Andis T-Outliners How To Fix Adjust Them For The Best Performance

Andis T-Outliners How To Fix And Adjust Them For Best The performance, in this video, Larry the Barber Man demonstrates how to adjust the tension spring in your Andis T-Outliners to ensure that they’re cutting at their very best if your Andis T outliners are not cutting. The step by step instructions in this Andis t outliner adjustment video will help any barber get the job done without any fuss!
For more from Larry, the Barber Man don’t forget to subscribe to the channel and head over to www.Instagra.com/larrythebarbe... and / larrythebarberman for more - Larry provides regular, free information about taking care of your clippers and powering US clippers abroad. You can also email him directly at [e-mail]
Blog post: larrythebarberman.com/blog/an...
/ larrythebarberman
/ larrythebarberman
www.larrythebarberman.com
=================================================
Email [e-mail]
=================================================
Barber Videos: www.barbers.tv
=================================================
www.larrythebarberman.com ( My Online Store )
=================================================
Barber Blogs: www.frequency60hz.com/blog
=================================================
Hair Clipper Converters: www.frequency60hz.com
[e-mail]
=================================================

[@pokerface5070]

I have only one critique.The camera should've been zoomed in a lot closer. He keeps saying "NOW YOU CAN SEE" but I can't really see 😐

[@RaveXmusic]

True that bruh.

[@dep7up]

​@@RaveXmusic bruh that true

[@judesepulveda682]

That pissed me off so much

[@sean5520]

Aaaaand my problem is solved .... great video, thank you Larry.... this video brought a pair of my t-outliners back from the dead...

[@cvcjdm2]

Dude I'm high as fuck watching this, lol

[@jflores9891]

thanks for taking the time to make this video! ! you helped me have my t outliner set perfectly

[@scottanthony8823]

Just did this adjustment last night...works like a charm, takes a bit of playing with to get it right but amazing results! Thanks Larry

[@erikenders9323]

Worked like a charm! Thank you!

[@roderickwilliams1490]

Thank you so much!!! This video was VERY helpful

[@ruminating1596]

You are amazing. Brought my clippers back! I kept zero gapping and had zero results, but I adjusted the tension spring and they are slicing like they used to!

[@obamoro74]

subscribed a few weeks ago , love this channel !

[@bkness_7183]

Thanks Larry The Barber Man. Now my tension is perfectly set

[@ufic1442]

Excellent video ! You have saved me money !

[@lu0007]

Good job Larry!

[@inc55]

Awesome video mate. Appreciate it.

[@rhondalove1047]

Thank you, Larry!

[@user-zp4bi8vh9j]

this was the best tutorial ever

[@d.j.mcdonald2636]

Mandem u saved me from throwing out my liner fam… love

[@Aceadonis2011]

Thanks for the info!

[@monk33ypitola87]

Awsome guide

[@TheBoxingCode]

Awesome gona have to try this out

[@abrahamortiz5702]

Love your accent from London

[@erickvaldez1219]

nice work brother

[@studswaggah]

I'm going to try this

[@erickvaldez1219]

nice work

[@BatBrakesBones]

Thank you, Larry. I've had such bad luck with these trimmers. I've had them used on me in barbershops, and watched them in videos cutting flawlessly. But mine never cut. I've sharpened the blades, set the blades, and never got them to work properly. I think this may be the problem. I won't give up on them.

[@mechlamell3849]

Good stuff

[@darrenferguson5994]

legend, must do this as I dropped mine

[@PlayMeFretless95]

Can you please do a video on the Styliner II's?

[@chaakamahchaadmusicchannel3050]

#BOOM Thanks bro!

[@michaelcafaro4022]

Thanks for the great video. I was very close to trashing mine and buying a new one.

[@datrillone]

Salute

[@braaji]

Great video, can u tell what is the power converter are you using

[@mbarber4592]

Big machine 👌🏻

[@ricoewell6371]

should you do this to the gtx trimmer?

[@obamoro74]

i just got a wahl 5 star liner , how can i get it to its best performance ?
i been working with andis t outliner trimmer and no problem , but my new wahl 5 star is not as great , but so many friends have recomended it..
can you do a video on how to turn my new trimmer up ?
thanks larry.

[@joecool97]

Where can you find those kind of Screw Drivers? What should you do If the Tension Spring won't even and breaks trying to squeeze the curve part slighty?

[@PGenz]

i have new clippers and once the oil was added, the vibration was insane. how can i tune the vibration part down?

[@WD-rc8bt]

do you use the stock blade or does anyone have a good alternative?

[@CarolCityCane305]

i want to buy this machine..when i buy it do i have to adjust it right away to get the cleanest lineup on my forehead

[@MrYusha]

Hey bruv. I'm born in UK live in L.A. Went to London plugged in my andis without the converter and be em up. lol! What u think about the new Andis GTX T outliner?

[@BL-pv7et]

Hello where can I buy the power adjuster thanks

[@jazzk8176]

Where did you get the converter from ?

[@vegasLo702]

If you loosen the screws that hold the stationary blade ,and shift The stationary blade down words it will do the same thing...... also when you stretch out the adjustment arm spring ,It tends to put pressure in a downward force on the stationary blade causing Unproper tension. The best way to explain this is having Center tension on the stationary blade. If the cutting blade has tension going upwards or down the words that's where it will fail in the long run

[@DamionSuarez96]

hi larry the barber man i wanted to request a video for a repair service for an andis fade masters when its clattering and replacement for broken teeth on the blade replacement. thank you

[@larrythebarberman]

Damion Suarez you need to push down bottom blade correctly on to the mount

[@obamoro74]

great video .

