Thanks for showing step y step updating the legend Steve. I’m not a computer guy with your step-by-step on how to do. It was really easy thank you so much.
Oh I saw the neatest thing today while visiting my daughter in Va Beach today. Momma duck and 12 babies trying to get acoss Red Mill Shopping center to get the water! Good volunteers were trying to help her...hope she made it!!
Excellent video gig! I remember way back when the legend first came out, I was pulling my hair out, trying to get it to install software. But you’ve explained it so clearly it’ll be a simple chore doing it now. I’m gonna wait until the final result is out and install it. Again, thanks for this video! 👍👍
*************************** Hi Gig. I was able to get out yesterday and finally do some proper testing with DT and BM. I was experimenting in a public park with low mineralization. To start though, nowhere in the update description does it say that DT or BM goes deeper. The description states that these modes are designed to better separate nonferrous targets from the ground signal and ferrous objects. DT was working well in my testing. It very often turned a one way signal or an iffy one way signal, into solid 2 way nonferrous hits. It normally did so with clean audio and accurate IDs. BM worked well on about 30% of the fringe targets. With the other 70% of fringe targets, it either did no better, or did worse than Park Mode. BM also severely up averaged nonferrous targets, but that effect was more pronounced on lower conductors like foil. From what I've read, other than the depth thing, many are expecting BM to give accurate audio and ID, but I don't think that's possible. I mean, BM is designed for fringe targets. Fringe targets don't contain enough information to have accurate audio and ID. That is the very nature of fringe targets. That's why I don't think BM can provide better ID and audio than the other modes. All it can do (sometimes), is give an "on" audio response to indicate a nonferrous target, when other modes can't.
That is the best explanation of how to get into it that I have seen so far! I just updated, did the reset and and now good with the new update. Thanks.
I just purchased the Legend with the LG 30 coil 2 months ago, I have 50 hours on the machine, NOT very impressed with this machine. Still love my 800 thinking on buying the 900.
It’s funny, beast mode sounds like it will blast down to below the plow line, lol. Hats off to Nokta for actually appreciating their customers and trying to please them, instead of selling crappy quality at a huge price like the company from Down under. Loved their technology, hated their crappy quality and even worse ergonomics. Thanks Nokta and the Gigmaster.
It’s funny, Legend changed and became a breeze to update, Deus changed from easy to almost impossible, lol. I used to update deus 1 like a breeze. Tried to update my deus 2, it locked up and I had to send it back to fix it. I just can’t get the hang of all this technology
Hi Steve......When you apply the dt, or the beast mode, when you shut off the machine, then turn it back on, do you have to keep turning (dt and beast mode) on? Or is it global and stay on?? I updated to the new software and found out my Legend was chattering like crazy. Not too excited if that was the result of upgrading!! It was the quietest machine under powerlines before..... I didn't try single frequency, which I should've!!
I believe the dt will stay where you save it. The beast mode was still there when I went to gold mode but you can switch it off by hitting the frequency button. It is a mode of its own. Not on unless you switch to it.
With what nokta has give us with the legend. They have set the bar high, this mode doesn’t deserve to be on the legend. Hope they figure things out for the alpha
Thanks for showing step y step updating the legend Steve. I’m not a computer guy with your step-by-step on how to do. It was really easy thank you so much.
Glad it helped
Great video, ordered the legend last night and it will be delivered today. Hello from Newport News
Great machine, congrats
Thank you Gig for sharing the update with us.
Sure thing!
Thanks for that update Gig ! I will update mine and do a video on my results. I need to get more time with my Legend and less with the Nox!
Oh I saw the neatest thing today while visiting my daughter in Va Beach today. Momma duck and 12 babies trying to get acoss Red Mill Shopping center to get the water! Good volunteers were trying to help her...hope she made it!!
So cool!
@@Gigmaster It made me miss Daisy!
Excellent video gig! I remember way back when the legend first came out, I was pulling my hair out, trying to get it to install software. But you’ve explained it so clearly it’ll be a simple chore doing it now. I’m gonna wait until the final result is out and install it. Again, thanks for this video! 👍👍
Rock on!
