Hey I know that this sounds goofy to say but I'm really proud of you for doing such a good job with your car. I'm sure that you're an inspiration to many.
I have same mazda 3 as my first car, i own it for about 2 months, and i find your videos so uplifting for me, you cant imagine how glad i am that i found your channel and now i will watch your every video about mazda3, thank you for everything you do!
The MX-5 club wheels look great on that body. I was happy to see someone else utilize that wheel. I have both a club and a Mazda5, and I put the club wheels on the 5 for this look. Factory-plus!
Thanks!! I love these wheels too! it's funny you say you have yours on your Mazda 5 as they are also going on my Mazda 5 since I got new wheels for my Mazda 3 since this video!
Nice, I'm currently refurbing some NC Miata 5 spoke forged wheels for my Mazda 3 as well! I added some roof bars for my bike, yellow fog light tint and wind deflectors. I got a steering wheel wrap on order, and reupholstered and re-foamed my leather driver's seat. I plan on adding some small mudguards, and plan on painting my brakes. I can't find any Mazdaspeed spoilers anywhere, but that'll probably be my last mod, along with adding some undercoat to the wheel wells for sound deadening.
I just got a 2013 Grey Mazda 3. I wondered if you have any starter recommendations on what to modify/work on. I don't have a big budget and its for daily driving so I need bang for the buck. I was told replacing the stereo is a good option. I'm thinking about shocks to help with the ride, or something to help with noise on the highway. And maybe just maybe redoing the paint. But I definitely can't do all of that. Thoughts or suggestions?
One mod that is super cheap is installing a grounding kit, I made 2 episode on it, the Mazda 3 seem to be very responsive to it. Upgrading your radio is a great idea too Eonon makes some that plug and play. And if you look on the use market you can probably find some cheaper suspension components, that's how I did it! Hope this helps! 👍
Thanks man! My current set up is a Mazdaspeed 3 mid pipe and a 2.5 Muffler, and it still doesn't pop it's fairly quiet. I think you can get a crackle tune from Versa Tuner to really get the car to pop, but it can be hard on the stock cats.
Hey just wanted to know when you wrapped your spoiler how did u completely pull that center part of the spoiler apart where the brake light is attached? Is it just the 2 screws that hold it down?
@@DrivingProduction sick I'm going too. I have a speed as well. Decent engine makes good power but it looks like stock dog shit so I'm definitely interested in checking that out.
Coming from a fellow speed3 owner but not all of us want a turbo car lol I’d totally get the regular 3 just to make it look nice without the whole AP, tuning, blown turbos and scarce marketplace for parts 🥲
Hey I know that this sounds goofy to say but I'm really proud of you for doing such a good job with your car. I'm sure that you're an inspiration to many.
Thanks! It means a lot!! I really appreciate it!! 👍
he sure is because mazda axelas is the car i am hoping to get for my first car
I have same mazda 3 as my first car, i own it for about 2 months, and i find your videos so uplifting for me, you cant imagine how glad i am that i found your channel and now i will watch your every video about mazda3, thank you for everything you do!
Thanks! I'm happy you're enjoying the content! It means a lot! 👍
The MX-5 club wheels look great on that body. I was happy to see someone else utilize that wheel. I have both a club and a Mazda5, and I put the club wheels on the 5 for this look. Factory-plus!
Thanks!! I love these wheels too! it's funny you say you have yours on your Mazda 5 as they are also going on my Mazda 5 since I got new wheels for my Mazda 3 since this video!
@@DrivingProduction I just seen the newer video with the wheel update. Show your 5 when its fitted!
i.postimg.cc/L6t9r7PV/20231010-122207.jpg
For sure! My 5 is the same color! What are the odds!!
man you've done everything I ve ever wanted for my 3😄 you're so crafty, respect!
Haha Thanks! Now you can do it on your Mazda 3! 👍
Wow! That Mazda 3 looks sick. Definitely inspiring!
Thanks! Happy you like it! 👍🏻
12:48 bro just woke up and said "im gonna creat a mazda3 hot-hatch commercial" 😂🔥
Right?!? 😅😂👍
Some great detailing! I Like the rims and Goodyears too, good job man.
Thanks! Means a lot! It took a lot of effort!
I'm over here in Quebec and contemplating getting a MS3 sooner or later. Wish I knew someone to take me on a ride. Great work on the car!
Thanks man! Hope you can get you Mazdaspeed 3 soon!!
