Well timed video as im just about to put exactly the same size tyres on my collie 👌🏼 Only difference will be i'll have a 2" suspension lift before the tyres so im hoping to do less grinding
Awesome mate! Yeah they look good hey! Just an FYI, the wheel i have is a 16x8 with Pos20 offset. Hopefully you don't have to do as much grinding as me.
@@CallMeMurqqa +30 better for stealth 265 or 285/75 r 16 with minimal cutting. 0 offset means you will do more cutting and have more problems including chopping and plating the body mounts just behind the front tyres. If you love the poke look be prepared to get the grinder out! 😁😁
I’m way late to the party here but swhat was you actually grinding down on the backside of the finder? I assume from what I can see and hear that you were grinding on metal. Did you cut or anything on the bottom of the wheelwell liner? If you did, how did you reattach the liner on the bottom to the body of the wheelwell?
Might be because they aren't quite as wide, could the offset of the rim etc. I may put a suspension lift in but I do have other plans for the ute. So not too fussed at the moment
Your right about 31.6" but people will refer to 32" because it's as close to 32" a metric tyre size can be, in there defense some brand tyres do come with deeper tread depth which is closer to 31.8ish. I know one brand I had was closer (brand new) to 32" than 31". Maybe they can be forgiven
275/75/17 on my rc 2011 hooden Colorado .. 2 inch lift .. torsen bar upgrade .. and upper controll arms .. no rubbing best tips wheel alignment useless get a laser alignment ..
That's awesome! I was nearly going to go 275 but I got different long term plans, so I'm not too fussed at the moment. What upper control arms did you buy?
@@AutomotiveActionMedia hurry it up .. in Victoria no one NO ONE will even attempt to do it closer i git to go new castle lol but be worth it .. Victoria laws in 4x4 have just gone to s!@t .. 35 down on tyers soon be 33 .. and things like mud flaps have to reach your axel high at less half way down tyer .. thats STUPID and dont go on about spot lights lol .. what i cant understand is how they make these laws with out even a fight so freens keep us out of parks eg victoria only state cant drive on a beach ... sad
@@stuartsheil4234 Yep I hear ya there. But I'm based in QLD. Those laws already apply to us. Our max is 33. Mudflaps half way down the tires etc etc. It's a real shame we can't have a sense of freedom in Australia and our country and roads should definitely allow for upgrades on our 4wds
Bummer about being stuck down there mate! This is a very common issue and would love to develop some offset and adjustable upper control arms for the people here is Oz since I cant seem to find any. Being a boilermaker will make it a breeze, i just don't have a workshop at the moment since moving.
@@chiphood2966 Yeah depending on the offset, people can get away with that size. Stock wheels i think have a Pos38 offset, The wheels I have are Pos20 with ever so slightly taller tire than yours.
@@AutomotiveActionMedia yeah still surprised considering stock size tyres looked like they were almost scrubbing. Was meant to put 265/75/16 on but the shop ordered the wrong set
That’s a work horse there off-road for real what it’s built for 👍🏾👌🏾
Just getting out there and having fun!!
Well timed video as im just about to put exactly the same size tyres on my collie 👌🏼
Only difference will be i'll have a 2" suspension lift before the tyres so im hoping to do less grinding
Awesome mate! Yeah they look good hey! Just an FYI, the wheel i have is a 16x8 with Pos20 offset. Hopefully you don't have to do as much grinding as me.
@@AutomotiveActionMedia Ahhh cool, im hoping to go 0 offset so i'll see how I go
@@JDTiling Let us know how you go.
@@AutomotiveActionMedia is it better to have positive 20 offset or go closer to 0 offset?
