How To Build a Tamiya TT02 for ROAD - 10 Low-Cost Hop-Ups, Mods & Tips!

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии •

  • @aviano72
    @aviano72 Год назад +11

    As an TT02 aficionado, owner of 19 TT02's i approve this video 😉😆
    D15 i always say, throw it away, it's useless. Also that motor cover as you say is useless unless u use a fan.
    Great video Mark!

    • @MarkBryanRC
      @MarkBryanRC  Год назад +2

      Many thanks for the approval 🙏 Are! I think you an authority with 19 TT02 's!!! It's a great chassis and even better with a little tweaking! All the best my friend 😎🤝👍

  • @anthonydunstone8398
    @anthonydunstone8398 Год назад +6

    Just bought a tt02 on weekend and this video is nothing less than great to help understand what's doing what and why people are buying all this extra stuff. I'll deffo be putting some of these into action 😊

    • @MarkBryanRC
      @MarkBryanRC  Год назад +2

      Great purchase, Anthony! Have fun with the upgrades, these are great chassis to tinker with! Cheers! 👊👍

  • @CDRaff
    @CDRaff Год назад +3

    Hey Mark. I just wanted to say thanks for all your TT-02 guidance. I had been looking at Tamiya RC kits for a while, but felt too in over my head to actually decide which kit and what I needed to complete it. Your videos helped a lot in getting me comfortable enough to actually pull the trigger on one. I just ordered one and almost all the hop-up parts you suggested to go with it.
    Thanks again.

    • @MarkBryanRC
      @MarkBryanRC  Год назад +2

      Glad I could help! Thanks for the kind comment. Great to know the info was of some use! I hope the new kit and all the hop-ups give you a lot of pleasure. Enjoy! 😎👌👍

  • @sagnhill
    @sagnhill 2 года назад +6

    I love these TT-02 vids you have. Over the past 40 years I been a truck/crawler RC type of guy and only recently getting into the street RCs. I've learned a lot, thanks.

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Thanks for the great comment! Yeah, it's cool to try all the different types of RC, such a great hobby! Cheers! 👍

  • @SeekingTheVerdants
    @SeekingTheVerdants Год назад +2

    Hi Mark, what a great video you've got here. Its perfect for giving first time TT-02 builders like myself ideas for some hop-ups to start with. I actually watched it twice and the second time I typed out each hop-up to ease up ordering the parts. Thanks again.

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      That is very kind of you to say and I really appreciate it. Glad it was helpful though! I keep meaning to list all the hop-up part numbers in the description... anyway, many thanks!

  • @rccrawlersmid-wales645
    @rccrawlersmid-wales645 3 года назад +16

    Mark, that was fantastic. These are always some of my favourite vids of yours - really useful and interesting, and full of great knowledge (so much better than just watching people throw money at them without much how or why). Great stuff, keep it up and hoping you're keeping well! 😎👍

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +2

      Many thanks, Steve! Great to read, I'm happy that you like these build and hop-up vids, even though they aren't crawler related (lucky for me!) But then I love watching your crawler videos, even though they are not Tamiya related - it just shows what a great hobby this is. I'd love to own some of those rigs you have, I think I need to find time in the future to have a go at one of those builds, I can always ask you for help when I inevitably get stuck! Hope you are doing OK, too, I'm alright, thanks! All the best, mate. 😎👍

  • @kam8361
    @kam8361 Год назад +1

    I am starting this as a new hobbies and this video has been a massive help, thank you!

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      Great to hear that the video was useful! Many thanks for taking the time to leave a comment here, much appreciated!

  • @TheMitsosBlog
    @TheMitsosBlog 3 месяца назад +2

    How about TT-02R, don't you think is better start, although it's a little more expensive?

    • @MarkBryanRC
      @MarkBryanRC  3 месяца назад

      That's a good thought but it has the same suspension geometry as the stock TT02 and hence the same limitations. If I were to choose a TT02 variant I'd go with the way cheaper Type-S, the suspension design is way better! Thanks for the comment! :D

  • @michaelmnmnguyen
    @michaelmnmnguyen 2 года назад +3

    Thank you Mark. You are a genius at explaining things to a newbie like me.

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      You are very welcome, Michael! Thank you for the positive feedback, it's really appreciated. I hope you are enjoying the hobby, very best wishes from Mark... :)

  • @CallmeDaBreeze1971
    @CallmeDaBreeze1971 2 месяца назад +1

    The AW grease is a great tip. I used it in my TT-02 and it provides a slight oversteer effect which is a lot of fun.

    • @MarkBryanRC
      @MarkBryanRC  2 месяца назад

      Exactly!!!! Yes the grease tightens those diffs up just enough to kick the rear out - tons of fun! Cheers! 🍻😎👍

  • @joelalcock7603
    @joelalcock7603 3 года назад +1

    Great video - there was no messing around with chopping bits of the car up 👍🏻

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thanks Joel - hehe, yeah, at least with a road-going TT02 you can leave the stock plastics alone as the ride height is OK as it is! All the best from Mark... 👍

  • @WhyNotTry_
    @WhyNotTry_ 6 месяцев назад +1

    Thank you so much! This was my first ever RC Car build and I needed some tips on mods to get and do before I built it. Thank you!

    • @MarkBryanRC
      @MarkBryanRC  6 месяцев назад

      You are very welcome - Glad I could help! Great to hear you are into this great hobby, thanks for the kind comment and have fun with your TT02! 😎👊👍

  • @madsrcbuggy
    @madsrcbuggy 3 года назад +3

    "That's my last tip, for more grip!" Ouyeah, Mark, that was great! That was a really and useful video, lots of knowledge in there, even if I'm not building a road TT-02, still great tips!
    For 3rd party shocks, I'm almost decided I'll try the ones from Yeah Racing, I'll see how they are, would be nice to find a budget option that I can trust are good...
    Have a great weekend there, mate! Was nice seeing your shed in Pete Wylie's video, it was pretty much exactly like I had imagined it would be.

