Thanks man. I just gave my old outliner new life. I cut the top off like you showed us and did all adjustments. Now it cuts like new and looks cool. Thank you
I found that if you cut your T- Outliners off when you step back and look at the line up or every time the Trimmer comes off the clients head you can use them all day with out them over heating.
Brooooooo.... I was stuck your one comment saying make sure you put the negative screw on first before the small gold piece and positive side second saved me lol. Thanks for the detailed video!
You have really good and informative videos. I do my own line ups and sometimes cut my friend's and nephew's hair, so I am not a serious barber, but it's still good to learn from your content. I do electrical work for a living as my main job, so I have a lot of knowledge with electricity. Just FYI, those 2 wires aren't positive and negative. The black wire is the hot that gets power from the outlet, and the red is the switched hot that feeds power to the motor when the switch is on. The white would be the neutral.
@@RUclipsBarberAcademy As long as you put wires back where they came from it doesn't necessarily matter what they're called. As far as barbering I am not interested in doing it as a career. I just like to cut my friend's hair every now and then. Built-in obsolescence is why we have to keep buying new ones. They don't make things to last like they used to. I wonder what kind of degree they'd want to hire someone as a designer.
@@illestofdemall13 I have a question for you. Yesterday as I was cleaning my Andis T Outliners I somehow broke the red wire from the little metal thing that the screw is in. I don't have soldering equipment so I just stripped the wire back and wrapped it around the screw. It works again but what problems may I come across since that little piece of metal is gone that the screw originally went through? I hope I'm making sense. img.ruclips.net/user/viWaN2ifH5iF0/hqdefault.jpg It looks like what's on the end of the wires in the photo.
I know it doesn't matter, but did you notice the switch-up of the red and black wires? Just wanted to say, I really do think your channel is underrated. You may not have the expensive cameras or flashy intros, like other more popular channels, but your explanation of the fade is the best I've seen. I've known to use the corners of the clippers, but you've explained the reason why for those that don't. The little details that are hardly ever mentioned, and overlooked by the veterans, need to be taught to those coming up in the barber life. Just wanted to say thank you and sorry for the long comment.
Nail glue and floor tiles , ingenuity at its finest lol.... actually a great video, you were able to bring those t-outliners back from the dead guud sht
I just bought the new, although it has been out for a minute, cordless EVO trimmers from ANDIS. I haven’t taken them out the box yet. They are already skeltonized from the factory. They are supposed to be the bomb, from what I understand. ANDIS, in my opinion, make the best clippers and trimmers. Peace.
I have seen other videos where they mention to trim them down, so they won't get too hot, which makes more sense, you don't have to trim them down to make adjustments, they do get warm/hot in about 10 minutes
Hey RUclips Barber, Did everything you said cept for the skeleton part (which imma do) but now my tliner is leaving lines??? Is is because i set the blade on wrong? Also REALLY appreciate your Fade tutorials started on my sons a couple of months ago 👌🏽👌🏽👌🏽. Got me feelin like a barber wit all the compliments 🔥🔥🔥
Man my t outliners suuuuuuck right now!! Pulling hair so bad!! I'm gonna try this tomorrow as soon as I get to the shop!!! Praying it works because I'm ready to toss them shits in the garbage!! Lol!! Great video bruh!! Barber love from Michigan!!🍀💈🍀💈🍀💈🍀💈🍀💈🍀💈🍀
Your videos are excellent my man! Subscribed. I'm looking at a second pair of T liners and doing this modification on my older set with a fresh blade. Is the primary reason to trim them down, so you can control the tension?
I have seen other videos where they mention to trim them down, so they won't get too hot, which makes more sense, you don't have to trim them down to make adjustments, they do get warm/hot in about 10 minutes
Have you had any charging issues?? I think I need to either replace the lithium battery, the charger cord, or the charger base... but it wont hold a charge anymore after 22 months. #SUGGESTIONS??
