Building the Ultimate Mazda 3 for 2 years in 21min

Поделиться
HTML-код
  • Опубликовано: 30 авг 2023
  • Building the Ultimate Mazda 3 Skyactiv in 21min
    In this episode we'll go through the complete build process so far of the Mazda 3 Skyactiv!!
    Thanks for Watching!!
    If you want to follow the thread I made for more information about the Cx-5 transmission swap: www.mazda3revolution.com/thre...
    Where I got my bushings: siberianbushing.ca/
    ___________________________________________________________________________________
    Want to stay updated on what I'm doing behind the scenes?
    Check out my website: drivingproduction.com
    Check out my Instagram & Facebook page:
    @drivingproduction
    ___________________________________________________________________________________
    Here are some Amazon Affiliate links to some of the products I've mentioned in the video or used to make this video. By clicking them you're supporting the show, and helping me create more content at no extra cost to you.
    U.S. Links:
    Rear Motor Mount: amzn.to/3O0YWtO
    Hood Struts: amzn.to/3rQpof4
    "HKS" Grounding Kit: amzn.to/3uGowLJ
    21-765C AEM Cold Air Intake: amzn.to/3nSSAA2
    KIMISS Universal Shift Knob: amzn.to/3ACXoRC
    Noico 80 mil sound deadening: amzn.to/3yyIGIV
    Stop Tech Braided Brake lines (Front): amzn.to/3ABDmah
    Stop Tech Braided Brake lines (Back): amzn.to/3aqIp2u
    Blue Burnt Exhaust Tip: B08BFGMGNL
    SEALIGHT H11 LED (Low Beam):
    Fahren 9005/HB3 LED (High Beams):
    LUYED 2 X 1700 Lumens (Reverse Light): amzn.to/3PeZnj9
    LUYED 2 X 900 Lumens (Signal + Brake Light): amzn.to/3nUbxCg
    VViViD Yellow Headlight: amzn.to/3yvedLB
    Canada Links:
    Rear Motor Mount: amzn.to/44XihmwHood Struts:
    Hood Struts: amzn.to/3T7ptHm
    "HKS" Grounding Kit: amzn.to/3RlGDQN
    KIMISS Universal Shift Knob: amzn.to/3RspGEC
    Noico 80 mil sound deadening: amzn.to/3AH0R1K
    Stop Tech Braided Brake lines (Front): amzn.to/3IuiovL
    Stop Tech Braided Brake lines (Back): amzn.to/3bXaUoR
    Blue Burnt Exhaust Tip: amzn.to/3AFmH5B
    SEALIGHT H11 LED (Low Beam): amzn.to/3yX4oI0
    Fahren 9005/HB3 LED (High Beams): amzn.to/3Rqu7zo
    LUYED 2 X 1700 Lumens (Reverse Light): amzn.to/3nRB7YJ
    LUYED 2 X 900 Lumens (Signal + Brake Light): amzn.to/3nUvyJc
    VViViD XPO Golden Yellow Headlight: amzn.to/3RqZU3e
    Caliper Paint Red Metal Cast: amzn.to/3OVJRJ3
    Here is the link for the Mazdaspeed brake bushings:
    damondmotorsports.com/product...
    Here is the link for the Mazda3/Mazda5 brake bushings:
    damondmotorsports.com/collect...
    My Camera Gear:
    U.S Links:
    Nikon D3200: amzn.to/3uGjT4j
    GoPro Hero5: amzn.to/3yws7gp
    Lapel Mic: amzn.to/3PiBCXy
    Canada Links:
    Nikon D3200: amzn.to/3OT1jhs
    GoPro Hero5: amzn.to/3nTWxnW
    Lapel Mic: amzn.to/3PciRou
    Where I get the Royalty Free Music for the videos:
    artlist.io/Driving-1567032
    Thanks for the Support!!!
    DISCLAIMER:
    Driving Production videos are for entertainment purposes. Don't perform any modifications on your vehicle that will void your warranty or violate local laws. I assume no liability for damage on your vehicle, property or injury as a result of any of the information contained in this video. Use the information provided at your own risk.
  • Авто/МотоАвто/Мото

Комментарии • 94

  • @infowazz
    @infowazz 4 дня назад

    I have a 2007 and the rear engine mount upgrade to Corksport made a huge difference. The manual shifting is silky smooth and it even has a bit more growl to it. Totally changed the car.

  • @samueljames7329
    @samueljames7329 5 месяцев назад +6

    Mannn you are a legend.. I have a 2012 skyactiv GT with 147k now, I've done some work on her myself but not even close to the level you're going at. Really inspiring to see all that you did by yourself, I hope to make mine as good as yours someday.

