How to fix your dishwasher. Quick and easy repair. Overflow error. Cleaning the sensors
HTML-код
- Опубликовано: 17 май 2024
- How to fix your dishwasher. Quick and easy repair. Overflow error. Cleaning the sensors
Try this fix before looking for a “handyman”:
- This “repair” applies to Electrolux or related dishwashers, but I’m almost sure it works for all dishwashers.
- It’s about the “Overflow sensor (Anti-Flood device had been activated)”.
- What’s happening? The wash cicle is stopped, the empty pump is running and you hear beeps and see LEDs flashing.
- What’s wrong? The water level sensor gets clogged, it doens’t stop the water, the extra water flows through a pipe in a tray under the dishwasher, where it activates the Overflow sensor that stops the water supply and turns on the empty pump.
- So, we have to cleam the water level sensor.
Music: www.bensound.com 
Хобби
Hello. I just removed the front under plate and removed most of the water in the bottom with small bathroom towels and then let a fan blow for a hour just in case. Power on and everything was ok. Thanks for the tip that it was not necessary to take out the machine. Saved me a lot of time.
Spent an hour and a half following this guide, mine didn't have the sensors at the bottom but I gave the pipes and insides a good clean anyway. Soaked all the water up out of the bottom with paper towel and it's working again! Thanks a bunch dude!
Thanks for this, had the error last year and had a technician from the company + a regular plumber to get this to stop.
Today it took some time, but I managed it exactly like you indicated 👍
You Sr. .... You are a Real DIY Master Engineer. Thank you Very, very Much. Old School Master
Thank you!! Couldnt afford anyone to come take a look but now iv solved it myself with your guidance. Very happy.
Thank you!! Different brand dishwasher, but same issue - now resolved. No more washing dishes by hand and no $$$ spent on a repairman 👍
Amazing! I'm glad it worked.
Brilliant, just sorted mine. After I cleaned the sensors I filled the sensor bowl with hot water and left it for around 30 mins. Dishwasher on now as I write this.
Thanks man, it seems that it worked, great video!
Amazing , thank you !!!!!! I opened front panel at the bottom and cleaned sensors with soapy water only. Took 15 mins
YOU ARE THE GOAT!!!! I almost bought a new diskwasher!!!
I have to say thank you for saving me money on a handyan but also agreivation from the other half, worked a treat on our AEG integrated unit!
It worked! The dishwasher is working, thanks for such a good and clear video
Thanks! Just fixed our dishwasher thanks to this!
Thank you, saved me the cost of a workman or a new one !
I just wanted to take the time to say thank you for this video. As you probably saved me a lot of money. Easy to follow step-by-step guide. Worked after perfectly. Thanks again
Thank you so so much for this!
May the good Lord bless you for me.
I followed this direction, though my dishwasher is a different brand and it began working perfectly again.
I am so excited.
You saved me stress and money.
Thanks once again.
Thank you so much you just saved me a £99 call out fee! My dishwasher would run then stop and flash. I had a look under it (front panel only, didn't remove the sides) and noticed one of the tubes had fallen off! So I reconnected it & also soaked up the puddle at the bottom just to be sure, now it's running like a dream! 😀
Very helpful video. I found out that my Currys CDW45W18 Essentials Dishwasher was showing these very same symptoms and got it fixed. Many thanks. 👍
Nice video, but you could do it in an easier way, without moving out your dishwasher. I did it yesterday on mine, and worked perfectly hassle free. Just unscrew the metal panel underneath the door. This will allow you to reach the anti flood tray and empty it with a sponge or cloth. No need to move out your dishwasher👍👍👍
Yes, you are right
Thanks for the help. i Simply shutdown the machine and dried up around the sensor. This saved me a LOT of money. So Many thanks to you guys 👍👍
@@johansebastiannordstrom8845 glad it helped you
I checked under mine. There was no water. And the cencors Are dry. I still get 3 pipa. What else can it be
This! Life savers!!
Worked perfectly. I only needed to take the front baseplate off and then soak up the water with paper towels.
Many thanks!