Did the same thing to a pair of old t outliners i just bought. Cleaned them changed the blades , cleaned the switch & skeleted them . I may have gone wrong somewhere bcuz when i try to screw the case down and the pressure applies the case overlaps the designated bracket trenches and when i turn it on the case buzzes like mad. Can u recommend any fix for this ?
Been a cosmetologist for seven yrs and just got a pair of these a couple months ago, before I had always used the oster t finishers which suck ass compared to these (why didn't I discover the t outliners yrs ago is beyond me) but anyway this sounds like a dumb question but what is the purpose for cutting off the plastic top? And what would cause this trimmer to pull fine hair?
Do you have an idea where I can buy the older model of the Andis T Outliner like you have in this video,I have been trying to get it but they keep shipping the newer model to me. By chance do you have the model number,I will appreciate it if you can help me with the model number of this older model so that will help me in looking out for it.
They don't make them like that anymore what they shipping you is what they make now only way your getting a older model is if you buy a used one. Why do you want the old one anyways?
I broke my regular blade yesterday and here they only have gtx blades in el salvador is harder to order things onlin shipping is too expesive so will the T ouliner work good with the Gtx blade? I really apreciate you help man
Buddy the smoker up the block that is an “expert” at everything for $10.00. FoH those blades weren’t centered at all, lopsided weight distribution is why the blades wear uneven. Smh. Barber Academy? More like meth shop
Your technique for setting the tension on the spring arm really needs improvement. It's not just a matter of pushing the spring down but adjusting the nylon ball to properly meet the cutter blade opening.
New barbers......NEVER.....EVER...Slide your clippers on any surface!!!!!! This guy is a nutcase for that. If the board saw this he would lose his license immediately, (if he even has one).
RUclips Barber Academy bro that dude seriously just needed to talk shit about your video, instead of just not typing shit. But thanks for your video it helped me out a lot.!
Sharpened it against a stone. I know it's a difficult concept to grasp, so difficult even our cave ancestors had this idea long ago. The first cavemen actually had a meeting about sharpening objects on stone and one guy said "I'm out." He failed to find a suitable mate because all his shit was dull and the men who used stone gained an advantage. He perished long ago, glad you are here to keep his spirit and memory alive.
That's crazy. There isn't a set of clippers known to man that barbers haven't modified to get better performance out of. Out of the box settings just don't cut it with these.
Daconnect5 If you had time to watch the video, you have time to follow the steps I would think, especially if it will bring some of your trimmers back from the graveyard
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Thanks man. I just gave my old outliner new life. I cut the top off like you showed us and did all adjustments. Now it cuts like new and looks cool. Thank you
Yo my man I've been watching other Barbers zero gap there trimmers but your the only one that's actually shown it step by step bro. THANK YOU!!!👍
I found that if you cut your T- Outliners off when you step back and look at the line up or every time the Trimmer comes off the clients head you can use them all day with out them over heating.
Thanks for this piece is info. I might try to cut mines now. My son complains about the head a lot
Brooooooo.... I was stuck your one comment saying make sure you put the negative screw on first before the small gold piece and positive side second saved me lol. Thanks for the detailed video!
You have really good and informative videos. I do my own line ups and sometimes cut my friend's and nephew's hair, so I am not a serious barber, but it's still good to learn from your content. I do electrical work for a living as my main job, so I have a lot of knowledge with electricity. Just FYI, those 2 wires aren't positive and negative. The black wire is the hot that gets power from the outlet, and the red is the switched hot that feeds power to the motor when the switch is on. The white would be the neutral.
@@RUclipsBarberAcademy As long as you put wires back where they came from it doesn't necessarily matter what they're called. As far as barbering I am not interested in doing it as a career. I just like to cut my friend's hair every now and then. Built-in obsolescence is why we have to keep buying new ones. They don't make things to last like they used to. I wonder what kind of degree they'd want to hire someone as a designer.
