Lovely bit o silver that. Your happy laugh said it all. Well done. Ya know watching this I realise I have been forgetting the IR setting on mine will apply it tomorrow. Great test of the update Adam
Just a quick hint why the Field and Park didn't hit the target. Its in the discriminated area, coz its iron and in the Biest mode you run wide open. Its easy to see on the Display :-)
Thanks for the video, do not have this machine but some great finds love the ring and French money. Always love too see a halfpence and a complete beaver 🦫 tail!!😎🐓🐓🐓🐓🇬🇧
Great recording. I'd recommend setting Audio Gain a bit higher for Beast Mode as it generates really low sound volume when detecting a weak signal. That's what I've noticed at least.
Great video Adam and some good finds there. I am surprised you are still using the old coil that LG basically dumped in place of the LG30. I wonder if it would make a difference. Are you going to RCM or Detectival? I am coming from Canada and looking forward to saying hello to the RUclips stars I watch. 😀
Hola amigo, te felicito por tu video y ese lindo lugar para detectar, éxito en tus búsquedas amigo, Amigo me podrías enviar un saludo a mí canal por favor en tu próximo video??, te lo agradecería mucho amigo, saludos cordiales desde chile para usted compañero 🙋♂️🇨🇱💍🗝️⛏️💪👏🤜🤛👍😊
Dilek came out with a video today. She stated the G discrimination is not the correct discrimination to be in. And that her engineer will program it out in the final version. And if you use it in G discrimination mode, it will not work correctly as it was engineered.
Yes, I know. This was recorded two days before that announcement and published the day before. Sadly, predicting the future is not a skill I have mastered as yet...
have to use this new update at the house built 1890 find targets that mine lab 600 or the etrac could not find may be my PI detector could find them deep ones hope i dont dig to china like last target found in the front yard from bottom my foot to knee cap that was 1.13 update
************* Hi Adam. On your first target that was the large iron, it looks like you were using the F disc pattern in Park and Field. That would explain why Park and Field modes weren't showing the large iron. It's interesting though, that BM maxed out the iron side of Ferrocheck on that iron, yet Park and Field showed nothing on Ferrocheck.
Yes, I had to take a few weeks off. First time off in 4 and a half years! I had a video out last week. This is the second one since coming back. I need to balance my commitments better so I'll be aiming for 2-3 per month moving forward 😊🫡
É por isso que eles acrescentaram, rejeição de ferro. Geralmente se trabalha em 2 ou 3 não mais wue isso, porque pode afetar os materiais não ferrosos.
Well Adam i was waiting for an explanation as to why other utubers were finding fault with this programme. We had a great fanfare about how this new DEEP, programme was going to be and in your introduction youv actually contradicted yourself or shall we say backtracked on noktas original statement .you seem to be the nomad thats demonstrated this programme in its beta form which to me is not worth updating to. every target was achievable with either field or park so why add another programme thats not going to achieve anything! .this whole update has been presented badly from the start with nokta not providing a proper video by a proper nokta engineer explaining with the machine how the update is supposed to work. This is what happens when things are done on the cheap.i for 1 will not be updating this programme as in my eyes its a pointless exercise. I cant see a miricle happening in another week before nokta pool all the results in to find its been too big an ask for them. To conclude in future i wouldn't be putting out any further updates without thoroughly testing them yourselves to make sure it doesn't backfire on you. Strong words from me i know but it's meant to let you and nokta know this way of presenting an update must be done more professionally so as not to cause confusion. Thank you.
OK. I'm sorry to hear you've misunderstood. A lot of people are confusing better depth performance for more depth. A subtle but important distinction. At the end of the day you're free to update or not update as you see fit. My job isn't to sell or influence...purely to use, learn and enjoy. All the best as always 👍
Its not a dig at you Adam,but if you look at Dileks early videos saying theyv got a new DEEP programme coming and then this thing turns out to be something else that we as normal users can't seem to suss out plus three prominent utubers with more knowledge about the legend than i ever will have sending out videos saying its not what was expected of the new programme it should send out a strong message to nokta to be more professional in their approach in future which in turn would be better for everyone in future. Cheers!
