A lot of people in the comments asking about how to locate gear. Keep an eye on these aggregators: www.reddit.com/r/gundeals gun.deals/ And a couple of non-pump vendors TopGunSupply.com (our lovely sponsor) PrimaryArms.com And probably stay away from the scalp fest on Gunbroker. Feel free to recommend other non-scammy sources below.
It wouldn't surprise me z thst you have people in the DOJ, the administration, Democrats and their minions, going online, to these sites, looking at what people are doing or buying. Then, they ante up the next bill.
Psst: Those are sanctions and every president uses them. And it's only a few countries, and it expires. Might need to look up the definition of ban. Try searching trump or reagan, since they're the only presidents that have ACTUALLY banned anything....
@@kingarthurj Couldn’t they just arrest you for obstruction of justice? I’m not exactly sure how things work for you over in the US but if you tried that in the UK, they’d use it as an excuse to stick you in prison and make sure that you never get a gun license again.
@@geesusway70 Thankfully we're in America. The home of the free because of the brave. Plus I live in Mississippi. You can literally walk around with a gun out in the open and it's not illegal.
@@Sun-Tzu- a polite society, Is a well armed one. On a side note, most "mass shootings" as they're called, take place where guns are prohibited. Namely schools, churches and office buildings. Because the perpetrators are absolute cowards.
@卐Suj卐 well.......yeah. it's just bait & switch on a large scale, causing an incident that helps your argument by bringing emotions into it. People tend to do VERY stupid things when emotions are involved.
“Probable cause” and “reasonable suspicion” have been twisted to benefit LEO. And thanks to Odumba, we can all be detained without a trial. Funny that cops now say you’re “being detained” and not “you’re under arrest”, in certain situations.
@@robinderoos1166 I know thats my point they dont need to go door to door, they can do it legally and if you ever had to use it in self defense it will be too expensive to fight in court.
I’ve been through too many of these “Buy Now” events myself...and each time I’m madder that I didn’t buy a gun shop years ago...Great Video,! Great INSIGHT!!!
I'm in Jersey too bro. Our gun shop shelves are still full. If you got an FID card you can get most of items. A quick trip to PA and you can the rest lol
Yup. If you slow down the video you can see Brandon’s shadow holding a gun pointed at a James. It so evident by the shadow of his hair blowing when the fan hits him. I always said never trust a commie.
@@notsure7874 oh he’s not a commie at all. He just likes a weapon platform but it is always fun to break his stones. Russians took old pots and pans and smashed them into a world renowned weapon that a monkey can shoot. They deserve some credit for that.
@@OttoTheWeim No doubt! They both break each others balls over their weapon platform of choice - it's hillarious! Before I lost mine in a tragic boating accident, I called mine my "commie gun" - and I've considered making a lower cast out of aluminum cans and other scrap aluminum. What's funny about the "ak's are easilly built with hand tools and scrap metal" thing, is that an AR is actually EASIER to build and shoot - especially when making it out of scrap metals, or recycled plastic. Even though I hated the AR I was ready to actually throw in a deep lake - they're both excellent platforms. A toast to Mikaihl and Eugene!!!!
@TRUTH _ Sadly I believe you are right. Like pigs being led to the slaughter. Without a commanding and influential leader...there is no duty of resistance.
As a quick note before this video airs to head off questions re: H.B. 127 - it was introduced on Jan. 4 and has no co-sponsors, and has not been scheduled for committee. While it does include a provision for confiscating hundreds of million of magazines that exceed 10 rounds in capacity, it's probably not going anywhere. As mentioned in the video, the purpose of today's discussion is to operate under an assumption of what is more likely to occur, not to consider every possibility of what *could* occur. That isn't to say the threat of confiscation is not real, just unlikely compared to regulatory approaches.
James....you're going to get blowback from the pandering, fear mongering, fake patriot guntubers like Mrgunsandshill, Gunsnandgadgets and a few others whose only business model is to lie and say anything to sell more shirts and hoodies.
The battle has been brewing over the 2nd Amendment of the U.S. Constitution for years and it's directly linked to politicians and people in positions of power not taking their oath seriously. Every single time that unconstitutional gun control legislation is proposed, "We The People" should not have to feel the urgency to contact them (legislators) in order to remind them of their oath. The fact that we do, sickens me to my core. The 2nd Amendment is very clear, and its purpose has and always will be a bulwark against tyranny.
And it doesn't help that traditionally the gun lovers in this country have been utter retards. Like with Reagan and the NFA shit. It's only recently that gun owners have started to move away from stupidity
Also I got a Zastava m70 for a little less than 1200 in January. The same rifle on gunbroker is now $1700+, so yeah, you may be late to the party, but definitely be sure to get one now if you can afford it.
1. Foreign made AK-type rifles, though generally any foreign made rifle/braced pistol 2. Pistol carbine (your crush), threaded barrels, etc. If you're waiting, get them before they're banned 3. OEM Factory made 9mm Glock Magazines over 10 rounds (maybe better 33 round high cap mags) 4. AR15 stripped lowers 5. AR Mags
Been picking up $9 gen 2 Pmags every time I go into my local gun shop, even if I'm just looking around. It's a great way to support your local stores without breaking the bank, and having bins full of unopened Pmags is almost like sitting on gold.
I have a “healthy” collection but I recently brought “pistols” with a brace and I have them in 5.56, 7.62, and 9 millie......I’m good! Thanks Fam for the upload.
I live in Canada and now they proposed a legislation to ban all hand guns and airsoft guns. AIRSOFT GUNS (TOY GUNS)! To my fellow Americans just know they don't just stop at AR-15s...
Well, Castro Boy just made it happen. Effing libs. Can we just truckerize his a$$ right now? No handguns, period? This might be rise up time, for real...
Our country, U.S.A., was founded on the idea of overthrowing a tyrannical government as the founding fathers had to do. Can you imagine trying to do so nowadays? We'd be labelled "terrorists" and tortured in Guantanamo. Our founding fathers would be disappointed in the greedy corporate leaders we've got today.
@@Ishmari half of the country is scared of their own shadow and completely reliant on their government for protection and peace of mind. Edit: wed not only be labeled domters by our government but by half of our braindead "countrymen" too.
@SPQR - So you have you illegally converted your rifles to full-auto? Have you put stocks on your SBRs without registering? If you haven’t done either of these, you are complying.
You will comply, maybe just not in the way you're thinking - your freedom to fall in love with and buy that cool new gun will be forcibly restricted. In other words what you have now is what you will have (hopefully). All new guns will be neutered down to comply whether you want it or not. Future gun choices will all be sad reminders of what once was.