@@illestofdemall13 I have a question for you. Yesterday as I was cleaning my Andis T Outliners I somehow broke the red wire from the little metal thing that the screw is in. I don't have soldering equipment so I just stripped the wire back and wrapped it around the screw. It works again but what problems may I come across since that little piece of metal is gone that the screw originally went through? I hope I'm making sense.
img.ruclips.net/user/viWaN2ifH5iF0/hqdefault.jpg It looks like what's on the end of the wires in the photo.
@@ThaRedPitbull If the wire is secure under the screw then it should be ok but the terminal makes for a more reliable connection.
he look like that white boy that fixed my headphones when i was locked up only cost me 1 soup cool as a fan ty cornbread appreciate it
This comment got me dying 😂 wtf lol.
Nah it's fine tho
j blue nigga how long you been out? Sounds like you been in the pen since the 90s talking like that.
@@terrycrews1760 lmaoooo
😭
“Cool as a fan,Thank you cornbread”😂🤣😂🤣
Great video, nice and simple. Straight to the point. I wish every barber video was like this. Great job bro
I know it doesn't matter, but did you notice the switch-up of the red and black wires? Just wanted to say, I really do think your channel is underrated. You may not have the expensive cameras or flashy intros, like other more popular channels, but your explanation of the fade is the best I've seen. I've known to use the corners of the clippers, but you've explained the reason why for those that don't. The little details that are hardly ever mentioned, and overlooked by the veterans, need to be taught to those coming up in the barber life. Just wanted to say thank you and sorry for the long comment.
Nail glue and floor tiles , ingenuity at its finest lol.... actually a great video, you were able to bring those t-outliners back from the dead guud sht
I just bought the new, although it has been out for a minute, cordless EVO trimmers from ANDIS. I haven’t taken them out the box yet. They are already skeltonized from the factory. They are supposed to be the bomb, from what I understand. ANDIS, in my opinion, make the best clippers and trimmers. Peace.
the best video i watched learn the best
now i can make use of my andis
takes a lot..
I have seen other videos where they mention to trim them down, so they won't get too hot, which makes more sense, you don't have to trim them down to make adjustments, they do get warm/hot in about 10 minutes
Yee. Can't wait to get my T-outlinerz and start cutting.
Hey RUclips Barber, Did everything you said cept for the skeleton part (which imma do) but now my tliner is leaving lines??? Is is because i set the blade on wrong? Also REALLY appreciate your Fade tutorials started on my sons a couple of months ago 👌🏽👌🏽👌🏽. Got me feelin like a barber wit all the compliments 🔥🔥🔥
Great video....
Questions.... why is that my t outliners andis overheat/gets hot.
How do you keep your cutter blade in place when you screw your blades back on ?😮
Real good video man appreciate that you had the idea to upload it ...respect !
Thanks for sharing those tips! ♡☆. Now i figured why mine were hitting at they should after i changed the blade.
Nice idea of barber job
Man my t outliners suuuuuuck right now!! Pulling hair so bad!! I'm gonna try this tomorrow as soon as I get to the shop!!! Praying it works because I'm ready to toss them shits in the garbage!! Lol!! Great video bruh!! Barber love from Michigan!!🍀💈🍀💈🍀💈🍀💈🍀💈🍀💈🍀
Jeff the Barber * **WhaT websiTes do yoU uSe to oRdeR youR equipmenT fRoM bRo posT soMe linKs foR me pLeaSe.!??** 🙏🍻
I actually order from a catalog.... Williamsport barber supply. I have an account w them...
I'm in MI too bro, what did u end up doing to them? About to modify mine tonight.
DETROOOIIIIITTT✊🏽
Your videos are excellent my man! Subscribed. I'm looking at a second pair of T liners and doing this modification on my older set with a fresh blade. Is the primary reason to trim them down, so you can control the tension?
