Jeremy you have the best videos, I knew you would be all over the 1.14 version testing it. You give the best explanations on the legend or any detector for that matter. I think i'll keep using the single frequency for now before I download the new version sounds a little complicated from what i've heard so far. Thanks for doing these videos you're awesome at detecting.
Thank you Michael. Ground balancing beast mode does seem convoluted. We should figure it out once we can get some clarification from Dilek on how to ground balance it. Her video was way glitchy during the livestream yesterday, creating a lot of confusion on how to GB the beast mode.
I'm looking forward to 1.14, don't know how often DT will get used though. I too like single frequency, especially in cities. Quietness is bliss. Nice vid, Jeremy.
Awesome! Thanks for taking us along and letting us know what you think of this new update so far… looks like it works well!😀 I’m still running 1.05… I figure to wear out my parks and to do the same as I upgrade up to the newer versions… it’s like getting a new detector every time, and feel like it will help me “learn” more about its performance on spots “I’ve supposedly cleaned & worn out”… Though, I see you can almost never clean an area out of what it has to give… Targets pop out when they want… I’ve learned a ton from the PSSF & grateful!🥇
Every day is a new adventure at the same site. You may think you beat up a spot real bad and then one day the targets flow like a faucet out of the that beat up spot. There is just no rhyme or reason why sites come alive all the sudden.
Hey streak, I have a theory the magnetic field around the earth changes, and causes the ground to light up with targets. A local civil war spot was famous for this phenomenon. A detector dealer friend that’s been detecting since there were detectors said every time they hunted this site near the James River it would be very quiet with signals. The sun would start to set, and bam, deep bullets everywhere. Come back, quiet until sunset. Things going on we don’t understand. Another really smart guy I met said targets get what he called ground lock, or? Targets get masked by minerals one day, wet vs dry. He never figured what caused it, but proved it existed by gridding and remove every single peep of a target. Another day, finds stuff again. It’s a mixed blessing because it saves targets for later digs but discourages you on days that just won’t produce much, lol. Great to see you’re still kicking it!
That is funny you speak about this phenomenon. This is true what you say and I can verify what you say. I just made a video today talking about that same subject. Some days your detector will hit a certain target...some days it wont. There is so many factors that influence the ability to hit a target at a certain time. That is why I always say EVERY DAY IS DIFFERENT AT THE SAME SITE WITH THE SAME DETECTOR.
I compared many targets with Jim's detector and I saw no difference in depth with the DT feature. I did see the difference in how the DT distorts the tones. I did not test out the beast mode because it only is in gold field mode in pitch tones. Gold field program is very unstable in our soil.
@@PaystreakSuperfreak interesting to hear that. I might try it in my soil here in Yakima just to see if there is any difference but I don’t like the idea of it distorting the tones.
I will try beast mode today comparing targets with Walter who uses the v1.11. Just from these initial field tests, I will be sticking with the DT at 0.
The best test is in the field on real targets. How does v1.14 respond to dense modern trash?? How does the v1.14 features respond to near surface targets?? How does v1.14 respond to other detectors?? How does v1.14 respond to targets on edge?? How does v1.14 respond to wet soil?? How does v1.14 respond to high EMI sites?? How does v1.14 respond to fast swing speeds?? Will the v1.14 drain the batteries faster??
Jeremy, is the beast mode just increasing transmit power, which usually works against you in minerals? I need to update mine and try my pounded civil war bullet patch place I test every new machine. I used to dig 12 bullets about every 90 minutes of detecting but in recent years lucky if I get 1 or two. The EMI is so bad, I can barely use the Deus 2 even in single frequency, but the Legend ran pretty stable in 10 kHz, and I popped out an eagle cuff button. Some would say what’s the big deal. Well, I’ve been hitting this place since 1970’s with every detector made and only found a flat button, a NY coat button, and this eagle cuff, in the wide open. I need to get the newer elliptical coil you have and the newer coil stock coil. Mine came with the round coil, which is heavy for me. Thanks for all your testing. Deep there is 6”, deep here, no joke, is 12-17” measured with a pinpointer. If you can’t get around 14” in our good, Sandy ground, you won’t find anything in most battlefields. So much land was cultivated after the war and there’s hut sites over 3’ deep. The deepest one we found was probably where a trench was filled in, stopped digging when up to my arm pits, couldn’t get down in the hole anymore, lol
Beast mode is most likely just a TX boost. Many older detectors had this same feature. The big coils on the Legend make the detector too heavy for a 3 hour hunt. We aint getting coins no deeper than 7" no matter what coil we use here. The minerals mask coin sized targets
I tried DT feature with Lg24 on the dime. It would not hit it yesterday no matter what I did. Some days it hits the dime, some days it does not hit the dime, the same with all detectors. I am not willing to sacrifice a lot of stability for a little depth. Nokta has made ground balancing in the beast mode gold field a bit overcomplicated. If Nokta can work on the tones of the DT feature we might be looking at something here.
From all us Legend owners, thank you, for the hunt and your opinion. Nice RING!!!
I really appreciate you taking the time to explain. I am a noob and this has always intrigued me. Really nice ring. Thx Sir.
You are very welcome
Jeremy you have the best videos, I knew you would be all over the 1.14 version testing it. You give the best explanations on the legend or any detector for that matter. I think i'll keep using the single frequency for now before I download the new version sounds a little complicated from what i've heard so far. Thanks for doing these videos you're awesome at detecting.
Thank you Michael. Ground balancing beast mode does seem convoluted. We should figure it out once we can get some clarification from Dilek on how to ground balance it. Her video was way glitchy during the livestream yesterday, creating a lot of confusion on how to GB the beast mode.
I'm looking forward to 1.14, don't know how often DT will get used though. I too like single frequency, especially in cities. Quietness is bliss. Nice vid, Jeremy.
