RUSTOLEUM PAINT JOB WITH SOLID PEARLS STEP BY STEP HOW TO
HTML-код
- Опубликовано: 30 сен 2023
- WANNA PAINT WITH PEARLS????
www.amazon.com...
USE THIS CLEAR COAT
amzn.to/3Sd8tRL
CHECK OUT KP PIGMENTS.COM FOR THIS MIAMI SUNSET PEARL AND OTHER AWESOME PEARLS!!!!!
WANNA USE THE PAINTING GEAR I HAVE?
SPRAY GUN SET UP - amzn.to/3TTm1mM
HOSE SET UP - amzn.to/4aXAZhy
AIR FILTRATION SET UP - amzn.to/48NTjrF
AIR COMPRESSOR SET UP - amzn.to/48vO68d
GREAT ALTERNATIVES IF YOU NEED IT CHEAPER????
GOOD BUDGET LVLP GUN SET UP - amzn.to/4aXkimk
GREAT BUDGET AIR COMPRESSOR - amzn.to/3O18eXx
CHECK US OUT ON ALL MEDIA PLATFORMS ALWAYS OPEN 24/7
WHITLEY AUTO WORKS OFFICIAL WEBSITE 😎👍🔥
➡️ / whitleyautoworks
INSTAGRAM 📷
➡️ / whitleyautoworks
TIKTOK ⏰🎥
➡️ www.tiktok.com...
MERCH 👕👟
➡️ www.bonfire.co...
👍➡️💯🙏 #WAWGANG
GOD BLESS YOU ALL!!!! Авто/Мото
Just a little more info guys......
This video is a basic layout but to be done with better quality materials. I would highly recommend only using 2k Urethane clear coat with rustoleum paint jobs to minimize the possibly of issues not 1k clear coats. You can use any of the tricks you see in my videos with pearls or flakes in regular automotive paint applications as well not just Rust-Oleum paint thanks for watching and god bless you all.
Nice work! Recently I used didspade pearl powder in some clear over rustoleum gloss black. It didn't really give it a pearl flop like I thought. It has more of a green hew to it. Have you had any luck getting a black pearl or house of colors type of out come from any powder in clear over gloss black?
I know KP pigments makes a black pearl if you want more of a finer natural Pearl look I would definitely look into the interference pearls they give it more of a ghost effect or natural smoothness thanks for watching
The end result of this video was simply AMAZiNG!!
Thank you for helping a working man satisfy his need for a rewarding project!
My car is in desperate need of paint. I don't have a dime to spare, so I was thinking about using what I have on hand. I have a gallon of each, synthetic enamel primer, Valspar John Deere Blitz Black, and automotive 2k clear. After watching this, I might could get some pearl powder to change it up. You gave me something to think about. That hood turned out great.
That hood came out speechless. You did a good job. Need that hood on my man cave wall. Lol. Thanks.
Right off the jump, I have 1 suggestion; had to pause at your 4th or 5th pass, I would suggest not FULLY releasing your trigger off edge. I'd try to release about half,(gun dependent,) to keep ypur steady airflow but halt paint flow, make ypur smooth wrist sweep and fully depress trigger flowing paint full PRIOR to coming back over the edge onto your next pass. It's absolutely simple, which is surely different from easy, but it's a good habit and will yield good result. Just my 2 cents. Again , congrats. Looks good brother
Thanks for the tips and thanks for watching
After watching your videos I took on painting my stepson's 07 Mazda3. Rustoleum gray base followed by TSC clear, 3 coats, with the first having pearl. Surpassed expectations, looks great. Thanks for the info!
Awesome man glad to help and thanks for watching
How long do u wait to spray the clear ?
@arealmaintenanceandrepairl1103 The can will tell you
Rustoleum Pro is awsome. I use it to restor lawn equipment and farm impliments
Yes sir that come out great. I asked about the destroyer Gray with Orange Pearl a few videos back. I got to say that come out great.
Yes sir thanks for the suggestion it was def pretty color combination 😎👍
Rustoleum works well as a primer for sure but you gotta think by the time you're buying pearls, clear and going through all the trouble of sanding and masking you can probably spend the extra $50 and get a 2k (base, clear and activator) paint kits off ebay that come in every color from any make or model of car featured in the last 30 years. No disrespect because I used Tremclad on my car the last time I resprayed...Just looking at the result thinking I might as well have done it right given how much sweat overhead there is in the prep work.