    • @DrivingProduction
      @DrivingProduction  5 месяцев назад

      Thanks man! That's great keep up the mods! I've been moding this platform for years to get to this point! 👍

  • @Castro88ification
    @Castro88ification 4 месяца назад +2

    Great video, really enjoyed iCe modification as it progressed, just picked one up 2 weeks ago 08 already making my list. Been a automotive tech for years, now the Mazda gets my sole attention . Seeing it all from the floor let's me know so much on this little Mazda. Again great video 👍

    • @DrivingProduction
      @DrivingProduction  4 месяца назад

      Thanks! I'm glad you liked the video and that it helped you for your build! I do love the look of the 08 a lot more, and pretty much all the suspension stuff I did is pretty much the same on the first gens. 👍

  • @GarrySugabo
    @GarrySugabo 8 месяцев назад +22

    It’s a MazdaSkyactivSpeed3

  • @alexandreveret5915
    @alexandreveret5915 Месяц назад +2

    Celestial Blue ! Still in love with my Mazda 3 since 2015 ! Amazing color and car !

    • @DrivingProduction
      @DrivingProduction  18 дней назад

      Yes!! I love this blue so much too! Looks awesome! Thanks for sharing!

  • @BillerProductions
    @BillerProductions 8 месяцев назад +3

    Beautiful video bro well done 🤝🏾 Love the build

  • @owenathanael
    @owenathanael 9 месяцев назад +6

    Great build!

  • @jennysaad1783
    @jennysaad1783 9 месяцев назад +2

    Outstanding video! Wow

  • @slacker_DIY
    @slacker_DIY 5 месяцев назад +1

    You're super-gutsy to try to swap transmissions just to see if they would fit. Hats off to you! I just picked up a stock 2013 Mazda 3 sport auto in Forida. It's been declared salvage not once, but twice. At least the underside has zero rust.

    • @DrivingProduction
      @DrivingProduction  5 месяцев назад

      Thanks!! Since it's a pretty niche platform there's not too much information on swaps like this so I just had to take a gamble and it all worked out in the end! Twice salvage is cray, but still having no rust on the car would make it soo nice to work with!! 👍

  • @user-uz7pf3lh7d
    @user-uz7pf3lh7d 2 месяца назад +1

    Your skills are very good. This MAZDA3 must be happy.Comment from Japan🇯🇵

    • @DrivingProduction
      @DrivingProduction  2 месяца назад +1

      Arigatō! Thank you very much! I appreciate the support!

  • @SoyHeisenberg
    @SoyHeisenberg 19 дней назад +1

    Me encanta te ha quedado brutal.
    Un saludo desde España, Great built

  • @farrandhey7931
    @farrandhey7931 Месяц назад +1

    incredible!

  • @luisgerardonunez4940
    @luisgerardonunez4940 13 дней назад +1

    Levanta el animo ver el contenido buen video el carro te quedo excelente 👌

  • @pompmaister2438
    @pompmaister2438 2 месяца назад

    I'm screaming at this!

  • @narasimhamanadiar
    @narasimhamanadiar 2 месяца назад +1

    Bravo👏

  • @arteymanoschile
    @arteymanoschile Месяц назад +1

    Buen video!!!

  • @AngelOfHonor
    @AngelOfHonor 6 месяцев назад +3

    This video is great! I have the same car and I would love to mod at least half of what you did.
    I wonder where did you learn how to take out each and every part out and change/replace it?
    I found no guides on net.
    Btw, how long it took you to do all of this?
    Wonderful job, bro! Love the car!

    • @DrivingProduction
      @DrivingProduction  6 месяцев назад

      Thanks!! I really appreciate your feedback! I bought this Mazda 3 in January 2022 and have been building it since then. Before that I had the same Mazda 3 (white) but in Auto that you can also find on the channel, and I was building that chassis before this one. Most of the stuff I learn along the way to do, I have been working on cars since before I had a license haha and I love learning new things and how cars work. Thanks again! I really appreciate the support! 😃

  • @ismaelguerracastro7902
    @ismaelguerracastro7902 6 месяцев назад +1

    Would you recommend changing the bushings in already installed parts? I have changed some suspension parts recently and they started to get damaged but i don't want to buy in new.

    • @DrivingProduction
      @DrivingProduction  5 месяцев назад

      If they're still in good condition I would. The main reason I didn't do that was because of the amount of rust on my previous components. But if you changed them recently should be good to just replace the bushings! 👍

  • @FlipBoji
    @FlipBoji 9 месяцев назад +1

    Minty video! 10/10, so what's next?