Thank you very much! Followed the instructions and solved the problem on my Electrolux dishwasher.
Thank you very much. I repair it my dishwasher by myself. Thank you very much for this video 💛💛💛💛💛💛
Was going to follow your instructions but decided to try soaking up the water from the pool under the filter first…. It worked great, so didn’t have to pull it out and take off the side etc. thanks for the video 👍
Thanks so much for this great tip. I was at the point of getting someone in or buying a new dishwasher.
Absolute legend. This worked a charm. It was an IKEA hjälpsam dishwasher for reference. Exact same problem. Thank you!!
Great! Thank you!
Thank for this Video I was able to fix my dishwasher following your steps👍👍👍👍👍👍👍
Thank You soooo much, i turned it to 45* and I took the excess water and it worked! I have a Gorenje dishwasher.
Same here, also Gorenje dishwasher. Turn it on its side, let water run out and it works perfectly now
Thank you, such a great piece of information 👍
Worked for me as well! Thank you very much! Very nicely explained!
Mă bucur 😉
Thank you a lot for your video!!! I could not get access to the sensor from the hole inside so I screwed out the front panel and from the I could take out the sensor (connected with an electric cable). On the other side of it I fount a 10-mm-thick layer of fat. After removing it my dish washer is working perfectly! Thank you again!
Just took the sidepanel off and removed the water from the tray on the bottom and now it works again. Took like 15 minutes. Thanks a lot!
Thank you!
If the root cause isn't fixed, you're likely girls to have to do it again soon
legend, this seems to have solved my problem. AEG suggested to send a technician for €150 quid. You're a modern day robin hood!
🤣🤪 Thank you! Glad it helped.
Really helpful! Thank you, legend!
Thank yoi so much. My partner is away for a while so attempted this myself. I usually leave these things to him but your video was so clear and easy to follow that i thought why not?! Works a dream now.and my self confidence has had a little boost also. Thanks a bunch.
Thank you.
Thanks, it worked for me! I already cleaned the sensors but I still had to remove the water underneath. I used the bottom front panel to reach the water. Once you get the hang of it, it was not so hard. anymore.
Great video. I followed all your steps and it still happened. So I did it again, but left the sides off to see what was happening. Turns out there was a hole in my drainage pipe and that is what was flooding under my unit.
This is a great video, thanks for helping me fix the problem on my unit! The issue on my dishwasher is that one of the internal hoses had come off where it connects to the outside of the sump, just had to reconnect it and mop up the water and it's running again
This helped us fix our dishwasher, thanks for posting!
Glad to hear!
Thank you so much from Ireland.... was about to call someone when I came across your video. Working perfectly now....
Love you too Ireland! 🤪
This totally worked for me.
Much appreciated 🙏
I'm glad to hear 🙂
Thank you very much. It worked for me. Saved some time and money!
Thanks man. I solved problem on my machine !! Many thanks
Awesome solution thank you very much
You're a fucking legend! Just got my bad boy up and running thanks to you, saved me from the handyman ripoff. :))
🤣🤣🤣 Great!
ALL HAIL THE LORD OF THE DISHWASHERS.
Worked for me🙏🏼 thanks!
Thanks, very helpful video!
Thank you so much!
Thanks a lot for this video. Electrolux or/and IKEA dishwashers flood error - sensor and water collecting tray can be accessed by front plate just under the door, only 6 screws. Collect water, clean sensors inside as in video and voilà, don't need to move dishwasher at all, or to open side panels.
Ikea Velgjord (Elextrolux) with i20 (drainage) error intermittently. approx 6 years old.
Solved by flushing out the pressure sensor with a big syringe-and-hose using a degreaser solution. A big black and white "booger" came out of the sensor hole, so that made it kinda obvious as soon as I saw it :)
For now everything runs smoothly again. Very glad I didn't have to go inside the machine
Thank youuu 🙏🙏 but yes, indeed our model also allows to fix this without removing the side panels, just the front lower panel. Also instead of syringe we used a sauce bottle to spray plain water. Some gunk came out and now it's washing again
Thanks mate this worked 👍👍
I never leave comments on RUclips but I had to just say thank you for this. It worked perfectly and saved me a fair few quid in the process! (Zanussi dishwasher for reference).