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Hehe, Ouyeah, glad you liked it, Mads! It's always good to watch some nerdy RC content if you are a nerdy RC fan like us! I've heard a lot of good things about those Yeah Racing shocks, good luck with those, I think Rob has a set and loves them. Oh, so pleased that you liked Pete's video, it was great to meet him and drink his beer! That shed is my favourite place, I can get away from it all up these and immerse myself into RC and games, happy days. Enjoy your weekend, too, my mate! 😎👍

  • @CarminesRCTipsandTricks
    @CarminesRCTipsandTricks 3 года назад +3

    I can highly recommend the Yeah Racing Shocks. They come in all sizes from 50mm to 120mm. And as you know, I replace all Shock O-Rings with Team Associated X-Rings. DO NOT Leak!
    FANTASTIC set of Tips my English Brother!! 👍👍🍻
    Filling in the gaps under the Steering has got to be the BEST TT-02 tip ever!!!
    Almost everyone has some Foam like that laying around.... Cutting it into strips is easy, and does improve grip. Another on list of Top Tips in this Video!!
    Something ill definitely share with novices. 😉
    ATB dear Friend. That's going to be a fast Ford!!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Cheers, my American Bro! Yes, those shocks are so much better than the ones I got, but downside is they are a lot more expensive. I think Rob has a set and was mightily impressed.
      Glad an RC veteran like you approves of my list - simple but effective, good advice for an RC novice, I hope! ATB to you and yours! :O)

    • @CarminesRCTipsandTricks
      @CarminesRCTipsandTricks 3 года назад +1

      @@MarkBryanRC
      Your Videos always inform and entertain all skill levels!!
      I'm going to be trying an experiment... I got some Chinese Alumininium Shocks, 4 for $20, and I'm going to find out if the premium seals actually make them any good.
      They arrived in a bag full of OIL, so they've got nowhere to go but UP!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      As ever, you are too kind, Carmine! Oh, I like the sound of your experiment, it might just WORK!!! :D

  • @TheWoodlandhoBo
    @TheWoodlandhoBo 3 года назад +1

    This is great mark.
    Just ordered my first tt 02 to make with my daughter this Christmas. Escort Cassie kit.
    Thank you for you videos 👍🏻

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Hi Tim, thanks very much!
      Great to hear you have a TT02 on order, I'm sure you and your daughter will both love it, you can't beat an Escort Cossie! Thanks for watching and leaving a nice comment - all the best from Mark... 😀

  • @alastairmulholland2581
    @alastairmulholland2581 3 года назад +3

    Your build videos are top class,you go into a lot of detail.Thanks for all the effort you put into these videos.

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Your comment is much appreciated, Alastair! Yes, it takes an awful lot of time and effort to make a video like this, best part of 3 or 4 full days with the editing as well. Thank you so much!

  • @ccrum32
    @ccrum32 3 года назад +2

    I’m gonna get another tub (because I stripped out the screw holes), aluminum steering knuckles, a screw set, a prop shaft, and the steering upgrade set, thanks Mark!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Hello there! Pity you had to shell out for a new tub, those holes are too easy to strip! I like the sound of your upgrades, all the best with them! Cheers!

    • @ccrum32
      @ccrum32 3 года назад +1

      @@MarkBryanRC thanks! You too!

  • @stevemoon2136
    @stevemoon2136 3 года назад +1

    Some very sensible upgrade there. I hole heartily agree with the use of hex hardware, definitely an advantage for anywhere that may need frequent disassembled.

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thanks so much for the positive feedback, Steve! Oh yes, I order those stainless screws in bulk nowadays - works out much cheaper. :O)

  • @robbrennanrc
    @robbrennanrc 3 года назад +2

    Some great tips and well explained reasons for your hop-up choices mate. Lets just hope we get some decent weather soon to get it out for a run.

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thanks Rob! Now we have two TT02 road cars to pit against each other - what challenge shall we do first? Get your thinking cap on, dude! Hope to see you very soon! 👍

  • @yodadarksideGreenHawksRC
    @yodadarksideGreenHawksRC Год назад +3

    Who's here doing their research for the poor boys rc TT02 speed challenge? 😂
    Great video as always Sir! 👌
    👍 👍 👍 👍

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      Thanks James but you won't find too many speed tips here, well not for the speeds we'll need for the challenge! Adjustable tie rods is a must for stability and the high speed gear set so you can change spur gears is good advice though! Thanks for watching, mate!👍

    • @yodadarksideGreenHawksRC
      @yodadarksideGreenHawksRC Год назад +1

      @@MarkBryanRC
      Hit the nail on the head there mate, It was the spur gear info I was trying to research!
      I'm not familiar with the TT02, as I didn't build the one we will be using, and have never owned one..... so was just trying to familiarise myself with the chassis a bit!
      I've just found out from Taylor that it hasn't even got bearings installed.... 🙄😬...... So that needs to be addressed first and foremost!
      I did drive moo moos a few times, and to be brutally honest-
      I was not impressed with it in stock form, but am fully aware they can be made to be great performers..... which makes it an ideal platform for this challenge eh mate?
      Currently rained off from work again.... what a grim summer! ☔
      👍 👍 👍 👍

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      @@yodadarksideGreenHawksRC Yeah the car is a bit pants in stock form! Keeping it in a straight line is gonna be key. Also keeping it on the ground, they tend to get light at high speeds. Needs a wing or two! But yeah it's a great starting point. Too bad about the weather, it's pissing it down here too! Take care, mate!

  • @petergoodwin2465
    @petergoodwin2465 3 года назад +1

    Always well explained and very useful. Thanks Mark , great video again.

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thanks again, Peter! I really appreciate that, as I did try hard to cover all the main points with some kind of explanation behind my thinking. All the best, mate! :O)

  • @hyne1972
    @hyne1972 Год назад +1

    Like the way you explain things in layman’s terms, getting back into RC and just got a tt02 155 Alfa

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Many thanks, I explain things simply because that's how I think! 🤣 But seriously, much appreciated and welcome back to the hobby, the TT02 155 Alfa is a great choice - enjoy! 😎👌👍

  • @HaydadRC
    @HaydadRC 3 года назад +1

    Top tips as always Mark! In an easy to understand format! Well done my friend!
    👍😊

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Thanks a ton, Jeremy, always a pleasure, my friend - have a great weekend! 👍😎

  • @KaniZRC
    @KaniZRC 3 года назад +3

    I just ordered one of this tt-02 kit (my first tamiya NSX). Will be making custom titanium one piece center drive shaft for mod 1 etc.... great video👍

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Great to hear you got one coming! That titanium mod sounds superb, super strong and super light! Thanks for the kind words, all the best! 😎👍

  • @rexrcs
    @rexrcs 3 года назад +4

    Great tips for starters!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +2

      Glad you think so, Rex! Sometimes the simple little mods are the most useful - cheers, Brother 👍

  • @UncleBobsRC
    @UncleBobsRC 3 года назад +1

    Great build & tips my brother!!!! Like the little bend in the antenna tube also, a thing I do a lot. Helps it from rubbing on the paint & you don't need a hole in the great looking body!!!! What more can I say, AWESOME job Mark!!!!!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Hiya Bob! Appreciated my friend, I know you already know most of these tricks, but the video isn't for you RC veterans! Hehe, you saw the bend? Eagle eyed as ever, my brother from another mother!!! :P

  • @777700777700
    @777700777700 Год назад +1

    Very nice video good information and well presented 👍

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Thanks a lot for the kind feedback, much appreciated! Cheers! 😁👌👍

  • @hendrahendra
    @hendrahendra 3 года назад +1

    Mark 1 thing to add is to change the pinion to steel. Awesome vid, and that Ford GT looks just the business.