    • @DrivingProduction
      @DrivingProduction  8 месяцев назад +1

      Thanks! Happy you liked it! There's always more mods to do! There's the Speed 3 I need to finish , and new platforms to come! 👍

    • @FlipBoji
      @FlipBoji 8 месяцев назад

      @@DrivingProduction check out motordrivegroup sams midnight purple 2014 Mazda 3. It’s pretty sick and the best mod imo is his steering wheel. Definitely worth witnessing

  • @warguster
    @warguster 6 месяцев назад +1

    Que buen trabajo

  • @claudionavarro6188
    @claudionavarro6188 5 месяцев назад +1

    Hola espero te encuentres bien, disculpa donde conseguiste los bujes de poliuretano para la suspensión los amarillos

    • @DrivingProduction
      @DrivingProduction  5 месяцев назад +1

      Hola, de aquí conseguí los casquillos : siberianbushing.com/

  • @davidynamix496
    @davidynamix496 4 месяца назад +1

    Hey man, can you please tell me where did you get the wing from? Im looking for a mazdaspeed wing for my mazda3 and i can t find anything.

    • @DrivingProduction
      @DrivingProduction  3 месяца назад +1

      I got it from a local junkyard, but I see them pretty regularly on FB Marketplace for Mazdaspeed part outs.

  • @jesseceee2495
    @jesseceee2495 7 месяцев назад +1

    where did you get the ground kit? i can only find info on 1st gen mazda 3

    • @DrivingProduction
      @DrivingProduction  7 месяцев назад

      There's a link in the description you can go check out. 👍

  • @peterlee3825
    @peterlee3825 7 дней назад +1

    I maintained my 12 Speed3 by myself too and did a lot of jobs on it. Compared with yours my jobs seems tiny😅the most difficult one for me was to remove the trans to replace the clutch. What's your wheel model? That looks awesome on our 3

    • @DrivingProduction
      @DrivingProduction  6 дней назад +1

      That's great! You get to learn a lot about your car when you do all the work on it. In this video I had some NC mx-5 Special Edition wheels, they are 17x7 +55 so I was running 25mm spacer front and 35mm in the back. Now I'm running a set of Koning Hypergram. 👍

  • @DevonteSV
    @DevonteSV 9 месяцев назад +2

    What throttle body would you use for a non sky activate 2.0?

    • @DrivingProduction
      @DrivingProduction  8 месяцев назад +1

      I'm not sure if you can use the TB from the 2.3 or 2.5 MZR engine and if they are upgrades for the 2.0, but I would look into that if I were you. 👍

  • @solomoncosta
    @solomoncosta Месяц назад +1

    Where did you find that spoiler? Ive been looking for a Mazdaspeed3 spoiler for my skyactive forever.

    • @DrivingProduction
      @DrivingProduction  18 дней назад

      I was fortunate to find one in a local junkyard, but I see them all the time on FB marketplace in Mazdaspeed part outs

  • @mrlebaneseboss
    @mrlebaneseboss 9 месяцев назад +1

    💪🏽

  • @diegopena3663
    @diegopena3663 3 месяца назад +1

    Where did you get that radio? I’ve been looking for one with analog volume, and here I only find touch buttons and that sucks!!!

    • @DrivingProduction
      @DrivingProduction  3 месяца назад +1

      Yes I feel the same about the touch screens! That's why I went with this one, unfortunately I think Eonon discontinued this model as I don't see it on their website anymore.

  • @mannyorozco842
    @mannyorozco842 4 месяца назад +1

    Mine isn’t nearly as cool as this but I’m on my journey to install everything I can find on my 2012 Skyactiv. So far:
    2.5 GT wing
    Speed3 rear sway bar
    Speed3 axle back and bumper
    2.5 sideskirts
    Speed3 red stitch arm rest and shift boot
    Ford focus electric rear motor mount
    Window visors
    2.5 throttle body
    Coming up:
    Turn signal mirrors
    Fog lights
    Heated seats from a 2.5

    • @DrivingProduction
      @DrivingProduction  3 месяца назад

      That's awesome! I'm sure it looks great!! Keep it up!

  • @czesio12323
    @czesio12323 2 дня назад

    what are these wheels?

  • @adrianhiguera115
    @adrianhiguera115 4 месяца назад +1

    Hello, I hope you can help me, I am in my project with my standard Mazda 2.5 and I would like to know if the speed transmission fits my 2.5

    • @DrivingProduction
      @DrivingProduction  3 месяца назад

      If you have the MZR 2.5 the Speed transmission bolts up, you just need a Mazdaspeed clutch/flywheel plus the shift cables. I think you might need a few other things, but it's been done before there's information on the forums about it.

  • @thomassavage8016
    @thomassavage8016 Месяц назад +1

    I looked at that cold air intake and it’s no longer available/instock and I looked all over Amazon and I couldn’t find one like that for the same price. Any suggestions?

