Nice Guys! This is the first rc chassis my students build after learning to build/fly/repair flitetest. We currently have 45+ running in our Eurotruck racing series, with a lapmonitor system on our Pool noodle/pvc track…..with Michelin tire bridge😎……my student learned that just as in flying…..it’s the Pilot……not the bearings😎😊
Buckees lol. I've got hoodies and shirts for the family from buckees. 😎 1 tip I got for building kits are flush cut snippers. I cannot stand the nubs and those will cut the pieces loose from the trees almost flawlessly. Otherwise you've gotta sit there and trim them all with a knife and that adds a lot of time. Might just be me but I can't stand the nubs left on the pieces lol
In the mechanical part only of the TT02, my personal record is 34 minutes, plus the installation of electronic parts 18 minutes... times without any type of work on the body. I was inspired that day lol!!
Nice job on the build.I wish as you have suggested before.I wish all builds,and parts would come with instructions.I am thinking of accessories for the scx24. Oh also nice haircut ext.makes you look younger. Great video as all ways. Happy New Years to the both of you and your families and subscribers.Stay safe,and Happy RC.☮
@@andrewortiz687 I've my car built but haven't actually got it going yet. still a shelf queen. I'm no expert on servos and generally use the more basic ones. do the job for what I do
I like the TT-02. I do measure the bearings with calipers (yes always replace the kit crap) some are close in size. I also have always replaced the shocks. Tons of upgrade parts for cheap to have fun doing.
I built my honda civic eg6 in a 3 days of 3 hours each. Put a beautiful yellow on it. It's a beast. it's the "drift" edition even though it's 4wd so I'd rather call it a powerslide kit.
Looks great! I've literally never built an RC, but I'm getting closer to building up the courage to do so. I think we all need an Ethan to build an RC with 😉
PLEASE!! Post a video of how to do the magnetic body mounts. I've got a tt02 drift chassis I just built with me kid and I do not want the body posts going through that sweet sweet civic hatch body!!!
Takes me about an hour an half to build one (chassis that is) an don't need the instructions but do have to look at it to see what wheelbase it is etc that's it, I built 17 TT02 kits last year the body decals is the longest part especially on race cars
Just bought a TT-02 kit but I got a little scared when I read the instructions. Is it really that hard to assemble all the electric parts and some of the other harder stuff.
I like to only use hand screw driver going in to plastic not power tools just me. Never want to strip out the plastic but as I say just me being cautious when building the chassis parts great job anyway.
Buckee's 😝can the beaver come out and play? I got railroaded into buying a TT-02-E just to get the body out of the kit to mount on a MST chassis. ( Beaver, mount. See what I did there?) So I have this TT-02 chassis that I didn't have a use for and the market is flooded with these things so about nothing for a resale value. So it went in the storage room. I have seen videos on RUclips of these cars being modified into competent drift cars, not great but reasonable as a entry level drift car at minimum expense. I am going to steering rack and links and upper arms for the front suspension and delete the front differential. Bargain basement drift car.
I connected mine on Green = Blue then Yellow = Yellow.. but the car won't move and i'm just getting a beeping sound from the motor. steering works though. can anyone help?
The block Audi👍👍nice job guys
Thanks!!
"Way too much... Perfect." Nice VGG reference there guys, I got a good laugh out of that one.
Nice Guys!
This is the first rc chassis my students build after learning to build/fly/repair flitetest. We currently have 45+ running in our Eurotruck racing series, with a lapmonitor system on our Pool noodle/pvc track…..with Michelin tire bridge😎……my student learned that just as in flying…..it’s the Pilot……not the bearings😎😊
Very cool!
Lia’s Burgundy Nice one guys can’t stop life 😔 happening . What a guy and family 🙏🏼
Ethan killed it on the paint. Good job fellas
Thanks! We have a crazy project coming up
Buckees lol. I've got hoodies and shirts for the family from buckees. 😎 1 tip I got for building kits are flush cut snippers. I cannot stand the nubs and those will cut the pieces loose from the trees almost flawlessly. Otherwise you've gotta sit there and trim them all with a knife and that adds a lot of time. Might just be me but I can't stand the nubs left on the pieces lol
Yup. Especially the drive shafts and hubs. Basically anything that spins.
In the mechanical part only of the TT02, my personal record is 34 minutes, plus the installation of electronic parts 18 minutes... times without any type of work on the body. I was inspired that day lol!!
Sheesh. Not your first rodeo!
It's Leah Block's UrQ, nice tribute. Good job guys
Yup!
"Hoonin!" Rip Ken Block! If there is an afterlife.. he's up there rippin donuts!
💯
Thank you for sharing this. Also the bearing kit is a great upgrade. Keep it up
It sure is
Nice job on the build.I wish as you have suggested before.I wish all builds,and parts would come with instructions.I am thinking of accessories for the scx24. Oh also nice haircut ext.makes you look younger. Great video as all ways. Happy New Years to the both of you and your families and subscribers.Stay safe,and Happy RC.☮
I recently built an Injora trailer. Zero instructions. I had to use photos to figure out how it all went together. Happy new year to you too brother.