That orange came out very nice. I have a little more problem with trash (Bugs) in my paint as I have the great outdoors to paint in. I have not had the luxury of painting in a paint booth or in any enclosed area.
The last time I painted I had to hurry it up as I was chasing bad weather (the temperature was dropping, and the snow started about half an hour after I finished). Because of the time constraints I ended up tiger stripping the hood and will need to go over it when I get back to the United States.
Dude that came out awesome Beautiful color.
SHEESH got me rethinking rust oleum
Looks awesome. Great tutorial. I may try this with my 1990 Honda Accord project.
Bought a used Buick Park Avenue very cheap bèause the hood , trunk and roof had peeling clear. It was a deep forest green. Went to Tractor Supply and bought Oliver green tractor paint (1 qt) and aluminum (1 qt) for $9.00 each. Sanded it down and sprayed with 2 cans self etching primer at $5.95 each. Used spray gun to cover hood, roof and trunk taped off at the body lines. No need for clearcoat. Came out a nice two tone light over dark green that could have been factory.
Always informative, great content my man! 🙌 that Del Sol video gonna be 🔥!!
LOVE THE VIDEO MY BROTHER!!
You must be in the USA as Rustoleum here in Canada is $120.00 a gallon never mind the other supply's. I love your skill as well as your spirit of adventure in trying different things. Your truly informative on painting with different paints.
Yes sir I'm in the US North Carolina to be exact my channel is all about trying new things with anything automotive thanks for watching
There's nothing cheap in Canada !
The wall above the heater looks pretty scorched. Ishtar want to do something about that. 😊
I got a old regular cab short bed Toyota I’m going to try this on. Unless you need something to make videos with I’m in nc also
So I had an issue a little while back that was my own fault. I was cleaning up a Duster’s engine bay. Sprayed the Gloss Sunrise Red and didn’t think about the touch up period of time.
I cut in a lot of areas just with the rattle can.
I found that I HAD to scuff everything up with scotch bright pads due to how hard the paint cures, I will have to do the same if I squirt some clear on the jambs so it won’t chance fading.
Can’t wait to get started on the rest of the car
Only thing that sucks is the North Cackalacky weather being sketchy, lol
Rembrant masterpiece . great job Van Gogh
The black paint color issue you mentioned about non cleared oil based is the UV heat over time as to why it fades to satin
I'm definitely gonna try some new pearl packs ✌️
Im going to do this on my truck. To be used as a work truck. I have a shop like yours. But i will have to make some type of paint booth for sure.
Just started watching definitely looking forward to the end
Awesome work, GOD BLESS!!!!
I recently mixed up some Ace "Rust Stop" paint - 1 1/2 parts Harbor blue to 1 part Metallic Aluminum. Makes a real pretty light metallic blue somewhat like the old Chevy "Nassau Blue". So far, I've just brushed it on a couple of motors, but was thinking about actually spraying it on a car. Would you be interested in experimenting with something like that?
Yea def sounds interesting thanks for watching
The black really looks good and I’d give it a 4-5. The white really doesn’t pop as much in the video and would probably look better in person but I would give it a good 4
That was awesome!
I'd be interested to see what a 2 tone base, Say like a gray and black accents or even stripping, or a white and black accents or stripping, Just how much of a color difference there was between the 2 undercoats under those pearls, If you would notice a difference at all.
i love it looks very good
obligatory comment to feed the algorithm... good work, turned out nice!
If you use the Majic brand clear coat you mentioned from Tractor Supply over the Rustoleum, how long do you typically wait for the base coat to dry? The Majic clear recommends 7 days minimum, but I wasn’t sure if that only applies to the Majic base coat. The paint job looks great!
I usually give the paint a few hrs to settle but it does fine never gave me any issues.
@@WHITLEYAUTOWORKS thank you for the feedback! I’m planning on painting a truck soon and wanted to clarify. Thanks again!
@@BrianLChristopher no problem always glad to help
great video
It looks phenomenal!!
Nice work. 👍 love the orange doing a similar paint job on my s10.
S10. Classy man!
looks great! WOW
How about a gloss black and dark Grey with a silver ash pearl ?
Thats heck of a paint job looks good man
Looks really great.
Great video, and great job, Thanks
Came out great your doing everything I wanted to no about rustoleum how about showing some flat clears metallic over rustoleum
I def will be in an upcoming video so stay tuned and thanks for watching 😎👍
Spraying solvents, outdoor propane cylinder inside and open flame heater in spray booth. This could get interesting!
