This is great. There is an alternative cause for an ice maker freezing over. I had the problem for more than a year and it was driving me crazy. I cleaned the fill tube, and it didn't make a difference. I noticed that the water was coming out of the tube really fast, so I tried to use a piece of plastic to keep the water from spilling over the funnel that takes it to the tray, but that didn't work either. I was about to spend more than $300 on a new ice maker that I was going to install myself when I wondered whether the water filters I had bought online might have something to do with the problem. My fridge is a Kenmore Pro and the Kenmore water filters are more expensive than generics you can buy online. I had tried to save some money buy going with the generics. This time, I bought a Kenmore filter and installed it. Doing that fixed the problem immediately. It seems that the flow of the water through the filter is really important. If it's too fast, the water can gush out of the fill tube too quickly and leak behind the ice maker. Hope this helps someone!
This was the solution I have been looking for. The fill tube was clogged, so when it filled the water, it was blowing all over the place. Thanks for this video - it was super helpful
Had water leaking from the ice dispenser and solid ice chunks. Thought the trapper door was hanging open, melting the ice. NOPE!! This video perfectly shows how to test the ice maker (thanks!!) and the water fill spout needing to be cleaned of mineral deposits (bingo!!) or the water splashes over the clear diverter funnel. Cleaned and done. Super easy. Keep ‘em coming… I’m subscribed now!!
Why can't ALL instructive videos be Just Like This Video. Step By Step, Quick, Easy To Follow, Instructor uses Laymen's Terms, Professional, Thourough and Complete! Excellent Video.
Hi. Great video. Gave me the incentive to look as to why I had water in my ice bucket, then the giant frozen blob. My fill tube was encrusted like you showed. The thing is, my wife is insanely strict on replacing the water filter. We have silicates in our water here in northern New Mexico, not calcium, nor lime, nor rust. Silicates are nasty to try and clean or treat or filter. Anyway, cleaning the fill tube crustiness stopped 80% of the water dripping from the tray mold to the bucket. I was still getting enough water to drip down into the ice. I ran a couple of manual cycles and watched where the force of the water from the tube, down, and around the clear fill funnel into the tray was enough to spray all the away across to the other side of the tray wall, out the gap between the wall and the tray mode, and drip into the bucket. We have too high water pressure here at the house which doesn't help. It messes with lots of other stuff too. But, the county won't work on the pressure regulator on our block. What I did was disassemble the clear funnel, and the cold air duct. I pulled the clear funnel and ground some of the bottom of the clear funnel where the water exits so that more would go straight down into the tray and not to the tray wall. Then, I bent a thin piece of aluminum stock and slid it over the clear funnel outlet, leaving a gap. This flattens the water fill and keeps 99% of the water in the tray mold now. I get One, tiny little drop that comes out of the tray mold wall and into the ice bucket. I can live with that. Hey, thanks again for the great video. My ice maker is now back to almost normal. In my opinion, this is a design flaw on how water can spray out over the side of the tray and into the bucket. My fridge is 4 years old. Maybe it's just wearing out. Stu, Los Alamos, NM.
Seriously thank you!! I've been so frustrated until I watched your video! Your assessment was correct, calcium build up on water nozzle. I cleaned it up with vinegar and we are all good!!
I was so frustrated with my refrigerator leaking water and freezing up that I was about to buy a new one. I replaced almost all the ice maker components and still, it leaked. This simple task fixed it up good as new! Having hard water, I should have known it would be something like this. Thank you!!!!!
This was just what I needed! I was wondering why water was always leaking when the ice tray was filling up. Followed your steps and all is good! Thanks so much for posting this!
Thanks! This looks like it could be exactly our problem. I just followed the steps on ours and am waiting to see if that takes care of it. I can't believe how easy it was to do!
OMG, thank you so much. This video had the fix for my refrigerator that had a huge ice block where the water is supposed to go into the ice tray. Now I have ice cubes again, and my fridge isn't leaking anymore water.
Thanks for your video. Did the job!! I didn’t bother unplugging the fridge or pulling the ice maker wire harness. Just cleaned out the calcium from the nozzle and we’re good to go.
This video was super helpful. Even though my model wasn't quite the same so it took me a little while to figure out which screws to remove to get access to the fill tube, I was shocked to find that cleaning the end of it with a toothbrush actually did stop the water spilling out and freezing inside and outside of my ice maker bucket. Eliminated a big pain dealing with this, thanks!
