What should I do when my dishwasher shows the water tap error light?
HTML-код
- Опубликовано: 30 сен 2024
- This video demonstrates common checks you can do if the water tap error light appears on your dishwasher.
Visit our online store to find out more about our tested and approved Cleaning and Care products. www.bosch-home....
The most common cause to a water tap E22 error is a clogged / dirty pump filter / trap which should be checked first rather than the last step in this video! Why go through all the work of disconnecting hoses and moving the dishwasher when you can try cleaning the trap and filter first?
Followed all these instructions and the dishwasher is still refusing to work. What’s next?
I used to think Bosch Dishwashers were the bomb - after my 3rd one I realized they are finicky crap - sorry never again
Couldn't find a decent guide in french and found your video. Well explained and worked fine for me. Thanks !
This was a great help I just fixed my dishwasher after a few days of it not working and me being lost on what to do about it. I have 5 kids too so I can't live without the dishwasher.
Thanks a lot for sharing this was a life saver 😊
We're really glad to hear this was of assistance!
If the machine keeps draining with E15 and the power button has no effect, then whack the underside with a piece of wood, this will free up the float valve that is stuck. Then put some dishwasher descaler in and run it without dishes. It should last another five years.
We cleaned the small water filter twice, second time it worked. It would be good to know more about the big filter in the inlet hose. I would also like to replace the whole inlet hose with the fat filter (softener?) element which we cannot clean.
We've done all your steps and it still hasn't stopped flashing
Same here. Did you get to the bottom of the problem?
Probably needs a new aqua stop fill hose
Many thanks, saved me loads of troubleshooting time. Drain pump was clogged, fixed it in 5 minutes.
2:37 that little black/brown rubber disc should be REMOVED? I thought it was some some of flap valve to prevent dirty water coming BACK IN to the machine (our machine here fills back in with some dirty grubby water when the machine has finished, always dirty water in the trap. Turned onto it's side, the machine finally emptied itself of ALL the water from the trap, and it was cleaned thoroughly, and now on re-installing we got the error A1.
Bosh dishwasher flashing tap
Same here. Did you get to the bottom of the problem?
I've two lights continuous blinking: water supply and rinse aid liquid. The machine is working, but the lights don't stop blinking even when the machine is turned off.
Hi, thanks for getting in touch and we're sorry to hear this. Please can you let us know the model number? - Thanks Brett
@@BoschHomeUKandIreland Yes of course: SMS25AI05E/51
Thank you for confirming.
We would advise topping the appliance up with Rinse Aid, and running a cleaning cycle, should you still experience the issue after this, please do let us know, alternatively, you can book a repair online here: www.bosch-home.co.uk/customer-service/book-a-repair-online
Thank you - Emma
you need to show how the error looks like on machine
Hi, The tap icon on the display lights up. Thanks - Craig
My stupid employer thought it was broken and paid so much money to repair again same thing happened now they kept the machine away and killing my enagy
Worked for me with a siemens dishwasher.
Thank you for posting it.... it was actually a very clear video, which did help me. I could open up inlet and remove lot of dirt clogged in inlet pipe right before the filter. We actually need such trouble shooting when there is no need to call customer care. Thank fully I didnot even Chk outlet and then drain pump clogging
Dish washer pump
Yeah
Thanks a lot from Germany. Just made my dishwasher work again :)
They same German voice on Airbus videos🤣🤣🤣🤣🤣
Just found your video.... after completing my own, which is precisely as you described. A good and clearly explained video. Mine had a flashing "Check water"light. I went one step further and removed the washer from its under bench position. While I removed the side panel, I need not have done so. I lay the washer over to the right, to drain any water left internally. I then reinstalled and it worked!!!
Very clear video. Thank you. All sorted.