How To Clean Your Clippers & Zero-Gap | Andis T-Outliner Tutorial
HTML-код
- Опубликовано: 2 окт 2024
- Whats up everyone!
Thanks for watching the video...
Please Like, Comment, Share and Subscribe it will be highly appreciated!
Link to purchase the T-Outliners:
a.co/dU2ZB58
Link to purchase Andis Cool Care:
a.co/aLX6VW6
Follow me on Instagram: karlos2swavy
/ karlos2swavy
Facebook Page: karlos2swavy
All music in this video does not belong to me * - Хобби
I know this is old but my clips working like a champ now!! Good video. Needs more love.
Glad it helped!
Super helpful! I cut my own hair and the blade wasn't aligned anymore. Watched your video and now I'm good to go. This was perfect!
Thanks Brotha decided to clean my clippers about two year ago couldnt figure out why my blades werent cutting right (I cut my own hair) now after watching your video it was the metal piece between the two blades was not aligned properly... And now I have 0 Gap :D
This worked for me. My lining is nice and crispy.
Glad it did brotha !
Great Video! Does the Andis Cool Care prevent Rust? Should you put some on before and after each use?
joecool97 I do but its always good to open up your clippers and clean them with blade wash
Rookie question. Do you oil them before you use it or after
Hey bro my blade is kinda to the left , what can I do to center it ? I unscrewed the nut on the bottom part ( the part with the nut in the middle and two rivers on the side ) but it won’t move at all. Please let me know thanks a lot !
Mine ain't come with that little brush
Thx man this was helpful 👍👍
How did you remove the grey plastic part. Did you shave it down?
@@keilongeorge6027 I cut it with a dremel or saw
so by default , what measure is the the t outliner come in factory mode?
dick lavy don’t know the exact measurement between the cutting and stationary blades but it’s not as close as zero gapped so you have less of a risk of cutting someone the whole idea behind zero gapping is making them cut a little closer which means you will get sharper lines
@@karlosblends even than the blade is still sharp that it cuts...I guess it's why they call them t outliners,which are to outline sharp lines...and thanks for the answer,I was curious to know the exact measure. ..THanks.
Background music is awful man.....
Sorry made this video 6 years ago I wouldn’t have it that loud now 🤦🏽♂️
Didnt look like you tilted the blade much does that cut too close or is it just right? I was taught to fill mines further back.
william gunnings I get what you’re saying man, it actually has been working just fine ever since it won’t cut the client bro thanks for commenting !
What if you don't want it to be zero gapped and you want to leave it at the default factory settings?
Just leave a small gap make sure there’s some space between the cutting and stationary blade
What does Zero Gap mean?
Just My Opinion Reviews the cutting blade and the stationary blade are at the same level when the lever is closed
What’s the tool
Andis t outliner