Bro, you're a genius. Fixed my issue right away. Went ahead and subbed. No more water splashing over and freezing up my ice trap door. Perfect. Thanks. ❤❤❤
Awesome finally found someone that posts a very clear solution to my problem! I just went and cleaned it up. So crossing my fingers that’s all it is. Could also be that I have the valve for the water flow a little high. It fills faster than your video. Thanks!
Thank you so much!! We couldn’t figure out what was going on with our ice maker and found this video. Your step-by-step instructions made it easy to do and it fixed our problem!
Thanks! Super helpful. Discovered my tray was cracked and water was dripping into the ice. Of course LG do not sell the tray separately from a new unit 😢
This was a great video and very helpful. Mine had a chunk of ice in a tube that led to the ice trays, which made the water splash over it and some would get in the ice trays and the rest. would just washed down the door. With your helpful video I figured it out. Have a great day and keep doing videos.
john again i dropped the craft ice maker let it hang off the wires got a turkey baster filled it boiling hot water in the ball of the baster reconnected it and squeezed the boiling hot water into to the hole showing, did this a few times never took off the door no need to crawled under the rails made it happen ,success! wanted to pass it on
So far so good, I just did this on my fridge and it’s made a couple batches of ice. I found a couple dribbles of water coming from the ice chug but I don’t see any inside the door or around the fill area like I did before. I’m guessing that was just some residual ice melting, not new stuff. I believe what happened was the water dispenser was spraying a bit because of calcium build up and that spray was dripping down the door, and causing ice build-up in the tray, which then didn’t dump correctly, leading to overflowing during the next cycle. Hopefully this fixes everything. New ice makers aren’t cheap, despite being very cheaply made.
Thanks! Now what do i call the cracked and broken water bladder behind the bottom of the door? How do i disconnect it? Im a 62 yo sgl woman, and you are fantastic at fixing and explaining, Guru!
Hello thank you for reaching out and I appreciate the super thanks. That one has to be replaced as an entire assembly if it's cracked I am out of Southern California so if you're out here I can come out and help you do the repair if not I would probably reach out to a local technician because those are a little bit tricky to install
I have a Kenmore built by LG that’s leaking water inside the ice maker and running down the right side and freezing. I gets built up bad enough under the ice bucket that it freezing it in there to where I can’t get it out until a bust away the ice.
Ive got a similar LG frig. The icemaker is building up water beneath the holder tray and freezing up, and behind the backing where the dispenser motor is and freezing it up so it wont dispense. Also the water dispenser on the front isnt working.
Thanks alot video was perfect. I was just wondering if any one has had my problem. Ice cubes are made, but the tray won't dump the ice unless i push the reset button. Other than dumping on its own without reset everything works fine. Any help would be appreciated.
Thanks! I have same lg door ice maker and same problem. I also have a second ice maker in the bottom freezer door, on the top. It is filling the ice bin making solid blocks of ice in the bin. Would this be the same fix? It's going to be fun working upside down🙄
@nateh.4414 That could be the ice-maker itself. This issue doesn't really happen to the ones that are in the freezer drawer because the fill tube is a lot wider. I would have to look at it. I'm in Southern California. Where are you located?
@@theapplianceguru oh I am in Texas. It is strange as sometimes it makes ice normally and then others it makes a mess of it and becoming more frequent. Thanks for your insight.
@@nateh.4414 oh okay yeah that sounds like the ice maker sometimes is cycling and sometimes it is not pretty common issue with those ice makers I would try replacing the ice maker before I do anything else best of luck!
This was helpful, but I couldn't figure out how to unplug the power connector on the back of the ice maker. My connector is a different color (white); I couldn't see any retaining clips that had to be compressed to pull it out.
New LG ice maker has been replaced to match model # from Lowes, new water intake valve on back has been replaced, and a new water filter installed. Water is dispensing, ice is freezing freezing but ice is not dumping. This is the 3rd ice maker in 5 years
New to this. I'd happily add a donation (where exactly?) for your advice. My LG's ice maker water dispenser in the upper right seems to have More serious issues than calcium. I took a couple pictures. Can I upload somehow. ?
im john ,i have a lg craft ice make not get any water to the tray reset button works great does the cycle but no water, door ice maker still making ice and water on the door still filling glasses of water
Is there a way to replace the entire tube that fills the ice maker? Mine is "corroded" from hard water and I have to do this about once a month, thanks for the great video btw!!