RIP ken block , he built that audi with his daughter as her first car
Yup. We were devastated (like so many others) to hear of his passing.
the Audi quattro
thanks for the video. I've a tt02 kit ready to build
What servio did you use in yours? I’m shopping and jumping back into the hobby after 4 years and 3 stolen cars
What do you recommend
@@andrewortiz687 I've my car built but haven't actually got it going yet. still a shelf queen. I'm no expert on servos and generally use the more basic ones. do the job for what I do
@@richardbeattie5575 I think I’ll go the same route then and just choose a decently priced option
Thanks!
I like the TT-02. I do measure the bearings with calipers (yes always replace the kit crap) some are close in size. I also have always replaced the shocks. Tons of upgrade parts for cheap to have fun doing.
Good afternoon brother always cool video
I built my honda civic eg6 in a 3 days of 3 hours each. Put a beautiful yellow on it. It's a beast. it's the "drift" edition even though it's 4wd so I'd rather call it a powerslide kit.
Yellow is my favorite color for a civic!
Looks great! I've literally never built an RC, but I'm getting closer to building up the courage to do so. I think we all need an Ethan to build an RC with 😉
Yup. I got lucky.
PLEASE!! Post a video of how to do the magnetic body mounts. I've got a tt02 drift chassis I just built with me kid and I do not want the body posts going through that sweet sweet civic hatch body!!!
ruclips.net/video/g0PB7R8pjFc/видео.html
14:49
@@10thScaleGarage awesome!! Thanks man!!
Front foam bumper is so old fashion but works perfectly even in 2024 like it worked in 1999
Hey what tools would you recommend for this that are commonly used amongst these rc platforms
Looks noice! Needs some PS31 Smoke to add to scalism.
Agreed.
Enjoy the weekend great channel
Thanks, you too!
Lia block’s Audi! Sick!!!
Yup!
LIA BLOCKS AUDI so fire great build
Takes me about an hour an half to build one (chassis that is) an don't need the instructions but do have to look at it to see what wheelbase it is etc that's it, I built 17 TT02 kits last year the body decals is the longest part especially on race cars
Nice! I think I’ve done it in about that amount of time, but I’m usually not filming when I do it. Haha.
Just bought a TT-02 kit but I got a little scared when I read the instructions. Is it really that hard to assemble all the electric parts and some of the other harder stuff.
Nice paint job
That’s all Ethan.
I like to only use hand screw driver going in to plastic not power tools just me. Never want to strip out the plastic but as I say just me being cautious when building the chassis parts great job anyway.
The real question...
Hie long does it take to apply all the stickers on a rally car?
I told you guys that once you built your first Tamiya, you'd be hooked. Lol
You were absolutely correct.
Cutting the stickers and placing on the body can take as long as building the chassis.....
Awesome job! What size hex hubs does it come with? Thanks!
12mm
where do i put the green wire from the motor?
What process do u use for the diffs no matter what I do I can’t get past putting the diff cover on without something binding
Hmmm. Are you using the right spider gears?
great job on the build...i don't have the nerves to do that myself lol
If I can do it, you definitely can.
Its easy. Just 1 step at a time 😎
Nice car
It's Lias ❤
#43FOREVER
Looks good, and another 2 hours or more if you cut out all the body decals/stickers and put them on, that was the longest part for me
Same.
Have a good time
I noticed that arrma talion box, do I know something I shouldn’t?
Soon.
Dude, the chassis you built had gold colored rims. But that's not what was seen after the shells were placed on the chassis. WTF!?
Buckee's 😝can the beaver come out and play?
I got railroaded into buying a TT-02-E just to get the body out of the kit to mount on a MST chassis. ( Beaver, mount. See what I did there?) So I have this TT-02 chassis that I didn't have a use for and the market is flooded with these things so about nothing for a resale value. So it went in the storage room. I have seen videos on RUclips of these cars being modified into competent drift cars, not great but reasonable as a entry level drift car at minimum expense.
I am going to steering rack and links and upper arms for the front suspension and delete the front differential. Bargain basement drift car.
Do it! What body did you harvest?
I connected mine on Green = Blue then Yellow = Yellow.. but the car won't move and i'm just getting a beeping sound from the motor. steering works though. can anyone help?
Does the same thing happen when you reverse them?
@@10thScaleGarage yes
Tried calibraging it, still the same
Wayyy to much, perfect lol VGG fan?
Lia block audi 🔥
My old D Class Mercedes-Benz was to legit awd and fast as ahit for the yr 2000
Love those things.
I like color
👍👍
🙏🏼❤️🙌🏼
Thanks!
13 seconds
And I’m spent.
How about 5 hours to build
Not bad!
R.I.P. Ken
He was a huge inspiration to us.
@@10thScaleGarage Same, KILL ALL TIRES
About.. Forever lol
Never use power tools on an RC model!🤯
Lia blocks audi quattro RIP Ken block!