Just installed today, I kept with the lines as best I could when I was finished I said to myself, it looks too high.. I’ll check Yamayari out and see how his look. Mine turned out the same way, they are a big help I can feel already. Thanks Man. Sorry to see you let the bike go.
Showed this to my girlfriend since she just picked up a mt09 and I wanted her to see the tank grips but she only saw benelli 135 in the backround since she has one also. Lol
I have a 22 mt09, looking at your video I noticed your seat has white stitching, is it stock if not is it comfortable and where did you get it !!! Ty in advance
The SP has an upgraded seat. I don’t think it’s technically the comfort seat but I feel that it’s a little more comfortable than the stock MT09 base model seat.
I have a FZ1N which I enjoy very much, I'm thinking about selling it and buying a MT-09 SP. Not sure if that's a good decision, but nonetheless I love your MT-09 content. Drive safely!
I love the looks of my Raven Black MT-09, I was really paranoid about installing tank grips on it, but I knew I needed them... Tank grips are much needed on the MT-09, that tank is slippery LOL Your video sold me, I ordered a set of TechSpec grips a few minutes ago. That said, the center tank protector, not going to be using it. It just doesn't look right, IMO.
Very cool. Thanks for watching and I’m sure you’ll be happy with them. Honestly the middle one for me when I lower it is better then I see it on other peoples bikes. But I wish they would’ve made a V to fit the logo under it as well. That would’ve been cool. Thank you for writing and ride safe.
gracias por preguntar. la MT10 como la R1 es una motocicleta demasiado fuerte para lo que hago. la MT09 tiene mucha potencia para la ciudad, la pista y mi área local. por eso elegí el MT09. pero estoy seguro de que la MT10 es una motocicleta increíble. especialmente el SP.
Love you Big Brother... Im from India... Watching your moto videos so long... Like your every video with specially Yamaha MT 09 SP Want to purchase Yamaha mt 09 SP... Wish... Yamaha lunch mt.09 sp in India...
Thank you for watching the channel. Means a lot to me! I’m happy you want a MT09 you will love it! India is a great country with amazing people. I hope you and your family are well. Ride safe!
Use a blow dryer and barely heat the sticker. Use your finger nail on one of the corners and peel it really slow as you heat it lightly. Do not apply to much heat because you will melt the sticker. After that use goof off to remove the adhesion portion of the sticker with a microfiber rag. Then you should be good to go.
Looks good yamayari 👍. I did clear ppf on my tank,front fender,all grey parts,and screen,everything is pre cut from Europe. Baught some tank grips on AliExpress,but yet on the fence to install it over the ppf. I love ❤️ it how your mom supports your Chanel and you tell her you love her. Cherish every moment nothing for granted.
My mom is everything to me. She’s a huge supporter of my life. For that she is queen. I appreciate your kind words. Thank you 🙏 Also I had clear tank covers before on a 636 I had and I did not like them too much. But it was over a dark color so it looked very weird. But black is not for everybody which I understand. And putting the tank pads on top of the clear sticker would be a pain if you ever had to remove it. But that protection package seems pretty nice. Do you have a link?
Don't like them. They don't cover the side of the tank. It should reach all the way. When you move around your pants will eventually be there aswell. Expecially if you are tall. Will be some other brand.
I will try harder to do that. I say I pick up 6 out of 10 when I see them. But I know I should do it for all. Thank you for watching the Channel as well.
Because of you i like mt09 sp most than other bikes available in India..
Just installed today, I kept with the lines as best I could when I was finished I said to myself, it looks too high.. I’ll check Yamayari out and see how his look.
Mine turned out the same way, they are a big help I can feel already. Thanks Man. Sorry to see you let the bike go.
Thanks for showing the best Do it yourself Videos of bike big brother 😊 like you every video's...❤
Was speaking to guy from tech spec and he said don’t use heat as the pad has tendency to move when fresh/warm
That's gonna my first bike... I like overall looks of mt09 sp...
Looking good bro. See you when you come out to Vegas..
Thank you. Vegas sounds fun! Ride safe 🙏
Love from India Big Brother... ❤
Stay safe and drive safe..
Personally I want something that blends in. That black doesn't work for me. I went for clear, so it doesn't kill the looks of the bike
Funny I thought the opposite. I see all that silver and feel like the black helps tone it down because it's such a big tank.