@@beareble-lion4446 well yeah I mean there will always be a black market but if you want to be law abiding and buy your new gun at a licensed store (as most people will want to do) your option will be to comply. This is what you mean right?
@@Antonio.Aguilera Maybe ... but I think they learned their lesson with the '94 AWB. No more grandfathering, no more sunsets. And I think they believe they have the power to shove whatever they want down our throats (which they do since they control the house, senate, whitehouse and if they need to they can start packing the courts ... and with Dominion by their side they don't have to worry about what the voters think).
I just recently bought a clean S&W model 10-7 revolver for $325 from my favorite local gun shop. I know it's not on "the list" of items mentioned in this video, but it was a "crush" I've always had, so I snapped it up. Years ago I took the Thunder Ranch revolver course, had a ball & never felt under-gunned with a revolver (or two, or three).
@@fenomeno71 it's out at a shop getting the barrel cut down to 14.5", the brake pinned and welded to make it 16" overall (for legal reasons), a Jmac combo gas/front sight block installed, a Galil mag release and the lower handguard retainer removed since I'm using a semi-free floating handguard from SLR Rifleworks.
Look imma come out and say what we all are thinking if its gonna be a felony to own my guns I'm breaking out the drill press because fuck it it's also a felony
Asinine in so many ways. People in NY said the same thing when the SAFE Act was passed "Oh, well fuck it I'm gonna put on a folding stock now." No. All you're doing is being the felon that they SAY you are. You own a legal firearm today. Tonight you go to sleep. Tomorrow they pass a law declaring the gun illegal. wrong. You've taken no action to violate the law. Who took action? Congress. Who's violating the law (Constitution)? They are. If we're going to win, its going to be by taking the high road, not by stooping to their level and being criminals.
@@docholliday3666 seriously, I've lived here since Dinkins when this place was that 70s trope of violence that one finds today in Chicago or Detroit. It isn't as bad rn but Giuliani cleaned up this place to a point where one could have considered raising kids here. That's even with very anti-gun policies. This place is just a joke. I blame the constituents but we all ready know that. 😔
An honorable mention would be a 3d printer. An ender 3 knockoff is about 150$ and can print lowers all day long. Yes, reliability is iffy depending on what the print conditions are, but with the printer you can always have more
@Katarina Love katarina all lives matter, the same way a black white brown turquoise do too. You want to know the truth? Separation creates segregation, and separating by color for various agendas is literally our historical problem. Why don’t you think outside the box? Let your generation be the first to realize racism stems from our own drive to separate ourselves.
Yes my first “assault rifle” I bought 3 months ago was a wasr10 because I knew this was going to happen! Glad to know I made the right choice according to TFB TV
@@unashamedly1776 negative. levers are a symbol of american heritage and freedom. over the last several years many have had quality control issues making older ones even more valuable. some hold many rounds, some,have detachable magazines, some are in excess of their planned caliber cut off limit.... not as many being made, less manufacturers, less younger people wanting them, theres plenty of reasons they will continue to rise.... scarcity is inevitable. govt intends to ban them aswell.... the call on that will occur when you hear the term "assassin pistol" in reference to a revolver, anything 5 shots or more will be hammered on. so no 4+1 or more tube fed levers...... if you comply.
@@unashamedly1776 straight walled cartridges will be sought after the most, easiest to reload and brass keeps longer due to less stress. ive got my share, but do continue to try and prepare, train, plan and,educate others buy ammo..... import bans are coming and could be anytime.
Hey, Canada here. When Captain Sparkle Socks banned AR15s here, he also banned uppers. That's right, we can't transfer / sell the upper receiver as part of the AR15 ban.
Home 3D printers can't make furniture without secondary machining, let alone internals. Unless you are making a fire it once and watch it blow up in your face like Brandon Herrera. 3D printers melt plastic to make items out of multiple layers of barely bonded strands with non stress relieved final parts. Prototypes sure, functional AND durable? Not even close yet.
@@privatelisting366 I totally concur with your point that not everything can be simply 3D printed and function right out of the gate (or hot plate, I guess). However, this wasn't my point. As some have pointed out, you can still print lowers and other components that are quite functional. Otherwise, to the point of secondary machine, especially where metal parts are necessary, do that as well. Particularly with jigs and tools you can print or make yourself, expensive lathes and mills are no longer a must for some components (e.g. see "electrochemical machining", 3d printed 80% jigs, etc.). And when calling out people in favor of 3d printing, keep in mind it's an evolving concept, and most importantly, they're ON YOUR SIDE in preserving and democratizing 2A. ✌🤙🖖
That's dumb they're gonna make private sale illegal and no shop is gonna pay that much. Goodluck selling it when it's banned. Your cellmates are waiting
All the manufacturers he listed are completely out of stock on lowers. The 80% ones you find are just to get you on a list. The ATF will visit to explain why.
@@privatelisting366 I purchased several 80% lowers because I couldn't find any registered lowers in any gun ship, not even super overpriced ones. I hate how when I go on the internet to research stuff, people tell me not to go with 80% lowers because a completed lower costs just as much. It's like, have you seen the shelves?
@@sartorialdriver6528 hmm interesting. I purchased a $40 Anderson lower from primary arms about a month ago, although I had to wait awhile for them to restock it u can still find cheap lowers out there if you have a lot of patience lol.
@@thegoodnewsguy1315 My LGS charges $65 for FFL fees, not to mention shipping, the next best FFL is an hour away. I really don't have the patience to wait on companies to restock and then go through an FFL when I can just order an 80% and drill it out.
I remember during the 94 awb, the prices of magazines initially skyrocketed..... but so many companies produced warehouses of product, prices quickly fell... to being even cheaper then before the van. Weird
That's part of the reason why I made this video. During the 94 ban I bought... ProMags. I think I paid around $40 a magazine for my Ruger p series. What a gigantic waste of money. I wanted to make this video so people won't make the same mistakes that I did.
@@tfbtv I bought a few a few months back around the election a video where you said, “better get those mags now” 😂 I lost them of course. Not sure where they are anymore 🤔
Last time I came this early was prom night, I didn't go to prom or anything I was watching TFB yt videos and caught a glimpse of James' inner thigh and came instantly
Given how most politicians regardless of party want to disarm the public (no matter what they pretend), I appreciate the mostly neutral, fact based approach here.
"Outright ban and confiscation in which case your investment would be, theoretically, worthless." Oh, I beg to differ. I think that investment would immediately start to pay dividends, along with the purchase of a copy of the DOOM Eternal soundtrack.
If you have any money left over after stocking up, give it to one of the groups fighting to preserve and restore our gun right. And write your congressmen.