Water dispenser is fine but no ice making. I couldn’t hear water fills in. Sometimes it does and makes 8 cubes. Do I need to change whole ice maker kit?
Hi THank you for your effort. I do have questions however. 1. What is the "fill hose"you refer to ? Is it the little plastic/rubber 1/16 " diameter hose that is attached to the mold? Or do you mean the spigot from which the water is added to the mold? 2. My mold kind of bends when it is retracted after I energize it. In your video I noticed that yours also sightly bends as it retracts? I noted a slight crack in one of the cubes in my mold. 3. My electronics connection is different than yours. I am reluctant to try to pull it free as you do in your video. I consider myself quite "handy"but very cautious. Looking forward to hearing from you.
Hey good question when I say fill hose I refer to the aluminum tubing that comes out of the door mold. The Ice Cube mold that flexes should flex and twist and is not always level horizontally it could be tilted backwards or forwards that is a normal position for that Ice Cube mold. If there is a crack in one of the cube casings and you pour a little bit of water in there and water comes out of the bottom and the other side it seems you have found the problem more than likely the reason why you cannot pull it free as easily is that it is frozen in between the ice maker assembly and the door mold
I noticed icing every time I open the ice maker door, I called LG and was told to replace the ice maker box inside gasket. I did. and it cost me around 98 dollars. The issue was not resolved. still see icing inside the ice maker door and water dripping on the side of the door.
I have white plastic shavings when using the crush ice option, is it the blades probably misaligned ? No its note calcium very fine sometimes big chunk of plastic braid. Could it be the ice bucket or could this be the the ice cube tray maybe its flaking apart when the ice gets dropped into the bin ? I cant see any marks or rough surfaces on the bin where blades are for crushing ice, but can the ice bin actually be falling apart and dropping its plastic shavings down below when ice is dropped ?
@@theapplianceguru Can you remove and decalcify the bottom one as well? It also seems like the ice is frozen in the bottom ice tray so water just runs into the ice bucket, but I get no ice.
Like the video but my issue is water splashing over the front outer side when filling. Took it apart as shown but found minor scaling. appear too much pressure??? Any comments?
@jamesatthewatercooler5463 I don't know any technicians in that area. But if you have a preferred technician have them check the micro switches behind the water paddle more than likely water and calcium have corroded them shut and whenever you close the door it engages that switch to dispense water Google "micro switch" that would be what I lean towards. If you lock the dispenser and it stops doing it I would say I am 90% sure that's the problem
Ive had my LG fridge for 3 years and never changed the temps. Just last week it stopped making ice, turns out the line was frozen from the valve in the door to the ice maker. Thawed it out worked great for 1 tray of ice so we did it again and raised the temps to 37 and 0 and it froze again.... what could be happening to make this orange line freeze so fast?
@theapplianceguru I think i need to find a new tech, hes the one that said to raise the temps and everything was fine. I was pretty sure its something else causing the problem. Thanks for the reply!
Took my ice maker out today to clean out old ice from a fridge that’s just like this one. Hired someone to come and do a $1500 repair job on it a month ago , we don’t use the ice hardly ever. But tonight after dumping the ice and cleaning the calcium dust out of it, it put the ice bucket back in and my water dispenser won’t stop pouring water out. I’ve tried turning the ice maker off and the water is still pouring out. HELP!!!! Any advice and THANK YOU
Thanks for the video. I have an LG that leaks water from the ice maker even after the ice maker is full of water. Would you replace the water valve in the back or the ice maker in the door? Thanks
Have you run across the following issue? LG ice maker works fine for 8-10 hours then stops filling. I shut it off for 1-1/2 hrs., turn it on and recycle and it starts working again. Then the issue repeats over and over. What the heck is that problem?
Great video. Do you have a solution to a similar water leak/ ice cubes frozen stuck into tray for a model: GSX961NSAZ? and where is the test button on that model?
I have this same ice maker. How can i adjust the amount of water that goes into the tray each cycle? Also, a test button is mentioned. Where is it? Thanks
My LG refrigerator is the same as the one in this video and it seems to be leaking from the ice dispenser door on the outside of the refrigerator, will this repair correct that condition?
Hi, I am having issue with the ice maker. Water is coming but not the ice. I checked inside the ice maker, as per my observation water is not getting into the icemaker tray but when I take option of water on the front door I am getting water. How to fix this issue, how do i get the water into the ice maker tray?
