5 year old video. Still saving haircuts! Thanks, brother.. I've just been slapping the 💩 out of her until she starts back up... She tried to put a restraining order on me but we watched your video and I snuck up on her (when she was unplugged) and stuck my screwdriver in her and performed a good old "lefty loosey", just like you said. Now we are living happily ever after. From her and me... THANK YOU.
Man.... huge thanks. Mine hasn’t been working for two years and I refused to buy another. The others i bought have been subpar in comparison. Gave this suggestion a shot and they are working like new again!!! Much appreciated!
Hey brotha thank you, I’m a legally blind veteran and I fix my clippers thx to your video 👍🏾 just FYI I see you have 11 thumb downs. The Hate is reaL but keep doing what you do cause you just help me by letting me know I’m my only limitation not my vision loss!
Had to come back and say thank you, this video worked like a charm for my Outliners 2 and My T-Liner, much appreciated, saved me money from having to go get a new pair, hope everything goes well for you in your life fam 😇
Skip to 3:10 you’ll thank me later. But also thank you for posting this. Took mine to an electronics repair and he told me it would cost more than it was worth to fix and also that I should invest in better clippers...🤦🏼♂️idiot
Too tight - loosened and works like a champ. Thanks for this brother - wish I found it before I bought this new pair a few months back. Old pair from 2016 was still good just didn't know this was the issue
Thank you 🙏 it works now ,I had left mines in the truck and I believe from the heat the screw inside got super tight .loosened it up a bit and it works better than before
Also , make sure your top screw isn’t too tight ! I tightened the top screw on the cover too tight and it didn’t move , but when I loosened it a little then it worked so both methods are good
Hey I have the t outliners modified into the skeleton and I put a ceramic blade on it. After I did that, I notice the blade would move out of place and I don’t know how to fix it.
This video is exactly what I needed, I’ve been trying to figure out this issue for years. You solved 3 years worth of headache in a 6 minute video!
Glad to help and glad it works
5 year old video. Still saving haircuts! Thanks, brother.. I've just been slapping the 💩 out of her until she starts back up... She tried to put a restraining order on me but we watched your video and I snuck up on her (when she was unplugged) and stuck my screwdriver in her and performed a good old "lefty loosey", just like you said. Now we are living happily ever after. From her and me... THANK YOU.
😂😂 glad it worked cuz
I been looking rough for about a month. I was 5 minutes away from buying a new pair. Saved me 60 bucks!! Much appreciated
60 bucks? You get yours off eBay... It's two years now so maybe it's inflation.. Mine where 100+
@@Jeralddoerrcrazy, you could’ve got a nice cordless trimmer for 100
@user-bq2xu3mc1r Yep... I own corded and the same version but wireless. Love them.
5 years later and this video is still saving andis clippers. Thank you bro!
Just got the Andis Stylist Combo & the T-Outliner blade wasn't moving out the box thanks for the vid just what I needed!
Man.... huge thanks. Mine hasn’t been working for two years and I refused to buy another. The others i bought have been subpar in comparison. Gave this suggestion a shot and they are working like new again!!! Much appreciated!
Thanks to this video it saved me a headache because I was about to throw this buzzer out the window lol
Had mines for over 10years and I was just about to buy a new one! Thanks bro
Hey brotha thank you, I’m a legally blind veteran and I fix my clippers thx to your video 👍🏾 just FYI I see you have 11 thumb downs. The Hate is reaL but keep doing what you do cause you just help me by letting me know I’m my only limitation not my vision loss!
Thanks a lot brother. I appreciate the love. God bless.
Thank you!!! You are the realist for giving all of us these helpful tools.
Thanks man!! I thought my outliner was done but i followed your steps and it works!!
Dude thank you!!!! I had this issue for almost year after replacing my blade. Thanks for sharing, my andis T liner works great now !
Thank you so much. Was just about to buy another one until I stumbled on this video. It really works.
Works like a charm thank you sir. You saved me $75
My man, you just saved my some money. Fixed mine on first try. Funny enough it was the screws by the switch that had to be loosened. Thanks!!
Thanks for the video. Saved me from buying a new one.
Had to come back and say thank you, this video worked like a charm for my Outliners 2 and My T-Liner, much appreciated, saved me money from having to go get a new pair, hope everything goes well for you in your life fam 😇
No worries. Glad it worked!
Skip to 3:10 you’ll thank me later.
But also thank you for posting this. Took mine to an electronics repair and he told me it would cost more than it was worth to fix and also that I should invest in better clippers...🤦🏼♂️idiot
Thanks for the timestamped link!!!!!!!!!!!!!!!!!!!
Lol... These are the best Clippers ever...