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Good point, my friend, totally agree! I ran out of time to fit all the mods in the video, but that should have been included! Have a lovely weekend. 👍

  • @louiscastero6566
    @louiscastero6566 9 месяцев назад +1

    Indeed a great low cost Hop up accessories mod tips video (enjoy watching)... thanks buddy, you're simply awesome~

    • @MarkBryanRC
      @MarkBryanRC  9 месяцев назад

      Glad you enjoyed it Louis! This is a great chassis to work on and has a lot of potential, I've had a lot of fun with mine. Thanks for the great comment, buddy! 😎🙏👍

  • @kennyH20
    @kennyH20 3 года назад +1

    Great build Mark. Thank you for sharing as always

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Very welcome, Ken! And thank YOU for watching and commenting, it means a lot! 👍

  • @Tom-vo5uj
    @Tom-vo5uj Месяц назад +1

    nice video thanks, ive applied thoses tips to my TT 02

    • @MarkBryanRC
      @MarkBryanRC  Месяц назад

      Great to hear! Thanks for letting me know and I hope your TT02 runs well! 😎👍

  • @wayneyates700
    @wayneyates700 Год назад +1

    Cheers for the tips I just built 1 and wondered why the steering was so abysmal. I will be removing that design flaw 1st thing. I also think it needs shimming ( the arms) as loads of slop.👍👍

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      Cheers, Wayne! Glad you found the tips useful. Oh yes, the steering does need improving, the adjustable steering arms make a big difference and a bit of shimming also helps! Good luck with it! 😎👌👍

  • @BasBoyRC
    @BasBoyRC 3 года назад +1

    Nice simple and affordable upgrades.

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Yes indeed! Thanks, Mal! 👍

  • @craigroberts8105
    @craigroberts8105 3 года назад +1

    Great mods tips for the tt02 excellent job mate 👍👍

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thanks very much, Craig - have a great weekend! 👍😎

  • @isaiahfurrow7414
    @isaiahfurrow7414 2 года назад +1

    Awesome video. We have a new paved knroad track coming near me, so I am looking to TRY onroad out....we race offroad and play with other RCs, but no onroad experience.
    I am thinking we will try a start with a TT02D kit, as we will be adding the spec tires the track sells... the D kit comes with bearings, CVA dampers, etc...and a body we like.... might get 2, or get a second chassis kit without body, and add a body to it...
    Do you think this is a reasonable choice for a starter onroad car build, vs adding all the ae upgrades to a normal TT02 kit?
    One other chassis were looking into as a cheap starter car is the fazer mk2 from Kyosho...
    Hoping to be able to get some others to jump into a cheap onroad class where we aren't racing the super expensive carbon chassis belt drive cars ...

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Hi Isaiah, great to meet you!
      Yes I totally agree that it makes sense to go for the TT02D, I also use mine with road tyres - it goes well and another advantage is that it comes with the Sport Tuned motor!
      That cheap racing on a road track sounds fantastic. I've seen others run clubs with a "stock" TT02 class and the racing is close and exciting, you really don't need an expensive carbon chassis to have fun. I'm sure you will have a great time! All the best from Mark...

  • @seant4369
    @seant4369 3 года назад +1

    Always great your videos informative and fun. Hope you are well Mark!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thanks, you too, Sean - have a great weekend! 👍😎

  • @mike._.feliciano6782
    @mike._.feliciano6782 Год назад +1

    HI Mark, thank you for the videos, they are helpful. On the glue in the trays of the front of the chassis, how much weight is that adding to your chassis? It's a great idea and I understand why you do it.

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      Hi Mike and thanks for the kind comment! Glad you find the videos of some help. As for the weight, I used about half a glue stick. The whole stick is only a few grams so I would say the weight added is negligible, I certainly can't tell any difference when driving! All the best from Mark...

  • @JustKeepLivingFPV
    @JustKeepLivingFPV Год назад +1

    Thank you for the video. I'm about to build my first tt02. And I'm doing my due diligence.

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Hi Kyle, well you chose a great chassis to have a go at. Good luck! 🤞👍

  • @mikebolt9753
    @mikebolt9753 Год назад +1

    Excellent well put together video. Thanks for posting

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      Thank you very much, Mike! Appreciated, thanks for watching!

  • @Itsallfun3000
    @Itsallfun3000 Год назад +2

    Nice video, nice tips and nice style. Thank you for making this. I picked up a tt02 this week. Having not touched rc since I was a kid in the 90s I always wanted a cossie so now I shall have one and maybe I'll race at some point. It's so nice and easy and affordable after racing things I can fit in ❤ and a bonus I get all those fun feelings I had as a kid it's all still there. Funnily enough I used to go to Phil greeno in Rayners Lane. He told us he was world champ I never believed him and now we have wikipedia he was the real deal haha!

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      Thanks Chris! Oh yeah, I got a Cossie Tiger Stripe on my TA02 chassis, but the body will fit straight on my TT02! The TT02 is a great chassis that you can endlessly modify and upgrade, should you want to! I agree, the fun and feelings of this hobby never go away. Never heard of Phil Greeno, but yeah I see he still has a shop going! Cheers! 😎👍

  • @ahmoyyoon4677
    @ahmoyyoon4677 3 месяца назад +1

    Thank you. Now i know how to upgrade my tt02

    • @MarkBryanRC
      @MarkBryanRC  3 месяца назад

      Glad I could help! Have fun with your TT02, it's a superb chassis!

  • @scaleworksRC
    @scaleworksRC Год назад +1

    Well, this is some good info. I need that propeller shaft upgrade probably before my first run. I have a 5900kv brushless, 27T, 3S setup waiting to transfer over and it's already pushing 56mph. I actually have the shocks waiting for this chassis as they won't fit on the current rig. Thanks for sharing your knowledge!

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      Thank you! Oh yes, with that setup I think the alloy prop is a must! That's some speed for one of these chassis! Thanks for watching! 🙏😎👍

    • @scaleworksRC
      @scaleworksRC Год назад +1

      @@MarkBryanRC Can't wait to see what she'll do!

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      @@scaleworksRC Fingers crossed! 🤞🤞👍👍

    • @scaleworksRC
      @scaleworksRC Год назад +1

      Well, after final assembly and testing, I ran into a few issues. 1. Had to order another turnbuckle set as the ball joint snapped off when I was putting it in. I should have known better and opened up the hole with the stock screw or a drill bit first. Ended up using one of the arms for the servo arm so it came to some use. The stock screw backed out within 3mins of running. 2. The car does not want to drive straight above 40mph or so. I found a fix for the slop in the uprights. Cut a small bit of spring off a pen x4 and put them between the drive cups and the dog bones. Voila. No more slop. Still need to road test but it's a vast difference from stock. Cheers!