Thank you!
Tray draining did the job. Thanks
Glad it worked. But it will happen again. Try to clean the sensors too next time.
For a water squirting device to clean the sensors - will a cordless pressure washer damage the sensors?
I have just fixed mine. The dishwasher drain was running continually and wouldn't shut off, with the sump completely empty. I removed the strainer and steel tray to expose the sump hole. Then I got the garden hose and attached it to the outside tap and turned it on, with the nossle shut at the other end. Without removing any other panels on the side or front, I sprayed the sensors carefully a couple of times intermittently, from the garden hose nossle, whilst allowing the drain pump to empty the sump in between efforts, to give clear access to the sensors, with the spray, on each attempt, to clear the sensors out. After three spraying actions the sump pump stopped after the sump was completely empty and obviously the sensors in the sump hole were now clear of whatever was blocking them. Be careful not to put too much water pressure on the sensors from the garden hose nozzle, as it is generally over 2 bar or 28 psi. Only spray the sensors gently. My dish washer is a zanussi.
If it had not cleared as described previously, I would have poured kettle hot water into the sump hole to melt any fat, then returned to the garden hose method again, whilst still hot. Good luck with yours ! Another tip, if your control lights do not come back on afterwards, turn the unit off and then back on again at the wall. The usual tip for any computer or chip controlled mechanism to re-set it.
Thanks this video helped a lot ❤
Thank you so much.
I have a Gorenje dishwasher displaying Error F54. According to the manual, it requires a technician to solve the issue at hand.
Watched your video and tried a similar approach. My dishwasher did not have any side covers to remove. So i just tipped the dishwasher in an 45 degree angle to let all the water drain out from the overflow tray.
Then using a steamer, I cleaned up the sensors and small holes like in your video.
After assembly, it runs again and the pump is not longer running mad. :D
I hope the solution will last for some time.. :)
Great! For me it lasted for 3 years
Thank you very much! It worked perfectly to me as well.
Glad it did! 🙂
Thanks mate, this worked for my Westinghouse dishwasher displaying “F1” fault
Helped me and worked 💪🏾
thanks for the advice it worked fine and now the dishwasher is working fine and the fault is gone
Thank you buddy!!
I did without put moving the dish washer but cleaned the train and drained it so far so good
Omg it worked 😭❤️❤️❤️ thank u!
Thank you for the video. You fixed my dishwasher😁
Glad to hear that! :)
Than you. Very useful
Above all, love the soundtrack 😉
Thank you very much for this video. It helps me solve my problem and look like superman here at home :D Just some information for someone that comes after me. My dish is a zanussi zdt12011fa built into the cabinet and it has a screwed part at the bottom that comes out. With the removal of this part is possible to clean and remove the water from the bottom without having to remove all the rest and take if of the cabinet.
I’ve done this (just took the front panel off) and it did the trick. But won’t this just keep flooding and setting it off in the future? There must be a leak for it to have done it in the first place no?
I'm going to try now, already cocked my machine over 45degrees and flooded my kitchen floor TWICE today trying to fix it.
Thank you so much mate this has made me the manly man in the house right now Fixed!!! 🙌🏻
🤣 Great! Thanks for the comment!
Thank you so much for this video it rellay helped me fix the issue, so far it seems like my dishwasher is working perfectly again!!! Only question, how long could it take before this happends again?
For me it happened again after 2-3 months or usually after 1 week unused.
Thanks a lot man! It has worked for us too
Great to hear that !
Worked 🎉thank you
bravo got to give credit where credit is due
I am so thankful for your help , this worked for me , you are awesome !!!!
Great! Glad to hear that!
@@naturetravelandfood2231 what do you think causes it? My filter was quite grimy gunna make a point of cleaning it more on a regular basis
@@meggyfrome8400 I suspect that some kind of plaque is forming on the water level sensor.