    • @thomassavage8016
      @thomassavage8016 Месяц назад +1

      Also love the videos. Super helpful since I have a sky active too😂

    • @DrivingProduction
      @DrivingProduction  18 дней назад

      Thanks! I'm glad you enjoyed the video!! Yes unfortunately they don't make them anymore, I was lucky to find one used maybe look on eBay on used listing or on FB Marketplace. Or custom make one with piping from another intake. Hope this helps! 👍

  • @user-fl2jw4nl8v
    @user-fl2jw4nl8v 4 месяца назад +1

    Bue video. 100 puntos

  • @raypanzer521
    @raypanzer521 3 месяца назад +1

    en el minuto 1, porque le pusiste tantos cables tierra ?. trabajo espectacular amigo

    • @drizzy9572
      @drizzy9572 3 месяца назад +1

      I think the connected some wires from headlights and fog lights then connected it to battery

    • @DrivingProduction
      @DrivingProduction  3 месяца назад +1

      I made 2 video about it, you can check it out here: ruclips.net/video/3G-Fjj96Si4/видео.html

  • @Fleant
    @Fleant 8 месяцев назад +1

    The rim are 17" from mazda mx5 ?

    • @DrivingProduction
      @DrivingProduction  8 месяцев назад +1

      Yes they are off a 2012 Mazda Mx-5 Special Edition

  • @louprimo6062
    @louprimo6062 Месяц назад +2

    All that work and a check engine light is lite up? Do you know the cargo space on the Mazda 3 is smaller on the 2nd and 3rd generation hatchbacks versus a 1st gen? I have a 1st gen looking to upgrade to a 2nd or 3rd gen Mazda 3?

    • @DrivingProduction
      @DrivingProduction  18 дней назад

      Yes 😅 the CEL was on because of a small evap leak that came on and off. For cargo space 1st & 2ng gens are pretty close as they are based off the same platform, the 3rd gens are as big but you loose in height because the hatch is more curved then the other ones. 4th gens are the smallest hatch overall.

  • @LEARNER-yr9ix
    @LEARNER-yr9ix 6 месяцев назад +1

    Any link to the spoiler or what spoiler is it? Pls

    • @Andreas_Bo
      @Andreas_Bo 6 месяцев назад +1

      MPS Spoiler

    • @DrivingProduction
      @DrivingProduction  6 месяцев назад

      It was a used spoiler from a Mazdaspeed 3 that was in a local junk yard

  • @matijurga8948
    @matijurga8948 Месяц назад +1

    where does this rear spoiler come from?

  • @kl3_v1ssss58
    @kl3_v1ssss58 8 месяцев назад +2

    how much money have you spend for this mazda?

    • @DrivingProduction
      @DrivingProduction  8 месяцев назад

      Great question! I'm not quite sure at this point, I would say in the $4000-$5000 of mods.

  • @danytouch6023
    @danytouch6023 9 месяцев назад +3

    Why did you remove the antenna just to bondo the hole and sanded the roof down, repainted the entire thing the same color and then wrapped it black? 😂

    • @DrivingProduction
      @DrivingProduction  8 месяцев назад +2

      I figured that if I ever removed the wrap it would be blue like the car, but it was also one of those moments when I asked myself why did I paint it and not just wrap it like you said 😅😂

  • @kendvasquez7226
    @kendvasquez7226 9 месяцев назад +1

    Whaoo is perfect you Job..

  • @psix1607
    @psix1607 Месяц назад +2

    Зачем менять руль, тем более от предыдущего кузова, там много не понятного

    • @DrivingProduction
      @DrivingProduction  18 дней назад

      в основном на вид руль BL Mazda 3 выглядит не очень, поэтому и поменял

  • @gerosanu94
    @gerosanu94 4 месяца назад +2

    a lot of rust on those cars :( im thinking to buy one, but when i see the rust..

    • @DrivingProduction
      @DrivingProduction  3 месяца назад

      I know it get's bad where I live really quickly with the salt on the roads.

  • @Muelb
    @Muelb 5 месяцев назад +2

    Nice content, but don't get wash your engine.

    • @DrivingProduction
      @DrivingProduction  5 месяцев назад

      Thanks!! It just make the engine bay cleaner and nicer!

  • @duckbutt5335
    @duckbutt5335 4 месяца назад

    Ah yes a speed 3 with the power of ½ speed 3. Looks great but i dont understand the time, effort and money put into it.

    • @mannyorozco842
      @mannyorozco842 4 месяца назад +4

      It’s a great DD with at least twice the reliability and fuel economy.

    • @mannyorozco842
      @mannyorozco842 4 месяца назад +3

      Also most of them have not been beat to hell it’s easy to find a good Skyactiv example with low miles for cheap.

    • @DrivingProduction
      @DrivingProduction  3 месяца назад +1

      Like mention in the other comment, it makes for a great DD, it's been rock solid reliable and get amazing gas mileage. . . on the other hand my actual Speed 3 had 0% of the power my Mazda 3 makes because it has a blown engine like most Speed 3 😆😂