Thanks for watching
I would never recommend putting lacquer over and Alkyd enamel. I've done it in a pinch but there is so much that could go wrong...
I was casually watching until I saw that final product! That's world class!! Excellent video.
Around 10:30 " lvlp" gun..here I was thinking the whole time " bet he built that garage ".. carpentry background all I heard was "engineered beam pressure treated?" Lol. High Volume Low Pressure..that's what I use to rest my fender rafters on I guess. Cool video. I just ordered a mini astro gun to run on my 30gallon just for fun. Painted professionally back in high school but back to turning wrenches (at a much slower pace) these days at Volvo/Mack. Only spraying I di there is out of a Mack Can and it's over a weld or a drilled frane hole haha. I did just paint my truck tho. 3 trys to make it live-with able. Pretty slick tricks ya got tho. Congrats
Yes we did actually we built it about 23 years ago def needs some upgrades but it does the job lol thanks for watching
Looks great, I’m so surprised at that, how does the rustoleum compare on durability compared to a cheap automotive paint? I just subscribed, I like your style of going after it!!
In all honesty the dry time is a little bit longer on the Rust-Oleum but it lasts just as long as any other automotive paint once it cures out good thanks for watching
I agree with the thin spraying, but you have to be careful not to wash the color out.
You're very right and it really just goes to preference and what effect you're trying to go for this is more of an extreme example getting full coverage but you can use it for an accent as well thanks for watching
I must have missed the filtering of the mixed paint into the cup!
Show more on the paint gun. Tell me more about it how old would you buy again. I’m new I’m learning myself new subscriber. Thanks.
Check out my Vevor paint gun review video it shows and explains a lot more thanks for watching
Hi. I have a question & thanks for the great video.
When painting a vehicle - which budget primer should be used before the rustoleum oil based is used? I don't recall hearing you mention it . But if you did , I apologize
Honestly I've used many different ones the biggest thing is just making sure that your panels are clean thoroughly and sanded good before applying the primer but typically I use spray can most generic primers rustoleum duplicolor etc. to spot shoot and high build Nason filler primers through a gun for bigger repair areas hope this answered your question and thanks for watching
Dude it really help thanks
Awsum job bro…
Is a good idea to put your paint thru a filter into your gun
I think speedokote clear is a much better option without a huge difference in cost.
Could possibly be I've seen his products used I get these products cheaper because I work at a paint store but maybe in the near future I will do a review on them thanks for watching 😎👍
nice
Good job brother it looks pretty wet
When buying the rust-oleum paint from Loews are you just buying base colors, or will they mix up a particular color for you? You probably have a lot of leftover paints and mix your own, but that would be a lot of trial and error for us.
I'm buying generic off the shelf colors but you can also apply this same procedure to spray can rustoleum where there's a bigger selection or automotive paint. This was really just a basic guideline for how to get a unique Pearl paint job for cheap. Feel free to check out my newer series where I use a multitude of different rustoleum colors and Pearl combinations Thanks for watching
Nice job. I’m considering painting my truck. What equipment do you recommend?
It really just depends on what your budget is I have personally been using Vevor paint guns lately they are very affordable and a good compressor / filtration set up is key to a good paint job. My set up is in my video link below if you want to watch and get an idea of what to get thanks for watching
ruclips.net/video/RwlljTaDH38/видео.htmlsi=QSMDjvQ-egBvUH6P
and also if you want it to lay out like base coat mix that 50/50 especially spraying with hvlp/hte ive done paint and body 15 years or better and grew up in a body shop
I'm showing a step by step mostly for beginners 50/50 is great too. I've been painting over 20 yrs myself and not really trying to say any way is better or wrong. I'm just giving everyone a basic guide to go off of and they can tweak things from there to find what works best for them thanks for watching
Nicely Done
Thanks!
Thank you for the super chat and God bless
very cool, thank you
Does the tractor supply clear have UV protection or can we assume it will chalk up like Rustoleum after some time
I don't recommend the tractor supply clear it doesn't have very good UV protection at all definitely check out the speedo coat 2k urethane clear coat I have in the description of my videos thanks for watching!!!
Awesome!
Do have any recommendations for a primer sealer?
Also does hardener actual increase durability or just reduce dry time?