Hello sir , when I turn off and on , the flipper bar makes a loud tick and almost like when you can't torque anyone. Any ideas what's wrong ? It's a new fridge.
HELP!!! Hi Mr Appliance Guru, I have a side by side LG and it's not a year old. It looks like it is leaking from behind the dispenser, the water is coming out from the push panel where you place the cup to get the ice/water. And I have taken it apart, checked the lines and don't see moisture or water anywhere. Any suggestions or ideas?
I had the serviceman came out so many times to service my ice maker still not working they put two new ice makers in and it's still not working could you tell me what I might need to do
Can I just clean out the water spout and calcium and install the existing ice maker, to see if it solves the problem? I don’t want to get a new ice maker if it’s not needed.
I used a hairdryer and hot water from tea kettle. Now, today I need to see if I can find the calcium build up? And I was bragging that I fixed. Only half fixed. Getting the ice defrost - done.
I wish you had demonstrated the things you actually talked about! Video is mostly about how to replace the ice maker, not visual demor on trouble shooting the cause of the trouble.
Every single other person on this comment section understood the repair. I'm not sure what you're confused about. Calcium builds up on the water fill tube, causing it to splash out of the fill tube.
What about if it's not leaking down in the back and is instead running out the front side of the ice maker and covering the entire front of the ice bucket with water as well as filling the rubber seals around the door which then all freezes solid? How do you solve that problem? IDK how to give super thanks sorry or I would.
This is great. There is an alternative cause for an ice maker freezing over. I had the problem for more than a year and it was driving me crazy. I cleaned the fill tube, and it didn't make a difference. I noticed that the water was coming out of the tube really fast, so I tried to use a piece of plastic to keep the water from spilling over the funnel that takes it to the tray, but that didn't work either. I was about to spend more than $300 on a new ice maker that I was going to install myself when I wondered whether the water filters I had bought online might have something to do with the problem. My fridge is a Kenmore Pro and the Kenmore water filters are more expensive than generics you can buy online. I had tried to save some money buy going with the generics. This time, I bought a Kenmore filter and installed it. Doing that fixed the problem immediately. It seems that the flow of the water through the filter is really important. If it's too fast, the water can gush out of the fill tube too quickly and leak behind the ice maker. Hope this helps someone!
This was the solution I have been looking for. The fill tube was clogged, so when it filled the water, it was blowing all over the place. Thanks for this video - it was super helpful
@@PaulLanspa than you for the super thanks very much appreciated
Had water leaking from the ice dispenser and solid ice chunks. Thought the trapper door was hanging open, melting the ice. NOPE!! This video perfectly shows how to test the ice maker (thanks!!) and the water fill spout needing to be cleaned of mineral deposits (bingo!!) or the water splashes over the clear diverter funnel. Cleaned and done. Super easy. Keep ‘em coming… I’m subscribed now!!
Thank you for the subscription! And of course that's I see more common repairs that will make more videos
Why can't ALL instructive videos be Just Like This Video. Step By Step, Quick, Easy To Follow, Instructor uses Laymen's Terms, Professional, Thourough and Complete! Excellent Video.
Hey Johnny thank you so much for the positive feedback I really appreciate your support
Hi. Great video. Gave me the incentive to look as to why I had water in my ice bucket, then the giant frozen blob. My fill tube was encrusted like you showed. The thing is, my wife is insanely strict on replacing the water filter. We have silicates in our water here in northern New Mexico, not calcium, nor lime, nor rust. Silicates are nasty to try and clean or treat or filter. Anyway, cleaning the fill tube crustiness stopped 80% of the water dripping from the tray mold to the bucket. I was still getting enough water to drip down into the ice. I ran a couple of manual cycles and watched where the force of the water from the tube, down, and around the clear fill funnel into the tray was enough to spray all the away across to the other side of the tray wall, out the gap between the wall and the tray mode, and drip into the bucket. We have too high water pressure here at the house which doesn't help. It messes with lots of other stuff too. But, the county won't work on the pressure regulator on our block. What I did was disassemble the clear funnel, and the cold air duct. I pulled the clear funnel and ground some of the bottom of the clear funnel where the water exits so that more would go straight down into the tray and not to the tray wall. Then, I bent a thin piece of aluminum stock and slid it over the clear funnel outlet, leaving a gap. This flattens the water fill and keeps 99% of the water in the tray mold now. I get One, tiny little drop that comes out of the tray mold wall and into the ice bucket. I can live with that. Hey, thanks again for the great video. My ice maker is now back to almost normal. In my opinion, this is a design flaw on how water can spray out over the side of the tray and into the bucket. My fridge is 4 years old. Maybe it's just wearing out. Stu, Los Alamos, NM.