Single frequency is the winner!! Single frequency on the Legend has always been deeper and much more stable than multi. Fantastic!!
very cool ring
Awesome! Thanks for taking us along and letting us know what you think of this new update so far… looks like it works well!😀 I’m still running 1.05… I figure to wear out my parks and to do the same as I upgrade up to the newer versions… it’s like getting a new detector every time, and feel like it will help me “learn” more about its performance on spots “I’ve supposedly cleaned & worn out”…
Though, I see you can almost never clean an area out of what it has to give…
Targets pop out when they want…
I’ve learned a ton from the PSSF & grateful!🥇
Every day is a new adventure at the same site. You may think you beat up a spot real bad and then one day the targets flow like a faucet out of the that beat up spot. There is just no rhyme or reason why sites come alive all the sudden.
Hey streak, I have a theory the magnetic field around the earth changes, and causes the ground to light up with targets. A local civil war spot was famous for this phenomenon. A detector dealer friend that’s been detecting since there were detectors said every time they hunted this site near the James River it would be very quiet with signals. The sun would start to set, and bam, deep bullets everywhere. Come back, quiet until sunset. Things going on we don’t understand. Another really smart guy I met said targets get what he called ground lock, or? Targets get masked by minerals one day, wet vs dry. He never figured what caused it, but proved it existed by gridding and remove every single peep of a target. Another day, finds stuff again. It’s a mixed blessing because it saves targets for later digs but discourages you on days that just won’t produce much, lol. Great to see you’re still kicking it!
That is funny you speak about this phenomenon. This is true what you say and I can verify what you say. I just made a video today talking about that same subject. Some days your detector will hit a certain target...some days it wont. There is so many factors that influence the ability to hit a target at a certain time. That is why I always say EVERY DAY IS DIFFERENT AT THE SAME SITE WITH THE SAME DETECTOR.
Pay Streak, Science Super freak, lol
Love your channel buddy
Can’t wait to see your results with the new update vs jim’s machine. I will hold off on updating until I see more of your results jeremy.
I compared many targets with Jim's detector and I saw no difference in depth with the DT feature. I did see the difference in how the DT distorts the tones. I did not test out the beast mode because it only is in gold field mode in pitch tones. Gold field program is very unstable in our soil.
@@PaystreakSuperfreak interesting to hear that. I might try it in my soil here in Yakima just to see if there is any difference but I don’t like the idea of it distorting the tones.
Ring time baby!!! Might pull the trigger on the legend here shortly. Still looking
Awesome!!
Hey Jeremy, agree. you can see 6 gives me a bit of a grunt as well in my last video, 0 is cleaner.
I guess you can say it was giving you a ..........iffy signal??
@@digginggopher 😆
I will try beast mode today comparing targets with Walter who uses the v1.11. Just from these initial field tests, I will be sticking with the DT at 0.
Would like to see a test garden test on deeper targets to see if what nokta claims is true on the dtif.
The best test is in the field on real targets. How does v1.14 respond to dense modern trash?? How does the v1.14 features respond to near surface targets?? How does v1.14 respond to other detectors?? How does v1.14 respond to targets on edge?? How does v1.14 respond to wet soil?? How does v1.14 respond to high EMI sites?? How does v1.14 respond to fast swing speeds?? Will the v1.14 drain the batteries faster??
Is draining the battery faster
@@fishdetectit sure is.
Jeremy, is the beast mode just increasing transmit power, which usually works against you in minerals? I need to update mine and try my pounded civil war bullet patch place I test every new machine. I used to dig 12 bullets about every 90 minutes of detecting but in recent years lucky if I get 1 or two. The EMI is so bad, I can barely use the Deus 2 even in single frequency, but the Legend ran pretty stable in 10 kHz, and I popped out an eagle cuff button. Some would say what’s the big deal. Well, I’ve been hitting this place since 1970’s with every detector made and only found a flat button, a NY coat button, and this eagle cuff, in the wide open. I need to get the newer elliptical coil you have and the newer coil stock coil. Mine came with the round coil, which is heavy for me. Thanks for all your testing. Deep there is 6”, deep here, no joke, is 12-17” measured with a pinpointer. If you can’t get around 14” in our good, Sandy ground, you won’t find anything in most battlefields. So much land was cultivated after the war and there’s hut sites over 3’ deep. The deepest one we found was probably where a trench was filled in, stopped digging when up to my arm pits, couldn’t get down in the hole anymore, lol
Beast mode is most likely just a TX boost. Many older detectors had this same feature. The big coils on the Legend make the detector too heavy for a 3 hour hunt. We aint getting coins no deeper than 7" no matter what coil we use here. The minerals mask coin sized targets
Would like to see if it helps with that dime in your front yard curb strip. Thanks
I tried DT feature with Lg24 on the dime. It would not hit it yesterday no matter what I did. Some days it hits the dime, some days it does not hit the dime, the same with all detectors. I am not willing to sacrifice a lot of stability for a little depth. Nokta has made ground balancing in the beast mode gold field a bit overcomplicated. If Nokta can work on the tones of the DT feature we might be looking at something here.
guess i will keep 1.14 update am running older leagon with metal shaft for the price could pass up used one with 2 pairs of head phones
I will update to the newer software today. I will give it a go!
How well does that coil do paystreak?
LG24 coil is the only one I need. LG30 is a boat anchor and LG15 has the coil ears way too far back to make it an uncomfortable hunt.
@@PaystreakSuperfreak thanks for the reply
LG24 is not designed for depth. Get the lg35 on
The LG30 already makes the Legend a boat anchor, I could only imagine dragging around the boat too!!
Atualizar para 1.15
아메리칸 ㆍ할배들이 많이 하네
탐지
Lots of young people metal detect too.