@@stripervince1 NOT the NRA. GOA and Second Amendment Foundation need money. NRA doesn't do a damn thing for anyone anymore other than concede our rights away.
Better to buy some training and range time since A HUGE percentage of gun owners in America have "safe queens" they bought on a whim and then promptly stuck in a closet. "It looked so easy on TV that SURELY I will be able to operate this complex machinery to defend my life at a moments notice in potentially the most stressful moments of my life that even though I only put one magazine of ammo or less through it I TOTALLY KNOW WHAT I'M DOING..."
I know of a government agency that combs gun forum's for comments like this...I predict you will be getting a call from a certain U.S. agency soon asking about your friends " import" business.
@@gorillaump5869 serve those agents a whiff of (insert poison or potent drug dosage) and strip them of weapons, ammo, commo, duct tape them and ditch them down by the river and then disappear. Haahaa.
@@jonmcclane7433 agreed but I wanted it before they get banned. I would've preferred the mini as I think the micro's handstop looks goofy. But I'm still very pleased
@@richardbasso22 I bought one late last summer (m85) for $700. Watch GunBroker for sellers selling 5 or more examples. Sometimes auctions end while everyone is at work or asleep, and you can score a deal.
I want to thank you for your kindness and support for all of us that are trained and want to be law abiding citizens. Your insight is very valuable to me and I am sure all the other people out there like me. God Bless be safe
That’s what they are trying to do in Canada. Mini 14 and AR 15’s now prohibited and need to be registered, surrendered (bought back with our tax dollars for less than they are worth) or deactivation.
Leaving my prediction before the video starts: James will go in reverse order (5 down to 1), 5. Pistol with brace - he will show an SP5 or clone 4. Controversial pick = Polymer 80 3. Go fast device (binary) 2. Muffler (he will suggest a hybrid but showcase an integral) 1. A good old Eh Arr Fifteen
What do you think of Congress sneaking the repeal of the PLCAA ( protection against liability in commerce arms act ) in to some spending or budget bill ?
Well really that bill shouldnt have been needed in the first place. Commerce law already protects the manufacturer in literally the same way that does and selling firearms is commerce. That was done as a ploy to be able to pull it if they wanted. What they should have done was rule that manufacturing firearms is a business and therefore commerce and therefore they are protected by commerce law as much as Ford or any other business
@@Erin-bd6jg vska has s7 steel tool same stuff in jack hammer bits very durable century put several vska thru 12000 round test all ran good with good head spacing plus there 6 people on RUclips with 5000 round thru the vska with no issues
I genuinelly cannot consider "apolitical" gun channels as pro 2A I think they're just Socialist Rifle Association channels trying to not get bullied by everyone
TFB can make tactical fashion videos with airsoft weapons if they will tolerate “real looking” guns. You don’t understand how full of themselves these asshole snowflakes are now. America went full soft underbelly, and now we’re in no position to do jack to anyone.
Quit pushing “name brands”. Anderson is one of few who makes their own lowers. The same company that makes spikes tactical lowers also makes bushmaster. Knights and armalite also made by the same company.
I have zero moral delima with ending the life of an attacker whoes attack I did not instigate. Ruby Ridge and Waco had attrocities commited against them because they were defensive only, and only wished to left alone. They did not seek to destroy their attackers outright. Somebody attacks me or mine, I savor my justified response and I will use that self justification to commit attrocities back upon my attackers, ALL of them, using EVERY unethical advantage in my favor, with no mercy nor hesitation. Feds and Statists should know self justification works both ways.
Little did I know the Vepr I bought 5 years ago would be worth a shit ton in today's environment. It's also a shame it went overboard while sailing from Los Angeles to Hawaii. still heartbroken about that one....
“ *The illusion of freedom will continue as long as it's profitable to continue the illusion. At the point where the illusion becomes too expensive to maintain, they will just take down the scenery, they will pull back the curtains, they will move the tables and chairs out of the way and you will see the brick wall at the back of the theater* .” - Frank Zappa
Thank you very much for the extensive, timely information. That took a considerable amount of work on your part. With the razor wire being extensively employed in our Nation’s Capitol etc, etc, etc it is rather difficult to maintain a positive outlook for the Second Amendment. However.....
Oh man we all need to sit back and get ready for the show. There’s going to be 3-5 mass shooting per week until the Dems get their way!!! Funny how this works isn’t it?
99% of everything discussed in this video is ALREADY banned in my state: The People's Republik of Massachusetts. If more states follow the MA model, perhaps these bans will finally end up in the Supreme Court. And, hopefully, the majority of justices will have the guts to eliminate the infringements that tarnish the Constitution's 2nd Amendment.
you can blame goal for that. they literally didnt file the fucking law suit against it in time cause theyre retards and now that law will NEVER be changed as it went to court and then defaulted.
New gun guy here, I just dropped like $5,000-$6,000 on ammo and guns after Biden got elected. Bought a Staccato P DUO with 3 20rd mags, Arsenal SAM7SF, 10 30rd pmags, and a magpul 5.56 drum mag. Just need to wait on that LaRue AR to be made... If they ban any of this stuff, I'll be content with my purchases. And if not, new hobby/money pit!
Now hit the range and consult with some trainers otherwise you'll just be donating some very nice toys to whoever steam rolls you with their high point pistol caliber carbine.
I'd guess that your last point (RE. imported firearms) is a big part of the decision by CZ to purchase Colt. That gives them US-based manufacturing / assembly options, should imports be cut off.
They got slugs for Airguns from. 177 up to72 cal 550 grains hollow point slugs and every cal. In between & every grain for different calibers in between. & although prices are up ,for the lead,its cheaper & more readily available.
A lot of people in the comments asking about how to locate gear. Keep an eye on these aggregators:
www.reddit.com/r/gundeals
gun.deals/
And a couple of non-pump vendors
TopGunSupply.com (our lovely sponsor)
PrimaryArms.com
And probably stay away from the scalp fest on Gunbroker. Feel free to recommend other non-scammy sources below.
Pin this
It’s sad to see this video as a Massachusetts citizen pre ban is all we have so good luck guys get ready to pay 3000 plus for a standard basic AR-15
Very informative video. Thank you.
85,000 gun owners or more. I hope at least half would stand up to the band and take back our freedom with one freedom pill at a time.
85,000,000”
"Buy an AK before they get banned"
a few months later, Russian ammo and firearm ban from Biden... hit the nail on the head. Subbed.
Thankfully he doesn't know that Serbia and a lot of east Europe countries still make food for my AKMs
He sure doesn’t mind giving many to the taliban though !!
