Sheet metal tutorial | Electrical wire crimp connector 2 in Creo Parametric

Let's design Electrical wire terminals crimp connector using the advance command in Creo Parametric.
Electrical wire terminals crimp connector
• Sheet metal tutorial |...
Cable wire terminal
• Sheet metal tutorial |...

[@ao3988]

Thanks a lot for your terminal tutorials, they are especially useful for me. I would appreciate more tutorials of this kind

[@goodtime01]

What a trick to unbend. I have never seen such a useful technique. Thanks for uploading.

[@loboslobos14]

Hi sir, you are very talented. Thank you for share the wisdom.

[@luckyvishwakarma5366]

Superbbbbb sir .....share more videos

[@swapnil8854]

U r great sir. Love u

[@stevensond.savanth2597]

Thank you very much sir kindly add some more videos of cable wire terminal

[@CADxTraining]

Watch this. You will get some ideas.
ruclips.net/video/bNWppHaYzEo/видео.html
And
ruclips.net/video/tmggXWm6Sk4/видео.html

[@CADCLASS]

Thanks for your great work

[@thanhtran-zd1fd]

Thanks a lot, sir!

[@HashimRaza7]

What a commendable job, Sir!
If I'm not asking too much, will you please upload drawings of every part in this assembly?
Thanks in advance. 👍

[@CADxTraining]

You can take a snapshot for the drawing from the video. Play the video in 1080p and take a snap shot.

[@HashimRaza7]

@@CADxTraining Thanks

[@rakeshdwarapalak5639]

Hello sir great work. please make electrical housing assembly please

[@HaiTien]

Great!!!

[@AO-mm9eq]

Thaks a lot!!

[@user-xd5kd3wx6z]

Cool

[@NIGHTMARE-pf4ck]

sir you selected the sheetmetal at first, but there is no sheetmetal header in the header section

[@vinayakkari2109]

Hi Satyendra,
I would like know the shortcut which you use and in which Template you create the models mm-asme or inch-asme.
Thanks🙂

[@CADxTraining]

I have used inch-asme.
This is for shortcut.
ruclips.net/video/sTL1-NPnAYs/видео.html

[@jimmatrix7244]

What metal is used to make the connector and plastic is used in the end?

[@CADxTraining]

The most common material used as metal is copper alloy and insulating material as nylon.

[@jimmatrix7244]

@@CADxTraining Thank you. Excellent skill and knowledge.

[@naveena3262]

Sir why it is not possible to unbend as u did in the unbend 1st video..(by selecting deformation options in unbend feature)
Please tell when we have to use split option to unbend the Sheet when it is not possible in common unbend option..🙏🙏🙏🙏

[@CADxTraining]

These are the two different techniques in creo parametric for sheet metal design. Now in this video I have used split area because the part must have continuous split surface to use deformation technique as the 1st part is. This part doesn't have continuous split line end to end.

[@naveena3262]

Sorry sir I am still confused, I don't know which is continuous split surface pls help me out.

[@CADxTraining]

You see the flat pattern of both the part. You will see a continuous curve starting from top to bottom in first part but that curve is missing in second part.

[@naveena3262]

Sir, could u please add a short explainations of this doubt in the upcoming videos 🙏.
And also please tell, in what way the surface should be split(in this video u drawn a line horizontally) to achieve unbend and y it isnot possible to achieve unbend when we draw vertically?

[@CADxTraining]

We draw the split line, normal to flatten portion.

[@HassanAli-of9nv]

Sir, how you insert side drawing image in creo ?

[@CADxTraining]

That is done by video editor

[@rajav519]

Dear sir I am try to unbend revolve cylinder base how to solve

[@CADxTraining]

ruclips.net/video/z9cop2EiU4I/видео.html
This will be helpful.

[@naveenselvam4823]

Hi Sir, Need your support to do the same model in NX sheet metal

[@CADxTraining]

Sorry Naveen, I am not familiar with NX.

[@zac6907]

Brother you do know a lot of things in sheet metal modelling undoubtedly but your drawing making is just below par....your views aren't understandable & dimensions are missing