It’s werird because you have engine and hood from the gen one but interior if gen 2
Awesome video dude! Inspired me to start doing some similar things to my own Mazda 3 😁
Thanks!! I'm happy the video inspired you! 👍
What a beautiful video!! So proud of you ❤️
Thanks! 😁
@@DrivingProduction 🤗🤗🤗
Nice, I'm currently refurbing some NC Miata 5 spoke forged wheels for my Mazda 3 as well! I added some roof bars for my bike, yellow fog light tint and wind deflectors. I got a steering wheel wrap on order, and reupholstered and re-foamed my leather driver's seat. I plan on adding some small mudguards, and plan on painting my brakes. I can't find any Mazdaspeed spoilers anywhere, but that'll probably be my last mod, along with adding some undercoat to the wheel wells for sound deadening.
Thanks awesome! Your Mazda 3 is gonna look great when it's all done!
Wow you killed it on the make over cant wait to see you start the next project keep it up
Thanks man! Defiantly working hard to get content out with some new projects!
Always love the videos
Thanks! I really appreciate the support!! 👍
Super clean mazda 3 mods bro, I’ve basing my mod journey off yours. Question: did you every get lean issues with your CAI or has everything been fine?
Thanks! I really appreciate it! For the CAI I never got any issues, no CEL, the car runs great with it!
Loving your videos. They give me so much inspiration for my 2012! Do you need to repaint the rear bumper again in the future?
Thanks!! I'm happy you're enjoying the content!! I haven't needed to repaint the rear bumper it's still holding up well. 👍
Well done 🤘
Thanks man!! Means a lot! 👍
I know that this video is a year ago but i just wanna say that this mazda looks so great!!
Thanks!! I really appreciate that!!
I just got a 2013 Grey Mazda 3. I wondered if you have any starter recommendations on what to modify/work on. I don't have a big budget and its for daily driving so I need bang for the buck. I was told replacing the stereo is a good option. I'm thinking about shocks to help with the ride, or something to help with noise on the highway. And maybe just maybe redoing the paint. But I definitely can't do all of that. Thoughts or suggestions?
One mod that is super cheap is installing a grounding kit, I made 2 episode on it, the Mazda 3 seem to be very responsive to it. Upgrading your radio is a great idea too Eonon makes some that plug and play. And if you look on the use market you can probably find some cheaper suspension components, that's how I did it! Hope this helps! 👍
What inch were these wheels?
They are 17inches off of a 2012 Mazda Mx-5 Special Edition
Love thr mods u do on the mazda i have the same mazda 3 bro can u tell me what i have to change on the exhaust to make it pop
Thanks man! My current set up is a Mazdaspeed 3 mid pipe and a 2.5 Muffler, and it still doesn't pop it's fairly quiet. I think you can get a crackle tune from Versa Tuner to really get the car to pop, but it can be hard on the stock cats.
Hello i have a questions did you cut a second hole in the bumper for the exhaust?
Yes I did! you can see the full video about it in previous episode with this car
what color of your rear bumper? is that black or dark grey? beautiful
Thanks! It's dark grey!
Hey just wanted to know when you wrapped your spoiler how did u completely pull that center part of the spoiler apart where the brake light is attached? Is it just the 2 screws that hold it down?
Hey there's either 2 or 4 bolts they're hidden by some foam ovals you need to peel off to access them 👍
Cool job, i like it
Thanks!
@@DrivingProduction i got myself a mazda speed 3 too
Where did you get the valve cover breather filter and what size did you use ? Keep up the great content
Thanks! I just got it off amazon, it's a 3/8 hose size. I just put a link in the description of exactly what I got 👍
You should be using an oil catch can rather than a breather.
Does a 2013 Mazdaspeed 3 bumper fit on a 2013 Mazda 3 i trim hatchback?
Yes it does! Bolts right up!
Tryna do mine up like this but idk if I can afford to spend anymore...
Took me a few years to get to this point on this platform it takes time but you'll get there! Keep it up! 👍
Awesome!
Thanks! 👍
hey we got the same car may I ask where do you get your mazda speed 3 spoiler
Hey I got it from a local junkyard
do mps part fit some of the car?
Yes for sure! A lot of parts a interchangeable!
I want my Mazda 3 to look like this I have a 06 2.3 same color
That's awesome! I do love the look of the first gens, you don't see them in that blue to often! I'm sure your car is going to look great!! 👍👍
Where do you get the kit for the breather filter for egr
Hey I got it off Amazon the link is in the description 👍
Wow, how did the engine bay get dirty like that… ??? Did it sink or something?
That's what I asked myself when I bought the car haha 😅
Is this the mps?
No it's a 2.0 Skyactiv Mazda 3 👍
Bro just buy a mazdaspeed...
Already have one 😅 you can go check out those videos if you prefer the speed3
@@DrivingProduction sick I'm going too. I have a speed as well. Decent engine makes good power but it looks like stock dog shit so I'm definitely interested in checking that out.
Coming from a fellow speed3 owner but not all of us want a turbo car lol I’d totally get the regular 3 just to make it look nice without the whole AP, tuning, blown turbos and scarce marketplace for parts 🥲