@@mayken6661 the sniffer in command sure made the Taliban great again…
It wouldn't surprise me z thst you have people in the DOJ, the administration, Democrats and their minions, going online, to these sites, looking at what people are doing or buying. Then, they ante up the next bill.
Psst: Those are sanctions and every president uses them. And it's only a few countries, and it expires. Might need to look up the definition of ban. Try searching trump or reagan, since they're the only presidents that have ACTUALLY banned anything....
a wise man once said "if I could be any type of criminal I would be a politician"
wise? no. diabolical? yes.
@@ultrakool true? Yes
the key word is "If"
he doesn't want to be a politician
@@WhateverItsanOpinion what drugs are you on?
@@WhateverItsanOpinion he's literally a republican I know him and his family.
all he was saying is that politicians are criminals
The name of this should've been "Top 5 Guns to Lose in A Boating Accident"
Lmao I like the way you think bro 😁👍
Does that really work ?
@@Ken-oy2ou Can't hurt to try!
@@kingarthurj Couldn’t they just arrest you for obstruction of justice? I’m not exactly sure how things work for you over in the US but if you tried that in the UK, they’d use it as an excuse to stick you in prison and make sure that you never get a gun license again.
@@geesusway70 Thankfully we're in America. The home of the free because of the brave. Plus I live in Mississippi. You can literally walk around with a gun out in the open and it's not illegal.
"Don't say gun control doesn't work, instead, ask yourself, How do I ensure it doesn't work"
Don't do any mass shootings. No need for gun control.
Remember kids, john Adam's says "f*ck the law"
@@Sun-Tzu- a polite society, Is a well armed one.
On a side note, most "mass shootings" as they're called, take place where guns are prohibited. Namely schools, churches and office buildings. Because the perpetrators are absolute cowards.
@@theforcedmeme Damn straight, Friend. Damn straight!
@卐Suj卐 well.......yeah. it's just bait & switch on a large scale, causing an incident that helps your argument by bringing emotions into it. People tend to do VERY stupid things when emotions are involved.
the real question is what guns to NOT get before a ban
ruclips.net/video/nDHN5_m9N7I/видео.html
That reply tho 🥱👑👑👑
Amen to that! I want ALL of them! 🇺🇸🌲🇺🇸
what about ammo?
Taurus Judges, Rock Island 1911's, and Palmetto State Armory AR's and AK's are a good bet.
Buy guns? I can’t even feed the ones I’ve got because of all the panic buyers.
Seriously dude I haven’t been out in over a year
@@akarandompilot reload.
@chuck williams you guys have a shortage in the states?
@chuck williams christ lol, I don't feel like it's THAT bad here up north, but maybe less demand?
@chuck williams I know that brass for like 45-70 gov is scarce
The last time I was this early the cops still needed a warrant to touch your property.
You can always sue them afterwards I guess!!? But yea first we have to hand over our shit..
“Probable cause” and “reasonable suspicion” have been twisted to benefit LEO.
And thanks to Odumba, we can all be detained without a trial. Funny that cops now say you’re “being detained” and not “you’re under arrest”, in certain situations.
@@wildone106 the courts are corrupted by libtards...
@@robinderoos1166 I know thats my point they dont need to go door to door, they can do it legally and if you ever had to use it in self defense it will be too expensive to fight in court.
@Master Catnip Yea yea everyone says that..but really..who would??! Its more hassle than its worth..(they think)
Luckily James’ low capacity shorts likely will still be allowed.
That would be a federal crime not to allow them.
James does like talking about his big gun(s).
I mean, can you blame him and his Short Shorts of Florida Freedom?
You mean high capacity 😏
10lbs of nutz stuffed into a 5lb sack.
be quite, if Joe and his team of morons here about it they will surely ban it!
I’ve been through too many of these “Buy Now” events myself...and each time I’m madder that I didn’t buy a gun shop years ago...Great Video,! Great INSIGHT!!!
Me: Laughs in NJ because none of this is applicable to me.
Me: ....cries in NJ.
I'm in Jersey too bro. Our gun shop shelves are still full. If you got an FID card you can get most of items. A quick trip to PA and you can the rest lol
@@tyshawnnorwood6281 lol bro I go to PA to get 30 rounds lmaoo
@@tyshawnnorwood6281 but if you don’t mind where in jersey you at?
I left new Jersey for Tennessee, was happy for a few months, now i am sad again.
@@edwardguillen4381 Jersey Shore. Once this ban goes thru the entire country becomes NJ lol. Its all gonna be illegal.
They got James! The real James would never put an AK as number 1 on his priority list!
Brandon Herrera got to him!!! :D
Yup. If you slow down the video you can see Brandon’s shadow holding a gun pointed at a James. It so evident by the shadow of his hair blowing when the fan hits him. I always said never trust a commie.
@@OttoTheWeim Idk if he's a commie. The one thing socialism ever made that works - and they hate it!
@@notsure7874 oh he’s not a commie at all. He just likes a weapon platform but it is always fun to break his stones. Russians took old pots and pans and smashed them into a world renowned weapon that a monkey can shoot. They deserve some credit for that.
@@OttoTheWeim No doubt! They both break each others balls over their weapon platform of choice - it's hillarious! Before I lost mine in a tragic boating accident, I called mine my "commie gun" - and I've considered making a lower cast out of aluminum cans and other scrap aluminum.
What's funny about the "ak's are easilly built with hand tools and scrap metal" thing, is that an AR is actually EASIER to build and shoot - especially when making it out of scrap metals, or recycled plastic.
Even though I hated the AR I was ready to actually throw in a deep lake - they're both excellent platforms. A toast to Mikaihl and Eugene!!!!
When tyranny becomes law, resistance becomes duty.
Absolutely
@TRUTH _ absolutely true
My guy, odds are you don't know what tyranny looks like.
@TRUTH _ Sadly I believe you are right. Like pigs being led to the slaughter. Without a commanding and influential leader...there is no duty of resistance.
@TRUTH _ absolutely spot on analysis
As a quick note before this video airs to head off questions re: H.B. 127 - it was introduced on Jan. 4 and has no co-sponsors, and has not been scheduled for committee. While it does include a provision for confiscating hundreds of million of magazines that exceed 10 rounds in capacity, it's probably not going anywhere. As mentioned in the video, the purpose of today's discussion is to operate under an assumption of what is more likely to occur, not to consider every possibility of what *could* occur. That isn't to say the threat of confiscation is not real, just unlikely compared to regulatory approaches.
No bans. Just buy more guns, ammo and mags. Let's get 1 billion guns in America 🇺🇸
remember to stay away from "parkerized shit sticks" - James
@@PYRO200055412 that means, the Americans will own all guns that are in the entire civilian market!!