I've used a bunch of Nason brand primers through my gun and the transtar 6401 in the spray can works great and as far as the hardener goes it helps with durability over time and obviously dry times is the big thing
nice job kid.
That looks great. How long between coats of paint?
20 to 30 mins between base coats and 30 to 45 mins between pearl coats thanks for watching
Great vid man! Got a question.. how long do you wait between coats?
Typically I'll wait 20 minutes between base coats and 30 to 45 minutes between clear coats hope this helps thanks for watching
How long minimum should you wait to spray clear over rustoleum? I will be using hardner in my rustoleum. I want to avoid wrinkles fisheye as much as possible
My suggestion is if you were going to apply clear coat and want to minimize issues as much as possible I would not put a hardener in the rustoleum just wait an hour for everything to flash off good after your last coat of Base and then you can start applying coats of clear thanks for watching
What is a good mixture ratio For Tractor Supply paint
Typically I will start with 60% paint 40% thinner because the tractor paint is a bit on the thicker side but you can always thin it out more to your liking if you still think it's too thick thanks for watching
Do you have to put pearls in the clearcoat? or can you mix it with the paint instead and then put clearcoat on top? Is there a difference?
If you mix these pearls in the paint you get a metallic paint effect so it does matter which you choose feel free to check out some of my other spray out vids thanks for watching
looks nice
Thanks
How do i spray silver metallic for a 78 trans am
You can do it with rustoleum black and adding a silver pearl clear coat mix on top
Nice job
Does the tractore clear offer good uv protection on fading & water socking throw to the body filler
No I've been recommending everyone use a better clear than the tractor clear its great for test panels but doesn't carry the best UV protection and there are way better choices in the same price range. Look into speedokote 2k urethane clear on Amazon for around $75 shipped or Nason products thanks for watching.
Great instructions! I'm about to repaint my 2004 Crown Vick Chestnut Brown and want a translusient Pearl... So how and wat pearl would I use for that??
BTW... Do you always wear flip flops so you can get the piggies pianted at the same time?? 🤣😂😀
Yeah I'll wear those things so I get better aerodynamics while I'm gliding around doing my paint work LOL what you want to look up is interference pearls check out kp pigments they have a lot of good ones to choose from
Do you have to polish the paint with robbing when ur done painting?
You Don't have to but you can just like any other automotive paint job thanks for watching
Very informative! New to your channel and Just subscribed! I will search your other videos but if you haven't covered the tip sizes you use and did you remove the gun cup screen for the pearls? Great video! Thanks.
Yea I don't use a cup screen with the pearls and I use a 1.4 tip for base and clear. I use a 1.7 tip for shooting high build primer and heavy flakes. Thanks for watching
Thank you for the information, I am going through your videos and found some of this on your comparing flakes and pearls video. You are the best on these videos!
No problem always glad to help
I never could get the paint shop clear to stay glossy. Always had a haze even after buffing
Yea I would agree I'm not the biggest fan of it either honestly i say use auto clear like Nason speedokote etc. Thanks for watching
How would you get a sherwin williams "Salty Dog" rustoleum color?? Want to paint my outdoor railings & the basic colors are meh . Would be a sweet car color
You could get safety blue in rustoleum and some black then tint the blue down to the desired shade you want yes it would be a cool color on a car also thanks for watching
Idk if I missed it so to do clear over Rustolium u don’t have to wait ?
Yes wait for the base to completely flash off then apply your clear coat thanks for watching
How long to dry between the rusto to the pearl coat? Flashed or fully set?
You want it to be tacky to touch but not to where it's pulling paint. It should still have a tack touch the tape in multiple places if it sticks to your finger but doesn't pull off paint you're good to go
My experience with rustoleum ready to spray automotive paint from the auto parts store is its complete trash your better off adding the extra cash and getting a 2k clear from ebay
There are tons of options available I should know I work at a paint store but this is just one way to show people how to be creative using different kinds of paint thanks for watching
Would love to see metalflake over Rustoleum!
Nice information Looks like a german paint gun, Sata 3000 RP, Im 63 years old and started painting in 1976 with a binks #7 and i have two sata jet guns, they make a difference, Keep the content coming, You better have good insurance cuz a mosquito will try to land on that finished paintjob, slip and break a leg and then sue your a$$. Flies too, Lol
Yea I know what you mean I've been using my SATA digital 1000 it's 20 years old lol thanks for watching 😎👍
@@WHITLEYAUTOWORKS have you tried heating the paint before you spray? It really helps flow out and a quicker drying time. Thanks again for your advice.