I have seen other videos where they mention to trim them down, so they won't get too hot, which makes more sense, you don't have to trim them down to make adjustments, they do get warm/hot in about 10 minutes
Have you had any charging issues?? I think I need to either replace the lithium battery, the charger cord, or the charger base... but it wont hold a charge anymore after 22 months.
#SUGGESTIONS??
Def explained it fair n simple, i will be subscribing to your channel
I wish I could have found this video before I donated my old outliner to the thrift store
Great video to follow
so does zero gapping make your trimmer hit like crazy and leaves thos white marks on the hairline?
What if that tension arm will not snap down mines has no tension
Go to Larry the Barber man he has a video on that.
Love the Bills hat Go Bills.
We are all Patriots
Wow tile sharpening to get by i would have never thought of that!!!
This was very helpful thanks for the video
Jesus is coming back very soon🥰🥰
Did the same thing to a pair of old t outliners i just bought. Cleaned them changed the blades , cleaned the switch & skeleted them . I may have gone wrong somewhere bcuz when i try to screw the case down and the pressure applies the case overlaps the designated bracket trenches and when i turn it on the case buzzes like mad. Can u recommend any fix for this ?
To make the blade more even you could rub it on a grind stone it will also sharpen the blade as well.
SARSX452 what about a file ?
Bro Fire!!!! Thank you
Good playlist
Been a cosmetologist for seven yrs and just got a pair of these a couple months ago, before I had always used the oster t finishers which suck ass compared to these (why didn't I discover the t outliners yrs ago is beyond me) but anyway this sounds like a dumb question but what is the purpose for cutting off the plastic top? And what would cause this trimmer to pull fine hair?
I want to know if I can modify the Andis t outliner with babyliss pro fx 707z blade
Do you have an idea where I can buy the older model of the Andis T Outliner like you have in this video,I have been trying to get it but they keep shipping the newer model to me. By chance do you have the model number,I will appreciate it if you can help me with the model number of this older model so that will help me in looking out for it.
They don't make them like that anymore what they shipping you is what they make now only way your getting a older model is if you buy a used one. Why do you want the old one anyways?
Thank you!
Thanks you helped
Over the years the quality of Andis Clippers had went down drastically but the prices have went up🤬👎👎
That's a lot of things though...
Will the andis gtx blade fit the t outliner
I broke my regular blade yesterday and here they only have gtx blades in el salvador is harder to order things onlin shipping is too expesive so will the T ouliner work good with the Gtx blade? I really apreciate you help man
Can you do my clippers?
Good job man
Let’s Gooooo 💯 k!
Dude get a flat whetstone and some honing oil to sharpen the blades
And this is a barber academy, going back to jeezy 360
Buddy the smoker up the block that is an “expert” at everything for $10.00. FoH those blades weren’t centered at all, lopsided weight distribution is why the blades wear uneven. Smh. Barber Academy? More like meth shop
Awwh hell naa mayneeeee ajaja thats some rrona typashet
Large hacksaw is not the best to cut them with, use a Dremel, that's the best way to cut it.
Good VIDEO
2:46 my girl loves when I do that
I have some items to send you. Where can I send them?
Appreciate the education bruh.
What was the Achievement?
Hey bro. Do you know if the gtx blade will work on the og t-outliners?
Logan Johnson of course they do
Thanks man. I thought I had regular t ouliners but judging by the stock comb pretty sure theyre gtx anyways
Super helpful
My man just completed surgery
Got my T-Liner on point!
Why cut the top off?
Is it safe to use in terms of electricity and wiring?
Alright man, so you got this andis t outliner, and ITS SUCKS! And yerrr mad!! Lmaoooo FAX
Barber Cisco 661 **WhaT wouLd yoU recommend bRo I'm new to this shiT buT thaT's the saMe misTaKe I madE.???** 😒😠
@@TheAGODAMI look into the Wall Detailer man, also T-Outliner is fire once you zero gapped it, takes all of 2mins.. oNe
Waht about oil
A Dremel with a cutoff wheel would probably work better
I wont to this naching, but how to get this it
Who's here after the Tyson vs Jake Paul fight? 😂🤣
I hate that design of switch these clippers should be made with a toggle switch.