James....you're going to get blowback from the pandering, fear mongering, fake patriot guntubers like Mrgunsandshill, Gunsnandgadgets and a few others whose only business model is to lie and say anything to sell more shirts and hoodies.
Thanks for the info bro
The fact that we have to “fight” for a god given and supposed to be protected constitutional right makes me furious.
The battle has been brewing over the 2nd Amendment of the U.S. Constitution for years and it's directly linked to politicians and people in positions of power not taking their oath seriously. Every single time that unconstitutional gun control legislation is proposed, "We The People" should not have to feel the urgency to contact them (legislators) in order to remind them of their oath. The fact that we do, sickens me to my core. The 2nd Amendment is very clear, and its purpose has and always will be a bulwark against tyranny.
And it doesn't help that traditionally the gun lovers in this country have been utter retards. Like with Reagan and the NFA shit. It's only recently that gun owners have started to move away from stupidity
I mean... *Checks the history month* Yeah...
Nearly every right has been a "fight" in U.S. history. The price of freedom is eternal vigilance.
@@YippeeKiYayMrFalcon Well said.
Also I got a Zastava m70 for a little less than 1200 in January. The same rifle on gunbroker is now $1700+, so yeah, you may be late to the party, but definitely be sure to get one now if you can afford it.
Shit. I got an M70AB2 years ago, like slightly over a decade, for around $700.
1. Foreign made AK-type rifles, though generally any foreign made rifle/braced pistol
2. Pistol carbine (your crush), threaded barrels, etc. If you're waiting, get them before they're banned
3. OEM Factory made 9mm Glock Magazines over 10 rounds (maybe better 33 round high cap mags)
4. AR15 stripped lowers
5. AR Mags
Very cool of you Bro!
Thank you!
Not all heroes wear cape.
Been picking up $9 gen 2 Pmags every time I go into my local gun shop, even if I'm just looking around.
It's a great way to support your local stores without breaking the bank, and having bins full of unopened Pmags is almost like sitting on gold.
$9 where do you live? Average price where I live is 13
I have a “healthy” collection but I recently brought “pistols” with a brace and I have them in 5.56, 7.62, and 9 millie......I’m good! Thanks Fam for the upload.
As a New Yorker, id like to welcome y'all to the fight.
From Die Hard: Welcome to the party pal!
"Y'all"? Is that South New York?
@@budlewis721 is just me being lazy to spell " you all" lmao. Also south New York is Staten Island/ Brooklyn. Absolutely no legal firearms there lol
I live in Canada and now they proposed a legislation to ban all hand guns and airsoft guns. AIRSOFT GUNS (TOY GUNS)! To my fellow Americans just know they don't just stop at AR-15s...
What about air soft sports? Can’t do that anymore?
In Australia they banned airsoft and then gell blasters too lol
Airsoft? How brain-dead. Truly evil folks running these former countries
Well, Castro Boy just made it happen. Effing libs. Can we just truckerize his a$$ right now? No handguns, period? This might be rise up time, for real...
damn Im feeling for you now man this comment sprung to real life a couple days ago.
What ever you can get hands on now: is what you better buy!!!! Wake up America!!!!
No. America is about Freedom. Like the Freedom to choose..exactly what firearm I wanna buy
“Fuck!”
-James Reeves 2021
Oo
That bleep was the most useless bleep out ever. I don't know if that was intentional but it gave me a good chuckle.
🤣😂 i like how "fuckin" wasn't bleeped at all
Oops
Gotta embrace the op for some failure training. Was that a 5.56 or a 5.45 mag?
@@brandonrupp5880 pretty sure it was a 556 kinda thought that was a questionable move to use that as proving “unreliable” as mags
I see even USA is starting to choke itself out of it's own freedom
Starting? They have been doing it since the 80s. We were just lucky and had a take of fresh air for a few years. Now back to usual.
That's cause there are so many sheep in this country....baah baah
Unfortunately as a united states citizen that is completely true. Biden and his commie buddies are tying to take our rights and erase our history
Our country, U.S.A., was founded on the idea of overthrowing a tyrannical government as the founding fathers had to do. Can you imagine trying to do so nowadays? We'd be labelled "terrorists" and tortured in Guantanamo. Our founding fathers would be disappointed in the greedy corporate leaders we've got today.
@@Ishmari half of the country is scared of their own shadow and completely reliant on their government for protection and peace of mind.
Edit: wed not only be labeled domters by our government but by half of our braindead "countrymen" too.
Gun bans, yeah ... I will not comply.
They will simply have MS-13/Antifa burn your house down with you in it.
@SPQR - So you have you illegally converted your rifles to full-auto? Have you put stocks on your SBRs without registering? If you haven’t done either of these, you are complying.
You will comply, maybe just not in the way you're thinking - your freedom to fall in love with and buy that cool new gun will be forcibly restricted. In other words what you have now is what you will have (hopefully). All new guns will be neutered down to comply whether you want it or not. Future gun choices will all be sad reminders of what once was.
@@growlikethewind5788 lol nope drug war proves other wise.
@@beareble-lion4446 well yeah I mean there will always be a black market but if you want to be law abiding and buy your new gun at a licensed store (as most people will want to do) your option will be to comply. This is what you mean right?
Its so cute that you think the coming bans are going to have any grandfathering clauses.
Well, the first wave of bans will. That's how they'll sucker people in
Pretty logical conversion in here so far.
@@Antonio.Aguilera Maybe ... but I think they learned their lesson with the '94 AWB. No more grandfathering, no more sunsets. And I think they believe they have the power to shove whatever they want down our throats (which they do since they control the house, senate, whitehouse and if they need to they can start packing the courts ... and with Dominion by their side they don't have to worry about what the voters think).
It's not about grandfathering. It's about being a lot harder to take something you already have rather than finding something that is discontinued.
we can dream.
I just recently bought a clean S&W model 10-7 revolver for $325 from my favorite local gun shop. I know it's not on "the list" of items mentioned in this video, but it was a "crush" I've always had, so I snapped it up. Years ago I took the Thunder Ranch revolver course, had a ball & never felt under-gunned with a revolver (or two, or three).
Carpe all them Diems.
*low five*
Just bought my first AK (ZPAP M70) last weekend for around 1000 and couldn’t be happier with it.
Their great man. Mines out getting the barrel chopped and converted right now. Shits taking forever to get back sadly.
Love my ZPAP... congrats... buy as much ammo as you can for it!
@@Jonbmx666 Can you explain further please?
@@fenomeno71 it's out at a shop getting the barrel cut down to 14.5", the brake pinned and welded to make it 16" overall (for legal reasons), a Jmac combo gas/front sight block installed, a Galil mag release and the lower handguard retainer removed since I'm using a semi-free floating handguard from SLR Rifleworks.