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      @@scaleworksRC Well I'm glad to hear it's mainly good news! Oh yeah, I had one of those ball ends snap, you only do it once!!! The TT02 isn't known for it's stability at high speed, I found the Yeah Racing 2.5 degree toe-in alloy rear uprights help a little though. I like your slop cure! All the best, cheers!

  • @vivos71
    @vivos71 Год назад +1

    Have any input on what the longevity/wear of using the aluminum prop with the plastic drive cups?

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      Yep, this chassis has had a lot of use and there is no real wear visible on the plastic cups. I think they actually give the alloy prop ends an easier time than the metal cups! ;)

    • @vivos71
      @vivos71 Год назад +1

      @@MarkBryanRC awesome, i was hoping that because it’s not a metal to metal joint that it would be smoother driving as well

  • @GastonMaqueda
    @GastonMaqueda 3 года назад +1

    Great video Mark. Like always

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thanks a ton, Gaston, appreciated like always! 👍

  • @jesseortega8598
    @jesseortega8598 Год назад +1

    Awesome. I have the TT- 02. 92 Audi V8 version. I'll be Ordering those hop up parts. Thank you Mark.

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Thanks! Glad to be of some help. That's a great version of the TT02, should look amazing when done! Enjoy! 😎👍

  • @coisnotpog
    @coisnotpog 2 года назад +2

    Amazing vid. I have a tt02 on the way. It will actually be my first hobby RC car! I ordered most of these mods from recommendations already, but you are the first i have seen mention the turnbuckle kit. I just placed an order for that as well as Amazon can get it to be before my actual Tamiya kit arrives lol. It is absolutly wild how much stuff there is out there for these TT02 chassis. Hopefully this little GR86 Toyota comes out even half as nice as your Ford GT!

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Hi and many thanks for the great comment. Oh yes I'm glad you have one of these great cars on the way, and even better that you ordered hop ups too! As you say there's so much available out there. Have fun with your Toyota when it's finished! 🙂👍

  • @TonysRcTechboom
    @TonysRcTechboom 3 года назад +1

    Awesome Build Mark , she is a beautiful piece of Kit 😍 definitely need Foam in the tyres 👍 great video once again brother 👍 sorry for the late watch, been busy as a bee 🐝 😀 ill watch your other vid now 👍 have a wonderful night brother 👍😍😎👍

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Hello matey! Hope you are doing well. Thanks for your lovely comments - and thanks for taking the time out of your busy schedule to check my videos out, always appreciated, bro. Have a smashing weekend. 😎👍

  • @0megaming
    @0megaming 2 года назад +1

    I tried it myself on my subie and got like a full centimeter more clearance out of it ^^ Nice, now, I go rallying even harder XD

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      Nice work! I'm really pleased to hear that the modifications worked for your car. Have fun, rally hard! :O)

    • @0megaming
      @0megaming 2 года назад

      Thanks 😁👍 In also made wheel housings out of plastic cups and powerful duct tape, painted it like the inside of my car (outside it's midnightblue with sparkle in the sun and black in the inside, also the 3 back windows are blacked). I just habe to wait till tuesday, bc one of the bones, that transfer the movement to the wheels, got lost and I'm waiting for the spare parts xD But when they're there, I'll be hard to that car, when it's fixed xD Saturday, I'm gonna hit auf basher track with it (second time there and even without the raising, it was more fun for me, than the people from the local RC club expected me to have, when they saw me putting it in the pit lane for the first time xD sorry for that wall of text, I got exited x3) btw, I got the Subaru Impreza Monte Carlo '99 on the TT02 chassis 😎

  • @khevolution
    @khevolution 3 года назад +1

    Hope you see this message, but during the build i noticed that you have not routed the receiver aerial where the instructions advise you to, could you tell me how you have mounted yours?

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Hi - no problem! Yes, I mounted the aerial so that it's easier for me to change the receiver, as I swap them between my RC's. I just mounted the aerial holder (D12) by putting the screw into the hole on top of one of the servo mounts (A12). Hope this helps!

    • @khevolution
      @khevolution 3 года назад +1

      @@MarkBryanRC That helps alot, not sure how i didnt think of it, Thank you!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      @@khevolution No problem, you are always welcome here!

  • @crashoverride6413
    @crashoverride6413 Год назад +1

    that video was really intresting, 'cause i'm looking for "tips" how i can "mod" my TT-02 directly from the beginning. just saying, i'll even have a look at the "rally mod", 'cause that's what i've had in mind - but these tips here are also really helpful, especially the point where you "filled up" a part of the chassis with hot glue (that will surely being helpful for "outdoor use" for a rally-car). I even like the assumtion on "why" you do the mods - 'cause it explains how it can be better with these.

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Many thanks for the great feedback! Glad you found the explanations useful, I hoped it would add to the value of the video! Oh yeah, that hot glue trick really works and definitely helps a rally car on this chassis. Best wishes from Mark...

  • @MaxeeOffroadRC
    @MaxeeOffroadRC 3 года назад +1

    Excellent⭐️👍Nice Video my friends 🤜🤛

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thank you! Cheers, Maxee! 😎👍

  • @gazking08mx
    @gazking08mx 3 года назад +1

    Good tips. Great video

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Glad you think so! All the best!

  • @likzen8876
    @likzen8876 3 года назад +1

    cant wait for the speed run test

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thanks - yes, I think it will be interesting to see how well this motor goes! Cheers!

  • @simonbodill
    @simonbodill Год назад +1

    I’m building one of these at the moment I’m glad I saw this video saved myself some time and money 😀👍🏼

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Hi Simon! Great to hear the video was useful! Hope it goes well for you, cheers! 😁✌👍

    • @simonbodill
      @simonbodill Год назад +1

      @@MarkBryanRC I think I will be using my glue gun on the chassis and I’ve ordered the turnbuckle set too oh and that bit of useless plastic is gone 😂 all the other parts are on their way and my yeah racing shocks I made up today 😀 so your video was extremely helpful 👍🏼👍🏼👍🏼

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      @@simonbodill Oh yes you will be glad you used your glue gun, it really does jam up otherwise! Sounds like you are well on top of this build, thanks again for the kind words! 😁😁👌👌👍👍

  • @theneohobbyist
    @theneohobbyist 3 года назад +1

    Great video as always! The one surprising thing about the TT-02 road configuration is how incredibly dirty the chassis gets after a single run, even on clean tarmac. The body works like a vacuum cleaner bag and absolutely every bit of dust and road clag gets kicked up inside. Blows off easy with an air line but they always come away dirtier than a buggy after a run!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Thanks very much! Couldn't agree more about the muck that gets into a run with a road run, it always amazes me! That's why I glue-up the webbing, even on my road cars. I use a Dyson on full power to vac mine after a run! Works a treat. Take care, my friend! 😎👍

  • @grahammcdonald6011
    @grahammcdonald6011 3 года назад

    What a great video, one of the most useful I’ve watched in a while - simple explanation and useful tips. Thank you Mark!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Many thanks for the kind words, Graham! It means a lot because I put a lot of effort into this video - I'm happy that you approve! Cheers!