[@spthecreator.1936]

I have one that is vibrating very loud and shaking hard. What do i do because they are suppose to run almost silent

[@JACKSONVILLE1200]

Bought your 60hz converter and my andis gtx and master is making a loud noise like it's not connected to a 60hz converter

[@Toddry]

Excellent. What size screwdriver are you using?

[@theoravelo136]

I use #1 Philips screwdriver

[@conormcdade6021]

Larry I got the transformer from you and its stopped working the car lighter bit still works but the battery seems dead can I get a replacement or fixed?

[@larrythebarberman]

Hi Connor, email me [e-mail] and we will get it sorted

[@mannyfrencha5102]

Do yo modify your liners?

[@RonDaBarber79]

what causes the trimmer to pull or snag hair?

[@CarlosGonzalez-jv2rn]

top screw to tight

[@williamswink5144]

Carlos Gonzalez and i still havent seen a video addressing that problem! i do like a lot of other barbers ive seen and take the screw out and wrap them with electrical tape..

[@Staceyhhs]

how do you zero gap and is masters ?

[@gika_guru]

which power converter would u suggest to us?

[@williamswink5144]

Gio Rusia you dont need a converter in the US. US power IS 60 Hz

[@mrshawn90]

Would be nice if u end it off buy cutting some one hair or u r hair to see if it really work I'm not doing that to my clippers I been cutting good with them same clippers for years now when I first got it out the box

[@fabritzeo]

I've adjusted my tension spring and seem to have set my blades right but my clippers still don't seem to cut? Could they just be faulty?

[@BL-pv7et]

Hello did you oil the blades

[@BL-pv7et]

Maybe you have the tension screw to tight that would stop the blade from moving

[@TraumaER]

Between this and the blades never being zeroed when you buy them new, I wonder if Andis has any quality check system. Seems like they ship new clippers all out of whack. 🤔

[@bL3dbL4k]

True. I bought 5 from Amazon. Only 2 cut good. Same adjustments to each. It's a hit or miss with each Outliner. And you rarely get one perfect out of the box.

[@nathanjohnson8990]

This is why I'm switching to Wahl detailers

[@Staboogie777]

Just got mine brand new and they cut like garbage smdh

[@ruminating1596]

I think they do it because your common consumer is an idiot and would slice their head open and try and sue the company. SO the only true way to zero gap your blades is by voiding the warranty. Therefore, they can prove you altered them and they are guilt free.

[@TraumaER]

@@ruminating1596 wouldn't be surprised. And you got idiots using these clippers for other parts of the body and wind up finding a way to cut off something else. But yeah, I still have these going on 10+ years. Got a new blade just once. Use them a lot now since I cut my own hair again for last year and line up my own hair with them.

[@adancaro754]

My t outliners turn on and you can hear the motor but the blade is not moving, any idea of what it can be? I already open it and cleaned everything, but still the same thing

[@kk1780]

Same

[@kk1780]

@DatKidKod a they were totally mashed up so i got new 1 and zero gapped it

[@elvelos7936]

Sooo where the PDF link at????

[@dragonprototype3883]

It's the same rattling sound as hos before and after. At that point, he knew he fudged up. Lol

[@thelpsman953]

"a-shoe-men"

[@thevibestation5174]

The LPS Man I read it right when he said it 😂

[@thelpsman953]

Zugy 😂 I couldn't even pay attention

[@IMCHRIS13]

lmfaooo

[@gavinactivateja3869]

I jus put a sponge in mine to reduce the sound

[@kingmecutsaaron4252]

Gav M does that increase the heat?

[@gavinactivateja3869]

Naa

[@dtchevy7317]

Where u put the sponge at?

[@travionwashington4753]

does anyone know the name of the tool he's using to adjust the tension spring?

[@Wiggaway318]

needle-nose pliers

[@travionwashington4753]

Wigga thank u very much!

[@peterangel9186]

travion washington needle nose pliers

[@rickyhernandez4844]

Larry the barbaman (Jamaican voice)

[@williamtjeuw4442]

sounds exactly the same!

[@ricoewell6371]

Sometimes when I'm cutting with the T Outliners it tends to not cut. It makes a loud noise and sound like something is getting stuck in the blades. What's the cost of that?

[@sebvaja8571]

i know what u mean like you bald out and it makes a weird noise ? both my andis have done that dont know how to fix tried this video but made it worse

[@darthclone7]

+Seb Vaja but is it still cutting good though?

[@sebvaja8571]

+darthclone7 they cut but feel like the pwer has been zapped

[@allensmith3082]

Good video but need better angles

[@Bestoftherest222]

Rather annoying I had to line up the blades and adjust the tension to make this a quality pair of trimmers. Why can't andis just make them this way from the start?

[@ssaini5028]

+Bestoftherest222 I went with the Wahl Detailers, out of the box they cut much closer than the Outliner

[@williamswink5144]

Bestoftherest222 they dont send them out adjusted because if youre inexperienced, you can slice someone open with zero gapped trimmers. they work well enough for home use out of the box

[@av8tordan514]

How about you unplug the machine before you shock yourself!

[@tomerasado8558]

Just bought this.the motor getting crazy hot ,3-4 minutes after i start cutting.is it normal?

[@larrythebarberman]

if it is not oiled

[@lavlogg6031]

Is it just me or did I just see him touch all the inside of the machine while it's plugged in? 😒😒

[@jflores9891]

thanks for taking the time to make this video! ! you helped me have my t outliner set perfectly

[@erickvaldez1219]

nice work