@@Jonbmx666 Impressive. Thanks for the explanation and inspiration.
I'm still sitting on a few pre94 ban Daewoo sidefolders. AR/AK meld. These are basically Galils made in South Korea. Good stuff
Look imma come out and say what we all are thinking if its gonna be a felony to own my guns I'm breaking out the drill press because fuck it it's also a felony
Damn straight!
The forbidden third pin is calling me
opsec boys, now isn't the time to get your dog shot.
Asinine in so many ways. People in NY said the same thing when the SAFE Act was passed "Oh, well fuck it I'm gonna put on a folding stock now."
No. All you're doing is being the felon that they SAY you are.
You own a legal firearm today. Tonight you go to sleep. Tomorrow they pass a law declaring the gun illegal. wrong. You've taken no action to violate the law. Who took action? Congress. Who's violating the law (Constitution)? They are.
If we're going to win, its going to be by taking the high road, not by stooping to their level and being criminals.
@@michaelgraffam5423 except any gun law ever made is a crime under the constitution
I live in New York half of what you said to buy is already illegal😂
Here in NYC, it's not only illegal to think about everything on this list, they don't even want you to have ballistic protection. 😢
That would explain the crime
“Illegal.”
@@docholliday3666 seriously, I've lived here since Dinkins when this place was that 70s trope of violence that one finds today in Chicago or Detroit. It isn't as bad rn but Giuliani cleaned up this place to a point where one could have considered raising kids here. That's even with very anti-gun policies. This place is just a joke. I blame the constituents but we all ready know that. 😔
@@docholliday3666 amen brother
Hey James! The selection you chose was fantastic. I'm not having problems finding firearms, just ammo. It's pretty scarce in SC.
Same in GA. You can order cheap steel jacketed Tulammo online or maybe luck up and find some remanufactured by the 1000s
An honorable mention would be a 3d printer. An ender 3 knockoff is about 150$ and can print lowers all day long. Yes, reliability is iffy depending on what the print conditions are, but with the printer you can always have more
Buy lots of stuffed dogs and tannerite. 🐕 💥
Stuffed animal lives matter!
Plus 100% to atf raid confusion.
@@manictiger 🙏
@Katarina Love katarina all lives matter, the same way a black white brown turquoise do too. You want to know the truth? Separation creates segregation, and separating by color for various agendas is literally our historical problem.
Why don’t you think outside the box? Let your generation be the first to realize racism stems from our own drive to separate ourselves.
@Katarina Love and stuffed animals. Sorry forgot to add the one life that got you to comment as you did ;)
Yes my first “assault rifle” I bought 3 months ago was a wasr10 because I knew this was going to happen! Glad to know I made the right choice according to TFB TV
I picked the wrong time to get interested in lever action rifles ... I expect those to go through the roof.
same, thats why i own a diverse amoung of them in various calibers and makes.
theyve already tripled and quadrupled in value recently.
@@unashamedly1776 negative.
levers are a symbol of american heritage and freedom. over the last several years many have had quality control issues making older ones even more valuable. some hold many rounds, some,have detachable magazines, some are in excess of their planned caliber cut off limit.... not as many being made, less manufacturers, less younger people wanting them, theres plenty of reasons they will continue to rise.... scarcity is inevitable.
govt intends to ban them aswell.... the call on that will occur when you hear the term "assassin pistol" in reference to a revolver, anything 5 shots or more will be hammered on.
so no 4+1 or more tube fed levers...... if you comply.
@@unashamedly1776 straight walled cartridges will be sought after the most, easiest to reload and brass keeps longer due to less stress.
ive got my share, but do continue to try and prepare, train, plan and,educate others
buy ammo..... import bans are coming and could be anytime.
They already have gone thru the roof double in cost since I really got into them but so has S&W wheel guns
@@michaelsand4573 ive got revolvers that have 10-12x their original price.
Hey, Canada here. When Captain Sparkle Socks banned AR15s here, he also banned uppers.
That's right, we can't transfer / sell the upper receiver as part of the AR15 ban.
Captain sparkle socks 🤣🤣🤣
And why do Canadians comply with that shit? F the laws, just like the Democrats do here
@@myrtlebeachwolfman7493 AR are already registered here, it guns like mini 14, XCR and so many more were not. So easy for some, not so much for others
Lmfaooo.
“FUCK!!”
*throws mag*
Dude you’re editing is fucking awesome. Phenomenal content, I just subscribed 😁
Your*
What to get before a ban: a 3D printer. 😎
Home 3D printers can't make furniture without secondary machining, let alone internals. Unless you are making a fire it once and watch it blow up in your face like Brandon Herrera. 3D printers melt plastic to make items out of multiple layers of barely bonded strands with non stress relieved final parts. Prototypes sure, functional AND durable? Not even close yet.
@@privatelisting366 that’s not true at all. Many people have printed 80% polymer Glock frames and tested them on RUclips.
@@privatelisting366 you are SOOOooo 5 years behind in your knowledge
@@privatelisting366 I totally concur with your point that not everything can be simply 3D printed and function right out of the gate (or hot plate, I guess).
However, this wasn't my point. As some have pointed out, you can still print lowers and other components that are quite functional. Otherwise, to the point of secondary machine, especially where metal parts are necessary, do that as well. Particularly with jigs and tools you can print or make yourself, expensive lathes and mills are no longer a must for some components (e.g. see "electrochemical machining", 3d printed 80% jigs, etc.).
And when calling out people in favor of 3d printing, keep in mind it's an evolving concept, and most importantly, they're ON YOUR SIDE in preserving and democratizing 2A. ✌🤙🖖
@@privatelisting366 low IQ take
Great advice and ways to remain sane during these crazy times.
I will buy 2 FN SCAR 16, hold them until their price go up then sell 1 and keep 1 so I can have 1 for free lol
Stonks
FN SCAR 16 are overpriced and overrated.
Ur gay
Hope you've got an extra $6000.00 lying around.
That's dumb they're gonna make private sale illegal and no shop is gonna pay that much. Goodluck selling it when it's banned. Your cellmates are waiting
$36 dollar lowers? What is this, 2019?
All the manufacturers he listed are completely out of stock on lowers. The 80% ones you find are just to get you on a list. The ATF will visit to explain why.
@@privatelisting366 I purchased several 80% lowers because I couldn't find any registered lowers in any gun ship, not even super overpriced ones. I hate how when I go on the internet to research stuff, people tell me not to go with 80% lowers because a completed lower costs just as much. It's like, have you seen the shelves?
