engine bay behind the exhaust manifold than two more behind that and its just two resonators. thanks anyways tho
You have two cats; one built into the exhaust headers and the second one is somewhere in the middle of the exhaust. My 2006 Mazda 3 has that set up from the factory.
honestly, this car can be loud but not loud enough to piss off a cop at low rpm. I removed the muffler and resonator. if i could id start over id remove cat then muffler since those are the most restrictive. But then itd be louder probably enough to annoy a cop
So someone cut off my resonator thinking they were stealing my cat; I found on ebay a cat/resonator for 130 bucks is this the correct part to replace to fix the issue? I have to pass my emissions for NY and I wanna make sure before I order the part.
I would order an oem resonator bc in NY all cars must have mufflers and cannot allow sound levels higher than 15 decibels more than the ambient sound in which the vehicle is being driven I got that off the internet so I hope that helps and that’s just playing it safe. If you want to make your car sound better do it
Do you feel any HP loss? I did the same , but i did cut out the catalyc too , replaced with glass pack. Now it feels like its pulling slower than before and sounds like a frying pan 😂
I have a a stock Mazda 3 sp25 , I wanna make my car loud but not toooo Loud what should I do , btw my cars looks exactly like yours haha same colour tinted windows same wheels
For anyone who knows I was wondering if I just drilled holes into my resonator will it still give me the sound of a resonator delete I also have a muffler delete with a $40 aftermarket Spec-D exhaust welded on?
@@jonesvaughn8946 if it sounds good then great, but just be aware that straight piping is fun but you will get annoyed by the rasp and how loud it gets. The most you’ll get is maybe a “pop” but it’s not even a pop. Id recommend gettin a catback system in the long run. Assuming you own a Mazda3, Corksport would be a great place to start
@@paoc.1599 LOL I own a shitty 2007 Chrysler Sebring 2.4l 4 cylinder that you literally can't find anything for it aftermarket wise besides exhaust that's universal
@@paoc.1599 But like I said previously I already have a muffler delete with a spec d exhaust welded on and trying to do a resonator delete now to see if it makes the car sound louder and better combined with the muffler delete
Which car do u have? And is that the only delete u have? I also removed my muffler ! When I had only my muffler removed it was louder but not nearly enough
Only way to throw a code with exhaust is to cut the cat out thats being monitored. You can delete the second cat all the way back without tripping anything
@@Richy.R6 I have a 2.5 swap 1st gen non turbo yet. The 2.5 is stronger than the 2.3 with slightly bigger rods and slightly thicker block but you’d need the speed 3 transmission to hold that power. I think the regular trans can hold 8-10 pounds before it blows
It sounds like it's going Hella fast, but us mazda 3 owners know the truth. Lol 😆
Lmao yes sirr
exactly this, I have a 3 hatch and even though I like the exhaust with the manual, I know I ain't going anywhere, lol!
I have the sp23 and mine pulls well
😢😢😢
@@louisbarningham sp23 is definitely slept on. Makes me not so sad I don’t have a speed lmao
"These got free returns so just use them and then return them" I'm dead 😂😂
I be doing that one time old guy got mad at the parts store cause I was tryna return something left went to another part store and returned it 🤣🤣
Egghaust sounds pretty dam good 💪
"This is where the saw started to bend" uhhh no you just didn't cut straight my guy 😂😂
Maybe you're right lol
Please do a video about the ecu system on this mazda year 2010💯💯
did you take both resonaters off but keep stock cats and muffler? I would really like to know becuase I am trying to get a resonater delete on my 2008 mazda 3 2.3L.
@1:54 egg sauce. eggs tossed up.
I have muffle delete it sounds good but deep, should I take off the resonator as well? I want it louder
To each his own I wouldn’t do it to an auto but since my Mazda 3 is manual it sounds good lol I paid like $52 for res delete while I was getting my hangers welded on cuz they were all rotted or missing I didn’t have to do it myself and was cheap still lol and the car sounds nice
Glad to hear that! And ya it def would sound great in manual I think of that all the time haha
What engine
Way more fun with the 6 speed though =D I got a 2010 Mazda 3 GT Hatchback, love that car! I might consider doing this... I mean, even the stock exhaust sounds pretty decent, but a little more bark never hurt anyone! you find any change in performance?
hey! I have the 5 speed but ive never driven the 6. Im sure it would be fun. And honestly it could just be a placebo effect but i honestly believe it adds some gains or atleast allows for a more efficient engine because its got 160k miles yet its faster than some of these scions trs, hondas, toyotas (under 200hp cars). Its so torquie and my brother drives a $60k benz and says the mazda is def not as fast but its a lot more responsive on the pedal and its fun! but definately wont beat a FRS or a SUBI, atleast not stock.
also! if u remove any, id say remove most restrictive first (if u want loud) and leave resonator on. I removed muf and res but cat is still on and i want more UMPH. But then ill probably be getting police attention
Can you do this with no other preference mods?