Worked perfectly to fix my issue… Thank you so very much!! Quick 10 minute fix instead of paying for a technician.
Seriously thank you!! I've been so frustrated until I watched your video! Your assessment was correct, calcium build up on water nozzle. I cleaned it up with vinegar and we are all good!!
Exactly what was wrong with my LG fridge! Thank you Appliance Guru and RUclips!
I was so frustrated with my refrigerator leaking water and freezing up that I was about to buy a new one. I replaced almost all the ice maker components and still, it leaked. This simple task fixed it up good as new! Having hard water, I should have known it would be something like this.
Thank you!!!!!
Nice!!! Glad I could help
Thanks! Your instructions were great. I cleared out the full pipe, and no more water spray freezing the ice bucket into place!
Awesome I'm really glad I could help thank you so much for the super thanks!
This was just what I needed! I was wondering why water was always leaking when the ice tray was filling up. Followed your steps and all is good! Thanks so much for posting this!
Thanks! This looks like it could be exactly our problem. I just followed the steps on ours and am waiting to see if that takes care of it. I can't believe how easy it was to do!
Great to hear. I'm glad I could help.
OMG, thank you so much. This video had the fix for my refrigerator that had a huge ice block where the water is supposed to go into the ice tray. Now I have ice cubes again, and my fridge isn't leaking anymore water.
Thanks for your video. Did the job!!
I didn’t bother unplugging the fridge or pulling the ice maker wire harness. Just cleaned out the calcium from the nozzle and we’re good to go.
This video was super helpful. Even though my model wasn't quite the same so it took me a little while to figure out which screws to remove to get access to the fill tube, I was shocked to find that cleaning the end of it with a toothbrush actually did stop the water spilling out and freezing inside and outside of my ice maker bucket. Eliminated a big pain dealing with this, thanks!
Great to hear Tom 👍🏻
Great video. It helped me find the test button which is all that I needed
Bro, you're a genius. Fixed my issue right away. Went ahead and subbed. No more water splashing over and freezing up my ice trap door. Perfect. Thanks. ❤❤❤
Hey, glad i could help. Thank you for the sub, and thanks for the comment. I appreciate it!
@@theapplianceguru ❤️❤️❤️
Awesome finally found someone that posts a very clear solution to my problem! I just went and cleaned it up. So crossing my fingers that’s all it is. Could also be that I have the valve for the water flow a little high. It fills faster than your video. Thanks!
@@WalterThompson-z6q yes see if you can turn the valve down a tad bit
@@theapplianceguru I also replaced the generic filter and ordered a LG one in case that is causing this issue. So anyway no leaks at all now. 👍🏼
Thank you so much!! We couldn’t figure out what was going on with our ice maker and found this video. Your step-by-step instructions made it easy to do and it fixed our problem!
Thanks! Super helpful. Discovered my tray was cracked and water was dripping into the ice. Of course LG do not sell the tray separately from a new unit 😢
Thank you for the contribution! I appreciate it so much. I'm glad I could help you
This was a great video and very helpful. Mine had a chunk of ice in a tube that led to the ice trays, which made the water splash over it and some would get in the ice trays and the rest. would just washed down the door. With your helpful video I figured it out. Have a great day and keep doing videos.
Thank you. Glad I could help.
Thank you for this video and your explanation. I was able to fix my LG and save me a lot of money. Awesome.
john again i dropped the craft ice maker let it hang off the wires got a turkey baster filled it boiling hot water in the ball of the baster reconnected it and squeezed the boiling hot water into to the hole showing, did this a few times never took off the door no need to crawled under the rails made it happen ,success! wanted to pass it on
Not sure I've seen anyone point this out. They all say check water pressure. Makes perfect sense. Thanks!!!!
Correct almost always its calcium build-up, Mahalo!
Thank you so much for this video. Helped me fix my ice maker in 10 minutes!
Thank you any contributions to the super thanks are greatly appreciated 🙏🏼
Thank you for making this video. It’s a major help for us DIY. There are times when I know to throw in the towel to call that pro.