  • @SpeccyMan
    @SpeccyMan 3 года назад +3

    Perfect timing. I've been assembling a collection of extras for my upcoming TT-02B build. I've already bought the bearings (no brainer really) and the turnbuckle kit for this chassis along with the aluminium prop shaft and end cups. Been thinking of the cheaper Fastrax steering upgrade kit and now I can add to that the motor you've suggested (might get another one to put in my Grasshopper II build too) and the spur gear set as well. I'm not going to be going mad on bling for my TT-02B build but I do want to be doing the essential upgrades. Some great tips in your video. 👍

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Hi, Nick - I must have a crystal ball - super timing indeed! Definitely no need to go mad, it's a good chassis as it is, with a few little flaws that can be easily addressed. I think you have all the major points covered! All the best, my friend! 😎👍

  • @hhaaaaaannnnndddlllleee
    @hhaaaaaannnnndddlllleee 2 года назад +1

    This was wonderful. Thank you!

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Glad you enjoyed it! Thank you for the great comment! :)

  • @crutlefish6592
    @crutlefish6592 3 года назад +1

    Great video and timely - just got two TT-02 kits, one to bash, and one to trick out to the max. I'll be doing the chassis glue and the stainless steel bolts for sure, as well as the fantastic elastic wheel glue trick! Thanks.

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Hi Chris - many thanks for the comment. Oh yes, 2 kits are better than one! I like your thinking. Good to hear you will be using some of the mods. I wish you well with your builds, all the best from Mark. 😎👍

  • @col72
    @col72 2 года назад +1

    Great video,to adjust the steering do the turnbuckle tie rods need to come off or do you just turn the nut? ,cheers

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      Thanks! Oh, you only need to turn the nut, the rods stay in place for adjustment, plus you get the spanner with the hop-up kit! Cheers.

    • @col72
      @col72 2 года назад +1

      @@MarkBryanRC bugger ,I tried to pop them out and it snapped ,I've sorted it now like 👍

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      @@col72 Oh no! Good to hear you got it sorted, though! 👍

  • @SlushyVeX
    @SlushyVeX 2 года назад +1

    hey man awesome tip video i ordered the speed gear and the tamiya speed motor off this video to upgrade my tto2 unfortunartly i live in the us so everywere is out of stock of the eco21 haha i had a quistion tho i have a pretty big more crawler suted servo in mine currently and it kind of twists the chasy do you mind telling me what server youve got for yours? or a good cheap one for the tto2? thanks!

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Cool and thanks for the comment and question! Ahh, you can turn down the steering on your radio system to stop the servo turning too far and bending the chassis. If you want to change it for a cheaper servo, I recommend the RADIENT RS-BS201-PG 5KG servo! Take care! 👍

  • @franklinmint7394
    @franklinmint7394 Год назад +1

    Thanks for this great video and awesome tips Mark, please keep these break down type and build explain videos coming 😀 there very very helpful and greatly appreciated

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      And thank you for the great comment and feedback! Much appreciated here! I'll try my best to keep the content coming. All the best from Mark... :)

  • @chrisprud7688
    @chrisprud7688 5 месяцев назад +1

    Love you’re videos mark I’m looking at getting a tt-02
    Mark I’ve got a 10.5 turn fusion exceed brushless motor what size pinion is best to use with it

    • @MarkBryanRC
      @MarkBryanRC  4 месяца назад +1

      Cool, thanks Chris! As for the pinion, it depends on the KV of your motor and how fast you want the car to be. I've seen TT02's hit over 100mph! I'd try it with the stock pinion and take it from there! Cheers!

    • @chrisprud7688
      @chrisprud7688 4 месяца назад +1

      @@MarkBryanRC thanks mark it’s making like a slipping screeching sound where the pinion is mint connecting to the spur
      Nightmare lol I’m currently using a tt-01

    • @MarkBryanRC
      @MarkBryanRC  4 месяца назад +1

      Oh no, that definitely doesn't sound right! I've never had that with my TT02. Time for a strip down and inspection! Good luck!

  • @ramezgoussous3303
    @ramezgoussous3303 2 года назад

    Very informative and useful. Thanks for sharing.

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      So nice of you to say, Ramez, much appreciated and thank you very much for watching! :)

  • @uncletom1971
    @uncletom1971 Год назад +1

    Great video there, thanks Mark. But that high speed spur gear, I'm puzzled, how fast are you planning to run this car?

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      Thanks, Tomas! Ahh, yes, the reason for the high speed spur gear is to give more options for the gearing. You can use many more pinion sizes and 2 teeth more than stock. I may use the car for speed runs in the future.

  • @RCPMK
    @RCPMK 2 года назад +1

    Very nice. My local hobby store has a TT02R in stock I'm thinking about for a scale project. Looks like it already some of the mods you have done

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      Cool, thanks! The TT02R has so many hop-ups in addition to the stock TT02, it sure would be a better place to start a scale project than the stock chassis and SO MUCH cheaper than buying the hop-ups separately! Good choice! :)

    • @RCPMK
      @RCPMK 2 года назад +1

      @@MarkBryanRC It will be my first Tamiya!

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      @@RCPMK Well, it's a great way to start with Tamiya!!! :)

  • @yellomello71
    @yellomello71 2 года назад +1

    Hi, after building a few classic buggies I now want to make a few touring cars. I am currently working on the Porsche 911 RSR with the TT-02 chassis and the Ford Capri with the TT-01E Cassis (built from parts). Your video will really help me a lot. Thank you and thumbs up

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Hi there! Many thanks for the thumbs up! Cool, the 911 RSR and Ford Capri are great choices, I like your taste! Have fun with those. I'm glad the video was of some help, really great to hear. Best wishes from Mark...

  • @col72
    @col72 2 года назад +1

    Good tips mark I've followed a few where do you get you're foam from?

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Thanks, Col - oh, the foam is for putting under wooden floors (it has a self-adhesive layer) I think it was from B&Q!!!

    • @col72
      @col72 2 года назад +1

      @@MarkBryanRC OK ill have to get some cheers

  • @andrewsouthern3517
    @andrewsouthern3517 3 года назад +1

    I’m building a tt02 1998 escort as a rally car, I currently have oil Shocks on it, are there any other items that I can put on my car to make it perform better on loose gravel

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Hi Andrew, have you seen my video where I modify the suspension for rally running? Just in case you haven't, here is a link:
      ruclips.net/video/60zIwIzAd64/видео.html
      Cheers!