I have a Mazda 3 2.5L 2010, what is the outer diameter of the pipe I will be needing to run down where I cut?
Just cut out my muffler on my mazda.. nice slides mine are black. Freaken clouds bro
Glad to hear that bro!
Ayyyyooo ? 😳 I live by the block too , maybe we can link up with our Mazda’s 🤧 but just know that I have a Mazda 3 2.3 sedan 🙃
Hey whatsup bro! My Mazda has been out of commission cuz of the common TCM issue but hit my Instagram im always down to meet ppl! @therealriichy
so was the piece that you got from the muffler shop also a 2inch? did you slide it over to original pipe or did you just sit it up flush with the cut if that makes sense
hey ya the one i got from the shop was 2 inch and it sit flush with the old one. The 2.25 didnt allow it to seal properly. I would say if ur gonna do it make sure u have a perfect fit the first time so u know u made it worth while!
I need too do this
worth it!
Does it give a check engine light after that?
broski I gotta know, where did you get those blue accessories for the dash?
Hey! Its a blue satin vinyl wrap i found on Amazon. I believe its vivid vinyl wrap. It was $10-$15 and def worth it.
Awesome! I removed my resonator too! And put in a straight pipe! One question though where did you get your rear muffler tails from? Trying to find good custom rear end muffler tailpipe.
Hey I got them from a local muffler shop they were like 20 bucks each haha alittle overpriced but they're bigger than the old ones and look way better haha
What if i just cut out the resonator and just leave it with no pipe for a little bit?
finna make my 06’ mazda 3 s gt a lil louder soon
can you make a update video? its been almost 2 years
It sounds nice men! I have the same car and I want to do something similar, you also deleted the muffler right?
Yes I deleted the muffler as well. You'll like it :) its already starting to feel too quiet again LOL
@@Richy.R6 hahaha It sounds really aggressive men! If it's not too much trouble bro, will you have a photo of the way you put the tubes when you made the muffler delete? I would like to see the shape you made to the tubes to take it to my muffler workshop and show them the picture if they can do exactly the same way as yours, I really liked how it sounds haha, greetings from mexico bro 🇲🇽
@@Richy.R6 can I drop you a message on IG? you would help me a lot! :)
@@Richy.R6 I don’t know if you’ll see this but could you show me what your muffler delete looks like bc I want to do this but I just knew it wasn’t only the resonator that you took off. Or show me how you did the muffler delete and install.
first or second resonator? on my first gen i have a cat, 2 resonators and a muffler idk if its the same for a second gen
good question. Ive read somewhere that mine had two has well but when i get under there i dont see a second one, just the muffler i cut off, the resonator i cut off and the CAT. Unless im mistaking the CAT for Resonator #2. if you have a firestone in your area, take ur car for a $10 vehicle inspection (which is good to do anyways) and when they have the car lifted, ask them where ur resonators are. they should be more than happy to help.
@@Richy.R6, yeah idk the first time i looked at it i was SO confused, cause i saw a cat in the engine bay behind the exhaust manifold than two more behind that and its just two resonators. thanks anyways tho
You have two cats; one built into the exhaust headers and the second one is somewhere in the middle of the exhaust. My 2006 Mazda 3 has that set up from the factory.
Nobody pointed out how he said egg zaust? Lmao
Did you dip your wheels black?
hey! i sprayed painted them with some gloss black rustoleum, unfortunately, i didn't spray a wet enough clear coat so they lost that gloss finish :/
What size engine
What diameter size was the pipe the the muffler shop made for you ?
Hey! I believe it was 2.0 flat!
Im scared asff I got a 2007 2.3L Mazda 3 and IDK what exhaust mod i should get
honestly, this car can be loud but not loud enough to piss off a cop at low rpm. I removed the muffler and resonator. if i could id start over id remove cat then muffler since those are the most restrictive. But then itd be louder probably enough to annoy a cop
Did you do a muffler delete as well?
Yea! This had a muffler delete before this one.
What muffler is on it
So someone cut off my resonator thinking they were stealing my cat; I found on ebay a cat/resonator for 130 bucks is this the correct part to replace to fix the issue? I have to pass my emissions for NY and I wanna make sure before I order the part.