Thanks i fix mine with your video
I completely removed the machine to remove the underplat where the water was sitting, and the floater that engages the microswitch to in case of to much water was full of slimy stuff that made it float quicker up so for the people doing it the easy way try and check that it clean. Thanks
Thanks!
My wife and I thank you!
Thanks for this video just had exact same problem and now fixed! Cheers 👍
I'm very glad to hear that 🙂
Thanks a lot!! I also never comment on videos, but I fixed the issue following your instructions. BTW To clean the sensors I used simple water bottle and kept spraying.💪
Thank you 🙂
That is also what I did and it worked for me!
It's working, thx alot 🙏
Glad to hear! 🎉
Thanks for the video, it worked for me on another Electrolux model. However, before I saw your video I took out that black piece that can be seen on your video at 5:04 and I can’t put it back. I guess I shouldn’t have. Is there any trick for putting it back? I took the two small projecting parts into the two holes, but they do not seem to go in full length. At least, this black piece does not stand there firmly, falls off very easily. Also, I have no idea where the third small part on the back goes into. So, just wondering if anyone else took out this black piece and knows how to put it back. An idea? Would greatly appreciate your help.
Sorry, Can't help you with that :(
Sorry one question ! For the candy cmls 1252/t if the sound error is continuos what is the method for the fix it!?
No problem. I couldn't find too many references on Candy dishwashers. Maybe these links will help: www.elettro-domestici.com/articoli-elettrodomestici.asp?id=475 and capitalrepairs.co.uk/news/candy-washing-machine-error-codes/
dwl-dea701-b indesit model user : Had same error. i did nearly all what you did - did not help. I took side panels off drained it again, used hair drier to dry it better, left it for 2 days, after 2 days i turned it on - it displayed f01 but because there was no water it could not pomp anything- i switched it off, switched on - and used normal program, took a torch and it turned out that this model has badly designed outlet hose and it cracked in 2 places, ordered new hose - 10 pounds with delivery and I am waiting for it to come. What worries me now is - i have corroded parts underneath and it was factory s fault , i will change hose but the rest is stil rusty and it will die sooner or later without my fault...
thank you ! we followed your instructions and the dishwasher is back to normal!
At 3.32 what is the clear container with the orangey coloured liquid. Just curious. Haven't found the tray where the water goes if it doesn't drain. But fairly certain my anti flood warning has been triggered when dishwasher moved from brother's house to my own. Worked fine with him but stops 1 minute in and warning lights suggest water won't drain. No reason to be hardware fault. Moved safely and carefully. I assume I've triggered some switch somewhere.
Or at least my tray seems dry, assuming I'm looking at right section
The orange liquid is something internal of the dishwasher , maybe some processed salt for decalcification.
The tray where the excess water goes is always in the most lower part of the dishwasher. If the tray is dry you have another problem.
Try to pull the dishwasher out of it's place 10cm and run it again. Maybe the intake and drain pipes are too crowded between the dishwasher and the back wall. Some dishwashers are very sensitive about this. This happened with my new dishwasher.
Tray dry. Pulled dishwasher out and empties standing water from pipe. Thought I was onto a winner. It ran longer than ever but refuses to actively drain. Water flows out correct tube but unable to move adequately against gravity. Eventually cycle stops and standing water remains inside. Have to manually drain waste water into a bucket. I have reached the end of my tinkering me thinks. Amazed if it's a defective pump as my brother 'swears' it was working few days prior. It was sideying while transported. Can only assume something has messed up at this point.thanks form you reply.
Noticed too that water seems to actively travel through that orange stuff and makes sense that it has something to do with softening water hardness (or salt thing) or some other form to filter incoming water.
@@ryanodonnell1007 sorry, I'm out of ideas. Please check the user manual and see what the beeps mean. 2 beeps mean something, 3 beeps something else and so on. This beep coding can give some clues.
Mersi pentru tutorial. Cum pot sa scot capacelul acela negru care este langa senzori, ca sa pot accesa palele pompei, este posibil acest lucru la Electrolux? Am vazut ca si asta poate sa fie o problema, blocarea palelor de la pompa din cauza mizeriei. Mersi.
