AEG Electrolux dishwasher i30 error (flood protection) workaround fix
HTML-код
- Опубликовано: 15 дек 2020
- AEG dishwasher (model F77011M0P) drain pump started running constantly when dishwasher was off. Manual water valve in faucet was open and machine was slowly leaking water in. Water filled the bottom of the machine and flooded to secondary tray under the machine where the flood sensor (floating styrofoam sensor) is located. This activates the i30 anti-flood protection mode.
The cause seems to be that "safety valve" in water inlet hose is not fully closing, thus allowing water to leak into the machine. Replacing the hose with valve costs like 200 eur+ so we're planning to replace the entire machine instead. EDIT: We bought a new machine (different brand) in 4/2021 after about 2 years since the first occurrence of this i30 problem.
You can keep using the old "leaking" machine when manual water input valve is closed after every wash.
KNOW THE RISKS! If you forget to close the manual valve and there's long electricity outage or drain pump breaks down or inlet valve starts leaking more water, you might get wet floors! - Наука
Great tutorial! Joining the ranks of those that saved a call to the technician (and probably 100 pounds) for what was a 15 minutes job. I owe you a pint!
Hi Mikko, thanks for the tutorial, worked perfectly, I owe you a beer. First I visited AEG's official site, but their only advice was to call a licensed service technician.
Thank you so much! You went direct to the point and saved me a call to the technician!!! I owe you a beer!
Thanks mate... you just saved me £200 and lots of washing up on Christmas day 🙌
Thanks for the video. Saved me a nightmare at 9pm. I ended up just getting every spare towel in the house and tipping the dishwasher over to empty the slowly, but got the same result.
One of the most effective tutorial I've ever found on the web. Thank you so much
Mikko You’ve just saved me with all the hustle. God blessed youuuuuuuuuuuu!🙏🏽🙏🏽🙏🏽🙏🏽😘
Eres un genio! Me has ahorrado un buen dinero, pero lo mejor es decirle a mi señora que no llame a su papá a arreglar los problemas técnicos de casa. Gracias por salvar mi orgullo, jejeje!
Thank you. You solved my problem. I only used kitchen towels to clean the water and it still worked.
Thank you so much ❤️
First time in my life I fixed something by myself 😃
With your help of course ☺️
You saved the day and few hundred dollars. Thanks mate!!
Riesen dank für dein video hat mir eben mein kopfschmerz genommen nach 5 minuten lief der hobel wieder und hat viele kosten gespart 👍👍
Just fixed the problem following your tutorial. Thanks very much.
Thank you very much. You saved me from a big trouble!
Great save dude. Saved me 150 quid service and inspection
Thank you. The dishwasher works again. I have Electrolux, different brand and same error. Thak you very much.
Saved the day! 😁 Thanks for posting
Thank u very much it was amazing, you maid my day today
Worked perfectly, thank you so much!!
Fixed my problem, great video!
🙏you save my Day ....your idea and you art how you do tha video was original and very practic.Vielen Dank You are the best.👍👍👍🙏🙏🙏
You saved the day, thank you mate!
Thanks all. I have done it! It’s works! But I used sponge.👍🏻
Thanks for the video. It was really useful!
Fixed! Bloody brilliant. Thank you.
Thank you very much Mr. Auvinen. This morning I've got the i30 error and your video saved me some money. Keep it up!
Thank a lot for this tips ! I’ve just resolved it 🎉
Thanks mate! You saved mycket life!!😊
Děkuji, opravu velmi pomocné video!
THANK YOU ! amazing tutorial and it saved my life and money haha
Thank youuuuu soooo muchhhhh!!!!!! You Are a hero!
Perfecto, tenia ese error. Abrí la parte de al frente, saque el agua y funciono.
P grande sei il numero uno mi ha risolto il problema
Very useful video , thnx 🤘
I have the AEG aeg ffb63806pm with the same i30 error. I did the same steps. The front of the washer was harder to get off because I have a different model non the less for now it seems fixed. Thank you 💪
Well the problem came back the next day 😅
That's the case also with our machine because input valve is leaking water into machine (while machine is off) as shown in video with wet paper. This triggers i30 error if manual water valve is left open for a day or such. See video description for full explanation.