I would order an oem resonator bc in NY all cars must have mufflers and cannot allow sound levels higher than 15 decibels more than the ambient sound in which the vehicle is being driven
I got that off the internet so I hope that helps and that’s just playing it safe. If you want to make your car sound better do it
Is the resonator delete the only mod on your entire exhaust?
Hey! I have a muffler delete as well.
should i remove the catalytic converter next?
Do you feel any HP loss? I did the same , but i did cut out the catalyc too , replaced with glass pack. Now it feels like its pulling slower than before and sounds like a frying pan 😂
Hey! Maybe its the glass pack? I actually feel a slight increase in power but that can also just be in my head. The dyno has the answers!
No way. For a full resonator delete? Thats awesome. They charge like $180 in CA
Thats great to know. And Maybe u can try selling it and leaving the resonator delete.
I have a a stock Mazda 3 sp25 , I wanna make my car loud but not toooo Loud what should I do , btw my cars looks exactly like yours haha same colour tinted windows same wheels
For anyone who knows I was wondering if I just drilled holes into my resonator will it still give me the sound of a resonator delete I also have a muffler delete with a $40 aftermarket Spec-D exhaust welded on?
You’re gonna get a CEL if you do that
@@paoc.1599 I did it and didn't get a check engine light but I'm going to have it cut off and put a straight pipe in its place
@@jonesvaughn8946 if it sounds good then great, but just be aware that straight piping is fun but you will get annoyed by the rasp and how loud it gets. The most you’ll get is maybe a “pop” but it’s not even a pop. Id recommend gettin a catback system in the long run. Assuming you own a Mazda3, Corksport would be a great place to start
@@paoc.1599 LOL I own a shitty 2007 Chrysler Sebring 2.4l 4 cylinder that you literally can't find anything for it aftermarket wise besides exhaust that's universal
@@paoc.1599 But like I said previously I already have a muffler delete with a spec d exhaust welded on and trying to do a resonator delete now to see if it makes the car sound louder and better combined with the muffler delete
What year mazda
Is there problems with the cat converter
Hey no there isnt!
@@Richy.R6 oh ok I was reading that when you straight oipe newer cars the sensors and converter and shit gets outta wack from back pressure
i did a resonator delete but my car doesn’t sound nearly as loud as yours, i’m confused
Which car do u have? And is that the only delete u have? I also removed my muffler ! When I had only my muffler removed it was louder but not nearly enough
Is there a muffler at the end or no?
No muffler and no res!
where you get you’re interior wrap from?
Hey! On Amazon. I couldn't find it anymore to reorder some but Satin Blue Matte I believe is the name
@@Richy.R6 okay thank you. could you privately message me. i got some questions
im ngl res and muffler deletes only make it sound nice at idle but when you get going or get on it, its just overwhelmingly loud and raspy asf
Get a vibrant
@@sheaintknowima-slizzy what is a vibrant? i googled vibrant and the only thing that came up were vibrators💀💀
did it throw a code?
Only way to throw a code with exhaust is to cut the cat out thats being monitored. You can delete the second cat all the way back without tripping anything
@@chickenfixn4439 thank you
Never tripped any codes right?
No codes! :)
Resonator is in the intake system not the exhaust
I don’t think so
You gotta speed 3 or just 3
Just 3. Its the 2.5l so I'm hoping a turbo could make more than the speeds 2.3. Not sure though 🤔
@@Richy.R6 I have a 2.5 swap 1st gen non turbo yet. The 2.5 is stronger than the 2.3 with slightly bigger rods and slightly thicker block but you’d need the speed 3 transmission to hold that power. I think the regular trans can hold 8-10 pounds before it blows
Nice! I'm happy to hear that. Itd be really cool to see ur build! Got an Instagram?
@@Richy.R6 yes sir just followed you
@@Richy.R6 oh nooo. It's the 2.5l. I have the 2.0l lol 😆 now I'm back to wondering what mine would sound like.
Original paint contact Mazda. Give them your licence plate number. And they match the paint for u
How much kms you have
Hey! Not sure what KMS stands for :/
@@Richy.R6 he means miles
Do you have 2 resonator?
Hi no, its a catalytic converter, a resonator, and a muffler however I removed res and muffler. Cat is still on
Two cats, one resonator, and one muffler.
The cut didn’t come out straight cause you used a ryobi 😂
Those damn ryobi’s 😂
@@undergroundpromotionz7343 woulda come out straight if he used a Milwaukee😂
Eggshaust
How to commit fraud and turn your Skyactiv into a lawnmower
at ur own risk lmao. i dont have the skyactiv but those engines are super cool.