  • @NordicRC
    @NordicRC 3 года назад +3

    Very well made video and instructions! Fantastic, Mark. Great cheap mods. A little detail: wonder why the pinion wasn’t changed to a cheap steel one? The stock looked shiny and aluminium’ish. Anyways, I am very happy with the video and enjoyed watching it. Big thumbs up. Will be a very handy video for anyone building a TT-02 (or like me, just love watching some nerdy stuff concerning the entry-level Tamiya models 😀).

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +2

      Goddag, Mikael, many thanks for watching this rather long video, I hope you had a drink in your hand whilst watching! Yes, strange how Tamiya works, as usual - the TT02B gets a steel pinion, so why put an alloy one in the road car kit?!?!?! Doesn't make sense. I will look for a cheap steel pinion when I'm sure about the gearing on this car. So glad you liked the nerdy stuff in the video, it was fun to make both the kit and the video, nerdy heaven for me! Take care, my mate. 😎👍

  • @rcrelatedstuff6092
    @rcrelatedstuff6092 Год назад +1

    Another great video. Just a question in regards to the high speed gear set. What is the advantage of buying this instead of just adding a few teeth to the pinion and keeping the stock spur gear?

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Thank you! To answer your question, the high speed gear set allows for more gearing options and ultimately higher gearing than possible with the stock spur gear. The maximum sized pinion is raised to 27T as opposed to the 25T, combine the bigger pinion with the smaller spur and the gear ratios are increased. Cheers!

    • @rcrelatedstuff6092
      @rcrelatedstuff6092 Год назад +1

      @@MarkBryanRC Great, many thanks for the prompt reply! Have a nice weekend!

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      My pleasure! Have a great weekend, too!

  • @lequsejones5384
    @lequsejones5384 5 месяцев назад +1

    Hi, I've bought this replacement prop shaft for my (son's) FIREDRAGON trying to get it to fit...any suggestions?...

    • @MarkBryanRC
      @MarkBryanRC  5 месяцев назад

      Hi there - if you have the TT02 prop shaft I don't think it can be made to fit unless you have access to a lathe to re-machine the prop! Good luck with it!

    • @lequsejones5384
      @lequsejones5384 5 месяцев назад +1

      @@MarkBryanRC Thanks. I wasn't expecting a response so soon seeing as your video is years old. I'm going to return the part. Do you know of a part that will fit without modification? I had a fire dragon as a kid and this is the part that failed!

    • @MarkBryanRC
      @MarkBryanRC  5 месяцев назад

      @@lequsejones5384 No worries! I do keep a check on my comment notifications! Tamiya don't make a hop up for the prop shaft but it might be worth doing a search on eBay because there may be a hop up from Yeah Racing or another brand. Fingers crossed 🤞 and all the best 👍

  • @cmoneyg60
    @cmoneyg60 2 года назад +1

    Can you link the hex screws? Starting my build soon and want to use them as well. If not a link, maybe just the specs?

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Hi. I used M3 button head stainless screws, mainly 10mm and 12mm long, they are cheaper the more you buy, I usually order 50 or 100 of each length. It works out at less than £3 for 50, including free postage! Here is a link, you can select the length and number of screws:
      www.ebay.co.uk/itm/181024489629?var=480201565806&hash=item2a25e6809d:g:cf4AAOSwj6lbvJDw

    • @cmoneyg60
      @cmoneyg60 2 года назад +1

      Thanks!!!

  • @rbaldino
    @rbaldino Год назад +1

    Hey Mark, great video. I have a question about the adjustable steering linkage. The silver ball end doesn't want to screw into the steering knuckle on my car. It's a very tight fit. Since that hop-up is technically for the TT-01, does it not quite fit right, or am I doing something wrong? Thanks for any help you can provide.

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      Hi there and thanks! Oh yes, I should have mentioned in the video, those silver ball end threads are very tight and can snap if you put too much torque on them. If you can open the hole in the plastic a little or tap a thread it will help, failing that a little grease on the thread always helps! 😎👍

    • @rbaldino
      @rbaldino Год назад +1

      @@MarkBryanRC Good tip. Thanks!

  • @ebandcamp
    @ebandcamp 3 месяца назад +1

    Funny yesterday I watched an on road race here on Long Island NY . Decided I was gonna get back into racing . People told me to get the TT02 . Looked up Amain hobbies and I was curious to see if they had a GT 40 bodied one . Seen that one and I’m sold . Now I need some money . Got any ? Ha
    Thanks

    • @MarkBryanRC
      @MarkBryanRC  3 месяца назад

      That Ford GT MkII body is awesome but very difficult to get the decals onto! It's a great kit to build though. Sorry, I'm a pensioner and looking for money, too! Got any spare?!?!?
      Cheers! :D

  • @PeteWylieRC
    @PeteWylieRC 3 года назад +2

    Hiya matey. Wow you packed so many top tips into that video that I'm going to need to watch it all again! I'd forgotten about that bit that restricts the steering. Also I'd never thought about the fact that you could attach a fan to that plastic motor cover part. Mine has got the heat sink like yours. Shame you had to fettle those shocks to get them working. The Tamiya ones are good but not cheap. You are going to need to find somewhere nice and flat to race that one. Definitely a TT-02 race with Rob on the cards. Anyway as previously mentioned I have a container of Bonzo Tropical on the go which is very nice. I've done my back in which is a bit annoying so not sure what I'll be up to at the weekend. Got a theatre show tomorrow 'Magic Goes Wrong' which should be fun. Was it half term this week? Hope you had a good one. Best wishes mate 😁

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Hello mate! Thanks, I did try to squeeze a few in, phnarr!!! I think I was talking too fast, trying to get everything covered! Yeah, not sure where I can run this one really, the park is a bit restrictive, plus all the passers by keep getting in the way. Also, we need some decent weather, hard to come by this tome of year. Anyway, deffo be cool to do a race off or two with you in the future, a buggy race would be good if I can find one of mine that is anywhere near as fast as yours!!! Yes, half term was a great break for me, hope you are having a good weekend, best to you as always. 😎👍

  • @ducky1774
    @ducky1774 2 года назад +1

    Do you know any alternatives to the Tamiya AW grease? I can't find one available in my country (Sweden)

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      Hi, Sorry but I don't know of an alternative grease. The only thing I can think of is branded as "Copaslip" here in the UK, it's used for as an anti-seize grease and brake cylinders and the back of brake pads. This is generally available. Cheers!

    • @ducky1774
      @ducky1774 2 года назад +1

      @@MarkBryanRC Ok. Thank you for the help!