"Meanwhile we can keep using the old "leaking" machine when manual water input valve is closed after every wash."
@@MikkoAuvinen i found out my problem. My problem started when I put (don't know the english word for it but I call it dishwasher salt) in to the container and forgot to close the lid. The next morning it was fine but then I started a second time i30. came after 30 minutes. I could not figure out how,what and why so I decided to take the machine apart. I took out the container where the salt used to be and you know what? It was empty but the slot next to it was filled with dirty left over food etc. Because I forgot to put the lid back all the salt was gone and food went inside it. So I cleaned it out and put everything back together. I run it 3 times empty and the first time with a machine cleaner. It is good for now (has been 3 days).
How can I reach the secondary tray under the machine AEG FAV50EWOP. By the front side or back side ? and how to desassemble the bottom cover ?
Man you rock! Done it fixed it own you one!
Thank You, for sharing your knwolage
Thank you very much. You are my hero!!
Very useful video, thanks for saving me £200
Thanks, it helped!
Thank you so much! 👏🏻👏🏻👏🏻👏🏻
Thank you very much!
Thanx! This helped me fix it
The front is pretty hard to get off. I'm afraid I might break something, or should I just push through?
Best solution 👍🏻
Thanks it has helped, altough I found 2 small gray tubes/cords that are not really connected to anything, what are they?
As a service tech. I would like to tell you😅
Cheers! … that worked 👍🏼
it works. thank you for the video
Hola buenas noches perdona una pregunta tengo una lavavajillas AEG sale error i11 que senifeca este error que broplima es gracias
Thank you so much!
Hey ! I want to try your solution but the bottom section (plastic part bot even the metallic with the screws) is unremovable :// any idea on how I could get my way around it ? I don’t want to force to much because I’m scared of ruining the piece ! Thanks
Hi there. Im having the same issue. What was the solution around this? Would appreciate any help im trying to save some cash and not get a tech out
Thanks it work ❤❤
IT WORKED!! 👏🏼👏🏼👏🏼
Great! Thanks a lot.
Thank you
Merci beaucoup
Hi Mikko, How did you manage to open the bottom section of the dishwasher? Thank you
Just remove those screws. They might be covered with plastic tops, remove those first to reveal the screws.
That works! Thanks!👍👌
Thankyou so much
Merci beaucoup, ça marchée
I think I love you!
Thanks a lot 😀
Maybe some vocal clarification might help as well. For example is it the back plate (grey plastic cover on our machine) down the bottom that you removed to access that water?
Yes it's the front bottom cover. Usually no need to move the machine if your AEG/Electrolux model has roughly the same structure.
Thank youuuuu !!!!!!
תודה!
Wow! Thanks a lot! My first Super Thanks ever! 🤩
lol there is usually a reason as to why there is water in the bottom pan. simply clearing it away is not problem solving. you need to find the reason as to why the water was leaking in the first place.
You're right. This is explained in video description and the video is titled as "workaround fix".
Video also shows the malfunctioning inlet valve that leaked in water in our case.
Thnxxx!!! 😅
But I don’t understand why the pump continues to work? Is it train to drain it?
Inner tray is flooded with water. Running drain pump prevents incoming water flooding to your apartment.
Yes and the same error comes after 1 wash.
Thanks
well it's a temporary fix, after 1-2 washes it flooded again for me
Oh come on guys!!! This "fix" is for one day. We could you a real tutorial how to FIX it PERMANATELY. I don't need an every night ritual with a disheasher 😂
lifesaver
But why is water in the Bottom?
If the water level inside the machine raises above the certain level (for any reason), it will deliberately flood into secondary tray where the flood sensor is located. Read the video description for details (in our case water input valve was leaking).
@@MikkoAuvinen but wich Reason? Defect Sensor? Wrong dose of Powder? Thats will be interesting.
KIITOS!!!
Fuck… I don’t have access to that part.. it’s integrated with wood…
Where does the water comes from 🤣
Water inlet valve was leaking when it was closed. See video description for full explanation.
Thank you so much!