Seriously appreciate your hardwork sir. Awsm tutorial. I used to serch all the online videos of creo out off those yours videos really special and very useful if I am not wrong. Please focus on surfacing as well parallely along with sheet metel. Thank you.
Thanks for yet another wonderful tutorial sir. I am not able to create the Group flange using the Shift Button Option. I get Re-generation failed when all edges are chosen. With only one single edge, it is created. Would be grateful if you help sort out, this please. Thanks in advance.
[12/09, 7:03 pm] Sanjeev Kumar Gupta🤝: 60degree bend [12/09, 7:18 pm] Sanjeev Kumar Gupta🤝: Flange dimension from out side 30 mm both and corner radius out R34 mm and material thk. 2 mm [12/09, 7:20 pm] Sanjeev Kumar Gupta🤝: Corner radius slot 5 mm equally
i can't flat pattern the rounded rectangle I am using creo 8.0 student version (Redefine flange wall section or trajectory) this is the note I am receiving from the trouble shooter.
am created the planer and the second step creates a flange. so creo cants the view for the flange. Pls send the mail id and I will send the image for your reference
@@CADxTraining okay sir thq I got a job offer in Creo and am learning so many things in sheet metal Technics from your video sir your video is very useful for all beginners post more video in up coming days sir Thank you 😊❤️
U r publicing Videos r very usefull to me Thank u very much Sir. Can u send me ur email Id to me for I have a 2 d drawing... So many times I tried to Convert 3d. I can't So help me sir.... thank u sir
All your videos are so help full..thank you for your video
Great content on sheet metal 👌
Your videos are really useful
Super super.... Please upload this kind of video,... It is useful for beginners like me....
Thank you very much 🙏
Useful videos thanq
Thank you Sir🙏
Seriously appreciate your hardwork sir. Awsm tutorial. I used to serch all the online videos of creo out off those yours videos really special and very useful if I am not wrong. Please focus on surfacing as well parallely along with sheet metel. Thank you.
Thanks Harshan for your comment. I am going to post a set of valuable videos on style surfacing soon.
@@CADxTraining tq thank u so much..
Thanks for yet another wonderful tutorial sir.
I am not able to create the Group flange using the Shift Button Option. I get Re-generation failed when all edges are chosen. With only one single edge, it is created.
Would be grateful if you help sort out, this please.
Thanks in advance.
Mail your part to me at sandesh4satyen
I will see
[12/09, 7:03 pm] Sanjeev Kumar Gupta🤝: 60degree bend
[12/09, 7:18 pm] Sanjeev Kumar Gupta🤝: Flange dimension from out side 30 mm both and corner radius out R34 mm and material thk. 2 mm
[12/09, 7:20 pm] Sanjeev Kumar Gupta🤝: Corner radius slot 5 mm equally
Sir,could you tell me all commands on creo 5 and you explain all commands with examples....and your the best in creo tutorial 😃😃😃
Go through the playlist. It covers all the commands.
Hello sir , i can't create multiple flange using flange option >sketch >sketch
After sketch , it gets error and showing notification msg
For creating multi flange as said in this video, I'm getting error when I specify first wall thickness less than 0.06mm. Please help.
Take the higher value
i can't flat pattern the rounded rectangle I am using creo 8.0 student version (Redefine flange wall section or trajectory) this is the note I am receiving from the trouble shooter.
Increase the file accuracy and it will be solved I believe.
Hello, I am getting a gap in between the flanges could u help me with that?
Here is the answer. Watch it and correct it.
ruclips.net/video/VTG6Cr6Koz4/видео.html
I can't do flange for multiple edges at same time.if I select the curve using shift after that flange can't create.i am using creo 6.0
Go with flange option. I think you are using flat.
@@CADxTraining no..I am trying on flange option..I think , I want to configure sheet metal options
am created the planer and the second step creates a flange. so creo cants the view for the flange. Pls send the mail id and I will send the image for your reference
sandesh4satyen@gmail.com
How to do the all shift key please tell me sir
I didn't get your question.
@@CADxTraining sir you saying in this video select this edge and all shift key how to do that I can't understand sir
Press and hold the shift key from your keyboard and move the cursor to all the edge.
@@CADxTraining okay sir thq I got a job offer in Creo and am learning so many things in sheet metal Technics from your video sir your video is very useful for all beginners post more video in up coming days sir
Thank you 😊❤️
problem with step at 4:35 to 4:42
Use flange to get the result. Don't go for flat.
U r publicing Videos r very usefull to me Thank u very much Sir. Can u send me ur email Id to me for I have a 2 d drawing... So many times I tried to Convert 3d. I can't So help me sir.... thank u sir
Mail me at sandesh4satyen@gmail.com
It's a casting component. Do you have any other details. The drawing is not clear.