The update WILL get you deeper targets...by allowing you to access targets that would otherwise have been masked or misinterpreted due to the depth. That is consistent with everything Dilek and Nokta have said about the new mode. It just isn't necessarily penetrating deeper...that's an assumption many have made. So you can now find targets deeper than before, because you're now able to maximise depth PERFORMANCE. Nokta are working on a clarification video based on the confusion people are having, although the release notes are very clear on it. Hopefully that'll help those who haven't read the notes.
Thanks for the video.
Lovely bit o silver that. Your happy laugh said it all. Well done. Ya know watching this I realise I have been forgetting the IR setting on mine will apply it tomorrow. Great test of the update Adam
Have the ultra at the moment... may go for the Legend later on. Great videos. Very informative video
Thanks for the video. I am looking forward to seeing more with the new update. Cheers buddy.
As I use beast mode, I’m still skeptical? I guess we will all learn together. Great video.
The hat on the back of the French coin is a Liberty Cap (phrygian cap). A symbol of liberty in many countries. Cool ring too!
Very Nice.Greetings from Belgium 🇧🇪
Think il wait another couple of weeks before I update my legend, great video Adam as usual ❤
Im not going to update mine. I like it the way it is. Goes deep enough for me
Another great video Adam so pleased for you regarding the ring and coin!
Just a quick hint why the Field and Park didn't hit the target. Its in the discriminated area, coz its iron and in the Biest mode you run wide open. Its easy to see on the Display :-)
I see it the same way, why did you do that or didn't you notice it, then you should re-record the video again and test it under the same conditions
Good catch. I posted the same thing.
Yes, that's exactly what it was.
I can't wait for the beast mode on the beach which may or not work well fantastic video as usual adam . Onward !!!
Sweet adam u legend
Thanks for the video, do not have this machine but some great finds love the ring and French money. Always love too see a halfpence and a complete beaver 🦫 tail!!😎🐓🐓🐓🐓🇬🇧
That's a good looking piece of land. Great hunt great video as always. What a coin! #onward
i dig most every thing been at it over 40 yrs still the junk sounds good
Great recording. I'd recommend setting Audio Gain a bit higher for Beast Mode as it generates really low sound volume when detecting a weak signal. That's what I've noticed at least.
Id like to see beast mode ran with the 6" coil ...think it would help pick out those old deep coins that are under modern trash or mixed with iron?
Awesome video and congrats on the ring what a banger 😊
Interesting stuff Adam, but the beach could be interesting? Cheers.
Great video as always Adam. Congrats on the 925 ring. How nice is it to be swinging with a bit of 🌞 on our backs?
Definitely an improvement on the gale force winds recently 😂
Great video Adam and some good finds there. I am surprised you are still using the old coil that LG basically dumped in place of the LG30. I wonder if it would make a difference. Are you going to RCM or Detectival? I am coming from Canada and looking forward to saying hello to the RUclips stars I watch. 😀
Hi Andrew.
The coil in the video IS the LG30 👍
All being well I should be at Detectival. I'm unlikely to make RCM sadly 😥
@@DTEKTSUSSEX Wow, the coil looks round, it must be the camera perspective. I hope I will be able to say hello at Detectival. 😊
Hola amigo, te felicito por tu video y ese lindo lugar para detectar, éxito en tus búsquedas amigo, Amigo me podrías enviar un saludo a mí canal por favor en tu próximo video??, te lo agradecería mucho amigo, saludos cordiales desde chile para usted compañero 🙋♂️🇨🇱💍🗝️⛏️💪👏🤜🤛👍😊
Dilek came out with a video today. She stated the G discrimination is not the correct discrimination to be in. And that her engineer will program it out in the final version. And if you use it in G discrimination mode, it will not work correctly as it was engineered.
Yes, I know.
This was recorded two days before that announcement and published the day before. Sadly, predicting the future is not a skill I have mastered as yet...
have to use this new update at the house built 1890 find targets that mine lab 600 or the etrac could not find may be my PI detector could find them deep ones hope i dont dig to china like last target found in the front yard from bottom my foot to knee cap that was 1.13 update
*************
Hi Adam.
