Lets design sheet metal part in Creo Parametric The basic sheet metal design • Sheet metal tutorials ... Unbend Sheet metal • Sheet metal Unbend in ...
The part which is having two directional bend cannot be flatten creo parametric accept flange. Swept flange generate two dimensional bend which is difficult to flatten. In this case we consider top sketch dimension for flat pattern dimension. Thankyou.
I had this problem, for anyone wondering, I switched from solid to surface on "type" inside swept bend ribbon. After that I was able to make the spoon surface, then you just gotta pick "Thicken" on editing to make it a solid
I think your sketch get disturb once you modify the dimension. So to solve this problem there is is a specific option available inside the sketch. Just look at on the top of the toolbar. You will find one option called modify. First you add this dimension which is 170. You may get a different value for this dimension. Now you go inside the modify and select this dimension. Below you have two options regenerate and scale. Uncheck regenerate and select scale. Enter the correct value of the dimension which is 170. Now you say ok and will get the dimension with correct value.
The way you demonstrate is amazing...
Thank you.
Glad you think so!
Indeed the best tutorial for spoon Modelling. Thank you Sir
Thanks for the comment.
Very great demonstration. Congrats on your job.
Wow sir your procedure was easy and best thank you sir
❤
Thank you for all of these great video. I would be great if you can do a video on the Mandalorian Helmet.
Elinize ve emeğinize sağlık, çok güzel anlatım.
NYC video👌👌
Is this part able to be flattened? I have tried different ways and am not able to do it. Thanks for the video.
The part which is having two directional bend cannot be flatten creo parametric accept flange. Swept flange generate two dimensional bend which is difficult to flatten. In this case we consider top sketch dimension for flat pattern dimension. Thankyou.
Thanks a lot
You are doing great.
I have some sheet metal problems.
Do video on unbend igs. File part have hole flanging and ribs, louvers
I will post a video soon.
Nice video
Hi sir, I am unable to press insert at 10:00 and im missing the center arrow, how do i fix this?
Go for the select section first
I had this problem, for anyone wondering, I switched from solid to surface on "type" inside swept bend ribbon. After that I was able to make the spoon surface, then you just gotta pick "Thicken" on editing to make it a solid
wow
is an obligation to select "sheet metal" or can we work in "solid"?
Yes, from Creo 7.0 sheet metal and solid both tools can be accessed at a time while working.
Sir make more creo tutorials
What is the price this Creo software. Could you please give me idea anyone bro
How to switch off the datum.. anyone know...pls reply mee
how do you keep the drawing window overlapping with the creo window?
This is done by video editor.
@@CADxTraining can we do this in creo..?
No idea
Sir how to switch of the datum.
For datum on off, you have a icon on the top of working area.
Helloo sir, which colour did you use in appearance ??
It is already shown in the video.
Sir, I can't find that material in the appearance if possible plz can you give me its name?...
It's ptc-std-crome. I use creo6.
Got It Thanx alot🤩😊
How to pick that dimensions 170
What is the problem?
At 1.49 how did you reduce the overall length to 170 .( from here to here 170)
Like how to do that please reply
I think your sketch get disturb once you modify the dimension. So to solve this problem there is is a specific option available inside the sketch. Just look at on the top of the toolbar. You will find one option called modify. First you add this dimension which is 170. You may get a different value for this dimension. Now you go inside the modify and select this dimension. Below you have two options regenerate and scale. Uncheck regenerate and select scale. Enter the correct value of the dimension which is 170. Now you say ok and will get the dimension with correct value.
nice video but ican spoon
nice video but i can bend a spoon
Why to bend
How to switch off the datum
Any one can help me
In the top of the working area in creo u have set of I icons. You will get datum on off icon within that.
Lanati