Remove High Pressure Power Steering Hose and Nut In Hard To Reach Area
HTML-код
- Опубликовано: 24 авг 2021
- See how I removed the High Pressure Power Steering Hose in a hard to reach area on a Chrysler Crossfire without taking off the engine motor mount. Click on SHOW MORE for all tools used and for each specific setup utilized. Please 👍👍👍 & 🔔 Subscribe if this video helps.
👉👉👉
Normally removing a power steering hose is easy, but in some cars it could be hard just to access. This video shows you how to access it, and hopefully help you to replace the hose with ease even if the hose and its nut are in difficult areas to get to and remove.
If you need to see first where and how to pinpoint your power steering leak, then you can check out this quick video here: 👉👉👉 • How To Find A Power St...
Their are about 30 tools and parts you will need to gather:
Floor Jack amzn.to/3oLllOd
Jack Stands amzn.to/3l1Npuk
Oil drain pan amzn.to/35WWaQk
Syringe Pump amzn.to/3cLCsM3
Oil funnel amzn.to/3jPgJD9
Recyclable container or empty jug
ATF amzn.to/324RzKS
Mineral Spirits Turpentine amzn.to/2UNxPuJ
Shop Towels amzn.to/3kNSKpi
Gloves amzn.to/2HWG9BJ
Kneepads amzn.to/3kMe0eW
Flashlight
Breaker Bar 3/8" amzn.to/3oQGTJx
Ratchet Wrench 3/8" amzn.to/2JiEG9d
18 MM wrench amzn.to/3yijm7R
Crowfoot Wrench set standard amzn.to/3jcrDWp
Adapter set amzn.to/3bk8qOi
Universal Joint swivel Adapter set amzn.to/33CHhSi
1/4" Extension set amzn.to/3kMaLEl
3/8" Extension set amzn.to/37GTLeJ
Flat Tip Screwdriver amzn.to/3wbHuZd
Torque Wrench 3/8" amzn.to/3jLg4CN
Power steering oil to choose from (Make sure the oil is compatible with your vehicle before purchasing):
Pentosin 1405116 CHF 11S Hydraulic fluid amzn.to/3A5mYLM
Lucas Oil Power Steering amzn.to/3fqq5pE
Prestone PS Fluid amzn.to/3jecS4c
These tools help determine where your leak is:
UV Flashlight amzn.to/3C9fSHB
UV Dye amzn.to/3ifbDm6
Actual part that needs to be replaced:
Power Steering High Pressure Hose
This is the one I used on this Mercedes or Crossfire Car:
➡️➡️➡️ amzn.to/3dWpEFw
These are the 3 setups you need to make depending on where you are in removing the power steering hose:
Setup 1: will help in loosening the nut
You need this in this order from top to bottom a:
18 mm or 11/16" Crow Foot wrench
1/4" to 3/8" adapter
1/4" swivel joint
1/4" Extension that is 6" long
1/4" to 3/8" adapter
3/8" extension that is 10" long
Setup 2: allows you to easily turn and remove the PS nut fully from the engine area
18mm or 11/16" Crow Foot wrench
3/8" extension that is 3" long
Setup 3: is used to fully tighten the nut when reinstalling the new power steering high pressure hose
18 mm or 11/16" Crow Foot wrench
3/8" to 1/2" adapter
1/2" breaker bar that is at least 12" long
If you would like to help support and grow this channel you can get me a cup of coffee ☕ here: ➡️ www.buymeacoffee.com/randomca...
OR
➡️ ko-fi.com/fixcaryourself
AND/OR make videos you think can help others.
Remember to always think how to be crafty as their may be other ways to accomplish a task like this power steering nut trick without taking off anything else off underneath the car.
Thanks for watching and learning. Let me know your thoughts in the COMMENTS below.
👍 & 🔔 #fixcaryourself 
Авто/Мото
I absolutely appreciate how this man explains every step so thoroughly!!! Dude makes the best car fixing videos!!! 😊
Thanks so much. I like focusing on the details.
This was so incredibly helpful! thank you for putting in the effort to make this video and share this valuable knowledge
Glad it helped, it took a lot of time and lots of creative thinking. Hope you don't struggle on this project!
This sounded like a movie lol
Cool Story!
This was great. Thank you.
Glad this helped! This video hopefully also teaches you how to be crafty to get the job done with less removing of parts.
Hey Man!... thank you very much for posting this video. It is exactly what I need to do on my 2003 Mercedes SLK 32. Though I will change both pressure lines. I spent all day yesterday trying to figure out the best way to reach the far end of the lines without taking the whole car apart. WIS Mercedes manual doesn't mention this work.
From your instructions I see I'm missing some tools so I'll have to get them asap. To loosen the end nut, can I use just WD40?
Thanks for your help. I'll let you know how it goes. My hands are small 😄
Best!
How did it go?
@@FixCarYourselfI'm still working on this. I was able to change the return hose (from steering to cooling line) This is better accessible from under the car and the nut wasn't stuck so it was easy to remove it. With this the leak is gone.
For the pressure line you showed on the video, it seems there is less room in the Mercedes so I was not able to reach the nut the way you did it though I have small hands. Now I need to replace the engine mount that requires removing the steering pump and reservoir (among other stuff) and that will be a good moment to change this pressure hose. I'm waiting for the parts to arrive.
I'll let you know.
Thank you!
I had no crow foot wrenches...on my 12 ram I broke off the pipes near the connection to use a socket...I guess you can do this on some applications if there is room.
I wish I had room to put a socket on.
Could you reach the nut by removing the tire and getting at it from under?
Nope! I tried that as well as all kinds of different out of the box setups and on this car it was not possible unless I removed the engine motor mounts which would have been more time consuming. Also even from underneath their is no leverage or easy way to get a hand in there to turn it, which is why I used a floor jack or bottle jack. Because in addition that was stuck on their tightly. Great question!
@@FixCarYourself Thanks.
Can you whisper lower so it can't be heard your voice at all?
🦻 🗣️
#crossfire #power #steering #hose
Yes!
I'm Batman!
Cool!
Cool!
is that a crossfire
Yep. This is just a regular Crossfire.
@@FixCarYourself beautiful Mercedes i have a 05 limited fun little cars keep up the great info
I agree thanks!
Impossible for my skill level
It was a bit hard, doable... but big hands might be more of an issue.
Why would they charge 900$to fix
Lot to remove if done differently to get to this hose, so as a result labor is not going to be cheap., and I guess it also depends on where you go.
AYOOO ! PAUSE ! 🤦🏾♂️
Ok 👌
Why y’all so scared to get grease on your hands you don’t have to use gloves
I didn't use gloves.
Instructions unclear.
Ok. Please explain.
dude I understand you think your voice is cool but 2 people standing next to me have a point and want you to put the candy down and step away from the children. SERIOUSLY! work on that issue , me I could care less but instructions are to what vehicle ???
Well at least you know this is a video about automotive. Stay off the "candy."
@kelly you must be stupid asf