@@michaelmaher4328 yes sir works great
What size tip in your gun?
1.4 tip
What you do to take out the orange peel? Dramatic difference between the cut before 26:39, and then after.
If you saw any variation it was the paint settling I didn't do anything to take out the orange peel. However if afterwards you do have any and your not satisfied you can cut and buff all the same as with automotive paint jobs thanks for watching.
@@WHITLEYAUTOWORKS Appreciate your reply. Seems to have set very nicely. Decent paint for non-factory resprays.
Nice job how long u wait for flash time between coats
Typically 15 to 20 for the base and 30 mins for the Pearl clear coats thanks for watching
Nice
Question: how long did you wait between the base coat and applying the clear coat with the pearl?
I always wait till the Rust-Oleum dries enough to the touch to where it's tacky but doesn't pull paint off on your finger check it in multiple places by touching the tape then your good to go typically about 45 mins to an hr thanks for watching
@@WHITLEYAUTOWORKS thank you so much for the quick reply! I've seen videos of people waiting 48-72 hours, and they get a bad reaction with the clear. I think I'll try the Rust-Oleum paint in my old Camry because of what I've learned from your channel! You have a new sub buddy! I'm in. Thanks so much sir!
@Bigmitch_2001 just make sure you use urethane clear coat most ppl have issues cause they use acrylic based clear and it shrinks thanks for subbing
@@WHITLEYAUTOWORKS Sorry to keep bothering you, but I don't know the difference between urethane clear, and acrylic clear. is urathane clear 2k?
@Bigmitch_2001 they both can be 2K clear if you look in the link of my videos to my Amazon page I have products called as seen on RUclips I have Speedokote urethane clear it's about the cheapest you can possibly get and is very good quality if you want to check it out but yeah it will say it on the can
How long did u wait before u laid the pearl on the rustoleum, great knowledge and video ..whats color was the rustoleum paint and where do u normally get ur rustoleum from
The color was a custom mix by me smoke gray gallon with a quart of gloss black added to darken it. I waited an HR before shooting the pearls and did 30 to 45 mins between coats I got the paint from Lowe's home improvement store also at home Depot as well.
@@WHITLEYAUTOWORKS thank u... was the pearl u used on the hood a paint with pearl or kp pigment brand
@@lssleepers6464 kp pigments Miami sunset
@@WHITLEYAUTOWORKS also that clear u used look like it work pretty good for ready to spray,what brand was it ,I'm looking to try some out on one of my cars
@@lssleepers6464 I used a combination of clears but if your not going with the tractor supply clear I would recommend the duplicolor paint shop clear in the quart can for small jobs if your going full paint job I'd say get the tractor supply majic clear gallon and hardener or automotive clear such as high teck 7000 from a paint store such as Napa Auto it's the cheapest automotive clear at around $70 for everything.
No you didn't ! Looks great how would that have turned out with white underneath?
With white as the base it would have been very hard to get full coverage being that this is a pearl if you want to check out some of my other videos you can get a better idea of different mixes with different colors and Pearls thanks for watching
Thanks my wife just rolled painted my truck and got good reviews And yes White 🤍
Three weeks of prep work 💪
Very cool 😎👍
good show chap, what respirator r u using?
Just your basic 3m respirator nothing fancy thanks for your comment and thanks for watching
I know it's really cool to have music in your video but whoever is mixing it is mixing it way too loud. It could be in the background a lot more I enjoy watching the process and hearing you talk more than listening to programmed music. Anyway just saying. Thanks for sharing
I appreciate the comment I have since upgraded my equipment and I'm working constantly to improve my videos thanks again for watching
Hey mate my my son wants to paint his car dark blue but once to put some silver flake in it but he does want to use a clear okay just add it to the paint or not cheers Graham
Yep you can add it into the base to give it that little bit of sparkle thanks for watching
@@WHITLEYAUTOWORKS thx for getting back to me.
@@theaussienurseflipper.8113 no problem anytime
nice job man .what color flake was that??
Miami sunset kp pigments very cool color thanks for watching
To do like a flip flop what is involved? GOD BLESS
It's the same process I will actually be doing one pretty soon for my wife's CRV so stay tuned for that vid thanks for watching 😎👍
What size compressor are you using?
5 hp 80 gallon Ingersoll rand it's about 20 yrs old but does the job