Speed Testing 16 RC Car ESCs Hobbywing 1060 1080 TBLE-02S TBLE-04S ISDT ESC70
HTML-код
- Опубликовано: 17 авг 2024
- I tested 16 ESCs to see which one can spin the M-06 Europa rear tires the fastest. #esc #tamiya #rccar #rcelectronics
I tested the ESCs in:
Tamiya 1/10 Lotus Europa Special M-06 Kit, TAM58687
alnk.to/2jHCTmS
Tamiya 1/10 2017 Grasshopper II 2WD Buggy Kit, TAM58643
alnk.to/3y6VL4u
Tamiya 1/10 R/C Ford Escort Mk.II Rally MF-01X Kit, TAM58698A
alnk.to/bP8xRqY
Tamiya 1/10 Nissan Skyline GT-R R32 4WD Drift Spec TT-02D Kit
alnk.to/4BBtE05
-----------------------------------------------------------------------------
WHICH BRUSHED ESC IS THE FASTEST? PART 1
• WHICH BRUSHED ESC IS T...
UNBOXING ISDT ESC70
• UNBOXING ISDT ESC70 Fe...
GLOBACT 80A ESC 550 12T MOTOR
• GLOBACT 80A ESC 550 12...
-----------------------------------------------------------------------------
Hobbywing QUICRUN 1060 Brushed ESC
alnk.to/7WZW1Rh
Hobbywing Waterproof QuicRun 1080 Brushed Crawling ESC
alnk.to/87UH0Ix
Kyosho KSH KA060-91W 60A Brushed ESC
alnk.to/4Xr3lYy
Dynamite 1070 Brushed ESC
alnk.to/6mL3s4N
HPI SC-3sWP2 Brushed ESC
amzn.to/3j1ajCO
GLOBACT Waterproof 550 Brushed Motor 12T and 80A ESC Brushed Motor ESC Combo
amzn.to/3kzOuey
GLOBACT 21T 550 Brushed Motor and 80A ESC Brushed Motor ESC Combo
amzn.to/37WJ7U8
ISDT ESC70 70A Brushed ESC
amzn.to/38QA3zV
Hobbywing Waterproof QuicRun 1080 Brushed Crawling ESC
alnk.to/87UH0Ix
Hobbywing THW 1060 Brushed ESC (included in newer Tamiya kits)
www.ebay.com/i...
Tamiya TBLE-02S Brushed/Brushless ESC (included in older Tamiya kits)
www.ebay.com/i...
Generic 60A Ebay Brushed ESC
www.ebay.com/i...
GoolRC Clone 1060 Brushed ESC
www.ebay.com/i...
GoolRC 60A Brushed ESC
www.ebay.com/i...
RAIN RC 320A Brushed ESC
www.ebay.com/i...
No Brand 60A Brushed ESC
www.ebay.com/i...
KYRC 60A Brushed ESC
www.ebay.com/i...
RAIN RC 480A Brushed ESC
www.ebay.com/i...
TAMIYA ESC TBLE-04S Electronic Speed Control
www.ebay.com/i...
Digital Tachometer Laser Photo Non Contact RPM Tach Meter Motor Speed Gauge
www.ebay.com/i...
-----------------------------------------------------------------------------
Find me on Instagram: / rcsrccars
Check out my Facebook Page: / rcs-rc-cars-1037696347...
Follow me on Twitter: / rcsrccars
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting RC's RC Cars so I can continue to provide you RC Car content! Авто/Мото
Hi there, this is just what i was looking for. Im on the hunt for some nice cheap 60A esc´s and this test was very helpful. Thanks a lot.
Thank was a very informative comparison. Thank you
Great Video. I've been running a New Rain 320A w/fan for quite awhile now in a 1/10 cheap basher on 2s, still running. 👍
Thanks a lot, very informative
Thanks for the information.
You’re welcome. Thanks for watching.
Tamiya battery connectors are terrible and wear out and become lose.
This will cause a major loss in power and create variables in the amount of current available between each connectors lose/tightness.
Tamiya connectors can damage the esc, stop using the Tamiya connectors and start soldering quality connectors.
I haven't experienced any of those problems myself but thanks for the feedback.
Brilliant testing and great to know the results. Maybe next try the same tests on a faster brushed motor - say 23/25 turn or better and brushless motor where possible.
Good idea. Thanks.
Outstanding video. Do you have any idea how the Traxxas XL5 would compare to the ESCs in this video?
Very nice video, it was in my suggested feed from the RUclips AI, I liked it a lot and I have subscribed!