Great info. I wish the camera work was a little less jumpy but, hey, great info regardless.
So far so good, I just did this on my fridge and it’s made a couple batches of ice. I found a couple dribbles of water coming from the ice chug but I don’t see any inside the door or around the fill area like I did before. I’m guessing that was just some residual ice melting, not new stuff. I believe what happened was the water dispenser was spraying a bit because of calcium build up and that spray was dripping down the door, and causing ice build-up in the tray, which then didn’t dump correctly, leading to overflowing during the next cycle. Hopefully this fixes everything. New ice makers aren’t cheap, despite being very cheaply made.
Thanks man really helped me out fixed ice maker for me without a service call
I'm glad I could help. Any contributions to the super thanks are greatly appreciated 🙏🏼
thank you SO much for this. Very helpful. Solved the problem.
This video helped, I had the exact same issue after 3 years of use
Thanks! Now what do i call the cracked and broken water bladder behind the bottom of the door? How do i disconnect it? Im a 62 yo sgl woman, and you are fantastic at fixing and explaining, Guru!
Hello thank you for reaching out and I appreciate the super thanks. That one has to be replaced as an entire assembly if it's cracked I am out of Southern California so if you're out here I can come out and help you do the repair if not I would probably reach out to a local technician because those are a little bit tricky to install
I have a Kenmore built by LG that’s leaking water inside the ice maker and running down the right side and freezing. I gets built up bad enough under the ice bucket that it freezing it in there to where I can’t get it out until a bust away the ice.
Try a hair dryer … it worked for me.
Ive got a similar LG frig. The icemaker is building up water beneath the holder tray and freezing up, and behind the backing where the dispenser motor is and freezing it up so it wont dispense.
Also the water dispenser on the front isnt working.
One would think as complicated and expensive as it is it would work. Oh that's the reason it's NOT working.
Thanks alot video was perfect. I was just wondering if any one has had my problem. Ice cubes are made, but the tray won't dump the ice unless i push the reset button. Other than dumping on its own without reset everything works fine. Any help would be appreciated.
YEA what an easy fix, thank you!!!!
Thanks! I have same lg door ice maker and same problem. I also have a second ice maker in the bottom freezer door, on the top. It is filling the ice bin making solid blocks of ice in the bin. Would this be the same fix? It's going to be fun working upside down🙄
Hey sir that depends is it the craft ice maker? Or just the regular ice maker?
Thank you for the super thanks
@@theapplianceguru it is the regular ice maker.
@nateh.4414 That could be the ice-maker itself. This issue doesn't really happen to the ones that are in the freezer drawer because the fill tube is a lot wider. I would have to look at it. I'm in Southern California. Where are you located?
@@theapplianceguru oh I am in Texas. It is strange as sometimes it makes ice normally and then others it makes a mess of it and becoming more frequent. Thanks for your insight.
@@nateh.4414 oh okay yeah that sounds like the ice maker sometimes is cycling and sometimes it is not pretty common issue with those ice makers I would try replacing the ice maker before I do anything else best of luck!
Thanks! I tried it and it seems to be working!
Thank you for the super thanks! 🙏🏼
This was helpful, but I couldn't figure out how to unplug the power connector on the back of the ice maker. My connector is a different color (white); I couldn't see any retaining clips that had to be compressed to pull it out.
@@rexadams2222 it could be tough to unplug it but you might need what's small Flathead
New LG ice maker has been replaced to match model # from Lowes, new water intake valve on back has been replaced, and a new water filter installed. Water is dispensing, ice is freezing freezing but ice is not dumping. This is the 3rd ice maker in 5 years
I had the same issue but for the ice ball maker portion. How do you fix that portion? Thanks!
Just fixed it, thanks bro !!!
Thank I will check for deposits on fill tube👍
New to this. I'd happily add a donation (where exactly?) for your advice. My LG's ice maker water dispenser in the upper right seems to have
More serious issues than calcium. I took a couple pictures. Can I upload somehow. ?
@@kylemckinnon850 email them to me
Bigalsappliancerepairlv@gmail.com
@@theapplianceguru I have emailed a coupla pics of interest. Thank you.
im john ,i have a lg craft ice make not get any water to the tray reset button works great does the cycle but no water, door ice maker still making ice and water on the door still filling glasses of water
Is there a way to replace the entire tube that fills the ice maker? Mine is "corroded" from hard water and I have to do this about once a month, thanks for the great video btw!!