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      @@ducky1774 Any time! :)

  • @schuttrostig5729
    @schuttrostig5729 2 года назад +1

    These are some really nice and usefull upgrades. I noticed that you did not lube diff ring/bevel and spur/pinion gear, how is your experience there? i thought that the same type plastic bevel/spur gears would need some grease, i know a lot of people run pinion/spur without, but in this case its completly sealed. Also i have 3 more tips: I would use the low friction steering balls, tamiya 300054559. Cheap and much better than the plastic ones. When putting the M3 screws in the plastic i tap the holes with a thread cutter, after that the M3 screws hold better as long as you stay in the precut threads. The kit included pinion gear is verry soft alloy which eats away itself and the spur gear, so i usually replace it with a steel one no matter if i want the provided teeth count or not.

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Hi Schutt! Many thanks for the great comment and even more tips! Much appreciated! Oh, I'm sorry, I didn't show assembling those gears, but yes, I did apply a liberal coating of ceramic grease! Those low friction balls make a lot of sense, I will have to get some! I have tried tapping the holes before, but find the screws I use tap in OK, creating their own threads without pre-tapping. But good practice to tap them, also. I totally agree with the need to use a steel pinion, always a good option to prolong gear life. Many thanks again my friend, take care and all the best from Mark...

  • @OscarOliu
    @OscarOliu 11 месяцев назад +1

    I know this is old, but personally when I buy a new TT02, I always buy the metal shaft, the steering from YeahRacing and the diffs from a DF01, just to have metal internals! I did find that simply buying the TT02D or TT02R is overall a HUGE increase in benefits for only a slight increase in cost. I plan to buy a TT02 SRX soon, as it's only $255 here. and it's chock full of upgrades!

    • @MarkBryanRC
      @MarkBryanRC  11 месяцев назад

      Many thanks for the input, Oscar, good info there! 👍 The type S is the TT02 kit of my choice as is excellent value for money at about $150 here! And it has xv-01 type suspension 😎👌👍

  • @mikebolt9753
    @mikebolt9753 Год назад +1

    What would you say is the better car, the TT02 with all the upgrades you have performed in the video or the XV01 as stock? And what in your pro opinion offers best value for money? Many thanks. Im new to the rc world and am trying to figure out the best path forward. Its been 20 years since I built them as a kid. Must be feeling nostalgic lol!

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Hi there Mike. In my humble opinion the XV01 is still the better chassis because it's a better design, even after modding the TT02 it just doesn't drive as naturally. I'd definitely go with the XV01 if you can afford the initial outlay, you'd end up spending the same on a TT02 in the end anyway. Nothing wrong with a bit of nostalgia, pal!

    • @mikebolt9753
      @mikebolt9753 Год назад +1

      Ok decision made. I will go with the xv01. I appreciate the advice and thank you for taking the time to comment. You have a great channel by the way. I have binge watched a bunch of your videos now lol!@@MarkBryanRC

    • @MarkBryanRC
      @MarkBryanRC  Год назад +1

      @@mikebolt9753 Nice one Mike, you won't regret that choice! You are always welcome and I appreciate you watching my videos! Cheers!

  • @faethonas9000
    @faethonas9000 2 года назад +1

    Great feedback, thanks 👍

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      Glad it was helpful! Thanks for watching and leaving a nice comment! :))

    • @faethonas9000
      @faethonas9000 2 года назад +1

      @@MarkBryanRC I bought my first ever Tamiya RC car today, and you are a great help...its a tt02 Mustang...will follow your advise for upgrades......

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      @@faethonas9000 Great to hear you got the TT02 mustang, it's a great kit! Best wishes from Mark...

  • @JF-RC
    @JF-RC 3 года назад +3

    Hi Mark, I’m over here now! Great video of the TT02 chassis modifications. You’re spot on with those essential hop ups! I particularly liked the servo arm, from the servo to the bridge piece, making that from a M3 thread of a long screw, butting the head off, then attaching ball ends etc… great cheap and cheerful tip there, great to get that servo in the central position. I’ve learn something new today, makes me a happy man! 😊😉😁. I’ve used Yeah Racing arms and Yeah Racing shocks on my TT02 Audi, they seem to be really good and as always bearings 😊. Nice idea about the AW grease in the differentials, creating that limited slip 😉😊. Well, that was a master class in TT02, well done. I had a laugh at Pete’s encounter video😁😉😊, take care, keep well and all the best to you and the family!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Hello my friend! Glad you agree about my hop-up suggestions, thanks so much. Yes, I really enjoy making mods from bits and pieces lying around in my spares box, it's how we all used to fix up our Tamiyas in the olden days! I hear great things about those Yeah Racing shocks, must try some soon. Glad you like Pete's video, it was awesome to finally meet up and share a beer and RC banter! Best to you and yours, John! 😎👍

  • @websitesthatneedanem
    @websitesthatneedanem 2 года назад +1

    Hi Mark, What TT-02 full kit would you recommend for, (an adult), starter?

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Hi there! To be honest, all TT02 kits are pretty similar to build. If you haven't done a Lexan body before, I'd stick to a kit with minimal stickers (decals) as they can be very tricky! Any TT02 road car replica like the Mitsubishi Evo or Subaru BRZ would be easier!

  • @micsherwood4930
    @micsherwood4930 5 месяцев назад +1

    what would be a good brushless system for this chassis?

    • @MarkBryanRC
      @MarkBryanRC  5 месяцев назад +2

      Hi! I have used a 13.5 turn sensored brushless system (hobbyking do a great combo) and it's a good mix of power and controllability!

  • @rexrcs
    @rexrcs 3 года назад +1

    Just showing a friend your video and noticed something I didnt last time “you can feel it, its quite tight” lol

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Haha! I just have a way with words that elude me most of the time, Rex! :D

  • @JoelRodriguez-xn2lh
    @JoelRodriguez-xn2lh 2 года назад +1

    Is there a list of all the parts you got to mod this build? Or a link?

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Sorry but I don't have links but I do explain and demonstrate the parts clearly in the video.

  • @col72
    @col72 2 года назад +1

    Great video mark,does the servo link you made just push on like the other 2 on the steering, or is it screwed in?

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Thanks, Col! The ball ends I used are fixed together so I needed to screw them on. A bit of a faff but at least they got more chance of staying put! Cheers! :)

    • @col72
      @col72 2 года назад +1

      @@MarkBryanRC OK cheers

  • @gadsrc
    @gadsrc 3 года назад +3

    Great tips as usual, specially for the steering - driving on gravel with tt02 is troublesome.
    For tires - if going for speed I think it worth gluing them so they won't slide on the rim..

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Thanks, yep, driving on gravel is a nightmare with a stock TT02! Yeah, I agree, those tyres need a bit of glue, especially with a more powerful motor. All the best from Mark...

  • @nothingspecial.7071
    @nothingspecial.7071 Год назад +1

    I’m looking to get my first rc kit and was looking at this one for drifting, is a gyro separate from the esc or are they one thing?