Having issues with mine... now I have to modify it.
Go dj 4:46 😂
Interesting!!!!!
Nice presentation, please control the BACKGROUND NOISE as it detracts from what you are trying to present.!!
Need to work on the focus
and oh on the floor are you sure bro?
Bro i owe u lunch
Your technique for setting the tension on the spring arm really needs improvement. It's not just a matter of pushing the spring down but adjusting the nylon ball to properly meet the cutter blade opening.
reminds me win use to sharpen shanks in prison.n staples to make tatto needles.n then .burn em to sanitize needs n alchohol wipes from imfirmery
michael bling sure you been to prison. We believe you 👎
Paul Wall face ass. Good video though
just make sure that you buy a new one
Bills mafia
You think your weather is cold? Look at your super bowl record
did mine with a dremel much faster
@MrEddieBarber have you heard of the Andis Pivot Pro? I have those and would like em to hit, but they're not set up like the T outliners.
I did mine with a Dremel too.
He keep saying half moon, you actually want it to be a creasant moon
newsflash: the hacksaw is not the best tool for this job. invest in a dremel / rotary tool. thank me later.
#crescentmoon
Cool vid but Half the video was shot outside the frame.
Good Men! holdon well
New barbers......NEVER.....EVER...Slide your clippers on any surface!!!!!! This guy is a nutcase for that. If the board saw this he would lose his license immediately, (if he even has one).
You won’t get fined for sharpening your blades
RUclips Barber Academy bro that dude seriously just needed to talk shit about your video, instead of just not typing shit. But thanks for your video it helped me out a lot.!
Did he just slide a clipper on the ground ?!!!!!! Ok im out
Sharpened it against a stone. I know it's a difficult concept to grasp, so difficult even our cave ancestors had this idea long ago. The first cavemen actually had a meeting about sharpening objects on stone and one guy said "I'm out." He failed to find a suitable mate because all his shit was dull and the men who used stone gained an advantage. He perished long ago, glad you are here to keep his spirit and memory alive.
@@RUclipsBarberAcademy I'm new here. What a nasty attitude. Geez.
@@TuxieTude facts. Like wth is up with dude. buddy can't take a joke 😒
I'm glad you're not a mechanic.
Gobills!!!!!!
Wow. Really. On the floor? I wouldn’t want that blade on my head. No bueno.
Thats why they have disinfectant spray js
Tai Quality y’all must have never dropped your guards on the ground.... sterilize it and keep it moving
Tai Quality I was thinking the same thing😊
Ac
Bro have you been in jail?
You know to much
Lmao
Dremmel tool
If u have to do this then u prob shouldn't buy it 🤣🤣🤣
That's crazy. There isn't a set of clippers known to man that barbers haven't modified to get better performance out of. Out of the box settings just don't cut it with these.
Dam I thought only black dudes use the T-Outliners.
Every race uses those andis and wahl are the biggest trimmer manufacturers in the world along with ConAir(Babyliss)
Only black dudes use the t outliners? WTF🤔🤔🤔
lol u be listening to 2012 ass songs
stalker alert
Yeah just sharpen your clipper on a dirty ass floor and go and cut someone's hair.🤦🤷
Ain't nobody got time for all that
Daconnect5
If you had time to watch the video, you have time to follow the steps I would think, especially if it will bring some of your trimmers back from the graveyard
Ace OfFades if you don't get your corny ass outta here 😂😂😂😂
Sloppy and unnecessary to do most of what you did. Watch a video or 20 before you make another video duke.
On the floor? If you do something why not doing it properly? You are a butcher.
Look at young Eddie i didn't realize i been following this long 1🫡
@@desmondmitchell5602 haha old one bro
@@RUclipsBarberAcademy yeah man