You need to replace the entire door
Water dispenser is fine but no ice making. I couldn’t hear water fills in. Sometimes it does and makes 8 cubes. Do I need to change whole ice maker kit?
Great vid! Fixed my issue!!
Thank you for the comment, Derrick. I'm glad I could help!
Hi THank you for your effort. I do have questions however. 1. What is the "fill hose"you refer to ? Is it the little plastic/rubber 1/16 " diameter hose that is attached to the mold? Or do you mean the spigot from which the water is added to the mold? 2. My mold kind of bends when it is retracted after I energize it. In your video I noticed that yours also sightly bends as it retracts? I noted a slight crack in one of the cubes in my mold. 3. My electronics connection is different than yours. I am reluctant to try to pull it free as you do in your video. I consider myself quite "handy"but very cautious. Looking forward to hearing from you.
Hey good question when I say fill hose I refer to the aluminum tubing that comes out of the door mold. The Ice Cube mold that flexes should flex and twist and is not always level horizontally it could be tilted backwards or forwards that is a normal position for that Ice Cube mold. If there is a crack in one of the cube casings and you pour a little bit of water in there and water comes out of the bottom and the other side it seems you have found the problem more than likely the reason why you cannot pull it free as easily is that it is frozen in between the ice maker assembly and the door mold
I noticed icing every time I open the ice maker door, I called LG and was told to replace the ice maker box inside gasket. I did. and it cost me around 98 dollars. The issue was not resolved. still see icing inside the ice maker door and water dripping on the side of the door.
Thanks for the information going to try this
My LG REFRIGERATOR makes ice but it does not drop it in the bin I have to do it manually
I have white plastic shavings when using the crush ice option, is it the blades probably misaligned ? No its note calcium very fine sometimes big chunk of plastic braid. Could it be the ice bucket or could this be the the ice cube tray maybe its flaking apart when the ice gets dropped into the bin ? I cant see any marks or rough surfaces on the bin where blades are for crushing ice, but can the ice bin actually be falling apart and dropping its plastic shavings down below when ice is dropped ?
How do I take it out? The tray is broken and I need to take it out to fix
I have the same lg but ice works but no water comes out of water dispenser.
Hey thanks for this video! Can you do the same thing to the ice maker in the bottom freezer?
What do you mean like a reset? Yes you can reset it
@@theapplianceguru Can you remove and decalcify the bottom one as well? It also seems like the ice is frozen in the bottom ice tray so water just runs into the ice bucket, but I get no ice.
@@kodirohne1195 that depends. If it's craft ice maker you'll probably have to replace the entire ice maker
What is that little rectangular thing hanging under the ice cube tray? It must have some purpose…
Like the video but my issue is water splashing over the front outer side when filling. Took it apart as shown but found minor scaling. appear too much pressure??? Any comments?
Same LG I have but my problem is I shut the door and water automatically comes on like someone is getting a glass of water and ideas?
@@jamesatthewatercooler5463 where are you located?
Indianapolis
@jamesatthewatercooler5463 I don't know any technicians in that area. But if you have a preferred technician have them check the micro switches behind the water paddle more than likely water and calcium have corroded them shut and whenever you close the door it engages that switch to dispense water Google "micro switch" that would be what I lean towards. If you lock the dispenser and it stops doing it I would say I am 90% sure that's the problem
Ok thank you ill give it a shot
Mine is still dripping even after doing this. No cracks anywhere either. Any more suggestions?
Are you in socal?
That was awesome, thank you!!! Can I assume this is the same issue for the craft ice machine?
Ive had my LG fridge for 3 years and never changed the temps. Just last week it stopped making ice, turns out the line was frozen from the valve in the door to the ice maker. Thawed it out worked great for 1 tray of ice so we did it again and raised the temps to 37 and 0 and it froze again.... what could be happening to make this orange line freeze so fast?
More than likely, the line heater is not operating anymore on the fill tube or the main board. You would need a tech to troubleshoot the problem.
@theapplianceguru I think i need to find a new tech, hes the one that said to raise the temps and everything was fine. I was pretty sure its something else causing the problem. Thanks for the reply!
Thanks!
Thank you for the contribution Paul. It really helps put the channel.