@@CallMeMurqqa +30 better for stealth 265 or 285/75 r 16 with minimal cutting. 0 offset means you will do more cutting and have more problems including chopping and plating the body mounts just behind the front tyres. If you love the poke look be prepared to get the grinder out! 😁😁
I’m way late to the party here but swhat was you actually grinding down on the backside of the finder? I assume from what I can see and hear that you were grinding on metal. Did you cut or anything on the bottom of the wheelwell liner? If you did, how did you reattach the liner on the bottom to the body of the wheelwell?
why not a 2" lift kit ? I got ome on my d-max and running 255/75r17 ,no cutting or scrubbing
Might be because they aren't quite as wide, could the offset of the rim etc. I may put a suspension lift in but I do have other plans for the ute. So not too fussed at the moment
At how many kms did u get your clutch replaced? And did you have a lift when you put those 265/75s on and had to chop up your guards? Cheers
👍
If you do a body lift install. The video will get loads of views!
I sure hope so! Will see what the future looks like
When is the body lift vid coming????
Your right about 31.6" but people will refer to 32" because it's as close to 32" a metric tyre size can be, in there defense some brand tyres do come with deeper tread depth which is closer to 31.8ish. I know one brand I had was closer (brand new) to 32" than 31". Maybe they can be forgiven
We will give them some grace 😅
Love your vids , would you ever do a body lift one ?
I am considering a body lift so there is a chance I may do one!
Is ur truck RWD OR AWD ????
Will the 265/75/16 fit without chopping if I have a 2" lift on rear and front torsion bars wound up?
I believe most people do get away with it. But when offroading on compression of suspension, it will still rub. Hopefully not on daily duties though
265/75r16 fit stock '05 Ra Rodeo, only rubs in reverse at half lock
@@DavidVoxDem On stock pos offset rims yes. On any other rims - No
I have an 04 rodeo and about to buy the same size tyres I was worrying about the fitment haha but I'm sure it should be the same as the 05 then
275/75/17 on my rc 2011 hooden Colorado .. 2 inch lift .. torsen bar upgrade .. and upper controll arms .. no rubbing best tips wheel alignment useless get a laser alignment ..
That's awesome! I was nearly going to go 275 but I got different long term plans, so I'm not too fussed at the moment. What upper control arms did you buy?
@@AutomotiveActionMedia lol you going to a soild axel too in the frint lol same ..
@@stuartsheil4234 maybe 😉
@@AutomotiveActionMedia hurry it up .. in Victoria no one NO ONE will even attempt to do it closer i git to go new castle lol but be worth it .. Victoria laws in 4x4 have just gone to s!@t .. 35 down on tyers soon be 33 .. and things like mud flaps have to reach your axel high at less half way down tyer .. thats STUPID and dont go on about spot lights lol .. what i cant understand is how they make these laws with out even a fight so freens keep us out of parks eg victoria only state cant drive on a beach ... sad
@@stuartsheil4234 Yep I hear ya there. But I'm based in QLD. Those laws already apply to us. Our max is 33. Mudflaps half way down the tires etc etc. It's a real shame we can't have a sense of freedom in Australia and our country and roads should definitely allow for upgrades on our 4wds
Arh i miss qld. Stuck in Victoria now. My stock size tyres on 50mm lift almost scrape so haven't upgraded yet
Bummer about being stuck down there mate! This is a very common issue and would love to develop some offset and adjustable upper control arms for the people here is Oz since I cant seem to find any. Being a boilermaker will make it a breeze, i just don't have a workshop at the moment since moving.
@@AutomotiveActionMedia upgraded to 265/70/16 still on stock rims and no rubbing even off road surprisingly
@@chiphood2966 Yeah depending on the offset, people can get away with that size. Stock wheels i think have a Pos38 offset, The wheels I have are Pos20 with ever so slightly taller tire than yours.
@@AutomotiveActionMedia yeah still surprised considering stock size tyres looked like they were almost scrubbing. Was meant to put 265/75/16 on but the shop ordered the wrong set
Hey mate nice collie. I have a 2015 collie with a 2 inch lift, would she scrub on 33s ?
hey man i wanna know this aswell
did you find out
Did you grind the body or just the guards
Just the mud flaps, didn't even grind the flares either.
What offset rim are those mate
+20 ✌
wait till u go off road