Very well presented, I agree about everything you said, and I have the same favourites, ha ha! HW1080 is my all time favourite, both for crawlers and buggies, but recently I started buying ESC70 and I have been very happy with them. You asked about that Rain ESC, I had one and it died first time I ran it, it was a 15 turn motor and a Tamiya DT-01 buggy that killed it, and to be fair, that combo also killed a HW1060, ha ha!
I've just killed my Tamiya hobbywing 1060 in my Tamiya mf01x chassis.
I fitted a 23t pinion, TL01 high speed gear set and I stiffened up the rear diff with silicone ear plugs. So yeah....I think that was all too much for it. 🤬🤣
I'm now trying to find an esc that'll be able to cope with these mods.
Great video
Which one will run an 8 turn motor ?
Almost forgot I put a capacitor on it. And I’m running a 13t hacmoto brushed.
Would’ve been cool if you tested the tble-02s like shown in the thumbnail 😮
You are right. I don't know why I didn't. I know it's very similar to the TBLE-04S.
Hey mate, I've been running a rain 480 in a WL TOYS A979 for a few years, it's the only ESC I've put in that car that hasn't fried itself and still going strong!
What motor and you using 3s
I would add the Carisma ARC-2 ESC. I use them in my brushed crawlers and I prefer them to the 1080
Hi what 1 do you think can handle 3s 13t brushed motor on gorgon
That no brand esc was actually used by hsp on their smaller models. I know that, because I have one.
I ve got new rain 35a/160a with 390 brushed motor in Wltoys a979-a(my fpv car) on 2s 30c lipo and its preaty good overall/ geras 17t/38t.
Please forgive me if my questions sounds stupid or ill-informed but I am new to all of this and have much to learn. I am building a crawler with a real time camera mounted on it to use for crawl space inspections. The intended purpose for this vehicle calls for low speeds, forward and reverse. I am understanding that I need two ESCs to drive the two separate motors on my tank chassis. I actually have two pair of ESCs. I have two Hobbywing 1625s and two New Rain 160As. First question: Which of these would suit my purpose best? Second question: I've been told that I must switch the master controller on first and then switch on the slave unit. I have a master switch on my battery pack. Would they work just as well if I bypassed the on/off switch for each and let them power up together when I switched the battery pack on? And the last question: If my receiver is powered from another source, should I remove the red power wire from BOTH of the ESCs? Oh. The receiver that I plan to use is the Flysky FGr12B, if that makes any difference.
Thank much!
Unfortunately I do not have any experience in tank electronics or dual ESC setups.
@@RCsRCCars Thanks just the same.
I'll try to help : either pair of ESCs will work fine because of the extreme gearing on a tracked vehicle. If you have a separate receiver battery, you should remove both red wires because both ESC's will deliver receiver power through their BEC. For the next bit I'm not a 100% sure but the 'master-slave' thing you mention specifically applies to brushless ESCs - I think.
New subscriber
Thank you for watching!
Did you ever do the test with the euro truck?
Im gonna buy the IDST 70 and give it a try.
The mobile app is pretty interesting. I like being able to see the throttle %.
So helpful my question is better repair compactors or get another oh its brushed i bought online from Walmart for like 12.00 or something and brand is Bdesc-s10e- rtr 2-3 lipo -5-9 nimh bec 5-v 2a xijaia0206 bought in September last yr what happened was i used two nimh 1500mah it went very fast but then it stop working lol i knw too much power oh my car is a fast and furious doms 1/12 charger it has dual 380 motors ftont and rear so whats best advice u can give me to be able to tun this vehicle thank u sincerely mike from Redford Michigan
I'm not familiar with the car or ESC you mentioned. I don't want to give you any inaccurate advice. Best to contact the manufacturer.
I have the rain 480 esc but it’s in a shelf queen. I’m thinking about running it🤫🤫
I don't know which car I should put the 2 Rains into.
@@RCsRCCars I have mine in my tamiya TL01
Is goolrc 60a clone same with hobbywing 1060?
A lot of brushed ESCs have the same layout and form factor as the HW 1060. I've never cracked one open to see inside.
Across the esc, who can handle 3S Lipo nicely without burning?
The only 3S/brushed experience I've had is with the HW 1080 in a TRX-4. I had no issues there.
i’m using the isdt with 3s 5200mah 80c that’s fine in my crawler
Rain 60a can handle 2s and 3s batteries
Hobbywing 1060 =carson?
the no brand 60 literally burnt up in like 20 minutes for me
figured out why
the jumpers programmed the esc to use nimh batteries
didnt program it myself, was already on nimh instead of lipos
Mine burned after 10 minutes 😬
That was the most pointless test i've ever seen... You proved nothing...
very nice
Thanks