Buick century power steering lines
HTML-код
- Опубликовано: 22 сен 2023
- Right to the point video cut the fat out of this video for teaching, anyone trying to tackle this project with the high pressure, power, steering line and the return line both from the steering rack all the way back to the pump where the clips are what size wrenches to use what to look for and what to try to do prior to tackling this job. I hope this helps somebody out trying to do this job. I hope you enjoy the content on my channel and if you do make sure you subscribe to the channel, hit the notifications bell, so you don’t miss any videos and also give my Instagram page a follow. We will find out before videos before they post it here to RUclips.
@Gasolinegarage
gasoline_garage...
Edelmann 92054 Power Steering Pressure Hose: Replacement for - 2005-99 Buick Century, 05-00 Chev. Impala, Monte Carlo, 03-99 Pont. Grand Prix, Black a.co/d/2fREbOQ
Sunsong 3401416 Power Steering Return Line Hose Assembly a.co/d/eS6pMaN 
Авто/Мото
That coil wrap of metal tube at the bottom is a cooler. Cheap cooling
Oh man i loved the part where you showed disassembly 😂
Straight to the point! We all appreciate the look @ this job. Thanks for posting and sharing!!
Thank you !
Good video 👍 I think my pump broke so I’m gonna replace that and the tensioner pulley
Omg thank you bro I have to change mine asap ...and you are the only video much love and thank you....🙏
Thank you bro! Your video is very helpful and informative. I've got a 2002 Buick Rendezvous with a leak in the high pressure line underneath the motor where the line comes in contact with the heat shield that separates the line and the exhaust pipe. It doesn't look like it is going to be easy to replace with all the bends and turns but I'm going to give it my best shot.
I have an 04 buick century and the pressure line is leaking through a pinhole in the rubber part of the line.I got the part today and plan on fixing ole Goldie up tomorrow. This video was a great help and I appreciate you taking the time to really explain the process. Thanks again..
Im having a hard time getting the new lines to line up and screw into the new rack lol
Me toooo
@@GimmilFactory i got it eventually lol. I think i ended up reaching in through the driver side wheel well to get them in
Thanks for this video. I looked for vids in the passed and couldn't find any info.! BTW, This is the second Century I've had and both had power steering leaks. Been toping off for a while and keep putting off the inevitable.
💯
I have an 04 Buick century and when I start my car and put in drive in hesitate to drive off then when it do it jerks then pull off any idea why? I haven’t had a tune up either been 5 years 😩🥴
Is that a squeeze clamp on the return line coming out of the reservoir ?
What is the black skinny line near the coolant tank?
Hey the return that’s at the bottom where you say it is wrapped around like a coil…..mine has a small pin hole and it’s drips fluid…..would it be ok to splice it and put a piece of high pressure rubber hose and two clamps on it.Thank you very much for the video.
Yes. Return line is okay, but you woudn't want to do that on the pressure side.
You access the line from the top or bottom to remove?
The return from the bottom and the high pressure line from the top
Thank you for making a video bro but keeping it honest this don’t help. Re do it and show us if they can’t get it after that then oh well. But we have no clue at all how it’s supposed to look as we are doing it.
Looks like it shouldn't be too awful.