Thanks bro this was perfect on how to do it. I was all stressed out in doing it perfect and you made it way simpler than putting it on a mirror or anything
This truly was a super cool video, totally. Even though it was posted some time ago, I've actually been so blessed by the Lord in getting into giving myself haircuts, many many years later as a young dude. I really like getting jiggy with a nice, crispy line- up after the fade. I've got some t- outliners, nothing to fancy like the Andis, but could be better. Thanks for the video.
easy enough good demo. Good to hear a brit as i live in north america and mostly get usa vids mate . Like the drilling of holes on housing. Think i will do that as i cant cut the housing from top off, as its a healthy and safety in my province and could get a fine .
Your show is great! I'm a beginner starting on my own head but aiming to expand. How do I get Jeannie in America to modify my Andis clipper like yours? I'm in America.
0.02 gap. You probably can start cutting after oil up. But after about 20 heads Zero gap them. Helps to clean and then a couple drops of clipper oil on them before you assemble back Run for about 30 seconds. Clean off, hit wit clippercided and off you go. I always test my mustache. 15 years and still beaming
What is the point of zero gapping, is it so you can shave your face closely? If zero gapping is better why didn't they set it like that at the factory?
Good day Larry The Barber Man I see the clippers case are half modified why didn't you/she modify the Clipper case all of the way that way you can get to the tension screw without removing the top cover and speaking of the tension screw why did you not check the tension screw to make sure that it's in the proper place. IE the click and half moon setting.
I am not a barber. I have a corded Andis T Outliner and using the Andis Blade Setter to get what I think is a good zero gap on a new set of blades so I can trim my goatee and mustache very nicely. I’m hoping to be able to use the T Outliner to get a close, clean shave of the stubby facial hair to about an inch away from the mustache and goatee. Right now that area is not smooth at all.
Do you also zero gap andis outliner 2 that is not a t-outliner? Please reply, its urgent, i got to buy one of thrse 2 now. Thanks so much. Also which is better for self cutting hair on head?
Please do not use a drill and a drill Vise to put the holes in the cover because you're most likely to drill into the motor without a proper depth setting just modify the top and that surely will be enough to vent the clipper
Thanks bro this was perfect on how to do it. I was all stressed out in doing it perfect and you made it way simpler than putting it on a mirror or anything
This truly was a super cool video, totally. Even though it was posted some time ago, I've actually been so blessed by the Lord in getting into giving myself haircuts, many many years later as a young dude. I really like getting jiggy with a nice, crispy line- up after the fade. I've got some t- outliners, nothing to fancy like the Andis, but could be better. Thanks for the video.
What happened to the picture you were going to take to show the blade?
Thank u sir! Just got this outliner and used this video to 0 gap it before it’s first use!
Excellent video once email again. I ha e a quick question. Is this the same procedure for the cordless Andis T Liner GTX blade?
I gave A TumpDown because he did not Zoom in to show the Distance between the two Blades for tbe Zero Gap when the Blades were off of the Liners!
easy enough good demo. Good to hear a brit as i live in north america and mostly get usa vids mate . Like the drilling of holes on housing. Think i will do that as i cant cut the housing from top off, as its a healthy and safety in my province and could get a fine .
Your show is great! I'm a beginner starting on my own head but aiming to expand. How do I get Jeannie in America to modify my Andis clipper like yours? I'm in America.
Thank you !
Jose Walle your welcome 🙏
Awesome. Thank you.
Thank you for posting another great video, Larry. Do you recommend buying the Andis zero-gapping tool?
nukmike no not really just use your eye, then tighten slightly to hold your setting - then alternate between left and right screw to fully tighten
Do Andis T liners already come 0 gapped out the box cause mine already look like they are and I don’t wanna mess with them for no reason.
michael rodriguez well trimmers are pretty close to zero if not zero
0.02 gap. You probably can start cutting after oil up.
But after about 20 heads Zero gap them. Helps to clean and then a couple drops of clipper oil on them before you assemble back
Run for about 30 seconds.
Clean off, hit wit clippercided and off you go. I always test my mustache.
15 years and still beaming
Then don’t, tf🤦🏽♀️
@@likeyawilliams4724 😭💀
U need to make a video of close up so we can actually SEE what you’re doing step by step PLEASE!
Really?
What is the point of zero gapping, is it so you can shave your face closely? If zero gapping is better why didn't they set it like that at the factory?
Because they can cut a little to close for comfort in the wrong hands
Such a long awkward explanation for a simple thing..
Love the videos brother! Keep them coming!
Btw, what is your opinion on the blade setters they sell on the market?
My Andis T outliner already came zero gapped is that possible?
yes it is if it was a return but new
Brilliant, cheers mate.
You welcome 🙏
Good day Larry The Barber Man I see the clippers case are half modified why didn't you/she modify the Clipper case all of the way that way you can get to the tension screw without removing the top cover and speaking of the tension screw why did you not check the tension screw to make sure that it's in the proper place. IE the click and half moon setting.
not sure to be honest with you
I am not a barber. I have a corded Andis T Outliner and using the Andis Blade Setter to get what I think is a good zero gap on a new set of blades so I can trim my goatee and mustache very nicely. I’m hoping to be able to use the T Outliner to get a close, clean shave of the stubby facial hair to about an inch away from the mustache and goatee. Right now that area is not smooth at all.
What are the reasons why a baber would like to zero gap his t outliners?
3:44
my cutting blade wiggles up and down when the machine is fully assembled
You got those Andres T-Outliners cuh😭😂😭😂😂
Do you also zero gap andis outliner 2 that is not a t-outliner? Please reply, its urgent, i got to buy one of thrse 2 now. Thanks so much. Also which is better for self cutting hair on head?
It’s the same method worth the cordless t outliner right?
I did this to my cordless using the same steps, works like a champ.
+Larrythebarberman How can I get my clippers modified from the girl who did your trimmers like that. I need a contact information
I agree. How would someone get in contact.. That's fly.
The Clipper is not modified correctly that whole top half should have been cut off to access the tension screw
Very nice sir
thank you larry, great video!
Nice modification, I’d like that on my clippers. How can I contact your friend Genie?
what is that blower name?
V8 monster DataVac electric duster
Perfect
Hi why my andis T outliner is pinching hair. And getting too hot. I'm new to this.
Jhony English loosen the tension screw a bit
They all get hot quick 😞
I use my drill vice. Much like the one that you use in you modify video.
Please do not use a drill and a drill Vise to put the holes in the cover because you're most likely to drill into the motor without a proper depth setting just modify the top and that surely will be enough to vent the clipper
You're the best!
Outliner 2?
Isit very noise
His clipper is noisy asf