Thank you, just fixed mines and they are working even better
This video came just in time. Good Looks
This works. Such a quick and easy fix. I only had my timers for about a year.
Thank you bro! I was going to send mine off to get repaired but this worked perfectly.
Man your the best! I was this close to buying a new razor ‼️💯👌🏾
Thnks I was able to fix my husbands clippers!!!!! Saved mad money
Too tight - loosened and works like a champ. Thanks for this brother - wish I found it before I bought this new pair a few months back. Old pair from 2016 was still good just didn't know this was the issue
Thank you bro!!! This just saved me another 40 from a haircut #godblessyou
thank you was about to buy a new one. i try this and it works better than before
Hell yeah thanks man this is what was wrong with mine , cuts so good and sharp now thanks .
Thankyou this video saved me from going to buy a new pair of clippers
THAAAAAAANKKKKKKK YOUUUUUUU!!!!! So grateful that you took the time to make this and share it. 💛✊🏽✊🏽✊🏽
Needed this vid, man! Came thru for me in the clutch. Much appreciated!
A lifesaver man thank you.
Thank you 🙏 it works now ,I had left mines in the truck and I believe from the heat the screw inside got super tight .loosened it up a bit and it works better than before
This video showed me perfectly how to fix my Andis!
Also , make sure your top screw isn’t too tight ! I tightened the top screw on the cover too tight and it didn’t move , but when I loosened it a little then it worked so both methods are good
Yes, this is accurate. I had to do that as well. Good tip to point out.
I think that's when you want to adjust the silver tip outside with the flat head screws.
🖤
You saved me $70. Thanks for sharing this
Exactly what was going on with mines, the switch was bad, I bypassed the switch and I'm good, better that buying a new pair ....👌🏾👍🏾
This helped out a lot. Thank you
Exactly what I was looking for . Thanks for your video and much obliged.
Tanks so much bro like it’s working better than before.
Fixed. You the man, thanks my dude.
Saved me $60-70. Thank you❗️
Great video. Just to add, I would try to line up the white ball just below the middle point. If it's too low that means its too tight.
great help, thanks for the direction, I just finished up working on mine and my dads!
No problem. Like and subscribe:)
Awesome video. Thanks for the help!
Amazing tutorial, worked like a charm!
Glad it worked. Like and subscribe!
Helped me fix mine, thanks bro!
Great vid thanx for that ...cant count how many new pairs ive bought
I was about to trash this clipper because it would not cut...now it's cutting again better than before 3 years old!!!
Dis a Game changer!! My Second pair was ready toss them like the first one back cutting like new
This video solved my issue thanks alot.
Thanks going to try this in the morning. Mine went days ago.
Thanks bro! Working even better.
This worked 100% you saved my weekend thanks a million. Thumbs up
No worries. Like and subscribe.
Works like wonder thank you man!
Quick and simple, thank you
works perfectly you just saved me some money
No worries. Like and subscribe fam.
Thank you explained everything 10/10
Thanks bro… worked perfectly for me…
Thank u , saved me some dollars🙏
Hey I have the t outliners modified into the skeleton and I put a ceramic blade on it. After I did that, I notice the blade would move out of place and I don’t know how to fix it.
Thank you very helpful, just fixed mine. You saved me a $1000 Jamaican dollars.
Bless up fam
Sala mercy
Man than you so much. I was about to run out and buy a new one. It sounded like the motor was going out.
No worries. Like and subscribe. Glad it worked.
Good looking bro thanks a million!
I love hearing cp24 in the background 😂
😂😂😂
Thank you so much! It worked right away! Appreciate it!💪🏾💯
No worries. Glad it worked.
Nice job! Works like a charm
Def worked for me! Thanks
great vid!! works wonders.
Thanks a mill!
Very helpful!! Thanks very much!
Thank you for this video, it worked for me!!
This video just saved my clippers
This worked thank you for the video!!
Thank you and God bless!
Thanks for the video!
This worked
Thank you!
Thank you!
It works !! Thank you
Huge thanks man 👍🏽
Thanks man great video very helpful
Thank you bro I was about to buy a new one
Very helpful my brotha
Saved me in 2022 💯
Than you , it's back working now
It worked! Thanks.
Great video! I was ready to toss mine
Glad it worked!
Perfect thanks!
Appreciate that. Works like a charm now.
Than you! I almost threw mine out
Saved my ass appreciate it man 🤙🏾
No doubt fam
Thank you!!
Thanks the fix worked!
No problem. Like and subscribe:)
Man thanks so much 💯
Godsend. Thank you 🙏🏾
Thank you so much
Good looking out
Thanks much!!!
Thank you!!!!
Thanks 💯