How to Replace Door Hinge Pin with Roller 2007-2013 Chevrolet Silverado 1500

Buy Now!
New Hinge Pin with Roller from 1AAuto.com 1aau.to/ia/DMDM...
This video shows you how to install a front door hinge pin with roller on your 2007-2013 Chevrolet Silverado 1500.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Pry Bar 1aau.to/oPY/1AX...
• 10mm Socket 1aau.to/oaZ4/1A...
• 11mm Socket 1aau.to/objE/1A...
• 13mm Socket 1aau.to/objE/1A...
• Grease Gun
• Channel-Lock Pliers 1aau.to/ojY/1AX...
• Ratchet 1aau.to/obtx/1A...
• Socket Extensions 1aau.to/objE/1A...
• Drill
• Block of Wood
• Gloves 1aau.to/oRG/1AX...
• Painter's Tape
• Safety Glasses 1aau.to/oJ2/1AX...
• Floor Jack 1aau.to/oXK/1AX...
• Hammer 1aau.to/oRg/1AX...
• Punch
• Vise
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@daviddavis9025]

Great video! I just followed it today to replace the pin on my Silverado.

[@aprox23]

Nice tutorial, bud. Im going to have to change my passenger's door pin soon, as its making loud noises and rubbing sounds when it gets open. Seems relatively simple.

[@TheCgilliam]

Today I replaced my pin in drivers door. This video is nice, but I can tell where they stopped or cut video because they had trouble. The third mysterious bolt needs to be removed first before you install jack, I would recommend removing the back finder bolt next. Then, install jack and remove the rest of the bolts. Without the jack in the way I was able to close door a little to better reach those two bolts.

[@customwoodshiftknobs9322]

Might be easier(faster) to replace the entire hinge assembly.

[@richardballew8958]

Am I correct in assuming this will also cover a GMC Sierra '07-13?

[@seanpaula8924]

Nice. Thanks for the videos ✌👍

[@jakesbaked4206]

There's a hole other hinge up top, I'm cringing about not cleaning off that after drilling

[@retiredperson4054]

How long do the rollers last before having to be replaced again?

[@TRQ]

+Retired Person There is not a specific timeframe for how long the roller pins will last.

[@Seeking2FindBalance]

Very helpful, thank you!

[@alexgarcia-ix3yd]

Very bad instructions

[@TimSefried]

I can’t get to the last bolt and he doesn’t show how he did

[@KSimmonsKenny]

Thank you for the help