Showed this to my girlfriend since she just picked up a mt09 and I wanted her to see the tank grips but she only saw benelli 135 in the backround since she has one also. Lol
Lol great minds think alike 🙏
I have a 22 mt09, looking at your video I noticed your seat has white stitching, is it stock if not is it comfortable and where did you get it !!! Ty in advance
The SP has an upgraded seat. I don’t think it’s technically the comfort seat but I feel that it’s a little more comfortable than the stock MT09 base model seat.
I have a FZ1N which I enjoy very much, I'm thinking about selling it and buying a MT-09 SP. Not sure if that's a good decision, but nonetheless I love your MT-09 content. Drive safely!
Thank you for watching the channel. Means a lot! I think you would be happy if you did. But I understand for sure.
I love the looks of my Raven Black MT-09, I was really paranoid about installing tank grips on it, but I knew I needed them... Tank grips are much needed on the MT-09, that tank is slippery LOL
Your video sold me, I ordered a set of TechSpec grips a few minutes ago.
That said, the center tank protector, not going to be using it. It just doesn't look right, IMO.
Very cool. Thanks for watching and I’m sure you’ll be happy with them. Honestly the middle one for me when I lower it is better then I see it on other peoples bikes. But I wish they would’ve made a V to fit the logo under it as well. That would’ve been cool. Thank you for writing and ride safe.
Hola yamayahi una pregunta porque no cambiaste la r1 por la mt 10? Gracias!
gracias por preguntar. la MT10 como la R1 es una motocicleta demasiado fuerte para lo que hago. la MT09 tiene mucha potencia para la ciudad, la pista y mi área local. por eso elegí el MT09. pero estoy seguro de que la MT10 es una motocicleta increíble. especialmente el SP.
Love you Big Brother...
Im from India... Watching your moto videos so long...
Like your every video with specially Yamaha MT 09 SP
Want to purchase Yamaha mt 09 SP... Wish... Yamaha lunch mt.09 sp in India...
Thank you for watching the channel. Means a lot to me! I’m happy you want a MT09 you will love it! India is a great country with amazing people. I hope you and your family are well. Ride safe!
How did you get the warning sticker off the tank without being able to tell where it was?
Use a blow dryer and barely heat the sticker. Use your finger nail on one of the corners and peel it really slow as you heat it lightly. Do not apply to much heat because you will melt the sticker. After that use goof off to remove the adhesion portion of the sticker with a microfiber rag. Then you should be good to go.
Thanks
I really like the new bike bro.
Thank you 🙏 it’s a great bike. I feel fortunate for sure.
Looks good
Maybe no new MT09sp colour next year.
The 2023 on line shows the same color. But we shall see.
Looks good yamayari 👍. I did clear ppf on my tank,front fender,all grey parts,and screen,everything is pre cut from Europe.
Baught some tank grips on AliExpress,but yet on the fence to install it over the ppf.
I love ❤️ it how your mom supports your Chanel and you tell her you love her.
Cherish every moment nothing for granted.
My mom is everything to me. She’s a huge supporter of my life. For that she is queen. I appreciate your kind words. Thank you 🙏
Also I had clear tank covers before on a 636 I had and I did not like them too much. But it was over a dark color so it looked very weird. But black is not for everybody which I understand. And putting the tank pads on top of the clear sticker would be a pain if you ever had to remove it. But that protection package seems pretty nice. Do you have a link?
do they ship to Germany ?
Not sure. Just add it to the cart and see if the address lets it ship. Thank you for watching.
@@yamayari8351 thank you for the answer. Maybe I try :)
Don't like them. They don't cover the side of the tank. It should reach all the way. When you move around your pants will eventually be there aswell. Expecially if you are tall. Will be some other brand.
Looking good, but i have Yamaha orginal and they looks very good to. Ps If you see any turtles when you ride so take some picks off the turtles d.s
I will try harder to do that. I say I pick up 6 out of 10 when I see them. But I know I should do it for all. Thank you for watching the Channel as well.
Can you send me a pic of the original Yamaha one to my Facebook page messenger?
@@yamayari8351 I have sent some pictures on messenger. I dont have Facebook.
Looks good.
Love u mom ❤️