Took my ice maker out today to clean out old ice from a fridge that’s just like this one. Hired someone to come and do a $1500 repair job on it a month ago , we don’t use the ice hardly ever. But tonight after dumping the ice and cleaning the calcium dust out of it, it put the ice bucket back in and my water dispenser won’t stop pouring water out. I’ve tried turning the ice maker off and the water is still pouring out. HELP!!!! Any advice and THANK YOU
Great video.
Would a bad water filter cause the ice maker not to make use? Also, what would cause the ice maker to to drip water?
Thank you so much!!!
Thanks for the video. I have an LG that leaks water from the ice maker even after the ice maker is full of water. Would you replace the water valve in the back or the ice maker in the door? Thanks
Thank you very helpful
I don’t have the on/off switch on the left hand side of the ice maker! Any idea how to reset? Thanks
There is tiny hole in front of the ice maker and all you have to do is With tiny needle or clip press and hold for 3 seconds to reset:)
@@freeiran6492 Thank you!
What do you use to clean the calcium deposit? You just say to clean it, not how, and what product to use?
greeting .. have a LG ridge that the ice is frozen in the ice tray .. it started with a water leak .. nothing functioning thanks
My LG fridge not dumping ice into the ice box. What is wrong with it. I reset couple times and it is doing the same thing
Have you run across the following issue? LG ice maker works fine for 8-10 hours then stops filling. I shut it off for 1-1/2 hrs., turn it on and recycle and it starts working again. Then the issue repeats over and over. What the heck is that problem?
Great video.
Do you have a solution to a similar water leak/ ice cubes frozen stuck into tray for a model: GSX961NSAZ? and where is the test button on that model?
I have this same ice maker. How can i adjust the amount of water that goes into the tray each cycle? Also, a test button is mentioned. Where is it? Thanks
Thank you for the cideo
My LG refrigerator is the same as the one in this video and it seems to be leaking from the ice dispenser door on the outside of the refrigerator, will this repair correct that condition?
Hi, I am having issue with the ice maker. Water is coming but not the ice. I checked inside the ice maker, as per my observation water is not getting into the icemaker tray but when I take option of water on the front door I am getting water. How to fix this issue, how do i get the water into the ice maker tray?
Hello sir , when I turn off and on , the flipper bar makes a loud tick and almost like when you can't torque anyone. Any ideas what's wrong ? It's a new fridge.
Hi, mine keeps dispensing the water into the bucket before it can freeze any ideas as to why it's doing this?
We have to check it out where are you located?
One side of my tray is cracked that’s causing leak but is there a way to fix crack replacing entire thing is $500
HELP!!! Hi Mr Appliance Guru, I have a side by side LG and it's not a year old. It looks like it is leaking from behind the dispenser, the water is coming out from the push panel where you place the cup to get the ice/water. And I have taken it apart, checked the lines and don't see moisture or water anywhere. Any suggestions or ideas?
Oof, that sounds like a tough one if it's still under the manufacturer warranty. I would reach out to the manufacturer for assistance.
I had the serviceman came out so many times to service my ice maker still not working they put two new ice makers in and it's still not working could you tell me what I might need to do
Can I just clean out the water spout and calcium and install the existing ice maker, to see if it solves the problem? I don’t want to get a new ice maker if it’s not needed.
I did not replace with a new one and mine is working
Water leaking out the spout in front of door
Our ice bin is frozen in place. How to thaw without compromising food in fridge?
I used a hairdryer and hot water from tea kettle. Now, today I need to see if I can find the calcium build up? And I was bragging that I fixed. Only half fixed. Getting the ice defrost - done.
Where can i buy an auger motor for lg fridge?
Thanks.
Wish i could add a pic!!
AWESOME THANK YOU!
What is the part number for the icemaker?
Different model versions require different part number revisions. Same process slightly different part.
Can this cause the whole unit not cooling??
@@pierrenj79 no
Ice maker basket is broken
I wish you had demonstrated the things you actually talked about! Video is mostly about how to replace the ice maker, not visual demor on trouble shooting the cause of the trouble.
Every single other person on this comment section understood the repair. I'm not sure what you're confused about. Calcium builds up on the water fill tube, causing it to splash out of the fill tube.
What about if it's not leaking down in the back and is instead running out the front side of the ice maker and covering the entire front of the ice bucket with water as well as filling the rubber seals around the door which then all freezes solid?
How do you solve that problem?
IDK how to give super thanks sorry or I would.