@@sartorialdriver6528 hmm interesting. I purchased a $40 Anderson lower from primary arms about a month ago, although I had to wait awhile for them to restock it u can still find cheap lowers out there if you have a lot of patience lol.
Anderson lowers are going over $100 shipped on gun broker now. How can he miss that?
@@thegoodnewsguy1315 My LGS charges $65 for FFL fees, not to mention shipping, the next best FFL is an hour away. I really don't have the patience to wait on companies to restock and then go through an FFL when I can just order an 80% and drill it out.
I remember during the 94 awb, the prices of magazines initially skyrocketed..... but so many companies produced warehouses of product, prices quickly fell... to being even cheaper then before the van. Weird
That's part of the reason why I made this video. During the 94 ban I bought... ProMags. I think I paid around $40 a magazine for my Ruger p series. What a gigantic waste of money. I wanted to make this video so people won't make the same mistakes that I did.
@@tfbtv I bought a few a few months back around the election a video where you said, “better get those mags now” 😂 I lost them of course. Not sure where they are anymore 🤔
The glock mag point was definitely something I forgot about. Thank you!
Last time I came this early was prom night, I didn't go to prom or anything I was watching TFB yt videos and caught a glimpse of James' inner thigh and came instantly
Waaaaaang
@@tfbtv your fans are weird James
I am a fan as well....
I like to get weird sometimes.
Funky
Are you a half Asian lawyer?
Given how most politicians regardless of party want to disarm the public (no matter what they pretend), I appreciate the mostly neutral, fact based approach here.
"Outright ban and confiscation in which case your investment would be, theoretically, worthless."
Oh, I beg to differ. I think that investment would immediately start to pay dividends, along with the purchase of a copy of the DOOM Eternal soundtrack.
based
Buck Joe Fiden
Auto correct?
No it's correct.
Gfffff
Yessir
Fuck Biden !!!!
Last time I was this early machine guns were legal
I'm just going to use the "that's not an autosear, that's a bedtime fun object" excuse and see how far I get
If you have any money left over after stocking up, give it to one of the groups fighting to preserve and restore our gun right. And write your congressmen.
If i have any money left over, im buying more guns. Specifically a ruger mini 30
No
@@stripervince1 NOT the NRA. GOA and Second Amendment Foundation need money. NRA doesn't do a damn thing for anyone anymore other than concede our rights away.
@@defeatignorance8681 who said anything about the nra?
Better to buy some training and range time since A HUGE percentage of gun owners in America have "safe queens" they bought on a whim and then promptly stuck in a closet. "It looked so easy on TV that SURELY I will be able to operate this complex machinery to defend my life at a moments notice in potentially the most stressful moments of my life that even though I only put one magazine of ammo or less through it I TOTALLY KNOW WHAT I'M DOING..."
I detect a small hint of Century Arms international and IO negative remarks in your #1 I agree with you.
I’ll definitely look into putting a grip on my threaded barrel
Just one thing you've missed,buy p90 mags,at least two for the gigs, you'd never want to have a kel-tec p50 with only 10 round mags.
Luckily I know a guy with over 400 Galil ARs ready to be "imported"
Hello fellow gun enthusiast, I'm totally not an ATF agent. Please introduce me to your friend for.... Research purposes
Lucky
**FBI has entered the chat**
I know of a government agency that combs gun forum's for comments like this...I predict you will be getting a call from a certain U.S. agency soon asking about your friends " import" business.
@@gorillaump5869 serve those agents a whiff of (insert poison or potent drug dosage) and strip them of weapons, ammo, commo, duct tape them and ditch them down by the river and then disappear. Haahaa.
Videos like these are the reason nobody can find $800 AKs for less than $1200.
Yep, just a week ago I spent $1175 on a century arms micro draco
@@loganwitte3477 omg bro, that’s crazy
I've been holding out for a zastava m70 zpap but cand find one with wood furniture unless i want to spend 1300+
@@jonmcclane7433 agreed but I wanted it before they get banned. I would've preferred the mini as I think the micro's handstop looks goofy. But I'm still very pleased
@@richardbasso22 I bought one late last summer (m85) for $700. Watch GunBroker for sellers selling 5 or more examples. Sometimes auctions end while everyone is at work or asleep, and you can score a deal.
One of your best videos ever! Thank you.
Let's focus on what's important here. Spring is coming and short shorts will be back soon.
Hell yeah
I want to thank you for your kindness and support for all of us that are trained and want to be law abiding citizens. Your insight is very valuable to me and I am sure all the other people out there like me.
God Bless be safe
They will only be 'grandfathered' if you register them. Once the registration is complete, then the 'grandfather' clause will become confiscation.
That’s what they are trying to do in Canada. Mini 14 and AR 15’s now prohibited and need to be registered, surrendered (bought back with our tax dollars for less than they are worth) or deactivation.
8:25 I didn’t have my contacts in. Looked like he was wearing a tactical romper. Pretty hot
Tactical short shorts😂
Leaving my prediction before the video starts:
James will go in reverse order (5 down to 1),
5. Pistol with brace - he will show an SP5 or clone
4. Controversial pick = Polymer 80
3. Go fast device (binary)
2. Muffler (he will suggest a hybrid but showcase an integral)
1. A good old Eh Arr Fifteen
Dream crush? Foreign made AK? Yes, I have a Sig 553 on order...
What do you think of Congress sneaking the repeal of the PLCAA ( protection against liability in commerce arms act ) in to some spending or budget bill ?
Oooh don't get me started on this ish
Well really that bill shouldnt have been needed in the first place. Commerce law already protects the manufacturer in literally the same way that does and selling firearms is commerce. That was done as a ploy to be able to pull it if they wanted. What they should have done was rule that manufacturing firearms is a business and therefore commerce and therefore they are protected by commerce law as much as Ford or any other business
omnibus, highly likely.
@@GUARDIAN.13 yes, theres laws regarding interfering with commerce.... those need to be researched and enforced.
camera man at 3:55 "should I even open my mouth to say anything"
"why tf am I here again?"
Trunnions made out of recycled match box cars!! 😆
Laughs in psa gf3 🥲🤣
@@Erin-bd6jg Kalashnikov USA puts out an excellent product.
@@Erin-bd6jg vska has s7 steel tool same stuff in jack hammer bits very durable century put several vska thru 12000 round test all ran good with good head spacing plus there 6 people on RUclips with 5000 round thru the vska with no issues
Yeah quit trying to justify your shiddy purchase bud vska is trash and PSA is exactly that ... PSA
When guns are banned will the show just be called “not politics”?
They are too much of pussies to do anything, just like the NRA.