Care căpăcel? Spune-mi la ce minut:secundă apare.
@@naturetravelandfood2231 La minutul 5:13 e un capacel in dreapta acolo, aproape fata in fata cu senzorul pe care il cureti si am vazut ca la unele modele de masini de spalat vase se poate scoate, dar nu stiu cum, banuiesc ca in spatele capacelului se vad palele de la pompa de apa. Eu am eroarea .20 (aparatul nu evacueaza apa), acum incerc sa fac tot e ai zis in video...poate reusesc sa scap de eroare.
@@Mobicord dacă nu evacuează apa probabil e de la pompă. Da, cred că acel căpăcel duce la pompă. La mine nu făcea decât sa evacueze apa 😁
Mai simplu decât să scoți acel căpăcel cred ca scoți carcasa laterala să ai acces la pompă și verifici dacă vibrează / funcționează. Dar atenție la curent! Eu m-am "ciupit" de câteva ori
I’ve cleared the flood and switch is down but pump still keeps going and no error codes? 18:24 10/11/23
If your lights keep flashing, you need to reset the system after the error. Hold the function button down and turn it off and back on again. Mine only worked after doing that!
Man, you're awesome!!!
So, I opened the furniture, I wiped the spider web, I found a loaf of bread, then I opened the front tablet under the door. There was not much water.
From there you can't see that valve that blocks the water leak, then I cleaned the sensors area with a kharker steamer, then I wiped all the excess water collected there.
I started the dishwasher, in the first phase the pump ran empty again for 15 seconds, then, miraculously, it started to draw water and life returned to normal.
My wife says I'm a genius.
He doesn't know our secret!
U made my day!
Ti iubesc pt clipul pe care l-ai facut
in cazul in care te pricepi si la moatore! am un OM642, dupa fiecare regenerare are o usoara vibratie/tremur la relanti, ce-o fi ?
🤣 Verifică bucșele relantiului 🤪
I had a similar problem
My dishwasher wouldn’t drain so I cleaned the filter and emptied the water out with the nozzle from a carpet cleaner
Unfortunately the tray underneath had filled with water stopping the machine taking on water so I pulled the machine out and decided to tip the machine forward emptying the water on the floor and mopping up with towels saving having to take the side panels off
Kind of a life saver, I would become a single father if I don't fix my "Heinner" machine
Try using a turkey baster to remove water from the sump.
Any reason you can't use a wet dry shop vac to remove water?
story time because im veeeeery stupid. i knew that dish soap is not allowed in the dishwasher, but i thought it was like a multiple time mechanical thing, not that i would drop a drop of it and the machine would kill itself. so my kitchen was full of foam a few minutes later, i killed the electricity cause i panicked. i also live in a rented apartment so i never wanted anyone to know that i was so fucking stupid. long story short, your dishwasher is the exact same model as mine and this video worked like a charm. cheers a hundred fucking times :)))))
disclaimer: i live in romania and this country is known for "why screw a screw when you can put some adhesive" so my dishwasher isnt coming out BECAUSE ITS GLUED INTO THE CABINETS AND THE COUNTERTOP so I can't take it out.... so i hoped that unscrewing the lid below the door would be enough and it was. anyway. thank you so much for this! you saved my embarrassment :))))
am dat acum pe canal si am vazut o ciorba...esti roman?? :))) cu atat mai mult, multumesc enorm!!! 🤣
Cu plăcere! Data viitoare spală fără detergent decât cu detergent necorespunzător 😉
@@Natcovers small world 😬
m am gandit ca sunt 2 oale la clatire, nu bag pastila..... never again :))))
@@Natcovers 🤣
I have a feeling the antagonist of the story of the lost screws is located at 1:40 mark 😺
🤣 The lost screws mean less work on the next cleaning 🤪
had this exact issue on different model.. solution worked but I did the rookie error or running a cycle with a bunch of dishwashing liquid inside.. ended up with suds everywhere :p :) :)
(suds leak ended up being a good thing though because it revealed my bottom door seal is starting to fail)