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Hi there! Yes, the TT02D version of this TT02 is a good way to start drifting. I haven't got a gyro but I think the gyro is usually built into the radio receiver or is separate. I know some DumboRC radios have built in gyros. Hope this helps! :)

  • @gumboniggums3784
    @gumboniggums3784 3 года назад +1

    Great video, what size servo is that i might have missed it.

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thanks very much! It's just a standard size Carson Reflex Racing Servo. All the best! :-)

  • @11Gunnie
    @11Gunnie 3 года назад +1

    Thx Mark really helpt me a Lot!!!
    Keep them comming 👍🏻

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thank you so much, Frederik! That is so good to hear! I'll do my best, Cheers! 😊👍

  • @Rev792
    @Rev792 8 месяцев назад +1

    The thrust motor you recommend, would you put that in a rally car?

    • @MarkBryanRC
      @MarkBryanRC  8 месяцев назад

      Definitely! I have used that motor in a rally car and it's great 👍

    • @Rev792
      @Rev792 8 месяцев назад +1

      @@MarkBryanRC would love to see a video of a speed test that be awesome

    • @MarkBryanRC
      @MarkBryanRC  8 месяцев назад

      @@Rev792 Here is a speed test of an Absima Thrust Eco 18T in a rally car:
      ruclips.net/video/2VYcYJ6cbWg/видео.html

  • @winnithedevil
    @winnithedevil Год назад +1

    Hello Mark! I have 2 questions: Do you take a different engine pinion for the engine update? I think your tip with the tire inserts is great, unfortunately I didn’t understand what (which) material you use there??
    (You can also buy tire inserts!)
    Is this pop up installed?: Reinforced servo saver
    TAMIYA 54799

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Hi there! No, I used the standard 22T pinion but have since tried 26, 27 and 29T pinions, I got 45mph with a 10T motor! I used some foam rubber I had lying around for the tyre inserts just to save money but the Tamiya foam inserts are good. I did not fit the servo saver hop-up. All the best!

  • @mitchmurda8749
    @mitchmurda8749 2 года назад +1

    Is there anyway you can tell me what size bearings to get?

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Hi Mitch. You need the following bearings for a TT02:
      1050 = 10x5mm (x8)
      1150 = 11x5mm (x4)
      1280 = 12x8mm (x4)
      I hope this answers your question. :)

  • @stilltlrforlife
    @stilltlrforlife 2 года назад +1

    Its a decent budget kit, however one thing I wish it came with was a ball differential, they are much better for on road racing. I would make a gasket and use diff oil in the diffs. Although if you're not recent competitively and just bashing it really doesn't matter what you do with the differentials,

    • @MarkBryanRC
      @MarkBryanRC  2 года назад

      Hi there, yeah it sure is a decent kit for the price. I suppose a ball diff is more expensive so they give us plastic gears! I reckon it would be hard to seal the stock diffs, especially where the output cups fit. As you say, this is OK stock if you are just bashing it! Cheers 🍻 ✌👍

    • @stilltlrforlife
      @stilltlrforlife 2 года назад +1

      @@MarkBryanRC Have to do some modifications on the inside for an o ring to seat on the output side possibly, still a noce build you did though!

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      @@stilltlrforlife Good thinking, dude! Yeah, an O ring is needed. Thanks! :)

    • @stilltlrforlife
      @stilltlrforlife 2 года назад +1

      @@MarkBryanRC Yep, thats how the TLR differentials are sealed on the 8th scale buggy and truggy. Take care buddy, have fun!!

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      @@stilltlrforlife Yeah, I think they are like that in my XV01, too! Cheers, buddy, have a great evening! :)

  • @JedociderShou
    @JedociderShou 3 года назад +1

    How about a dirt cheap brushless? Is it not better than brushed one? Or is it not safe?

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Good point! I do run brushless motors in some of my cars. Honestly, this video was about cheap upgrades, and you'll never get a brushless setup for the £9 I spent on the Eco Thrust motor. Also, if you go crazy with brushless power, the first thing that happens is that the ring gears bevel gears (at the end of the propshaft) start slipping and shedding their teeth! So I wouldn't go lower that say a 15T brushless setup. Thanks for the question - all the best!

    • @JedociderShou
      @JedociderShou 3 года назад +1

      @@MarkBryanRC I see well yeah you do need a brushless esc for a brushless motor and yes a 25k £9 brushed motor will be more cost effective than a brushless setup, a lot safer for the parts too. Anyway nice build can't wait to see it rip!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +1

      Thanks, yes I'm looking forward to the first run, too - if it ever stops raining here!!! :D

    • @schuttrostig5729
      @schuttrostig5729 2 года назад

      Yes i have seen some cheap brushless motors now, so that definetly is an idea. Make sure to have a sensor cable as well, as the kit included esc comes without. Also while the included ESC can run a brushless motor its not overly good at it, so youll need motor and ESC if you want full brushless power.

  • @RC1oNeTV
    @RC1oNeTV 3 года назад +2

    What a interesting video~~My friend~! Very nice~~!!

    • @MarkBryanRC
      @MarkBryanRC  3 года назад

      Thank you very much my friend - cheers! 🤗

  • @HARKAICHRIS
    @HARKAICHRIS Год назад +1

    hi mark
    it might already be on here somewhere but can you tell me where to get the machine screws from and which sizes are required. getting my first tt02 soon. going to do full upgrades. would it still be viable to buy a kit to start with or just buy everything separate? any info a help to a newbie.
    p.s got the tt02 instructions on pdf

    • @MarkBryanRC
      @MarkBryanRC  Год назад

      Hi there! Here is a link to the supplier I use on eBay for those stainless screws. www.ebay.co.uk/itm/181024489629
      They are the cheapest I've found - £2.82 for 50 M3x10mm button head screws! And a pack of 100 is only a few pence more! Free postage!
      They don't do packs for Tamiya kits, you just have to buy M3 screws of different lengths to match the length of the ones in the kit. I buy packs of 8mm, 10mm, 12mm and 15mm screws and just use the Tamiya ones for longer screws as there is usually only a few long ones.
      It's definitely much cheaper to buy a kit rather than buying separate parts.
      Hope this helps - cheers!

  • @coopersharp2921
    @coopersharp2921 2 года назад +1

    What size shocks are those? Are 55mm better, or a different size for rally?

    • @MarkBryanRC
      @MarkBryanRC  2 года назад +1

      Hi there! The shocks are 55mm but you can go up to 60mm for a rally setup. 😉

    • @coopersharp2921
      @coopersharp2921 2 года назад +1

      @@MarkBryanRC thanks!

  • @RCJunky
    @RCJunky 3 года назад +2

    D5 will stop the drive shafts in the front axle popping out of locking up. yes they do restrict the steering. By removing it you nee to set your end points.

    • @MarkBryanRC
      @MarkBryanRC  3 года назад +2

      Thanks for the heads-up, yes it's always wise to set the end points anyway. TBH, I never had a problem with the front axles. Cheers! 👍