Thanks Steve 👋👍
Thanks mate...thats a GREAT explanation, look forward to the beast mode test. Love ya accent btw 🙂
***************************
Hi Gig.
I was able to get out yesterday and finally do some proper testing with DT and BM. I was experimenting in a public park with low mineralization.
To start though, nowhere in the update description does it say that DT or BM goes deeper. The description states that these modes are designed to better separate nonferrous targets from the ground signal and ferrous objects.
DT was working well in my testing. It very often turned a one way signal or an iffy one way signal, into solid 2 way nonferrous hits. It normally did so with clean audio and accurate IDs.
BM worked well on about 30% of the fringe targets. With the other 70% of fringe targets, it either did no better, or did worse than Park Mode. BM also severely up averaged nonferrous targets, but that effect was more pronounced on lower conductors like foil.
From what I've read, other than the depth thing, many are expecting BM to give accurate audio and ID, but I don't think that's possible. I mean, BM is designed for fringe targets. Fringe targets don't contain enough information to have accurate audio and ID. That is the very nature of fringe targets. That's why I don't think BM can provide better ID and audio than the other modes. All it can do (sometimes), is give an "on" audio response to indicate a nonferrous target, when other modes can't.
Thanks! Good info
Easy update!! 👍😎👍
That is the best explanation of how to get into it that I have seen so far! I just updated, did the reset and and now good with the new update. Thanks.
will not put update 1.14 yet untill bugs are worked out like in the past things happen 1.13 works just fine
I just purchased the Legend with the LG 30 coil 2 months ago, I have 50 hours on the machine, NOT very impressed with this machine. Still love my 800 thinking on buying the 900.
why does my 1 euro coin 12 inch not higher
It’s funny, beast mode sounds like it will blast down to below the plow line, lol. Hats off to Nokta for actually appreciating their customers and trying to please them, instead of selling crappy quality at a huge price like the company from Down under. Loved their technology, hated their crappy quality and even worse ergonomics. Thanks Nokta and the Gigmaster.
It’s funny, Legend changed and became a breeze to update, Deus changed from easy to almost impossible, lol. I used to update deus 1 like a breeze. Tried to update my deus 2, it locked up and I had to send it back to fix it. I just can’t get the hang of all this technology
Thanks for sharing
You only tried the DT setting and not the actual Beast Mode hidden in the Gold Field mode?
Not yet! I cut it on but was not sure how to manipulate.
Hi Steve......When you apply the dt, or the beast mode, when you shut off the machine, then turn it back on, do you have to keep turning (dt and beast mode) on? Or is it global and stay on?? I updated to the new software and found out my Legend was chattering like crazy. Not too excited if that was the result of upgrading!! It was the quietest machine under powerlines before..... I didn't try single frequency, which I should've!!
I believe the dt will stay where you save it. The beast mode was still there when I went to gold mode but you can switch it off by hitting the frequency button. It is a mode of its own. Not on unless you switch to it.
@@Gigmaster Beast mode is only good on Gold mode?? I guess I could try it and find out!! Thanks for the reply. It's global!!
Beast mode is a separate mode accessed through the gold mode. Good luck!
i need a up date with a load of money.
Hello Gigmaster
With what nokta has give us with the legend. They have set the bar high, this mode doesn’t deserve to be on the legend. Hope they figure things out for the alpha
They ARE listening! Not like some detector companies.
I'm still at 1.11 version on my Legend, do you recomend me to update the beast mode Steve???; by the way my Legend works very good with 1.11 ❤😊
I like the new dt function but not sure on the beast yet.
I'm on 1.11 also. I'm doing just fine with this update. So I'll wait a little bit to see the reviews. I'm sure I will put it in out of curiosity, lol
Air test,, hmmm.
What about in the ground? Hmm
I don’t like it at all should of just made the sensitivity more
Don't think I'll update yet, that's not impressive by no means!!
Lol, every inch counts. But to early to tell, I'm just concerned to see how noisy or quiet it is