On your first target that was the large iron, it looks like you were using the F disc pattern in Park and Field. That would explain why Park and Field modes weren't showing the large iron. It's interesting though, that BM maxed out the iron side of Ferrocheck on that iron, yet Park and Field showed nothing on Ferrocheck.
I was in G so it was only *just* outside the range. I'm not used to getting signals that low!
I would have thought Nokta would have told you to run in A discrimination 😊
Nokta only realised it wasn't in the documentation/communication this afternoon. This video was recorded last Sunday and uploaded yesterday 👍
@DTEKTSUSSEX I luckily used in All metal last Saturday, second hole Eddy penny 😊
Disc must be on A - all metal or beast mode doesn't perform well...
Absolutely correct. Nokta only announced that within the last hour or so...this video was recorded on Sunday and released yesterday 👍
Did you ground balance on GB2 Adam
I did. To be honest it barely needed GB1. I didn't have any chatter. But all land is different.
What is the coil size?
LG30 coil 👍
@@DTEKTSUSSEX tnx, wide angle lens and i didn't notice the difference between LG24/30 i have LG30 also and waiting for the Beast coil LG40
It’s been a minute since you made any videos 🎉
Yes, I had to take a few weeks off. First time off in 4 and a half years!
I had a video out last week. This is the second one since coming back. I need to balance my commitments better so I'll be aiming for 2-3 per month moving forward 😊🫡
É por isso que eles acrescentaram, rejeição de ferro. Geralmente se trabalha em 2 ou 3 não mais wue isso, porque pode afetar os materiais não ferrosos.
🤣
Using 1.14 Beta 1 or 1.14 Beta 2?
This was the beta 1. Beta 2 didn't exist yet 👍
Well Adam i was waiting for an explanation as to why other utubers were finding fault with this programme. We had a great fanfare about how this new DEEP, programme was going to be and in your introduction youv actually contradicted yourself or shall we say backtracked on noktas original statement .you seem to be the nomad thats demonstrated this programme in its beta form which to me is not worth updating to. every target was achievable with either field or park so why add another programme thats not going to achieve anything! .this whole update has been presented badly from the start with nokta not providing a proper video by a proper nokta engineer explaining with the machine how the update is supposed to work. This is what happens when things are done on the cheap.i for 1 will not be updating this programme as in my eyes its a pointless exercise. I cant see a miricle happening in another week before nokta pool all the results in to find its been too big an ask for them.
To conclude in future i wouldn't be putting out any further updates without thoroughly testing them yourselves to make sure it doesn't backfire on you. Strong words from me i know but it's meant to let you and nokta know this way of presenting an update must be done more professionally so as not to cause confusion. Thank you.
OK.
I'm sorry to hear you've misunderstood.
A lot of people are confusing better depth performance for more depth. A subtle but important distinction.
At the end of the day you're free to update or not update as you see fit. My job isn't to sell or influence...purely to use, learn and enjoy.
All the best as always 👍
Its not a dig at you Adam,but if you look at Dileks early videos saying theyv got a new DEEP programme coming and then this thing turns out to be something else that we as normal users can't seem to suss out plus three prominent utubers with more knowledge about the legend than i ever will have sending out videos saying its not what was expected of the new programme it should send out a strong message to nokta to be more professional in their approach in future which in turn would be better for everyone in future. Cheers!
The update WILL get you deeper targets...by allowing you to access targets that would otherwise have been masked or misinterpreted due to the depth. That is consistent with everything Dilek and Nokta have said about the new mode. It just isn't necessarily penetrating deeper...that's an assumption many have made.
So you can now find targets deeper than before, because you're now able to maximise depth PERFORMANCE.
Nokta are working on a clarification video based on the confusion people are having, although the release notes are very clear on it. Hopefully that'll help those who haven't read the notes.
@@DTEKTSUSSEX all of this confusion could have been avoided by doing a video in the first place, anyway let's see what nokta Come up with !
Tried be at 1.15, and have to say that it is more stable than field m1 with pitch, but field m1 is deeper anyway