I genuinelly cannot consider "apolitical" gun channels as pro 2A
I think they're just Socialist Rifle Association channels trying to not get bullied by everyone
TFB can make tactical fashion videos with airsoft weapons if they will tolerate “real looking” guns. You don’t understand how full of themselves these asshole snowflakes are now. America went full soft underbelly, and now we’re in no position to do jack to anyone.
@Jonathan Spier thanks fellow Jonathan.
No,it will be called welcome to the New World Order.
My Korean Glock 17 magazine works fine in almost anything other than my Glock 17. It Falls out sometimes.
My reaction to this new legislation 3:56
I replayed this so many times
@@bigpapi4209 Someone should make a remix out of that
@@rabbisoros7811 indeed
Specifically aero m4e1 lowers are fantastic. They use set screws instead of roll pins, which makes building much easier, at least for me
Quit pushing “name brands”. Anderson is one of few who makes their own lowers. The same company that makes spikes tactical lowers also makes bushmaster. Knights and armalite also made by the same company.
You guys realize that literally all you have to do is say no right? Check this out "we are banning these items" then we say "no". The end lol
Ask Randy Weaver how well that works.
Simplistic view maybe, but not entirely wrong. If all of you said 'NO!' at once they couldn't stop you.
I have zero moral delima with ending the life of an attacker whoes attack I did not instigate. Ruby Ridge and Waco had attrocities commited against them because they were defensive only, and only wished to left alone. They did not seek to destroy their attackers outright. Somebody attacks me or mine, I savor my justified response and I will use that self justification to commit attrocities back upon my attackers, ALL of them, using EVERY unethical advantage in my favor, with no mercy nor hesitation. Feds and Statists should know self justification works both ways.
You just repeated EXACTLY what I've been telling friends and family for a month. Thank you for summing it up in a great video.
Little did I know the Vepr I bought 5 years ago would be worth a shit ton in today's environment. It's also a shame it went overboard while sailing from Los Angeles to Hawaii. still heartbroken about that one....
its unfortunate that the GPS wasn't working at the time, or you could have given the coordinates to the ATF so they "might" retrieve it. 😉
@@Pupil0fGod Its a shame, a GENUINE shame that happened exactly like that.
Man I had all that stuff too but I lost it in a boating accident 😤
Dang bro that sucks the same thing happened to me last week
This was definitely a sad day for all of us! 😞
“ *The illusion of freedom will continue as long as it's profitable to continue the illusion. At the point where the illusion becomes too expensive to maintain, they will just take down the scenery, they will pull back the curtains, they will move the tables and chairs out of the way and you will see the brick wall at the back of the theater* .”
- Frank Zappa
Just like the truman show with jim carry
Lmao His rage quit @ 4:08 was actually pretty hilarious
@10:00 lol.i just got a cz scorpion that "I've been eye funking" a few weeks ago
I like at 10:00 the cuss word and the beep don’t quite work out.
Thats an issure with youtube not syncing just right.. Shhh go with it.
I didn't believe him but got on the wait list with Primary Arms. Just got 3 Andersons at $50 each. And 5 mags at $11 each (not magpul)
The first thing I told all my buddies when I saw the WH post, was go buy as many 33rd glock mags as you can.
Thank you very much for the extensive, timely information. That took a considerable amount of work on your part. With the razor wire being extensively employed in our Nation’s Capitol etc, etc, etc it is rather difficult to maintain a positive outlook for the Second Amendment. However.....
perfect timing as the boulder colorado shooting is heating up an assault rifle ban
Oh man we all need to sit back and get ready for the show. There’s going to be 3-5 mass shooting per week until the Dems get their way!!! Funny how this works isn’t it?
Funny thing is I think the guy used a pistol. I could be wrong but that's what I read.
@@mikeadams581 yup AR pistol
Just bought my first AR because of this. Had to jump in it otherwise who knows what’s gonna happen.
What exactly is an assault rifle?
I’m ready for those Smith and Wesson announcements 🤤
March
@@tfbtv glad February is a short month!
So....what announcement?
@@joea5222 they said they have something big to announce. M&p 10mm, pcc?? We shall see
@@koreyromanchuk663
ez shield 45
Great Vid. I like your straight up dry as fuck humor. It's totally appropriate for the times we are in!
Thanks James for always doing your very best to keep us informed
_"The weapon of your enemy is a weapon against your other enemy"_
That’s pretty dumb.
The weapons of your enemy can be picked up if working in groups.
They intend to ban, no grandfathers, no exceptions, all felony penalties. They want us all disarmed, all criminals, all slaves.
Investment would be worthless? I think you mean priceless
Well this was prophetic…
I have been picking up all the good import Ak s I could get for the last 3 months even managed to get one of the SAM5 in 5.56 .
Might consider Ruger 10-22 mags. Probably the most popular.22 lr ever made. And you can train with a .22 and save your other ammo.
Plus if someone breaks in multiple 22s wouldnt feel great
I picked up a BX-1 3-pack on flea bay for a good price.
Thank you for all your info, hard work, and knowledge. God bless
Either way now you got me wanting to go AK shopping.
99% of everything discussed in this video is ALREADY banned in my state: The People's Republik of Massachusetts. If more states follow the MA model, perhaps these bans will finally end up in the Supreme Court. And, hopefully, the majority of justices will have the guts to eliminate the infringements that tarnish the Constitution's 2nd Amendment.
you can blame goal for that. they literally didnt file the fucking law suit against it in time cause theyre retards and now that law will NEVER be changed as it went to court and then defaulted.
You're telling me no one in MA is able to sue the state and get it up to the supreme court?
New gun guy here, I just dropped like $5,000-$6,000 on ammo and guns after Biden got elected. Bought a Staccato P DUO with 3 20rd mags, Arsenal SAM7SF, 10 30rd pmags, and a magpul 5.56 drum mag. Just need to wait on that LaRue AR to be made... If they ban any of this stuff, I'll be content with my purchases. And if not, new hobby/money pit!
What's the backorder on that, Tex? 8 months?
Now hit the range and consult with some trainers otherwise you'll just be donating some very nice toys to whoever steam rolls you with their high point pistol caliber carbine.
I'd guess that your last point (RE. imported firearms) is a big part of the decision by CZ to purchase Colt. That gives them US-based manufacturing / assembly options, should imports be cut off.
Strategic brilliance
Missed that news. CZ is awesome.
Reminder: The Sig 550 series is the best imported AK
Yes but no.
It's definitely a Swiss masterpiece, especially made in Switzerland.
Lol, Not even ak or rpk patterned
They got slugs for Airguns from. 177 up to72 cal 550 grains hollow point slugs and every cal. In between & every grain for different calibers in between. & although prices are up ,for the lead,its cheaper & more readily available.