Thank you so much! Earlier I had just finished assembling the Tamiya lunchbox and it wouldn't reverse, now it can because of your video, again thanks a lot!
@@RC4X4 I'm hearing it won't I just can't believe it's going to take more ability to take amps like up to 75 but it doesn't change the motor as far as I know it's limits are.
@@RC4X4 the description says the new 04s has 2 low voltage battery modes, HI and LO. I will use the HI as it will save my 2s batteries, cutting it off at 3.1volts per cell. Which is still pretty low
Remember to activate your brake setting first before anything else... mine was not enabled and made the setup initially frustrating. You expect these to just work as they come with some kits.
I'm with a problem, where I've set all those steps for my Carson and it simply throttles backward! I've tried to turn reverse mode off... and nothing ... ca somebody help me?
I have two TBLE-04S from two different kits and both have the issue that the (brushed) motor slightly moves, when I move the servo. I‘ve used different receivers, different motors and different servos, with and without additional capacitor on the BEC/receiver. It is weird because it shouldn’t pick up any movement from CH1 at all, so maybe it’s some kind of interference? I assumed it was a isolated issue with the one I got, but now I got a second one and it behaves the same. I guess it’s still usable since the movement is minimal, but other ESCs in the same place don’t do it (like the TBLE-02S or Hobbywing 1060 and 1080).
Thank you so much! Earlier I had just finished assembling the Tamiya lunchbox and it wouldn't reverse, now it can because of your video, again thanks a lot!
Just the info I needed! Thanks
I run my tble-02s with 13.5t motor on 3s with fan hop up..No issue at all.
I’m building the Tao8 R does it have brake feature for stopping
Will tamiya eventually accept lipos in all of their aspects of their company?
I'm wondering the same thing. Will this esc have lipo cut off?
@@RC4X4 I'm hearing it won't I just can't believe it's going to take more ability to take amps like up to 75 but it doesn't change the motor as far as I know it's limits are.
@@RC4X4 the description says the new 04s has 2 low voltage battery modes, HI and LO.
I will use the HI as it will save my 2s batteries, cutting it off at 3.1volts per cell. Which is still pretty low
Thank you for this. Does this speed controller handle 8.4 volt batteries?
why my Tamiya buggy reverse is faster than forward>?
Thank you soooo much
Remember to activate your brake setting first before anything else... mine was not enabled and made the setup initially frustrating. You expect these to just work as they come with some kits.
My brakes is not working. How can i activate ? Help me, please.
@thiagohinata there should be a configuration you need to enable.
There's no brake, brake and soft brake (2 clicks before stop) from memory
Thanks, very informative video.
Mine just make beeping sounds after the calibration. the motor isn't running
What if it comes on while the power is off?
How do you turn off high point
This doesn't work for the tble-o4sR
Needed this to clarify what the instructions refer to as "brake" instead of "reverse", when dealing with a brushed motor.
I'm with a problem, where I've set all those steps for my Carson and it simply throttles backward! I've tried to turn reverse mode off... and nothing ... ca somebody help me?
I have two TBLE-04S from two different kits and both have the issue that the (brushed) motor slightly moves, when I move the servo. I‘ve used different receivers, different motors and different servos, with and without additional capacitor on the BEC/receiver. It is weird because it shouldn’t pick up any movement from CH1 at all, so maybe it’s some kind of interference? I assumed it was a isolated issue with the one I got, but now I got a second one and it behaves the same. I guess it’s still usable since the movement is minimal, but other ESCs in the same place don’t do it (like the TBLE-02S or Hobbywing 1060 and 1080).
Does tony phalan. Work with you?
ありがとうございました。
Mine needs a couple of pulls of the trigger before it goes into reverse , very annoying ,anyone know why ?
Battery 2s or 3s?
connact battry auto run..how to fix
Cool
the car isnt going to the red, its just blinking green and red
New esc, same shitty battery plug🙄