What a great solution for folks with larger tires. I’m thinking a spare doesn’t need to be a “permanent” solution. It might work to buy the lightest weight narrowest wheel, tire combo that is nearly the same diameter as the tires you run?
Impressive! Damn, this is a lot of work and money just to hold a spare tire. I added 35x12.50r20 to my F250 so my stock truck could fit the spare, but it sure doesn’t look as good as 37s. But I’ll live. Lol
Awesome video!!! I have 2016 super duty with fully optioned pintop system & add a pack. Does the rim size or offset matter? Tires are Toyo R/T 37X12.5/18. Rims are Method Race Wheels Mesh [Size, Bolt Pattern, Offset/Spacing:18x9 8x170mm 18/5.75"].
What is the shop time you list for the installation? I’m about to have a Backcountry kit installed on my 2022 F-350 Tremor and I may have them add this while they’re doing the install. I’d like to know how much labor cost to expect. So what is the “book” time for this install?
It appears to be lower than the factory mount by a good amount hurting departure angle. No good for me since the purpose of going to 37s was for ground clearance kind of defeats the purpose.
Seems kinda half ass if you have to undo the ratchet from the center of the hub. Good night if its covered in mud or the ratchets corroded. Maybe the R&D was done by the person who thought the welds were any kind of professional. You want it TIGed then tig the damn thing, don't put fake ass shade tree mig tacks all over it. As a company a lot of your shit is cutting edge. Sorry Im a dick on shit you did a year ago. Please send me a dominator for my 24 f250 tremor. Your pal George
What a great solution for folks with larger tires. I’m thinking a spare doesn’t need to be a “permanent” solution. It might work to buy the lightest weight narrowest wheel, tire combo that is nearly the same diameter as the tires you run?
Got mine for my 23 along with the 5.5 pin top
Impressive! Damn, this is a lot of work and money just to hold a spare tire. I added 35x12.50r20 to my F250 so my stock truck could fit the spare, but it sure doesn’t look as good as 37s. But I’ll live. Lol
That clip brings back fond memories. 😎
As far as modification goes on the 11-16 trucks, is their anything noteworthy about those years when putting a 37” tire in the factory location?
Drop your winch, crank the tire into position and enjoy. :-) Nothing needed.
Is a 38 the largest tire you can squeeze into it? Looks like there is still a little room, could you fit a 40”??
Does this work with retaining the Banks DPF-Back exhaust... It's larger tube but seems to curve more to outer side.
Do you leave the exhaust like that or are you supposed to extend it?
Awesome video!!! I have 2016 super duty with fully optioned pintop system & add a pack. Does the rim size or offset matter? Tires are Toyo R/T 37X12.5/18.
Rims are Method Race Wheels Mesh
[Size, Bolt Pattern, Offset/Spacing:18x9 8x170mm 18/5.75"].
The offset doesn’t affect the fitment into the factory hitch on the 11-16
Thank you
Great idea but the trophy hitch does not have the same weight rating as my stock hitch….stock hitch is 20k tow with 2k tounge.
😀👍🏿Good to know.... 2016 F250
What is the shop time you list for the installation? I’m about to have a Backcountry kit installed on my 2022 F-350 Tremor and I may have them add this while they’re doing the install. I’d like to know how much labor cost to expect. So what is the “book” time for this install?
2-3 hours without exhaust mod, 3-4 with it.
Will you be releasing a 2019+ HD Ram version?
Watched it as a Ram owner anyways just so I have a reason to hate Ford owners even more
Hahahaha
Is it a 2 1/2 inch shank still? Does it retain the factory towing capacities. I own an 18 F250
The production hitch is a 3" shank!
@@thecarlisuspension nice! Does it retain factory capacities?
@@2191JDHARRIS Sure does! Hit the link the the description to the product page - it'll take you to the full testing we did!
Where are you guys located
Whats the info on the air bag set up?
Can you send me one so I can do a video at my friends truck shop!?
What about a Ram 2500 with a 35” spare?
It appears to be lower than the factory mount by a good amount hurting departure angle. No good for me since the purpose of going to 37s was for ground clearance kind of defeats the purpose.
Trophy Hitch? Is that how you get a trophy wife!
when are you gonna fabricate one for Ram?
Will this fit 2022 f450?
It has not been tested on a F450 at this time.
What about a 35" tires
Aren't 35s stock? Shouldn't need this if it's a factory size tire
I need one
No Ram….. damnit
Seems kinda half ass if you have to undo the ratchet from the center of the hub. Good night if its covered in mud or the ratchets corroded. Maybe the R&D was done by the person who thought the welds were any kind of professional. You want it TIGed then tig the damn thing, don't put fake ass shade tree mig tacks all over it. As a company a lot of your shit is cutting edge. Sorry Im a dick on shit you did a year ago. Please send me a dominator for my 24 f250 tremor. Your pal George
I need the sway bar thing and steering stabilizers as well.
3x tee shirt wouldn't hurt. hat maybe?